armv7R: K3: j721e: Add support for boot device detection

J721E allows for booting from primary or backup boot media.
Both media can be chosen individually based on switch settings.
ROM looks for a valid image in primary boot media, if not found
then looks in backup boot media. In order to pass this boot media
information to boot loader, ROM stores a value at a particular
address. Add support for reading this information and determining
the boot media correctly.
Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: NAndreas Dannenberg <dannenberg@ti.com>
Signed-off-by: NFaiz Abbas <faiz_abbas@ti.com>

arch/arm/mach-k3/include/mach/hardware.h

@@ -9,4 +9,8 @@
 #ifdef CONFIG_SOC_K3_AM6
 #include "am6_hardware.h"
 #endif
+
+#ifdef CONFIG_SOC_K3_J721E
+#include "j721e_hardware.h"
+#endif
 #endif /* _ASM_ARCH_HARDWARE_H_ */

arch/arm/mach-k3/include/mach/j721e_hardware.h

+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * K3: J721E SoC definitions, structures etc.
+ *
+ * (C) Copyright (C) 2018-2019 Texas Instruments Incorporated - http://www.ti.com/
+ */
+#ifndef __ASM_ARCH_J721E_HARDWARE_H
+#define __ASM_ARCH_J721E_HARDWARE_H
+
+#include <config.h>
+
+#define CTRL_MMR0_BASE					0x00100000
+#define CTRLMMR_MAIN_DEVSTAT				(CTRL_MMR0_BASE + 0x30)
+
+#define MAIN_DEVSTAT_BOOT_MODE_B_MASK		BIT(0)
+#define MAIN_DEVSTAT_BOOT_MODE_B_SHIFT		0
+#define MAIN_DEVSTAT_BKUP_BOOTMODE_MASK		GENMASK(3, 1)
+#define MAIN_DEVSTAT_BKUP_BOOTMODE_SHIFT	1
+#define MAIN_DEVSTAT_PRIM_BOOTMODE_MMC_PORT_MASK	BIT(6)
+#define MAIN_DEVSTAT_PRIM_BOOTMODE_PORT_SHIFT		6
+
+#define WKUP_CTRL_MMR0_BASE				0x43000000
+#define MCU_CTRL_MMR0_BASE				0x40f00000
+
+#define CTRLMMR_WKUP_DEVSTAT			(WKUP_CTRL_MMR0_BASE + 0x30)
+#define WKUP_DEVSTAT_PRIMARY_BOOTMODE_MASK	GENMASK(5, 3)
+#define WKUP_DEVSTAT_PRIMARY_BOOTMODE_SHIFT	3
+#define WKUP_DEVSTAT_MCU_OMLY_MASK		BIT(6)
+#define WKUP_DEVSTAT_MCU_ONLY_SHIFT		6
+
+/*
+ * The CTRL_MMR0 memory space is divided into several equally-spaced
+ * partitions, so defining the partition size allows us to determine
+ * register addresses common to those partitions.
+ */
+#define CTRL_MMR0_PARTITION_SIZE			0x4000
+
+/*
+ * CTRL_MMR0, WKUP_CTRL_MMR0, and MCU_CTR_MMR0 lock/kick-mechanism
+ * shared register definitions.
+ */
+#define CTRLMMR_LOCK_KICK0				0x01008
+#define CTRLMMR_LOCK_KICK0_UNLOCK_VAL			0x68ef3490
+#define CTRLMMR_LOCK_KICK0_UNLOCKED_MASK		BIT(0)
+#define CTRLMMR_LOCK_KICK0_UNLOCKED_SHIFT		0
+#define CTRLMMR_LOCK_KICK1				0x0100c
+#define CTRLMMR_LOCK_KICK1_UNLOCK_VAL			0xd172bc5a
+
+#endif /* __ASM_ARCH_J721E_HARDWARE_H */

arch/arm/mach-k3/include/mach/j721e_spl.h

+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2018-2019 Texas Instruments Incorporated - http://www.ti.com/
+ *	Lokesh Vutla <lokeshvutla@ti.com>
+ */
+#ifndef _ASM_ARCH_J721E_SPL_H_
+#define _ASM_ARCH_J721E_SPL_H_
+
+/* With BootMode B = 0 */
+#define BOOT_DEVICE_HYPERFLASH		0x00
+#define BOOT_DEVICE_OSPI		0x01
+#define BOOT_DEVICE_QSPI		0x02
+#define BOOT_DEVICE_SPI			0x03
+#define BOOT_DEVICE_ETHERNET		0x04
+#define BOOT_DEVICE_I2C			0x06
+#define BOOT_DEVICE_UART		0x07
+
+/* With BootMode B = 1 */
+#define BOOT_DEVICE_MMC2		0x10
+#define BOOT_DEVICE_MMC1		0x11
+#define BOOT_DEVICE_USB			0x12
+#define BOOT_DEVICE_UFS			0x13
+#define BOOT_DEVIE_GPMC			0x14
+#define BOOT_DEVICE_PCIE		0x15
+#define BOOT_DEVICE_MMC2_2		0x16
+#define BOOT_DEVICE_RAM			0x17
+
+#define BOOT_MODE_B_SHIFT		4
+#define BOOT_MODE_B_MASK		BIT(4)
+
+#endif

arch/arm/mach-k3/include/mach/spl.h

@@ -9,4 +9,8 @@
 #ifdef CONFIG_SOC_K3_AM6
 #include "am6_spl.h"
 #endif
+
+#ifdef CONFIG_SOC_K3_J721E
+#include "j721e_spl.h"
+#endif
 #endif /* _ASM_ARCH_SPL_H_ */

arch/arm/mach-k3/j721e_init.c

@@ -10,6 +10,7 @@
 #include <spl.h>
 #include <asm/io.h>
 #include <asm/armv7_mpu.h>
+#include <asm/arch/hardware.h>
 #include "common.h"
 
 #ifdef CONFIG_SPL_BUILD
@@ -31,4 +32,56 @@ void board_init_f(ulong dummy)
 	/* Prepare console output */
 	preloader_console_init();
 }
+
+u32 spl_boot_mode(const u32 boot_device)
+{
+	switch (boot_device) {
+	case BOOT_DEVICE_MMC1:
+		return MMCSD_MODE_EMMCBOOT;
+	case BOOT_DEVICE_MMC2:
+		return MMCSD_MODE_FS;
+	default:
+		return MMCSD_MODE_RAW;
+	}
+}
+
+static u32 __get_primary_bootmedia(u32 main_devstat, u32 wkup_devstat)
+{
+
+	u32 bootmode = (wkup_devstat & WKUP_DEVSTAT_PRIMARY_BOOTMODE_MASK) >>
+			WKUP_DEVSTAT_PRIMARY_BOOTMODE_SHIFT;
+
+	bootmode |= (main_devstat & MAIN_DEVSTAT_BOOT_MODE_B_MASK) <<
+			BOOT_MODE_B_SHIFT;
+
+	if (bootmode == BOOT_DEVICE_OSPI || bootmode ==	BOOT_DEVICE_QSPI)
+		bootmode = BOOT_DEVICE_SPI;
+
+	if (bootmode == BOOT_DEVICE_MMC2) {
+		u32 port = (main_devstat &
+			    MAIN_DEVSTAT_PRIM_BOOTMODE_MMC_PORT_MASK) >>
+			   MAIN_DEVSTAT_PRIM_BOOTMODE_PORT_SHIFT;
+		if (port == 0x0)
+			bootmode = BOOT_DEVICE_MMC1;
+	}
+
+	return bootmode;
+}
+
+u32 spl_boot_device(void)
+{
+	u32 wkup_devstat = readl(CTRLMMR_WKUP_DEVSTAT);
+	u32 main_devstat;
+
+	if (wkup_devstat & WKUP_DEVSTAT_MCU_OMLY_MASK) {
+		printf("ERROR: MCU only boot is not yet supported\n");
+		return BOOT_DEVICE_RAM;
+	}
+
+	/* MAIN CTRL MMR can only be read if MCU ONLY is 0 */
+	main_devstat = readl(CTRLMMR_MAIN_DEVSTAT);
+
+	/* ToDo: Add support for backup boot media */
+	return __get_primary_bootmedia(main_devstat, wkup_devstat);
+}
 #endif