- 17 7月, 2008 40 次提交
-
-
由 Bjorn Helgaas 提交于
pnp_assign_resources() is static and the only caller checks pnp_can_configure() before calling it, so no need to do it again. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com> Acked-by: NRene Herman <rene.herman@gmail.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bjorn Helgaas 提交于
This patch doesn't change any behavior; it just makes the return values more conventional. This changes pnp_assign_dma() from a void function to one that returns an int, just like the other assignment functions. For now, at least, pnp_assign_dma() always returns 0 (success), so it appears to never fail, just like before. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com> Acked-by: NRene Herman <rene.herman@gmail.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bjorn Helgaas 提交于
If the resource list is empty, say that explicitly. Previously, it was confusing because often the heading was followed by zero resource lines, then some "add resource" lines from auto-assignment, so the "add" lines looked like current resources. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com> Acked-by: NRene Herman <rene.herman@gmail.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bjorn Helgaas 提交于
When we fail to assign an I/O or MEM resource, include the min/max in the debug output to help match it with the options. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com> Acked-by: NRene Herman <rene.herman@gmail.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bjorn Helgaas 提交于
ACPI Address Space Descriptors can be up to 64 bits wide. We should keep track of the whole thing when parsing resource options, so this patch changes PNP port and mem option fields from "unsigned short" and "unsigned int" to "resource_size_t". Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com> Acked-by: NRene Herman <rene.herman@gmail.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bjorn Helgaas 提交于
This adds a typedef for the IRQ bitmap, which should cause no functional change, but will make it easier to pass a pointer to a bitmap to pnp_register_irq_resource(). Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com> Acked-by: NRene Herman <rene.herman@gmail.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bjorn Helgaas 提交于
Nothing outside the PNP subsystem should need access to a device's resource options, so this patch moves the option structure declarations to a private header file. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com> Acked-by: NRene Herman <rene.herman@gmail.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bjorn Helgaas 提交于
PNP previously defined PNP_PORT_FLAG_16BITADDR and PNP_PORT_FLAG_FIXED in a private header file, but put those flags in struct resource.flags fields. Better to make them IORESOURCE_IO_* flags like the existing IRQ, DMA, and MEM flags. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com> Acked-by: NRene Herman <rene.herman@gmail.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bjorn Helgaas 提交于
No functional change; just make a couple declarations consistent with the rest of the file. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com> Acked-by: NRene Herman <rene.herman@gmail.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bjorn Helgaas 提交于
As part of a heuristic to identify modem devices, 8250_pnp.c checks to see whether a device can be configured at any of the legacy COM port addresses. This patch moves the code that traverses the PNP "possible resource options" from 8250_pnp.c to the PNP subsystem. This encapsulation is important because a future patch will change the implementation of those resource options. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com> Acked-by: NRene Herman <rene.herman@gmail.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Bjorn Helgaas 提交于
Rather than stepping through all IO resources, then stepping through all MMIO resources, etc., we can just iterate over the resource list once directly. This can change the order in /sys, e.g., # cat /sys/devices/pnp0/00:07/resources # OLD state = active io 0x3f8-0x3ff irq 4 # cat /sys/devices/pnp0/00:07/resources # NEW state = active irq 4 io 0x3f8-0x3ff The old code artificially sorted resources by type; the new code just lists them in the order we read them from the ISAPNP hardware or the BIOS. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Bjorn Helgaas 提交于
We used to have a fixed-size resource table. If a device had twenty resources when the table only had space for ten, we didn't need ten warnings, so we added the ratelimit. Now that we can dynamically allocate new resources, we should only get failures if the allocation fails. That should be rare enough that we don't need to ratelimit the messages. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Bjorn Helgaas 提交于
When we parse a device's _CRS data (the current resource settings), we should keep track of everything we find, even if it's currently disabled or invalid. This is what we already do for ISAPNP and PNPBIOS, and it helps keep things matched up when we subsequently re-encode resources. For example, consider a device with (mem, irq0, irq1, io), where irq0 is disabled. If we drop irq0 when parsing the _CRS, we will mistakenly put irq1 in the irq0 slot when we encode resources for an _SRS call. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Bjorn Helgaas 提交于
PNP used to have a fixed-size pnp_resource_table for tracking the resources used by a device. This table often overflowed, so we've had to increase the table size, which wastes memory because most devices have very few resources. This patch replaces the table with a linked list of resources where the entries are allocated on demand. This removes messages like these: pnpacpi: exceeded the max number of IO resources 00:01: too many I/O port resources References: http://bugzilla.kernel.org/show_bug.cgi?id=9535 http://bugzilla.kernel.org/show_bug.cgi?id=9740 http://lkml.org/lkml/2007/11/30/110 This patch also changes the way PNP uses the IORESOURCE_UNSET, IORESOURCE_AUTO, and IORESOURCE_DISABLED flags. Prior to this patch, the pnp_resource_table entries used the flags like this: IORESOURCE_UNSET This table entry is unused and available for use. When this flag is set, we shouldn't look at anything else in the resource structure. This flag is set when a resource table entry is initialized. IORESOURCE_AUTO This resource was assigned automatically by pnp_assign_{io,mem,etc}(). This flag is set when a resource table entry is initialized and cleared whenever we discover a resource setting by reading an ISAPNP config register, parsing a PNPBIOS resource data stream, parsing an ACPI _CRS list, or interpreting a sysfs "set" command. Resources marked IORESOURCE_AUTO are reinitialized and marked as IORESOURCE_UNSET by pnp_clean_resource_table() in these cases: - before we attempt to assign resources automatically, - if we fail to assign resources automatically, - after disabling a device IORESOURCE_DISABLED Set by pnp_assign_{io,mem,etc}() when automatic assignment fails. Also set by PNPBIOS and PNPACPI for: - invalid IRQs or GSI registration failures - invalid DMA channels - I/O ports above 0x10000 - mem ranges with negative length After this patch, there is no pnp_resource_table, and the resource list entries use the flags like this: IORESOURCE_UNSET This flag is no longer used in PNP. Instead of keeping IORESOURCE_UNSET entries in the resource list, we remove entries from the list and free them. IORESOURCE_AUTO No change in meaning: it still means the resource was assigned automatically by pnp_assign_{port,mem,etc}(), but these functions now set the bit explicitly. We still "clean" a device's resource list in the same places, but rather than reinitializing IORESOURCE_AUTO entries, we just remove them from the list. Note that IORESOURCE_AUTO entries are always at the end of the list, so removing them doesn't reorder other list entries. This is because non-IORESOURCE_AUTO entries are added by the ISAPNP, PNPBIOS, or PNPACPI "get resources" methods and by the sysfs "set" command. In each of these cases, we completely free the resource list first. IORESOURCE_DISABLED In addition to the cases where we used to set this flag, ISAPNP now adds an IORESOURCE_DISABLED resource when it reads a configuration register with a "disabled" value. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Bjorn Helgaas 提交于
Some callers use pnp_port_start() and similar functions without making sure the resource is valid. This patch makes us fall back to returning the initial values if the resource is not valid or not even present. This mostly preserves the previous behavior, where we would just return the initial values set by pnp_init_resource_table(). The original 2.6.25 code didn't range-check the "bar", so it would return garbage if the bar exceeded the table size. This code returns sensible values instead. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Bjorn Helgaas 提交于
This patch adds a "pnp_resource_type_name(struct resource *)" that returns the string resource type. This will be used by the sysfs "show resources" function and the debug resource dump function. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Bjorn Helgaas 提交于
Given a struct resource, this returns the type (IO, MEM, IRQ, DMA). Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Bjorn Helgaas 提交于
We used pnp_resource.index to keep track of which ISAPNP configuration register a resource should be written to. We needed this only to handle the case where a register is disabled but a subsequent register in the same set is enabled. Rather than explicitly maintaining the pnp_resource.index, this patch adds a resource every time we read an ISAPNP configuration register and marks the resource as IORESOURCE_DISABLED when appropriate. This makes the position in the pnp_resource_table always correspond to the config register index. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Bjorn Helgaas 提交于
In the debug resource dump, decode the flags and indicate when a resource is disabled or has been automatically assigned. Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NLen Brown <len.brown@intel.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Julia Jomantaite 提交于
Fix use of uninitialized device->brightness. Signed-off-by: NJulia Jomantaite <julia.jomantaite@gmail.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com> Acked-by: NZhang Rui <rui.zhang@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Len Brown 提交于
...while Len is on sabbatical from Intel Signed-off-by: NLen Brown <len.brown@intel.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Len Brown 提交于
Reflect that Zhang-Rui has been the sub-maintainer for ACPI THERMAL and FAN for some time now. Also, the Chinese custom is to speak family name first, so rather than "Rui Zhang", write "Zhang Rui", as he does on e-mail. Signed-off-by: NLen Brown <len.brown@intel.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Zhao Yakui 提交于
If a system matches in this DMI table, Linux will disable MWAIT support for idle. ie. "idle=nomwait" is automatically invoked and C1_FFH and C2C3_FFH access mode are disabled. http://bugzilla.kernel.org/show_bug.cgi?id=10807 http://bugzilla.kernel.org/show_bug.cgi?id=10914Signed-off-by: NZhao Yakui <yakui.zhao@intel.com> Signed-off-by: NLi Shaohua <shaohua.li@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Zhao Yakui 提交于
"idle=nomwait" disables the use of the MWAIT instruction from both C1 (C1_FFH) and deeper (C2C3_FFH) C-states. When MWAIT is unavailable, the BIOS and OS generally negotiate to use the HALT instruction for C1, and use IO accesses for deeper C-states. This option is useful for power and performance comparisons, and also to work around BIOS bugs where broken MWAIT support is advertised. http://bugzilla.kernel.org/show_bug.cgi?id=10807 http://bugzilla.kernel.org/show_bug.cgi?id=10914Signed-off-by: NZhao Yakui <yakui.zhao@intel.com> Signed-off-by: NLi Shaohua <shaohua.li@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Zhao Yakui 提交于
"idle=halt" limits the idle loop to using the halt instruction. No MWAIT, no IO accesses, no C-states deeper than C1. If something is broken in the idle code, "idle=halt" is a less severe workaround than "idle=poll" which disables all power savings. Signed-off-by: NZhao Yakui <yakui.zhao@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Zhao Yakui 提交于
991528d7 (ACPI: Processor native C-states using MWAIT) started passing C2C3_FFH to _PDC to tell the BIOS that Linux supports MWAIT for deep C-states. However, we should first double check with the hardware that it actually supports MWAIT before potentially exposing a BIOS bug of an MWAIT _CST on HW that doesn't support MWAIT. Signed-off-by: NZhao Yakui <yakui.zhao@intel.com> Signed-off-by: NLi Shaohua <shaohua.li@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Zhang Rui 提交于
Allow users to enable/disable/clear a specific & valid GPE/Fixed Event in user space. This is useful for debugging, especially for some interrupt storm issues. All wakeup GPEs are disabled and they can not be enabled at runtime, and we mark them as invalid. All GPEs that don't have a _Lxx/_Exx method are marked as invalid. All Fixed Events that don't have an event handler are marked as invalid and they can't be enabled until an event handler is registered. Signed-off-by: NZhang Rui <rui.zhang@intel.com> Signed-off-by: NLing Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Bob Moore 提交于
Update version to 20080609. Signed-off-by: NLen Brown <len.brown@intel.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Bob Moore 提交于
Loop was terminating one iteration early, missing one of the debugger handshake mutexes. Linn Crosetto. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Bob Moore 提交于
Removed extraneous else clauses, other general cleanup. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Bob Moore 提交于
Eliminated unnecessary operands; eliminated use of negative index in loop. Operands now displayed in correct order, not backwards. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Bob Moore 提交于
This problem was introduced in 20080514 as a result of the elimination of the acpi_native_uint type. Code uses a negative array index, which should be eliminated. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Bob Moore 提交于
Now supports the 2007 intel Virtualization Technology for Directed I/O specification. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Bob Moore 提交于
Synchronized tables with current specifications. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Bob Moore 提交于
Some BIOSs erroneously reverse the _PRT SourceName and the SourceIndex. Detect and repair this problem. MS ACPI also allows and repairs this problem, thus ACPICA must also. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Bob Moore 提交于
Update version to 20080514 Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Bob Moore 提交于
Mostly MODULE_NAME and printf format strings. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Bob Moore 提交于
Remove pointer cast warnings and fix for a debug printf. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Bob Moore 提交于
From lint. Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-
由 Bob Moore 提交于
No longer needed; replaced mostly with u32, but also acpi_size where a type that changes 32/64 bit on 32/64-bit platforms is required. v2: Fix a cast of a 32-bit int to a pointer in ACPI to avoid a compiler warning. from David Howells Signed-off-by: NBob Moore <robert.moore@intel.com> Signed-off-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NLen Brown <len.brown@intel.com> Signed-off-by: NAndi Kleen <ak@linux.intel.com>
-