Finally we can use early_res to replace bootmem for x86_64 now.

Still can use CONFIG_NO_BOOTMEM to enable it or not.

-v2: fix 32bit compiling about MAX_DMA32_PFN
-v3: folded bug fix from LKML message below
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <4B747239.4070907@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

64bit NUMA already make enough space under 4G with new early_node_mem.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <1265793639-15071-16-git-send-email-yinghai@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

So we could put pgdata for the node high, and later sparse
vmmap will get the section nr that need.

With this patch will make <4 GB ram not use a sparse vmmap.

before this patch, will get, before swiotlb try get bootmem
[    0.000000] nid=1 start=0 end=2080000 aligned=1
[    0.000000]   free [10 - 96]
[    0.000000]   free [b12 - 1000]
[    0.000000]   free [359f - 38a3]
[    0.000000]   free [38b5 - 3a00]
[    0.000000]   free [41e01 - 42000]
[    0.000000]   free [73dde - 73e00]
[    0.000000]   free [73fdd - 74000]
[    0.000000]   free [741dd - 74200]
[    0.000000]   free [743dd - 74400]
[    0.000000]   free [745dd - 74600]
[    0.000000]   free [747dd - 74800]
[    0.000000]   free [749dd - 74a00]
[    0.000000]   free [74bdd - 74c00]
[    0.000000]   free [74ddd - 74e00]
[    0.000000]   free [74fdd - 75000]
[    0.000000]   free [751dd - 75200]
[    0.000000]   free [753dd - 75400]
[    0.000000]   free [755dd - 75600]
[    0.000000]   free [757dd - 75800]
[    0.000000]   free [759dd - 75a00]
[    0.000000]   free [75bdd - 7bf5f]
[    0.000000]   free [7f730 - 7f750]
[    0.000000]   free [100000 - 2080000]
[    0.000000]   total free 1f87170
[   93.301474] Placing 64MB software IO TLB between ffff880075bdd000 - ffff880079bdd000
[   93.311814] software IO TLB at phys 0x75bdd000 - 0x79bdd000

with this patch will get: before swiotlb try get bootmem
[    0.000000] nid=1 start=0 end=2080000 aligned=1
[    0.000000]   free [a - 96]
[    0.000000]   free [702 - 1000]
[    0.000000]   free [359f - 3600]
[    0.000000]   free [37de - 3800]
[    0.000000]   free [39dd - 3a00]
[    0.000000]   free [3bdd - 3c00]
[    0.000000]   free [3ddd - 3e00]
[    0.000000]   free [3fdd - 4000]
[    0.000000]   free [41dd - 4200]
[    0.000000]   free [43dd - 4400]
[    0.000000]   free [45dd - 4600]
[    0.000000]   free [47dd - 4800]
[    0.000000]   free [49dd - 4a00]
[    0.000000]   free [4bdd - 4c00]
[    0.000000]   free [4ddd - 4e00]
[    0.000000]   free [4fdd - 5000]
[    0.000000]   free [51dd - 5200]
[    0.000000]   free [53dd - 5400]
[    0.000000]   free [55dd - 7bf5f]
[    0.000000]   free [7f730 - 7f750]
[    0.000000]   free [100428 - 100600]
[    0.000000]   free [13ea01 - 13ec00]
[    0.000000]   free [170800 - 2080000]
[    0.000000]   total free 1f87170

[   92.689485] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[   92.699799] Placing 64MB software IO TLB between ffff8800055dd000 - ffff8800095dd000
[   92.710916] software IO TLB at phys 0x55dd000 - 0x95dd000

so will get enough space below 4G, aka pfn 0x100000
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <1265793639-15071-15-git-send-email-yinghai@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Use early_res_count to track the num, and use find_e820 to get a new
buffer, then copy from the old to the new one.

Also, clear early_res to prevent later invalid usage.

-v2 _check_and_double_early_res should take new start
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <1265793639-15071-14-git-send-email-yinghai@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

To prepare allocate early res array from fine_e820_area.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <1265793639-15071-13-git-send-email-yinghai@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Simplify setup_node_mem: don't use bootmem from other node, instead
just find_e820_area in early_node_mem.

This keeps the boundary between early_res and boot mem more clear, and
lets us only call early_res_to_bootmem() one time instead of for all
nodes.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <1265793639-15071-12-git-send-email-yinghai@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

So we can check that early in the bootlog.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <1265793639-15071-11-git-send-email-yinghai@kernel.org>
Reviewed-by: NChristoph Lameter <cl@linux-foundation.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

So make interface more consistent with early_res.
Later we can share some code with early_res.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <1265793639-15071-10-git-send-email-yinghai@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Should be good for 32bit too.

-v3: cast res->start
-v4: according to Linus, to use %pR instead of cast
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <1265793639-15071-9-git-send-email-yinghai@kernel.org>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Prepare for 32bit pci root bus

-v2: hpa said we should compare with (resource_size_t)~0
-v3: according to Linus to use MAX_RESOURCE instead.
     also need need to put related patches together
-v4: according to Andrew, use min in cap_resource()
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <1265793639-15071-8-git-send-email-yinghai@kernel.org>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Prepare to enable it for 32bit.

-v2: remove not needed cast
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <1265793639-15071-7-git-send-email-yinghai@kernel.org>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Found MSI amd k8 based laptops is hiding [0x70000000, 0x80000000) RAM
from e820.

enable amd one chain even for all.

-v2: use bool for found, according to Andrew
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <1265793639-15071-6-git-send-email-yinghai@kernel.org>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Prepare to enable 32bit intel and amd bus.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <1265793639-15071-5-git-send-email-yinghai@kernel.org>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

We have almost the same code for mtrr cleanup and amd_bus checkup, and
this code  will also be used in replacing bootmem with early_res,
so try to move them together and reuse it from different parts.

Also rename update_range to subtract_range as that is what the
function is actually doing.

-v2: update comments as Christoph requested
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
LKML-Reference: <1265793639-15071-4-git-send-email-yinghai@kernel.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Rename add_range() to add_bus_range() to avoid conflict with the
naming of the generic range manipulation functions.

LKML-Reference: <1265793639-15071-4-git-send-email-yinghai@kernel.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c-tiny-usb: Fix on big-endian systems

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] Fix struct _lowcore layout.
  [S390] qdio: prevent call trace if CHPID is offline
  [S390] qdio: continue polling for buffer state ERROR

* 'kvm-updates/2.6.33' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: PIT: control word is write-only
  kvmclock: count total_sleep_time when updating guest clock
  Export the symbol of getboottime and mmonotonic_to_bootbased

* git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:
  avr32: clean up memory allocation in at32_add_device_mci
  arch/avr32: Fix build failure for avr32 caused by typo

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Fix address masking bug in hpte_need_flush()

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: fix dentry hash calculation for case-insensitive mounts
  [CIFS] Don't cache timestamps on utimes due to coarse granularity
  [CIFS] Maximum username length check in session setup does not match
  cifs: fix length calculation for converted unicode readdir names
  [CIFS] Add support for TCP_NODELAY

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (29 commits)
  drivers/net: Correct NULL test
  MAINTAINERS: networking drivers - Add git net-next tree
  net/sched: Fix module name in Kconfig
  cxgb3: fix GRO checksum check
  dst: call cond_resched() in dst_gc_task()
  netfilter: nf_conntrack: fix hash resizing with namespaces
  netfilter: xtables: compat out of scope fix
  netfilter: nf_conntrack: restrict runtime expect hashsize modifications
  netfilter: nf_conntrack: per netns nf_conntrack_cachep
  netfilter: nf_conntrack: fix memory corruption with multiple namespaces
  Bluetooth: Keep a copy of each HID device's report descriptor
  pktgen: Fix freezing problem
  igb: make certain to reassign legacy interrupt vectors after reset
  irda: add missing BKL in irnet_ppp ioctl
  irda: unbalanced lock_kernel in irnet_ppp
  ixgbe: Fix return of invalid txq
  ixgbe: Fix ixgbe_tx_map error path
  netxen: protect resource cleanup by rtnl lock
  netxen: fix tx timeout recovery for NX2031 chip
  Bluetooth: Enter active mode before establishing a SCO link.
  ...

Commit f71dc176 'Make
hpte_need_flush() correctly mask for multiple page sizes' introduced
bug, which is triggered when a kernel with a 64k base page size is run
on a system whose hardware does not 64k hash PTEs.  In this case, we
emulate 64k pages with multiple 4k hash PTEs, however in
hpte_need_flush() we incorrectly only mask the hardware page size from
the address, instead of the logical page size.  This causes things to
go wrong when we later attempt to iterate through the hardware
subpages of the logical page.

This patch corrects the error.  It has been tested on pSeries bare
metal by Michael Neuling.
Signed-off-by: NDavid Gibson <dwg@au1.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

* 'for-linus' of git://neil.brown.name/md:
  md: fix some lockdep issues between md and sysfs.
  md: fix 'degraded' calculation when starting a reshape.

======
This fix is related to
    http://bugzilla.kernel.org/show_bug.cgi?id=15142
but does not address that exact issue.
======

sysfs does like attributes being removed while they are being accessed
(i.e. read or written) and waits for the access to complete.

As accessing some md attributes takes the same lock that is held while
removing those attributes a deadlock can occur.

This patch addresses 3 issues in md that could lead to this deadlock.

Two relate to calling flush_scheduled_work while the lock is held.
This is probably a bad idea in general and as we use schedule_work to
delete various sysfs objects it is particularly bad.

In one case flush_scheduled_work is called from md_alloc (called by
md_probe) called from do_md_run which holds the lock.  This call is
only present to ensure that ->gendisk is set.  However we can be sure
that gendisk is always set (though possibly we couldn't when that code
was originally written.  This is because do_md_run is called in three
different contexts:
  1/ from md_ioctl.  This requires that md_open has succeeded, and it
     fails if ->gendisk is not set.
  2/ from writing a sysfs attribute.  This can only happen if the
     mddev has been registered in sysfs which happens in md_alloc
     after ->gendisk has been set.
  3/ from autorun_array which is only called by autorun_devices, which
     checks for ->gendisk to be set before calling autorun_array.
So the call to md_probe in do_md_run can be removed, and the check on
->gendisk can also go.


In the other case flush_scheduled_work is being called in do_md_stop,
purportedly to wait for all md_delayed_delete calls (which delete the
component rdevs) to complete.  However there really isn't any need to
wait for them - they have already been disconnected in all important
ways.

The third issue is that raid5->stop() removes some attribute names
while the lock is held.  There is already some infrastructure in place
to delay attribute removal until after the lock is released (using
schedule_work).  So extend that infrastructure to remove the
raid5_attrs_group.

This does not address all lockdep issues related to the sysfs
"s_active" lock.  The rest can be address by splitting that lockdep
context between symlinks and non-symlinks which hopefully will happen.
Signed-off-by: NNeilBrown <neilb@suse.de>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  9p: fix p9_client_destroy unconditional calling v9fs_put_trans
  9p: fix memory leak in v9fs_parse_options()
  9p: Fix the kernel crash on a failed mount
  9p: fix option parsing
  9p: Include fsync support for 9p client
  net/9p: fix statsize inside twstat
  net/9p: fail when user specifies a transport which we can't find
  net/9p: fix virtio transport to correctly update status on connect

PIT control word (address 0x43) is write-only, reads are undefined.

Cc: stable@kernel.org
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Current kvm wallclock does not consider the total_sleep_time which could cause
wrong wallclock in guest after host suspend/resume. This patch solve
this issue by counting total_sleep_time to get the correct host boot time.

Cc: stable@kernel.org
Signed-off-by: NJason Wang <jasowang@redhat.com>
Acked-by: NGlauber Costa <glommer@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Export getboottime and monotonic_to_bootbased in order to let them
could be used by following patch.

Cc: stable@kernel.org
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Offsets and sizes are wrong for 32 bit.
Got broken with 866ba284 "[S390] cleanup lowcore.h".
Reported-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

If a CHPID is offline during a device shutdown the ccw_device_halt|clear
may fail and the qdio device stays in state STOPPED until the shutdown is
finished. If an interrupt occurs before the device is set to INACTIVE
the STOPPED state triggers a WARN_ON in the interrupt handler.
Prevent this WARN_ON by catching the STOPPED state in the interrupt
handler.
Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Inbound traffic handling may hang if next buffer to check is in
state ERROR, polling is stopped and the final check for further
available inbound buffers disregards buffers in state ERROR.
This patch includes state ERROR when checking availability of
more inbound buffers.

Cc: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Test the value that was just allocated rather than the previously tested one.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@r@
expression *x;
expression e;
identifier l;
@@

if (x == NULL || ...) {
    ... when forall
    return ...; }
... when != goto l;
    when != x = e
    when != &x
*x == NULL
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

During the rc period, patches that are not bugfixes
should be done using the net-next tree.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The action modules have been prefixed with 'act_', but the Kconfig
description was not changed.
Signed-off-by: NJan Luebbe <jluebbe@debian.org>
Acked-by: NJamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Verify the HW checksum state for frames handed to GRO processing.
Signed-off-by: NDivy Le Ray <divy@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This code was written long ago when it was not possible to
reshape a degraded array.  Now it is so the current level of
degraded-ness needs to be taken in to account.  Also newly addded
devices should only reduce degradedness if they are deemed to be
in-sync.

In particular, if you convert a RAID5 to a RAID6, and increase the
number of devices at the same time, then the 5->6 conversion will
make the array degraded so the current code will produce a wrong
value for 'degraded' - "-1" to be precise.

If the reshape runs to completion end_reshape will calculate a correct
new value for 'degraded', but if a device fails during the reshape an
incorrect decision might be made based on the incorrect value of
"degraded".

This patch is suitable for 2.6.32-stable and if they are still open,
2.6.31-stable and 2.6.30-stable as well.

Cc: stable@kernel.org
Reported-by: NMichael Evans <mjevans1983@gmail.com>
Signed-off-by: NNeilBrown <neilb@suse.de>

* 'for-2.6.33' of git://linux-nfs.org/~bfields/linux:
  Revert "nfsd4: fix error return when pseudoroot missing"