- 01 2月, 2010 8 次提交
-
-
由 Richard Kennedy 提交于
Re-order structure ttm_ref_object to remove 8 bytes of alignment padding on 64 bit builds, so shrinking its size from 72 to 64 bytes allowing it to fit into a smaller slab. Signed-off-by: NRichard Kennedy <richard@rsk.demon.co.uk> Acked-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
if we get an error, release the AGP if we've acquired it already. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 John Kacur 提交于
First call drm_agp_acquire to check if agp has been acquired. Second call drm_agp_info to fill in the info data struct, including aper_size. Finally do the check to see if the aper_size makes sense. Signed-off-by: NJohn Kacur <jkacur@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 John Kacur 提交于
- Fix warning by using %zu instead of %d for size_t - Fix spelling mistake, "to" should be "too". Signed-off-by: NJohn Kacur <jkacur@redhat.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Francisco Jerez 提交于
Fixes errors like: > reserve_ram_pages_type failed 0x15b7a000-0x15b7b000, track 0x8, req 0x10 when a BO is moved between WC and UC areas. Reported-by: NXavier Chantry <shiningxc@gmail.com> Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Acked-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
booting a Lenovo W500 with LVDS + DP outputs showed up a TODO we had on our list, to pick a correct digital encoder block. The LVTMA encoder requires the second digital encoder, all others can use any encoder at all. This fixes the digital encoder selection logic to enable LVDS/DP combos to work okay. V2: fix silly addition of connector dig_block and cleanup the other places in the code that pick the encoder. V3: rename to dig_encoder and clean up further - also fix the picking algorithm. tested on Lenovo W500 + desktop 3650 cards. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
On the W500 we have UNIPHY routed to both DVI and DP, this seems to always pick the DVI connector which means link training fails. Switch to using active device to pick the connector, this seems like it should be safe from a code review, and it fixes things a bit more here. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
This makes displayport work again here. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 25 1月, 2010 13 次提交
-
-
由 Dave Airlie 提交于
This just adds a little more info to the warning for old -ati/mesa userspaces. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
These printks aren't required anymore. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Zhenyu Wang 提交于
commit 731b5a15 Author: James Simmons <jsimmons@infradead.org> Date: Thu Oct 29 20:39:07 2009 +0000 drm/kms: properly handle fbdev blanking uses DRM_MODE_DPMS_ON for FB_BLANK_NORMAL, but DRM_MODE_DPMS_ON is actually for turning output on instead of blank. This makes fb blank broken on my T61, it put LVDS on but leave pipe disabled which made screen totally white or caused some 'burning' effect. [airlied: James objects to this but at this point in 2.6.33, I can't see a patch that will fix this properly like he wants coming in time and otherwise this is a regression - proper fix for 2.6.34 hopefully.] Cc: James Simmons <jsimmons@infradead.org> Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
This is the least invasive fix without migrating the radeon driver to pm_ops from what I can see. We just always migrate VRAM objects on IGPs for now and we can fix it up later to migrate depending on STR vs STD. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thomas Hellstrom 提交于
Use VRAM whenever there is free space for DMA buffers, but use system GMR memory if using VRAM would cause an eviction. This significantly reduces the guest system memory usage for VMs with a large amount of VRAM allocated. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Thomas Hellstrom 提交于
This is needed to fix a vmwgfx memory usage bug. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
* korg/drm-radeon-next: drm/radeon/kms: fix legacy get_engine/memory clock drm/radeon/kms/atom: atom parser fixes drm/radeon/kms: clean up atombios pll code drm/radeon/kms: clean up pll struct drm/radeon/kms/atom: fix crtc lock ordering drm/radeon: r6xx/r7xx possible security issue, system ram access drm/radeon/kms: r600/r700 don't test ib if ib initialization fails drm/radeon/kms: Forbid creation of framebuffer with no valid GEM object drm/radeon/kms: r600 handle irq vector ring overflow drm/radeon/kms: r600/r700 don't process IRQ if not initialized drm/radeon/kms: r600/r700 disable irq at suspend drm/radeon/kms/r4xx: cleanup atom path drm/radeon/kms: fix atombios_crtc_set_base drm/radeon/kms/atom: upstream parser updates drm/radeon/kms/atom: fix some parser bugs drm/radeon/kms: fix hardcoded mmio size in register functions drm/radeon/kms/r100: fix bug in CS parser drm/radeon/kms/r200: fix bug in CS parser drm/radeon/kms/r200: fix bug in CS parser
-
由 Dave Airlie 提交于
* 'nouveau/for-airlied' of ../drm-nouveau-next: drm/nv50: prevent switching off SOR when in use for DVI-over-DP drm/nv50: fail auxch transaction if reply count not what we expect drm/nouveau: fix failure path if userspace specifies no valid memtypes drm/nouveau: report LVDS as disconnected if lid closed drm/nv50: prevent accidently turning off encoders we're actually using drm/nv50: fix alignment of per-channel fifo cache drm/nouveau: Evict buffers in VRAM before freeing sgdma drm/nouveau: Acknowledge DMA_VTX_PROTECTION PGRAPH interrupts drm/nouveau: fix thinko in nv04_instmem.c drm/nouveau: fix a race condition in nouveau_dma_wait()
-
由 Luca Barbieri 提交于
Resending this with Thomas Hellstrom's signoff for merging into 2.6.33 ttm_bo_delayed_delete has a race condition, because after we do: kref_put(&nentry->list_kref, ttm_bo_release_list); we are not holding the list lock and not holding any reference to objects, and thus every bo in the list can be removed and freed at this point. However, we then use the next pointer we stored, which is not guaranteed to be valid. This was apparently the cause of some Nouveau oopses I experienced. This patch rewrites the function so that it keeps the reference to nentry until nentry itself is freed and we already got a reference to nentry->next. v2 updated by me according to Thomas Hellstrom's feedback. v3 proposed by Thomas Hellstrom. Commit comment updated by me. Both updates fixed minor efficiency/style issues only and all three versions should be correct. Signed-off-by: NLuca Barbieri <luca@luca-barbieri.com> Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Ben Skeggs 提交于
Another hack because of us exposing each encoder block's function as an encoder rather than exposing a single encoder that deals with them all. A proper fix will come, it's just rather invasive so this hack will do until then. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
We need to add the buffer to the list even if we fail, otherwise the validate_fini() call won't unreserve + unreference the GEM object, making TTM very unhappy. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Also adds a module option to ignore the status reported via ACPI, in case we hit systems with broken ACPI. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 24 1月, 2010 5 次提交
-
-
由 Alex Deucher 提交于
Fix a bad shift in the post div. Should fix fdo bug 26145 Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Only reset the reg block on the initial execute table call; nested calls require the reg block not be reset on each call. Also reset the fb window and io mode. This matches the upstream parser behavior. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
- split pll adjust into a separate function - use a union for SetPixelClock params Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
- add a new flag for fixed post div - pull the pll flags into the struct Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
This makes crtc_prepare and crtc_commit match. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 21 1月, 2010 14 次提交
-
-
由 Jerome Glisse 提交于
This patch workaround a possible security issue which can allow user to abuse drm on r6xx/r7xx hw to access any system ram memory. This patch doesn't break userspace, it detect "valid" old use of CB_COLOR[0-7]_FRAG & CB_COLOR[0-7]_TILE registers and overwritte the address these registers are pointing to with the one of the last color buffer. This workaround will work for old mesa & xf86-video-ati and any old user which did use similar register programming pattern as those (we expect that there is no others user of those ioctl except possibly a malicious one). This patch add a warning if it detects such usage, warning encourage people to update their mesa & xf86-video-ati. New userspace will submit proper relocation. Fix for xf86-video-ati / mesa (this kernel patch is enough to prevent abuse, fix for userspace are to set proper cs stream and avoid kernel warning) : http://cgit.freedesktop.org/xorg/driver/xf86-video-ati/commit/?id=95d63e408cc88b6934bec84a0b1ef94dfe8bee7b http://cgit.freedesktop.org/mesa/mesa/commit/?id=46dc6fd3ed5ef96cda53641a97bc68c3bc104a9f Abusing this register to perform system ram memory is not easy, here is outline on how it could be achieve. First attacker must have access to the drm device and be able to submit command stream throught cs ioctl. Then attacker must build a proper command stream for r6xx/r7xx hw which will abuse the FRAG or TILE buffer to overwrite the GPU GART which is in VRAM. To achieve so attacker as to setup CB_COLOR[0-7]_FRAG or CB_COLOR[0-7]_TILE to point to the GPU GART, then it has to find a way to write predictable value into those buffer (with little cleverness i believe this can be done but this is an hard task). Once attacker have such program it can overwritte GPU GART to program GPU gart to point anywhere in system memory. It then can reusse same method as he used to reprogram GART to overwritte the system ram through the GART mapping. In the process the attacker has to be carefull to not overwritte any sensitive area of the GART table, like ring or IB gart entry as it will more then likely lead to GPU lockup. Bottom line is that i think it's very hard to use this flaw to get system ram access but in theory one can achieve so. Side note: I am not aware of anyone ever using the GPU as an attack vector, nevertheless we take great care in the opensource driver to try to detect and forbid malicious use of GPU. I don't think the closed source driver are as cautious as we are. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Jerome Glisse 提交于
If ib initialization failed don't try to test ib as it will result in an oops (accessing NULL ib buffer ptr). Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Jerome Glisse 提交于
This will avoid oops if at later point the fb is use. Trying to create a framebuffer with no valid GEM object is bogus and should be forbidden as this patch does. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Jerome Glisse 提交于
In some rare case i faced an irq overflow quickly followed by a GPU lockup (hard hang) this patch try to deal with irq vector ring overflow, so far haven't been able to reproduce it with the patch. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Reviewed-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Jerome Glisse 提交于
In some rare case the wptr returned from the hw wasn't 0 and leaded to trick r600_process_irq that their were irq to process. Add a check to bail out if irq hasn't been initialized this will avoid oops provoqued by the rare wptr != 0 on initialization. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Reviewed-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Jerome Glisse 提交于
To avoid hw doing anythings after we disabled PCIE GART, fully disable IRQ at suspend. Also cleanup a bit the ih structure and process function. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Reviewed-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Alex Deucher 提交于
most of radeon_legacy_atom_set_surface() is taken care of in atombios_set_base(), so remove the duplicate setup and move the remaining bits (DISP_MERGE setup and FP2 sync) to atombios_crtc.c where they are used. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Alex Deucher 提交于
Make it call the proper backend depending on the GPU family. Right now r4xx cards with atombios modesetting enabled were using the avivo crtc base code. This also allows us to add support for new asics more easily. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Alex Deucher 提交于
- add support for inline src params - fix shift_left/shift_right and shl/shr ops shift_* ops use inline src params, shl/r use full params - fix mask op (uses inline params) Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Alex Deucher 提交于
newer asics have large mmio apertures Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Alex Deucher 提交于
The first dword of PACKET3_3D_DRAW_IMMD maps to SE_VTX_FMT so the vertex size is part of the draw packet. This patch fixes a possible case where you have a command buffer that does not contain SE_VTX_FMT register write, but does contain PACKET3_3D_DRAW_IMMD. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Andrew Randrianasulu 提交于
Add missing vertex shader regs for r200. fixed fdo bug 26061 agd5f: use official reg names Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-
由 Andrew Randrianasulu 提交于
The checks for CUBE and 3D textures were inverted. fixes fdo bug 24159 agd5f: added comments for clarity. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@linux.ie>
-