mx6: Add support for the mx6solox variant

mx6solox is the newest member of the mx6 family.

Some of the new features on this variants are:
- Cortex M4 microcontroller (besides the CortexA9)
- Dual Gigabit Ethernet

Add the initial support for it.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>

arch/arm/cpu/armv7/mx6/clock.c

@@ -214,7 +214,7 @@ static u32 get_uart_clk(void)
 	u32 reg, uart_podf;
 	u32 freq = decode_pll(PLL_USBOTG, MXC_HCLK) / 6; /* static divider */
 	reg = __raw_readl(&imx_ccm->cscdr1);
-#ifdef CONFIG_MX6SL
+#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX))
 	if (reg & MXC_CCM_CSCDR1_UART_CLK_SEL)
 		freq = MXC_HCLK;
 #endif
@@ -282,7 +282,7 @@ static u32 get_emi_slow_clk(void)
 	return root_freq / (emi_slow_podf + 1);
 }
 
-#ifdef CONFIG_MX6SL
+#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX))
 static u32 get_mmdc_ch0_clk(void)
 {
 	u32 cbcmr = __raw_readl(&imx_ccm->cbcmr);

arch/arm/cpu/armv7/mx6/soc.c

@@ -79,9 +79,15 @@ u32 __weak get_board_rev(void)
 void init_aips(void)
 {
 	struct aipstz_regs *aips1, *aips2;
+#ifdef CONFIG_MX6SX
+	struct aipstz_regs *aips3;
+#endif
 
 	aips1 = (struct aipstz_regs *)AIPS1_BASE_ADDR;
 	aips2 = (struct aipstz_regs *)AIPS2_BASE_ADDR;
+#ifdef CONFIG_MX6SX
+	aips3 = (struct aipstz_regs *)AIPS3_BASE_ADDR;
+#endif
 
 	/*
 	 * Set all MPROTx to be non-bufferable, trusted for R/W,
@@ -107,6 +113,26 @@ void init_aips(void)
 	writel(0x00000000, &aips2->opacr2);
 	writel(0x00000000, &aips2->opacr3);
 	writel(0x00000000, &aips2->opacr4);
+
+#ifdef CONFIG_MX6SX
+	/*
+	 * Set all MPROTx to be non-bufferable, trusted for R/W,
+	 * not forced to user-mode.
+	 */
+	writel(0x77777777, &aips3->mprot0);
+	writel(0x77777777, &aips3->mprot1);
+
+	/*
+	 * Set all OPACRx to be non-bufferable, not require
+	 * supervisor privilege level for access,allow for
+	 * write access and untrusted master access.
+	 */
+	writel(0x00000000, &aips3->opacr0);
+	writel(0x00000000, &aips3->opacr1);
+	writel(0x00000000, &aips3->opacr2);
+	writel(0x00000000, &aips3->opacr3);
+	writel(0x00000000, &aips3->opacr4);
+#endif
 }
 
 static void clear_ldo_ramp(void)

arch/arm/imx-common/cpu.c

@@ -112,6 +112,8 @@ const char *get_imx_type(u32 imxtype)
 		return "6SOLO";	/* Solo version of the mx6 */
 	case MXC_CPU_MX6SL:
 		return "6SL";	/* Solo-Lite version of the mx6 */
+	case MXC_CPU_MX6SX:
+		return "6SX";   /* SoloX version of the mx6 */
 	case MXC_CPU_MX51:
 		return "51";
 	case MXC_CPU_MX53:

arch/arm/include/asm/arch-imx/cpu.h

@@ -8,6 +8,7 @@
 #define MXC_CPU_MX53		0x53
 #define MXC_CPU_MX6SL		0x60
 #define MXC_CPU_MX6DL		0x61
-#define MXC_CPU_MX6SOLO		0x62
+#define MXC_CPU_MX6SX		0x62
 #define MXC_CPU_MX6Q		0x63
 #define MXC_CPU_MX6D		0x64
+#define MXC_CPU_MX6SOLO		0x65 /* dummy ID */

arch/arm/include/asm/arch-mx6/imx-regs.h

@@ -19,6 +19,19 @@
 #define GPU_2D_ARB_END_ADDR             0x02203FFF
 #define OPENVG_ARB_BASE_ADDR            0x02204000
 #define OPENVG_ARB_END_ADDR             0x02207FFF
+#elif CONFIG_MX6SX
+#define CAAM_ARB_BASE_ADDR              0x00100000
+#define CAAM_ARB_END_ADDR               0x00107FFF
+#define GPU_ARB_BASE_ADDR               0x01800000
+#define GPU_ARB_END_ADDR                0x01803FFF
+#define APBH_DMA_ARB_BASE_ADDR          0x01804000
+#define APBH_DMA_ARB_END_ADDR           0x0180BFFF
+#define M4_BOOTROM_BASE_ADDR			0x007F8000
+
+#define MXS_APBH_BASE			APBH_DMA_ARB_BASE_ADDR
+#define MXS_GPMI_BASE			(APBH_DMA_ARB_BASE_ADDR + 0x02000)
+#define MXS_BCH_BASE			(APBH_DMA_ARB_BASE_ADDR + 0x04000)
+
 #else
 #define CAAM_ARB_BASE_ADDR              0x00100000
 #define CAAM_ARB_END_ADDR               0x00103FFF
@@ -39,14 +52,27 @@
 #define MXS_BCH_BASE			(APBH_DMA_ARB_BASE_ADDR + 0x04000)
 
 /* GPV - PL301 configuration ports */
-#ifdef CONFIG_MX6SL
+#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX))
 #define GPV2_BASE_ADDR                  0x00D00000
 #else
 #define GPV2_BASE_ADDR			0x00200000
 #endif
 
+#ifdef CONFIG_MX6SX
+#define GPV3_BASE_ADDR			0x00E00000
+#define GPV4_BASE_ADDR			0x00F00000
+#define GPV5_BASE_ADDR			0x01000000
+#define GPV6_BASE_ADDR			0x01100000
+#define PCIE_ARB_BASE_ADDR              0x08000000
+#define PCIE_ARB_END_ADDR               0x08FFFFFF
+
+#else
 #define GPV3_BASE_ADDR			0x00300000
 #define GPV4_BASE_ADDR			0x00800000
+#define PCIE_ARB_BASE_ADDR              0x01000000
+#define PCIE_ARB_END_ADDR               0x01FFFFFF
+#endif
+
 #define IRAM_BASE_ADDR			0x00900000
 #define SCU_BASE_ADDR                   0x00A00000
 #define IC_INTERFACES_BASE_ADDR         0x00A00100
@@ -56,13 +82,21 @@
 #define L2_PL310_BASE			0x00A02000
 #define GPV0_BASE_ADDR                  0x00B00000
 #define GPV1_BASE_ADDR                  0x00C00000
-#define PCIE_ARB_BASE_ADDR              0x01000000
-#define PCIE_ARB_END_ADDR               0x01FFFFFF
 
 #define AIPS1_ARB_BASE_ADDR             0x02000000
 #define AIPS1_ARB_END_ADDR              0x020FFFFF
 #define AIPS2_ARB_BASE_ADDR             0x02100000
 #define AIPS2_ARB_END_ADDR              0x021FFFFF
+#ifdef CONFIG_MX6SX
+#define AIPS3_BASE_ADDR			0x02200000
+#define AIPS3_END_ADDR			0x022FFFFF
+#define WEIM_ARB_BASE_ADDR              0x50000000
+#define WEIM_ARB_END_ADDR               0x57FFFFFF
+#define QSPI1_ARB_BASE_ADDR             0x60000000
+#define QSPI1_ARB_END_ADDR              0x6FFFFFFF
+#define QSPI2_ARB_BASE_ADDR             0x70000000
+#define QSPI2_ARB_END_ADDR              0x7FFFFFFF
+#else
 #define SATA_ARB_BASE_ADDR              0x02200000
 #define SATA_ARB_END_ADDR               0x02203FFF
 #define OPENVG_ARB_BASE_ADDR            0x02204000
@@ -75,8 +109,9 @@
 #define IPU2_ARB_END_ADDR               0x02BFFFFF
 #define WEIM_ARB_BASE_ADDR              0x08000000
 #define WEIM_ARB_END_ADDR               0x0FFFFFFF
+#endif
 
-#ifdef CONFIG_MX6SL
+#if (defined(CONFIG_MX6SL) || defined(CONFIG_MX6SX))
 #define MMDC0_ARB_BASE_ADDR             0x80000000
 #define MMDC0_ARB_END_ADDR              0xFFFFFFFF
 #define MMDC1_ARB_BASE_ADDR             0xC0000000
@@ -88,8 +123,10 @@
 #define MMDC1_ARB_END_ADDR              0xFFFFFFFF
 #endif
 
+#ifndef CONFIG_MX6SX
 #define IPU_SOC_BASE_ADDR		IPU1_ARB_BASE_ADDR
 #define IPU_SOC_OFFSET			0x00200000
+#endif
 
 /* Defines for Blocks connected via AIPS (SkyBlue) */
 #define ATZ1_BASE_ADDR              AIPS1_ARB_BASE_ADDR
@@ -112,7 +149,9 @@
 #define UART3_IPS_BASE_ADDR         (ATZ1_BASE_ADDR + 0x34000)
 #define UART4_IPS_BASE_ADDR         (ATZ1_BASE_ADDR + 0x38000)
 #else
+#ifndef CONFIG_MX6SX
 #define ECSPI5_BASE_ADDR            (ATZ1_BASE_ADDR + 0x18000)
+#endif
 #define UART1_BASE                  (ATZ1_BASE_ADDR + 0x20000)
 #define ESAI1_BASE_ADDR             (ATZ1_BASE_ADDR + 0x24000)
 #define SSI1_BASE_ADDR              (ATZ1_BASE_ADDR + 0x28000)
@@ -121,8 +160,10 @@
 #define ASRC_BASE_ADDR              (ATZ1_BASE_ADDR + 0x34000)
 #endif
 
+#ifndef CONFIG_MX6SX
 #define SPBA_BASE_ADDR              (ATZ1_BASE_ADDR + 0x3C000)
 #define VPU_BASE_ADDR               (ATZ1_BASE_ADDR + 0x40000)
+#endif
 #define AIPS1_ON_BASE_ADDR          (ATZ1_BASE_ADDR + 0x7C000)
 
 #define AIPS1_OFF_BASE_ADDR         (ATZ1_BASE_ADDR + 0x80000)
@@ -157,6 +198,13 @@
 #define CSI_BASE_ADDR               (AIPS1_OFF_BASE_ADDR + 0x64000)
 #define SIPIX_BASE_ADDR             (AIPS1_OFF_BASE_ADDR + 0x68000)
 #define SDMA_PORT_HOST_BASE_ADDR    (AIPS1_OFF_BASE_ADDR + 0x6C000)
+#elif CONFIG_MX6SX
+#define CANFD1_BASE_ADDR            (AIPS1_OFF_BASE_ADDR + 0x68000)
+#define SDMA_BASE_ADDR              (AIPS1_OFF_BASE_ADDR + 0x6C000)
+#define CANFD2_BASE_ADDR            (AIPS1_OFF_BASE_ADDR + 0x70000)
+#define SEMAPHORE1_BASE_ADDR        (AIPS1_OFF_BASE_ADDR + 0x74000)
+#define SEMAPHORE2_BASE_ADDR        (AIPS1_OFF_BASE_ADDR + 0x78000)
+#define RDC_BASE_ADDR               (AIPS1_OFF_BASE_ADDR + 0x7C000)
 #else
 #define DCIC1_BASE_ADDR             (AIPS1_OFF_BASE_ADDR + 0x64000)
 #define DCIC2_BASE_ADDR             (AIPS1_OFF_BASE_ADDR + 0x68000)
@@ -193,6 +241,8 @@
 #define MMDC_P0_BASE_ADDR           (AIPS2_OFF_BASE_ADDR + 0x30000)
 #ifdef CONFIG_MX6SL
 #define RNGB_IPS_BASE_ADDR          (AIPS2_OFF_BASE_ADDR + 0x34000)
+#elif CONFIG_MX6SX
+#define ENET2_BASE_ADDR             (AIPS2_OFF_BASE_ADDR + 0x34000)
 #else
 #define MMDC_P1_BASE_ADDR           (AIPS2_OFF_BASE_ADDR + 0x34000)
 #endif
@@ -202,13 +252,28 @@
 #define CSU_BASE_ADDR               (AIPS2_OFF_BASE_ADDR + 0x40000)
 #define IP2APB_PERFMON1_BASE_ADDR   (AIPS2_OFF_BASE_ADDR + 0x44000)
 #define IP2APB_PERFMON2_BASE_ADDR   (AIPS2_OFF_BASE_ADDR + 0x48000)
+#ifdef CONFIG_MX6SX
+#define DEBUG_MONITOR_BASE_ADDR     (AIPS2_OFF_BASE_ADDR + 0x4C000)
+#else
 #define IP2APB_PERFMON3_BASE_ADDR   (AIPS2_OFF_BASE_ADDR + 0x4C000)
+#endif
 #define IP2APB_TZASC1_BASE_ADDR     (AIPS2_OFF_BASE_ADDR + 0x50000)
+#ifdef CONFIG_MX6SX
+#define SAI1_BASE_ADDR              (AIPS2_OFF_BASE_ADDR + 0x54000)
+#else
 #define IP2APB_TZASC2_BASE_ADDR     (AIPS2_OFF_BASE_ADDR + 0x54000)
+#endif
 #define AUDMUX_BASE_ADDR            (AIPS2_OFF_BASE_ADDR + 0x58000)
+#define AUDMUX_BASE_ADDR            (AIPS2_OFF_BASE_ADDR + 0x58000)
+#ifdef CONFIG_MX6SX
+#define SAI2_BASE_ADDR              (AIPS2_OFF_BASE_ADDR + 0x5C000)
+#define QSPI1_BASE_ADDR             (AIPS2_OFF_BASE_ADDR + 0x60000)
+#define QSPI2_BASE_ADDR             (AIPS2_OFF_BASE_ADDR + 0x64000)
+#else
 #define MIPI_CSI2_BASE_ADDR         (AIPS2_OFF_BASE_ADDR + 0x5C000)
 #define MIPI_DSI_BASE_ADDR          (AIPS2_OFF_BASE_ADDR + 0x60000)
 #define VDOA_BASE_ADDR              (AIPS2_OFF_BASE_ADDR + 0x64000)
+#endif
 #define UART2_BASE                  (AIPS2_OFF_BASE_ADDR + 0x68000)
 #define UART3_BASE                  (AIPS2_OFF_BASE_ADDR + 0x6C000)
 #define UART4_BASE                  (AIPS2_OFF_BASE_ADDR + 0x70000)
@@ -216,10 +281,42 @@
 #define IP2APB_USBPHY1_BASE_ADDR    (AIPS2_OFF_BASE_ADDR + 0x78000)
 #define IP2APB_USBPHY2_BASE_ADDR    (AIPS2_OFF_BASE_ADDR + 0x7C000)
 
+#ifdef CONFIG_MX6SX
+#define GIS_BASE_ADDR               (AIPS3_ARB_BASE_ADDR + 0x04000)
+#define DCIC1_BASE_ADDR             (AIPS3_ARB_BASE_ADDR + 0x0C000)
+#define DCIC2_BASE_ADDR             (AIPS3_ARB_BASE_ADDR + 0x10000)
+#define CSI1_BASE_ADDR              (AIPS3_ARB_BASE_ADDR + 0x14000)
+#define PXP_BASE_ADDR               (AIPS3_ARB_BASE_ADDR + 0x18000)
+#define CSI2_BASE_ADDR              (AIPS3_ARB_BASE_ADDR + 0x1C000)
+#define LCDIF1_BASE_ADDR            (AIPS3_ARB_BASE_ADDR + 0x20000)
+#define LCDIF2_BASE_ADDR            (AIPS3_ARB_BASE_ADDR + 0x24000)
+#define VADC_BASE_ADDR              (AIPS3_ARB_BASE_ADDR + 0x28000)
+#define VDEC_BASE_ADDR              (AIPS3_ARB_BASE_ADDR + 0x2C000)
+#define SPBA_BASE_ADDR              (AIPS3_ARB_BASE_ADDR + 0x3C000)
+#define AIPS3_CONFIG_BASE_ADDR      (AIPS3_ARB_BASE_ADDR + 0x7C000)
+#define ADC1_BASE_ADDR              (AIPS3_ARB_BASE_ADDR + 0x80000)
+#define ADC2_BASE_ADDR              (AIPS3_ARB_BASE_ADDR + 0x84000)
+#define WDOG3_BASE_ADDR             (AIPS3_ARB_BASE_ADDR + 0x88000)
+#define ECSPI5_BASE_ADDR            (AIPS3_ARB_BASE_ADDR + 0x8C000)
+#define HS_BASE_ADDR                (AIPS3_ARB_BASE_ADDR + 0x90000)
+#define MU_MCU_BASE_ADDR            (AIPS3_ARB_BASE_ADDR + 0x94000)
+#define CANFD_BASE_ADDR             (AIPS3_ARB_BASE_ADDR + 0x98000)
+#define MU_DSP_BASE_ADDR            (AIPS3_ARB_BASE_ADDR + 0x9C000)
+#define UART6_BASE_ADDR             (AIPS3_ARB_BASE_ADDR + 0xA0000)
+#define PWM5_BASE_ADDR              (AIPS3_ARB_BASE_ADDR + 0xA4000)
+#define PWM6_BASE_ADDR              (AIPS3_ARB_BASE_ADDR + 0xA8000)
+#define PWM7_BASE_ADDR              (AIPS3_ARB_BASE_ADDR + 0xAC000)
+#define PWM8_BASE_ADDR              (AIPS3_ARB_BASE_ADDR + 0xB0000)
+#endif
+
 #define CHIP_REV_1_0                 0x10
 #define CHIP_REV_1_2                 0x12
 #define CHIP_REV_1_5                 0x15
+#ifndef CONFIG_MX6SX
 #define IRAM_SIZE                    0x00040000
+#else
+#define IRAM_SIZE                    0x00020000
+#endif
 #define FEC_QUIRK_ENET_MAC
 
 #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
@@ -473,6 +570,22 @@ struct fuse_bank0_regs {
 	u32	rsvd7[4];
 };
 
+#ifdef CONFIG_MX6SX
+struct fuse_bank4_regs {
+	u32 sjc_resp_low;
+	u32 rsvd0[3];
+	u32 sjc_resp_high;
+	u32 rsvd1[3];
+	u32 mac_addr_low;
+	u32 rsvd2[3];
+	u32 mac_addr_high;
+	u32 rsvd3[3];
+	u32 mac_addr2;
+	u32 rsvd4[7];
+	u32 gp1;
+	u32 rsvd5[7];
+};
+#else
 struct fuse_bank4_regs {
 	u32	sjc_resp_low;
 	u32     rsvd0[3];
@@ -487,6 +600,7 @@ struct fuse_bank4_regs {
 	u32	gp2;
 	u32	rsvd5[3];
 };
+#endif
 
 struct aipstz_regs {
 	u32	mprot0;

arch/arm/include/asm/arch-mx6/mx6-ddr.h

@@ -13,7 +13,11 @@
 #if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
 #include "mx6dl-ddr.h"
 #else
+#ifdef CONFIG_MX6SX
+#include "mx6sx-ddr.h"
+#else
 #error "Please select cpu"
+#endif	/* CONFIG_MX6SX */
 #endif	/* CONFIG_MX6DL or CONFIG_MX6S */
 #endif	/* CONFIG_MX6Q */
 #else

arch/arm/include/asm/arch-mx6/mx6sx-ddr.h

+/*
+ * Copyright (C) 2014 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __ASM_ARCH_MX6SX_DDR_H__
+#define __ASM_ARCH_MX6SX_DDR_H__
+
+#ifndef CONFIG_MX6SX
+#error "wrong CPU"
+#endif
+
+#define MX6_IOM_DRAM_DQM0	0x020e02ec
+#define MX6_IOM_DRAM_DQM1	0x020e02f0
+#define MX6_IOM_DRAM_DQM2	0x020e02f4
+#define MX6_IOM_DRAM_DQM3	0x020e02f8
+
+#define MX6_IOM_DRAM_RAS	0x020e02fc
+#define MX6_IOM_DRAM_CAS	0x020e0300
+#define MX6_IOM_DRAM_SDODT0	0x020e0310
+#define MX6_IOM_DRAM_SDODT1	0x020e0314
+#define MX6_IOM_DRAM_SDBA2	0x020e0320
+#define MX6_IOM_DRAM_SDCKE0	0x020e0324
+#define MX6_IOM_DRAM_SDCKE1	0x020e0328
+#define MX6_IOM_DRAM_SDCLK_0	0x020e032c
+#define MX6_IOM_DRAM_RESET	0x020e0340
+
+#define MX6_IOM_DRAM_SDQS0	0x020e0330
+#define MX6_IOM_DRAM_SDQS1	0x020e0334
+#define MX6_IOM_DRAM_SDQS2	0x020e0338
+#define MX6_IOM_DRAM_SDQS3	0x020e033c
+
+#define MX6_IOM_GRP_ADDDS	0x020e05f4
+#define MX6_IOM_DDRMODE_CTL	0x020e05f8
+#define MX6_IOM_GRP_DDRPKE	0x020e05fc
+#define MX6_IOM_GRP_DDRMODE	0x020e0608
+#define MX6_IOM_GRP_B0DS	0x020e060c
+#define MX6_IOM_GRP_B1DS	0x020e0610
+#define MX6_IOM_GRP_CTLDS	0x020e0614
+#define MX6_IOM_GRP_DDR_TYPE	0x020e0618
+#define MX6_IOM_GRP_B2DS	0x020e061c
+#define MX6_IOM_GRP_B3DS	0x020e0620
+
+#endif	/*__ASM_ARCH_MX6SX_DDR_H__ */