提交 70b72406 编写于 作者: J Jean Delvare 提交者: Jean Delvare

hwmon: (lm93) Convert to a new-style i2c driver

The new-style lm93 driver implements the optional detect() callback
to cover the use cases of the legacy driver.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Cc: Eric J. Bowersox <ericb@aspsys.com>
Cc: Carsten Emde <cbe@osadl.org>
Cc: Hans J. Koch <hjk@linutronix.de>
上级 910e8dcf
......@@ -200,7 +200,6 @@ struct block1_t {
* Client-specific data
*/
struct lm93_data {
struct i2c_client client;
struct device *hwmon_dev;
struct mutex update_lock;
......@@ -2501,45 +2500,14 @@ static void lm93_init_client(struct i2c_client *client)
"chip to signal ready!\n");
}
static int lm93_detect(struct i2c_adapter *adapter, int address, int kind)
/* Return 0 if detection is successful, -ENODEV otherwise */
static int lm93_detect(struct i2c_client *client, int kind,
struct i2c_board_info *info)
{
struct lm93_data *data;
struct i2c_client *client;
int err = -ENODEV, func;
void (*update)(struct lm93_data *, struct i2c_client *);
/* choose update routine based on bus capabilities */
func = i2c_get_functionality(adapter);
if ( ((LM93_SMBUS_FUNC_FULL & func) == LM93_SMBUS_FUNC_FULL) &&
(!disable_block) ) {
dev_dbg(&adapter->dev,"using SMBus block data transactions\n");
update = lm93_update_client_full;
} else if ((LM93_SMBUS_FUNC_MIN & func) == LM93_SMBUS_FUNC_MIN) {
dev_dbg(&adapter->dev,"disabled SMBus block data "
"transactions\n");
update = lm93_update_client_min;
} else {
dev_dbg(&adapter->dev,"detect failed, "
"smbus byte and/or word data not supported!\n");
goto err_out;
}
struct i2c_adapter *adapter = client->adapter;
/* OK. For now, we presume we have a valid client. We now create the
client structure, even though we cannot fill it completely yet.
But it allows us to access lm78_{read,write}_value. */
if ( !(data = kzalloc(sizeof(struct lm93_data), GFP_KERNEL))) {
dev_dbg(&adapter->dev,"out of memory!\n");
err = -ENOMEM;
goto err_out;
}
client = &data->client;
i2c_set_clientdata(client, data);
client->addr = address;
client->adapter = adapter;
client->driver = &lm93_driver;
if (!i2c_check_functionality(adapter, LM93_SMBUS_FUNC_MIN))
return -ENODEV;
/* detection */
if (kind < 0) {
......@@ -2548,7 +2516,7 @@ static int lm93_detect(struct i2c_adapter *adapter, int address, int kind)
if (mfr != 0x01) {
dev_dbg(&adapter->dev,"detect failed, "
"bad manufacturer id 0x%02x!\n", mfr);
goto err_free;
return -ENODEV;
}
}
......@@ -2563,31 +2531,61 @@ static int lm93_detect(struct i2c_adapter *adapter, int address, int kind)
if (kind == 0)
dev_dbg(&adapter->dev,
"(ignored 'force' parameter)\n");
goto err_free;
return -ENODEV;
}
}
/* fill in remaining client fields */
strlcpy(client->name, "lm93", I2C_NAME_SIZE);
strlcpy(info->type, "lm93", I2C_NAME_SIZE);
dev_dbg(&adapter->dev,"loading %s at %d,0x%02x\n",
client->name, i2c_adapter_id(client->adapter),
client->addr);
return 0;
}
static int lm93_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct lm93_data *data;
int err, func;
void (*update)(struct lm93_data *, struct i2c_client *);
/* choose update routine based on bus capabilities */
func = i2c_get_functionality(client->adapter);
if (((LM93_SMBUS_FUNC_FULL & func) == LM93_SMBUS_FUNC_FULL) &&
(!disable_block)) {
dev_dbg(&client->dev, "using SMBus block data transactions\n");
update = lm93_update_client_full;
} else if ((LM93_SMBUS_FUNC_MIN & func) == LM93_SMBUS_FUNC_MIN) {
dev_dbg(&client->dev, "disabled SMBus block data "
"transactions\n");
update = lm93_update_client_min;
} else {
dev_dbg(&client->dev, "detect failed, "
"smbus byte and/or word data not supported!\n");
err = -ENODEV;
goto err_out;
}
data = kzalloc(sizeof(struct lm93_data), GFP_KERNEL);
if (!data) {
dev_dbg(&client->dev, "out of memory!\n");
err = -ENOMEM;
goto err_out;
}
i2c_set_clientdata(client, data);
/* housekeeping */
data->valid = 0;
data->update = update;
mutex_init(&data->update_lock);
/* tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(client)))
goto err_free;
/* initialize the chip */
lm93_init_client(client);
err = sysfs_create_group(&client->dev.kobj, &lm93_attr_grp);
if (err)
goto err_detach;
goto err_free;
/* Register hwmon driver class */
data->hwmon_dev = hwmon_device_register(&client->dev);
......@@ -2597,43 +2595,39 @@ static int lm93_detect(struct i2c_adapter *adapter, int address, int kind)
err = PTR_ERR(data->hwmon_dev);
dev_err(&client->dev, "error registering hwmon device.\n");
sysfs_remove_group(&client->dev.kobj, &lm93_attr_grp);
err_detach:
i2c_detach_client(client);
err_free:
kfree(data);
err_out:
return err;
}
/* This function is called when:
* lm93_driver is inserted (when this module is loaded), for each
available adapter
* when a new adapter is inserted (and lm93_driver is still present) */
static int lm93_attach_adapter(struct i2c_adapter *adapter)
{
return i2c_probe(adapter, &addr_data, lm93_detect);
}
static int lm93_detach_client(struct i2c_client *client)
static int lm93_remove(struct i2c_client *client)
{
struct lm93_data *data = i2c_get_clientdata(client);
int err = 0;
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &lm93_attr_grp);
err = i2c_detach_client(client);
if (!err)
kfree(data);
return err;
kfree(data);
return 0;
}
static const struct i2c_device_id lm93_id[] = {
{ "lm93", lm93 },
{ }
};
MODULE_DEVICE_TABLE(i2c, lm93_id);
static struct i2c_driver lm93_driver = {
.class = I2C_CLASS_HWMON,
.driver = {
.name = "lm93",
},
.attach_adapter = lm93_attach_adapter,
.detach_client = lm93_detach_client,
.probe = lm93_probe,
.remove = lm93_remove,
.id_table = lm93_id,
.detect = lm93_detect,
.address_data = &addr_data,
};
static int __init lm93_init(void)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册