include/configs: Remove CONFIG_SYS_64BIT_VSPRINTF

This define does not control anything, remove it.
Signed-off-by: NTom Rini <trini@ti.com>

include/configs/P1023RDS.h

@@ -310,7 +310,6 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_OF_BOARD_SETUP
 #define CONFIG_OF_STDOUT_VIA_ALIAS
 
-#define CONFIG_SYS_64BIT_VSPRINTF
 #define CONFIG_SYS_64BIT_STRTOUL
 
 /* new uImage format support */

include/configs/P2020COME.h

@@ -416,7 +416,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #endif
 
 /* Misc Extra Settings */
-#define CONFIG_SYS_64BIT_VSPRINTF	1
 #define CONFIG_SYS_64BIT_STRTOUL	1
 #define CONFIG_CMD_DHCP			1
 

include/configs/am3517_crane.h

@@ -174,7 +174,6 @@
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of */
 							/* NAND devices */
-#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 
 #define CONFIG_JFFS2_NAND
 /* nand device jffs2 lives on */

include/configs/am3517_evm.h

@@ -173,8 +173,6 @@
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of */
 							/* NAND devices */
-#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
-
 #define CONFIG_JFFS2_NAND
 /* nand device jffs2 lives on */
 #define CONFIG_JFFS2_DEV		"nand0"

include/configs/at91sam9263ek.h

@@ -283,8 +283,6 @@
 #define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
 #define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIN_PD15
 #define CONFIG_SYS_NAND_READY_PIN		AT91_PIN_PA22
-
-#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 /* Ethernet */

include/configs/da830evm.h

@@ -111,7 +111,6 @@
 #define CONFIG_SYS_NAND_CS		3
 #define CONFIG_SYS_NAND_BASE		DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
 #define CONFIG_SYS_NAND_PAGE_2K
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 #define CONFIG_SYS_CLE_MASK		0x10
 #define CONFIG_SYS_ALE_MASK		0x8
 #define CONFIG_SYS_MAX_NAND_DEVICE	1 /* Max number of NAND devices */

include/configs/ea20.h

@@ -203,7 +203,6 @@
 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
 #define	CONFIG_SYS_NAND_USE_FLASH_BBT
 #define CONFIG_SYS_MAX_NAND_DEVICE	1 /* Max number of NAND devices */
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 #endif
 
 /* SPI Flash */

include/configs/eb_cpux9k2.h

@@ -288,8 +288,6 @@
 #define CONFIG_SYS_NAND_BASE		0x40000000
 #define CONFIG_SYS_NAND_DBW_8		1
 
-#define CONFIG_SYS_64BIT_VSPRINTF	1
-
 /* Status LED's */
 
 #define CONFIG_STATUS_LED		1

include/configs/flea3.h

@@ -48,8 +48,6 @@
 /* Set TEXT at the beginning of the NOR flash */
 #define CONFIG_SYS_TEXT_BASE	0xA0000000
 
-#define CONFIG_SYS_64BIT_VSPRINTF
-
 /* This is required to setup the ESDC controller */
 #define CONFIG_BOARD_EARLY_INIT_F
 

include/configs/hawkboard.h

@@ -127,7 +127,6 @@
 #define CFG_DAVINCI_STD_NAND_LAYOUT
 #define CONFIG_SYS_NAND_CS		3
 #define CONFIG_SYS_NAND_PAGE_2K
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 /* Max number of NAND devices */
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE_LIST	{ 0x62000000, }

include/configs/imx27lite-common.h

@@ -153,7 +153,6 @@
 #define CONFIG_SYS_NAND_BASE		0xd8000000
 #define CONFIG_JFFS2_NAND
 #define CONFIG_MXC_NAND_HWECC
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
 
 /*
  * SD/MMC

include/configs/mcx.h

@@ -171,8 +171,6 @@
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of */
 							/* NAND devices */
-#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
-
 #define CONFIG_JFFS2_NAND
 /* nand device jffs2 lives on */
 #define CONFIG_JFFS2_DEV		"nand0"

include/configs/meesc.h

@@ -164,7 +164,6 @@
 # define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
 # define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIO_PORTD, 15
 # define CONFIG_SYS_NAND_READY_PIN		AT91_PIO_PORTA, 22
-# define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 /* Ethernet */

include/configs/mv-common.h

@@ -132,7 +132,6 @@
  */
 #ifdef CONFIG_CMD_NAND
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_SYS_64BIT_VSPRINTF      /* needed for nand_util.c */
 #endif
 
 /*

include/configs/mx25pdk.h

@@ -65,7 +65,6 @@
 #define CONFIG_ENV_IS_NOWHERE
 
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_SYS_64BIT_VSPRINTF
 
 /* U-Boot general configuration */
 #define CONFIG_SYS_PROMPT	"MX25PDK U-Boot > "

include/configs/mx35pdk.h

@@ -39,8 +39,6 @@
 #define CONFIG_SYS_TEXT_BASE	0xA0000000
 #define CONFIG_SYS_CACHELINE_SIZE	32
 
-#define CONFIG_SYS_64BIT_VSPRINTF
-
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_LATE_INIT
 

include/configs/otc570.h

@@ -215,7 +215,6 @@
 # define CONFIG_SYS_NAND_MASK_CLE		(1 << 22)
 # define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIO_PORTD, 15
 # define CONFIG_SYS_NAND_READY_PIN		AT91_PIO_PORTA, 22
-# define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 #endif
 
 /* Ethernet */

include/configs/p1_p2_rdb_pc.h

@@ -534,7 +534,6 @@
 #define CONFIG_OF_BOARD_SETUP
 #define CONFIG_OF_STDOUT_VIA_ALIAS
 
-#define CONFIG_SYS_64BIT_VSPRINTF
 #define CONFIG_SYS_64BIT_STRTOUL
 
 /* new uImage format support */

include/configs/spear-common.h

@@ -196,7 +196,6 @@
 #define CONFIG_SYS_BARGSIZE			CONFIG_SYS_CBSIZE
 #define CONFIG_SYS_LOAD_ADDR			0x00800000
 #define CONFIG_SYS_CONSOLE_INFO_QUIET		1
-#define CONFIG_SYS_64BIT_VSPRINTF		1
 
 #define CONFIG_EXTRA_ENV_SETTINGS		CONFIG_EXTRA_ENV_USBTTY
 

include/configs/tam3517-common.h

@@ -146,7 +146,6 @@
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of */
 							/* NAND devices */
-#define CONFIG_SYS_64BIT_VSPRINTF		/* needed for nand_util.c */
 
 #define CONFIG_AUTO_COMPLETE
 

include/configs/tx25.h

@@ -117,8 +117,6 @@
 #define CONFIG_MXC_NAND_HWECC
 #define CONFIG_SYS_NAND_LARGEPAGE
 
-#define CONFIG_SYS_64BIT_VSPRINTF
-
 /* U-Boot general configuration */
 #define CONFIG_SYS_PROMPT	"=> "	/* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size  */

include/configs/zmx25.h

@@ -93,8 +93,6 @@
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_CACHE
 
-#define CONFIG_SYS_64BIT_VSPRINTF
-
 /*
  * Additional command
  */