- 03 2月, 2010 2 次提交
-
-
由 Trond Myklebust 提交于
Ensure that we unregister the bdi before kill_anon_super() calls ida_remove() on our device name. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org
-
由 Trond Myklebust 提交于
The VM/VFS does not allow mapping->a_ops->invalidatepage() to fail. Unfortunately, nfs_wb_page_cancel() may fail if a fatal signal occurs. Since the NFS code assumes that the page stays mapped for as long as the writeback is active, we can end up Oopsing (among other things). The only safe fix here is to convert nfs_wait_on_request(), so as to make it uninterruptible (as is already the case with wait_on_page_writeback()). Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org
-
- 27 1月, 2010 8 次提交
-
-
由 Trond Myklebust 提交于
Even if the server is crazy, we should be able to mark the stateid as being bad, to ensure it gets recovered. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
-
由 Trond Myklebust 提交于
Currently, nfs4_handle_exception() will call it twice if called with an error of -NFS4ERR_STALE_CLIENTID, -NFS4ERR_STALE_STATEID or -NFS4ERR_EXPIRED. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
-
由 Trond Myklebust 提交于
In most cases, we just want to mark the lock_stateid sequence id as being uninitialised. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
-
由 David Howells 提交于
Avoid the following warnings when CONFIG_NFS_V4=n: fs/nfs/sysctl.c:19: warning: unused variable `nfs_set_port_max' fs/nfs/sysctl.c:18: warning: unused variable `nfs_set_port_min' by making those variables contingent on NFSv4 being configured. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
-
由 H Hartley Sweeten 提交于
The symbol nfs_commitdata_release is only used locally in this file. Make it static to prevent the following sparse warning: warning: symbol 'nfs_commitdata_release' was not declared. Should it be static? Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
-
由 Trond Myklebust 提交于
If someone calls nfs_release_page(), we presumably already know that the page is clean, however it may be holding an unstable write. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
-
由 Trond Myklebust 提交于
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@kernel.org Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
-
- 22 1月, 2010 3 次提交
-
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf: x86: Add support for the ANY bit perf: Change the is_software_event() definition perf: Honour event state for aux stream data perf: Fix perf_event_do_pending() fallback callsite perf kmem: Print usage help for unknown commands perf kmem: Increase "Hit" column length hw-breakpoints, perf: Fix broken mmiotrace due to dr6 by reference change perf timechart: Use tid not pid for COMM change
-
由 Linus Torvalds 提交于
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Reassign prev and switch_count when reacquire_kernel_lock() fail sched: Fix vmark regression on big machines
-
- 21 1月, 2010 27 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev由 Linus Torvalds 提交于
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: retry FS IOs even if it has failed with AC_ERR_INVALID
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: tty: fix race in tty_fasync serial: serial_cs: oxsemi quirk breaks resume serial: imx: bit &/| confusion serial: Fix crash if the minimum rate of the device is > 9600 baud serial-core: resume serial hardware with no_console_suspend serial: 8250_pnp: use wildcard for serial Wacom tablets nozomi: quick fix for the close/close bug compat_ioctl: Supress "unknown cmd" message on serial /dev/console
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging: hv: fix smp problems in the hyperv core code Staging: et131x: Fix 2.6.33rc1 regression in et131x Staging: asus_oled: fix oops in 2.6.32.2
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: Revert "sysdev: fix prototype for memory_sysdev_class show/store functions" driver-core: fix devtmpfs crash on s390
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: isp1362: fix build failure on ARM systems via irq_flags cleanup USB: isp1362: better 64bit printf warning fixes USB: fix usbstorage for 2770:915d delivers no FAT USB: Fix level of isp1760 Reloading ptd error message USB: FHCI: avoid NULL pointer dereference USB: Fix duplicate sysfs problem after device reset. USB: add speed values for USB 3.0 and wireless controllers USB: add missing delay during remote wakeup USB: EHCI & UHCI: fix race between root-hub suspend and port resume USB: EHCI: fix handling of unusual interrupt intervals USB: Don't use GFP_KERNEL while we cannot reset a storage device USB: fix bitmask merge error usb: serial: fix memory leak in generic driver USB: serial: fix USB serial fix kfifo_len locking
-
git://git.kernel.dk/linux-2.6-block由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: fs/bio.c: fix shadows sparse warning drbd: The kernel code is now equivalent to out of tree release 8.3.7 drbd: Allow online resizing of DRBD devices while peer not reachable (needs to be explicitly forced) drbd: Don't go into StandAlone mode when authentification failes because of network error drivers/block/drbd/drbd_receiver.c: correct NULL test cfq-iosched: Respect ioprio_class when preempting genhd: overlapping variable definition block: removed unused as_io_context DM: Fix device mapper topology stacking block: bdev_stack_limits wrapper block: Fix discard alignment calculation and printing block: Correct handling of bottom device misaligment drbd: check on CONFIG_LBDAF, not LBD drivers/block/drbd: Correct NULL test drbd: Silenced an assert that could triggered after changing write ordering method drbd: Kconfig fix drbd: Fix for a race between IO and a detach operation [Bugz 262] drbd: Use drbd_crypto_is_hash() instead of an open coded check
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (23 commits) ACPI: delete acpi_processor_power_verify_c2() ACPI: allow C3 > 1000usec ACPI: enable C2 and Turbo-mode on Nehalem notebooks on A/C ACPI: power_meter: remove double kfree() ACPI: processor: restrict early _PDC to opt-in platforms ACPI: Fix unused variable warning in sbs.c acpi: make ACPI device id constant sony-laptop - fix using of uninitialized variable ACPI: Fix section mismatch error for acpi_early_processor_set_pdc() eeepc-laptop: disable wireless hotplug for 1201N eeepc-laptop: add hotplug_disable parameter eeepc-laptop: switch to using sparse keymap library eeepc-laptop: dmi blacklist to disable pci hotplug code eeepc-laptop: disable cpu speed control on EeePC 701 ACPI: don't cond_resched if irq is disabled ACPI: Remove unnecessary cast. ACPI: Advertise to BIOS in _OSC: _OST on _PPC changes ACPI: EC: Add wait for irq storm ACPI: SBS: Move SBS HC callback to faster Notify queue x86, ACPI: delete acpi_boot_table_init() return value ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6: ecryptfs: use after free ecryptfs: Eliminate useless code ecryptfs: fix interpose/interpolate typos in comments ecryptfs: pass matching flags to interpose as defined and used there ecryptfs: remove unnecessary d_drop calls in ecryptfs_link ecryptfs: don't ignore return value from lock_rename ecryptfs: initialize private persistent file before dereferencing pointer eCryptfs: Remove mmap from directory operations eCryptfs: Add getattr function eCryptfs: Use notify_change for truncating lower inodes
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: fix possible panic on unmount Btrfs: deal with NULL acl sent to btrfs_set_acl Btrfs: fix regression in orphan cleanup Btrfs: Fix race in btrfs_mark_extent_written Btrfs, fix memory leaks in error paths Btrfs: align offsets for btrfs_ordered_update_i_size btrfs: fix missing last-entry in readdir(3)
-
由 Yongseok Koh 提交于
In free_unmap_area_noflush(), va->flags is marked as VM_LAZY_FREE first, and then vmap_lazy_nr is increased atomically. But, in __purge_vmap_area_lazy(), while traversing of vmap_are_list, nr is counted by checking VM_LAZY_FREE is set to va->flags. After counting the variable nr, kernel reads vmap_lazy_nr atomically and checks a BUG_ON condition whether nr is greater than vmap_lazy_nr to prevent vmap_lazy_nr from being negative. The problem is that, if interrupted right after marking VM_LAZY_FREE, increment of vmap_lazy_nr can be delayed. Consequently, BUG_ON condition can be met because nr is counted more than vmap_lazy_nr. It is highly probable when vmalloc/vfree are called frequently. This scenario have been verified by adding delay between marking VM_LAZY_FREE and increasing vmap_lazy_nr in free_unmap_area_noflush(). Even the vmap_lazy_nr is for checking high watermark, it never be the strict watermark. Although the BUG_ON condition is to prevent vmap_lazy_nr from being negative, vmap_lazy_nr is signed variable. So, it could go down to negative value temporarily. Consequently, removing the BUG_ON condition is proper. A possible BUG_ON message is like the below. kernel BUG at mm/vmalloc.c:517! invalid opcode: 0000 [#1] SMP EIP: 0060:[<c04824a4>] EFLAGS: 00010297 CPU: 3 EIP is at __purge_vmap_area_lazy+0x144/0x150 EAX: ee8a8818 EBX: c08e77d4 ECX: e7c7ae40 EDX: c08e77ec ESI: 000081fe EDI: e7c7ae60 EBP: e7c7ae64 ESP: e7c7ae3c DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Call Trace: [<c0482ad9>] free_unmap_vmap_area_noflush+0x69/0x70 [<c0482b02>] remove_vm_area+0x22/0x70 [<c0482c15>] __vunmap+0x45/0xe0 [<c04831ec>] vmalloc+0x2c/0x30 Code: 8d 59 e0 eb 04 66 90 89 cb 89 d0 e8 87 fe ff ff 8b 43 20 89 da 8d 48 e0 8d 43 20 3b 04 24 75 e7 fe 05 a8 a5 a3 c0 e9 78 ff ff ff <0f> 0b eb fe 90 8d b4 26 00 00 00 00 56 89 c6 b8 ac a5 a3 c0 31 EIP: [<c04824a4>] __purge_vmap_area_lazy+0x144/0x150 SS:ESP 0068:e7c7ae3c [ See also http://marc.info/?l=linux-kernel&m=126335856228090&w=2 ] Signed-off-by: NYongseok Koh <yongseok.koh@samsung.com> Reviewed-by: NMinchan Kim <minchan.kim@gmail.com> Cc: Nick Piggin <npiggin@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6由 Linus Torvalds 提交于
* 'sh/for-2.6.33' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh64: wire up sys_accept4. sh: unwire sys_recvmmsg. sh: ms7724: Correct sh-eth EEPROM polling timeout.
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 5888/1: arm: Update comments in cacheflush.h and remove unnecessary V6 and V7 comments ARM: 5886/1: arm: Fix cpu_proc_fin() for proc-v7.S and make kexec work ARM: 5885/1: arm: Flush TLB entries in setup_mm_for_reboot() ARM: 5884/1: arm: Fix DCC console for v7 ARM: 5883/1: Revert "disable NX support for OABI-supporting kernels" ARM: 5882/1: ARM: Fix uncompress code compile for different defines of flush(void) ARM: fix badly placed mach/plat entries in Kconfig & Makefile
-
由 Stephane Eranian 提交于
Propagate the ANY bit into the fixed counter config for v3 and higher. Signed-off-by: NStephane Eranian <eranian@google.com> [a.p.zijlstra@chello.nl: split from larger patch] Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <4b5430c6.0f975e0a.1bf9.ffff85fe@mx.google.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
The is_software_event() definition always confuses me because its an exclusive expression, make it an inclusive one. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Anton reported that perf record kept receiving events even after calling ioctl(PERF_EVENT_IOC_DISABLE). It turns out that FORK,COMM and MMAP events didn't respect the disabled state and kept flowing in. Reported-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Tested-by: NAnton Blanchard <anton@samba.org> LKML-Reference: <1263459187.4244.265.camel@laptop> CC: stable@kernel.org Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Paul questioned the context in which we should call perf_event_do_pending(). After looking at that I found that it should be called from IRQ context these days, however the fallback call-site is placed in softirq context. Ammend this by placing the callback in the IRQ timer path. Reported-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1263374859.4244.192.camel@laptop> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Yong Zhang 提交于
Assume A->B schedule is processing, if B have acquired BKL before and it need reschedule this time. Then on B's context, it will go to need_resched_nonpreemptible for reschedule. But at this time, prev and switch_count are related to A. It's wrong and will lead to incorrect scheduler statistics. Signed-off-by: NYong Zhang <yong.zhang0@gmail.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <2674af741001102238w7b0ddcadref00d345e2181d11@mail.gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Mike Galbraith 提交于
SD_PREFER_SIBLING is set at the CPU domain level if power saving isn't enabled, leading to many cache misses on large machines as we traverse looking for an idle shared cache to wake to. Change the enabler of select_idle_sibling() to SD_SHARE_PKG_RESOURCES, and enable same at the sibling domain level. Reported-by: NLin Ming <ming.m.lin@intel.com> Signed-off-by: NMike Galbraith <efault@gmx.de> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1262612696.15495.15.camel@marge.simson.net> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Lothar Wassmann 提交于
There was some left over #ifdef ARM logic that is outdated but no one really noticed. So instead of relying on this tricky logic, properly load and utilize the platform irq_flags resources. Reported-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NLothar Wassmann <LW@KARO-electronics.de> Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Lothar Wassmann 提交于
Some hosts that treat the return value of sizeof differently from unsigned long might still hit warnings. So use %zu for sizeof() values. This is a better version of the previous commit b0a9cf29. Signed-off-by: NLothar Wassmann <LW@KARO-electronics.de> Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Ryan May 提交于
Resolves kernel.org bug 14914. Remove entry for 2770:915d (usb digital camera with mass storage support) from unusual_devs.h. The fix triggered by the entry causes the file system on the camera to be completely inaccessible (no partition table, the device is not mountable). The patch works, but let me clarify a few things about it. All the patch does is remove the entry for this device from the drivers/usb/storage/unusual_devs.h, which is supposed to help with a problem with the device's reported size (I think). I'm pretty sure it was originally added for a reason, so I'm not sure removing it won't cause other problems to reappear. Also, I should note that this unusual_devs.h entry was present (and activating workarounds) in 2.6.29, but in that version everything works fine. Starting with 2.6.30, things no longer work. Signed-off-by: NRyan May <rmay31@gmail.com> Cc: Rohan Hart <rohan.hart17@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Colin Tuckley 提交于
This error message is not actually an error, it's an information message. It is triggered when a transfer which ended in a NAQ is retried successfully by the hardware. Signed-off-by: NColin Tuckley <colin.tuckley@arm.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alexander Beregalov 提交于
Assign fhci only if usb is not NULL. Signed-off-by: NAlexander Beregalov <a.beregalov@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Sarah Sharp 提交于
Borislav Petkov reports issues with duplicate sysfs endpoint files after a resume from a hibernate. It turns out that the code to support alternate settings under xHCI has issues when a device with a non-default alternate setting is reset during the hibernate: [ 427.681810] Restarting tasks ... [ 427.681995] hub 1-0:1.0: state 7 ports 6 chg 0004 evt 0000 [ 427.682019] usb usb3: usb resume [ 427.682030] ohci_hcd 0000:00:12.0: wakeup root hub [ 427.682191] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s [ 427.682205] usb 1-2: usb wakeup-resume [ 427.682226] usb 1-2: finish reset-resume [ 427.682886] done. [ 427.734658] ehci_hcd 0000:00:12.2: port 2 high speed [ 427.734663] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT [ 427.746682] hub 3-0:1.0: hub_reset_resume [ 427.746693] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 427.786715] usb 1-2: reset high speed USB device using ehci_hcd and address 2 [ 427.839653] ehci_hcd 0000:00:12.2: port 2 high speed [ 427.839666] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT [ 427.847717] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [1] = 0x00010100 CSC PPS [ 427.915497] hub 1-2:1.0: remove_intf_ep_devs: if: ffff88022f9e8800 ->ep_devs_created: 1 [ 427.915774] hub 1-2:1.0: remove_intf_ep_devs: bNumEndpoints: 1 [ 427.915934] hub 1-2:1.0: if: ffff88022f9e8800: endpoint devs removed. [ 427.916158] hub 1-2:1.0: create_intf_ep_devs: if: ffff88022f9e8800 ->ep_devs_created: 0, ->unregistering: 0 [ 427.916434] hub 1-2:1.0: create_intf_ep_devs: bNumEndpoints: 1 [ 427.916609] ep_81: create, parent hub [ 427.916632] ------------[ cut here ]------------ [ 427.916644] WARNING: at fs/sysfs/dir.c:477 sysfs_add_one+0x82/0x96() [ 427.916649] Hardware name: System Product Name [ 427.916653] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2:1.0/ep_81' [ 427.916658] Modules linked in: binfmt_misc kvm_amd kvm powernow_k8 cpufreq_ondemand cpufreq_powersave cpufreq_userspace freq_table cpufreq_conservative ipv6 vfat fat +8250_pnp 8250 pcspkr ohci_hcd serial_core k10temp edac_core [ 427.916694] Pid: 278, comm: khubd Not tainted 2.6.33-rc2-00187-g08d869aa-dirty #13 [ 427.916699] Call Trace: The problem is caused by a mismatch between the USB core's view of the device state and the USB device and xHCI host's view of the device state. After the device reset and re-configuration, the device and the xHCI host think they are using alternate setting 0 of all interfaces. However, the USB core keeps track of the old state, which may include non-zero alternate settings. It uses intf->cur_altsetting to keep the endpoint sysfs files for the old state across the reset. The bandwidth allocation functions need to know what the xHCI host thinks the current alternate settings are, so original patch set intf->cur_altsetting to the alternate setting 0. This caused duplicate endpoint files to be created. The solution is to not set intf->cur_altsetting before calling usb_set_interface() in usb_reset_and_verify_device(). Instead, we add a new flag to struct usb_interface to tell usb_hcd_alloc_bandwidth() to use alternate setting 0 as the currently installed alternate setting. Signed-off-by: NSarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: NBorislav Petkov <petkovbb@googlemail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Greg Kroah-Hartman 提交于
These controllers say "unknown" for their speed in sysfs, which obviously isn't correct. Reported-by: NKurt Garloff <garloff@novell.com> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: David Vrabel <david.vrabel@csr.com> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as1330) fixes a bug in khbud's handling of remote wakeups. When a device sends a remote-wakeup request, the parent hub (or the host controller driver, for directly attached devices) begins the resume sequence and notifies khubd when the sequence finishes. At this point the port's SUSPEND feature is automatically turned off. However the device needs an additional 10-ms resume-recovery time (TRSMRCY in the USB spec). Khubd does not wait for this delay if the SUSPEND feature is off, and as a result some devices fail to behave properly following a remote wakeup. This patch adds the missing delay to the remote-wakeup path. It also extends the resume-signalling delay used by ehci-hcd and uhci-hcd from 20 ms (the value in the spec) to 25 ms (the value we use for non-remote-wakeup resumes). The extra time appears to help some devices. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Cc: Rickard Bellini <rickard.bellini@ericsson.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as1321) fixes a problem with EHCI and UHCI root-hub suspends: If the suspend occurs while a port is trying to resume, the resume doesn't finish and simply gets lost. When remote wakeup is enabled, this is undesirable behavior. The patch checks first to see if any port resumes are in progress, and if they are then it fails the root-hub suspend with -EBUSY. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-