提交 ea08de16 编写于 作者: J Javier Martinez Canillas 提交者: Kukjin Kim

ARM: dts: Add DISP1 power domain for exynos5420

The DISP1 power domain on Exynos5420 SoC includes the FIMD1, MIXER
and HDMI modules. Add a device node for this power domain and mark
these modules as consumer of the DISP1 power domain.

When a power domain is powered on and off, the input clocks of the
devices attached to it are reparented. So a reference to the input
and parent clocks of the devices are needed to manage that.
Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: NKukjin Kim <kgene@kernel.org>
上级 88560100
......@@ -274,6 +274,20 @@
#power-domain-cells = <0>;
};
disp_pd: power-domain@100440C0 {
compatible = "samsung,exynos4210-pd";
reg = <0x100440C0 0x20>;
#power-domain-cells = <0>;
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK200>,
<&clock CLK_MOUT_USER_ACLK200_DISP1>,
<&clock CLK_MOUT_SW_ACLK300>,
<&clock CLK_MOUT_USER_ACLK300_DISP1>,
<&clock CLK_MOUT_SW_ACLK400>,
<&clock CLK_MOUT_USER_ACLK400_DISP1>;
clock-names = "oscclk", "pclk0", "clk0",
"pclk1", "clk1", "pclk2", "clk2";
};
pinctrl_0: pinctrl@13400000 {
compatible = "samsung,exynos5420-pinctrl";
reg = <0x13400000 0x1000>;
......@@ -541,6 +555,7 @@
fimd: fimd@14400000 {
clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
clock-names = "sclk_fimd", "fimd";
power-domains = <&disp_pd>;
};
adc: adc@12D10000 {
......@@ -714,6 +729,7 @@
phy = <&hdmiphy>;
samsung,syscon-phandle = <&pmu_system_controller>;
status = "disabled";
power-domains = <&disp_pd>;
};
hdmiphy: hdmiphy@145D0000 {
......@@ -726,6 +742,7 @@
interrupts = <0 94 0>;
clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "sclk_hdmi";
power-domains = <&disp_pd>;
};
gsc_0: video-scaler@13e00000 {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册