提交 0568dd06 编写于 作者: L Ladislav Michl 提交者: Tom Rini

armv7: make gpmc_cfg const

Signed-off-by: NLadislav Michl <ladis@linux-mips.org>
[trini: Adapt am33xx, duovero, omap_zoom1]
Signed-off-by: NTom Rini <trini@konsulko.com>
Signed-off-by: NTom Rini <trini@konsulko.com>
上级 b1509e3a
......@@ -21,7 +21,7 @@
#include <command.h>
#include <linux/mtd/omap_gpmc.h>
struct gpmc *gpmc_cfg;
const struct gpmc *gpmc_cfg = (struct gpmc *)GPMC_BASE;
#if defined(CONFIG_OMAP34XX)
/********************************************************
......@@ -50,8 +50,8 @@ u32 mem_ok(u32 cs)
}
#endif
void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base,
u32 size)
void enable_gpmc_cs_config(const u32 *gpmc_config, const struct gpmc_cs *cs,
u32 base, u32 size)
{
writel(0, &cs->config7);
sdelay(1000);
......@@ -75,8 +75,6 @@ void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base,
*****************************************************/
void gpmc_init(void)
{
/* putting a blanket check on GPMC based on ZeBu for now */
gpmc_cfg = (struct gpmc *)GPMC_BASE;
#if defined(CONFIG_NOR)
/* configure GPMC for NOR */
const u32 gpmc_regs[GPMC_MAX_REG] = { STNOR_GPMC_CONFIG1,
......
......@@ -25,9 +25,8 @@ void ddr_pll_config(unsigned int ddrpll_M);
void sdelay(unsigned long);
struct gpmc_cs;
void gpmc_init(void);
void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base,
void enable_gpmc_cs_config(const u32 *gpmc_config, const struct gpmc_cs *cs, u32 base,
u32 size);
void omap_nand_switch_ecc(uint32_t, uint32_t);
......
......@@ -43,8 +43,8 @@ void get_board_mem_timings(struct board_sdrc_timings *timings);
int identify_nand_chip(int *mfr, int *id);
void emif4_init(void);
void gpmc_init(void);
void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base,
u32 size);
void enable_gpmc_cs_config(const u32 *gpmc_config, const struct gpmc_cs *cs,
u32 base, u32 size);
void watchdog_init(void);
void set_muxconf_regs(void);
......
......@@ -128,7 +128,7 @@ void board_mmc_power_init(void)
#define GPMC_BASEADDR_MASK 0x3F
#define GPMC_CS_ENABLE 0x1
static void enable_gpmc_net_config(const u32 *gpmc_config, struct gpmc_cs *cs,
static void enable_gpmc_net_config(const u32 *gpmc_config, const struct gpmc_cs *cs,
u32 base, u32 size)
{
writel(0, &cs->config7);
......
......@@ -19,6 +19,7 @@
#include <ns16550.h>
#include <netdev.h>
#include <twl4030.h>
#include <linux/mtd/omap_gpmc.h>
#include <asm/io.h>
#include <asm/arch/mem.h>
#include <asm/arch/mmc_host_def.h>
......@@ -29,10 +30,10 @@
DECLARE_GLOBAL_DATA_PTR;
/* gpmc_cfg is initialized by gpmc_init and we use it here */
extern struct gpmc *gpmc_cfg;
/* GPMC definitions for Ethenet Controller LAN9211 */
/*
* gpmc_cfg is initialized by gpmc_init and we use it here.
* GPMC definitions for Ethenet Controller LAN9211
*/
static const u32 gpmc_lab_enet[] = {
ZOOM1_ENET_GPMC_CONF1,
ZOOM1_ENET_GPMC_CONF2,
......
......@@ -264,7 +264,8 @@ static int omap_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat,
{
struct nand_chip *chip = mtd_to_nand(mtd);
struct omap_nand_info *info = nand_get_controller_data(chip);
uint32_t *ptr, val = 0;
const uint32_t *ptr;
uint32_t val = 0;
int8_t i = 0, j;
switch (info->ecc_scheme) {
......
......@@ -92,6 +92,6 @@ struct gpmc {
};
/* Used for board specific gpmc initialization */
extern struct gpmc *gpmc_cfg;
extern const struct gpmc *gpmc_cfg;
#endif /* __ASM_OMAP_GPMC_H */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册