Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq

arch/arm/cpu/armv8/start.S

@@ -168,6 +168,25 @@ apply_a57_core_errata:
 	msr	S3_1_c15_c2_0, x0	/* cpuactlr_el1 */
 #endif
 
+#ifdef CONFIG_ARM_ERRATA_833471
+	mrs	x0, S3_1_c15_c2_0	/* cpuactlr_el1 */
+	/* FPSCR write flush.
+	 * Note that in some cases where a flush is unnecessary this
+	    could impact performance. */
+	orr	x0, x0, #1 << 38
+	msr	S3_1_c15_c2_0, x0	/* cpuactlr_el1 */
+#endif
+
+#ifdef CONFIG_ARM_ERRATA_829520
+	mrs	x0, S3_1_c15_c2_0	/* cpuactlr_el1 */
+	/* Disable Indirect Predictor bit will prevent this erratum
+	    from occurring
+	 * Note that in some cases where a flush is unnecessary this
+	    could impact performance. */
+	orr	x0, x0, #1 << 4
+	msr	S3_1_c15_c2_0, x0	/* cpuactlr_el1 */
+#endif
+
 #ifdef CONFIG_ARM_ERRATA_833069
 	mrs	x0, S3_1_c15_c2_0	/* cpuactlr_el1 */
 	/* Disable Enable Invalidates of BTB bit */

arch/arm/dts/fsl-ls1043a-qds.dtsi

@@ -14,6 +14,52 @@
 
 / {
 	model = "LS1043A QDS Board";
+	aliases {
+		spi0 = &qspi;
+		spi1 = &dspi0;
+	};
+};
+
+&dspi0 {
+	bus-num = <0>;
+	status = "okay";
+
+	dflash0: n25q128a {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		reg = <0>;
+		spi-max-frequency = <1000000>; /* input clock */
+	};
+
+	dflash1: sst25wf040b {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <3500000>;
+		reg = <1>;
+	};
+
+	dflash2: en25s64 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <3500000>;
+		reg = <2>;
+	};
+};
+
+&qspi {
+	bus-num = <0>;
+	status = "okay";
+
+	qflash0: s25fl128s@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spi-flash";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
 };
 
 &i2c0 {

arch/arm/include/asm/arch-fsl-layerscape/config.h

@@ -121,6 +121,12 @@
 #define CONFIG_SYS_FSL_ERRATUM_A009663
 #define CONFIG_SYS_FSL_ERRATUM_A009942
 
+/* ARM A57 CORE ERRATA */
+#define CONFIG_ARM_ERRATA_826974
+#define CONFIG_ARM_ERRATA_828024
+#define CONFIG_ARM_ERRATA_829520
+#define CONFIG_ARM_ERRATA_833471
+
 #elif defined(CONFIG_LS1043A)
 #define CONFIG_MAX_CPUS				4
 #define CONFIG_SYS_CACHELINE_SIZE		64

drivers/net/fsl-mc/mc.c

@@ -818,6 +818,7 @@ static int dprc_init(void)
 		goto err_root_open;
 	}
 
+	memset(&cfg, 0, sizeof(struct dprc_cfg));
 	cfg.options = DPRC_CFG_OPT_TOPOLOGY_CHANGES_ALLOWED |
 		      DPRC_CFG_OPT_OBJ_CREATE_ALLOWED |
 		      DPRC_CFG_OPT_ALLOC_ALLOWED;
@@ -1160,7 +1161,7 @@ int fsl_mc_ldpaa_exit(bd_t *bd)
 
 	err = dpbp_exit();
 	if (err < 0) {
-		printf("dpni_exit() failed: %d\n", err);
+		printf("dpbp_exit() failed: %d\n", err);
 		goto err;
 	}
 

include/configs/ls1021aqds.h

@@ -665,5 +665,6 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 #include <asm/fsl_secure_boot.h>
+#define CONFIG_SYS_BOOTM_LEN	(64 << 20) /* Increase max gunzip size */
 
 #endif

include/configs/ls1021atwr.h

@@ -523,5 +523,6 @@
 #endif
 
 #include <asm/fsl_secure_boot.h>
+#define CONFIG_SYS_BOOTM_LEN	(64 << 20) /* Increase max gunzip size */
 
 #endif

include/configs/ls2080a_common.h

@@ -15,9 +15,6 @@
 #define CONFIG_GICV3
 #define CONFIG_FSL_TZPC_BP147
 
-/* Errata fixes */
-#define CONFIG_ARM_ERRATA_828024
-#define CONFIG_ARM_ERRATA_826974
 
 #include <asm/arch/ls2080a_stream_id.h>
 #include <asm/arch/config.h>

include/configs/ls2080aqds.h

@@ -346,7 +346,7 @@ unsigned long get_board_ddr_clk(void);
 	"initrd_high=0xffffffffffffffff\0"	\
 	"kernel_start=0x581100000\0"		\
 	"kernel_load=0xa0000000\0"		\
-	"kernel_size=0x28000000\0"
+	"kernel_size=0x2800000\0"
 
 #ifdef CONFIG_FSL_MC_ENET
 #define CONFIG_FSL_MEMAC