Skip to content

T
Third Party Zlib

OpenHarmony / Third Party Zlib
1 年多 前同步成功

通知 16
Star 112
Fork 2
T
Third Party Zlib
提交 b253b171 编写于 作者: S shuaiyutao
浏览文件
操作

upgrade zlib to v1.2.12 

Change-Id: I156b5b16bbd93817ed1f1ad975c1a1dbdfb520f0
Signed-off-by: Nshuaiyutao <shuaiyutao1@huawei.com>
上级 5ee30652
展开全部 隐藏空白更改
内联 并排
Showing with 12201 addition and 7845 deletion
BUILD.gn
浏览文件 @ b253b171
......@@ -7,6 +7,7 @@ config("zlib_config") {
cflags = [
"-Wno-incompatible-pointer-types",
"-Werror",
"-Wno-strict-prototypes",
"-Wimplicit-function-declaration",
]
}
......
CMakeLists.txt
浏览文件 @ b253b171
......@@ -3,7 +3,7 @@ set(CMAKE_ALLOW_LOOSE_LOOP_CONSTRUCTS ON)
project(zlib C)
set(VERSION "1.2.11")
set(VERSION "1.2.12")
option(ASM686 "Enable building i686 assembly implementation")
option(AMD64 "Enable building amd64 assembly implementation")
......
COPYRIGHT.OpenSource
浏览文件 @ b253b171
Copyright (C) 1995-2006, 2011, 2016 Jean-loup Gailly
Copyright (C) 2011, 2016 Mark Adler
Copyright (C) 1995-2006, 2010, 2011, 2016 Jean-loup Gailly
Copyright (C) 1995-2003 Mark Adler
Copyright (C) 2003 Chris Anderson <christop@charm.net>
2005 - Adaptation to Microsoft C Compiler for AMD64 by Gilles Vollant
Copyright (C) 1995-2003 Jean-loup Gailly and Mark Adler.
Copyright (C) 1998 by Bob Dellaca.
Copyright (C) 2003 by Cosmin Truta.
Copyright (C) 1995-2003 by Jean-loup Gailly.
Copyright (C) 1998,1999,2000 by Jacques Nomssi Nzali.
Copyright (C) 1995-2011, 2016 Mark Adler
Copyright (C) 1995-2005, 2014, 2016 Jean-loup Gailly, Mark Adler
Copyright (C) 1995-2006, 2010, 2011, 2012, 2016 Mark Adler
Copyright (C) 1995-2017 Jean-loup Gailly and Mark Adler
Copyright (C) 1995-2016 Jean-loup Gailly
Copyright (C) 2004, 2010 Mark Adler
Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013, 2016 Mark Adler
Copyright (C) 2004-2017 Mark Adler
Copyright (C) 1995-2016 Mark Adler
Copyright (C) 1995-2017 Mark Adler
Copyright (C) 1995-2003, 2010 Mark Adler
Copyright (C) 1995-2005, 2010 Mark Adler
(C) 1995-2017 Jean-loup Gailly and Mark Adler
Copyright (C) 1995-2017 Jean-loup Gailly
Copyright (C) 1995-2003, 2010, 2014, 2016 Jean-loup Gailly, Mark Adler
Copyright (C) 1995-2016 Jean-loup Gailly, Mark Adler
Copyright (C) 1995-2008 Mark Adler
Copyright (C) 2003 Mark Adler
Copyright (C) 1998-2005 Gilles Vollant
Copyright (C) 1998-2010 Gilles Vollant (minizip) ( http:www.winimage.com/zLibDll/minizip.html )
Copyright (C) 2009-2010 Mathias Svensson ( http:result42.com )
Copyright (C) 2007-2008 Even Rouault
Copyright (c) 1990-2000 Info-ZIP. All rights reserved.
Copyright (C) 1998 - 2010 Gilles Vollant, Even Rouault, Mathias Svensson
Copyright (c) 1997
Copyright (C) 2002-2013 Mark Adler
Copyright (C) 2002-2013 Mark Adler, all rights reserved
Copyright (C) 2003, 2012, 2013 Mark Adler
Copyright (c) 1995-2011, 2016 Mark Adler
Copyright (c) 1995-2022 Mark Adler
Copyright (c) 1995-2022 Jean-loup Gailly and Mark Adler
Copyright 1995-2022 Jean-loup Gailly and Mark Adler
Copyright (c) 1995-2018 Jean-loup Gailly
Copyright (c) 2004, 2010 Mark Adler
Copyright (c) 2004-2019 Mark Adler
Copyright (c) 2004-2017 Mark Adler
Copyright (c) 1995-2017 Mark Adler
Copyright (c) 1995-2003, 2010 Mark Adler
Copyright (c) 1995-2019 Mark Adler
Copyright 1995-2022 Mark Adler
Copyright (c) 1995-2005, 2010 Mark Adler
Copyright (c) 1995-2017 Jean-loup Gailly, Mark Adler
(c) 1995-2022 Jean-loup Gailly and Mark Adler
Copyright (c) 1995-2021 Jean-loup Gailly
Copyright (c) 1995-2003, 2010, 2014, 2016 Jean-loup Gailly, Mark Adler
Copyright (c) 1995-2016 Jean-loup Gailly, Mark Adler
Copyright (c) 1995-2017 Jean-loup Gailly
Copyright (c) 1995-2022 Jean-loup Gailly, Mark Adler
Copyright (c) 1998 by Andreas R. Kleinert
Copyright Jean-loup Gailly Osma Ahvenlampi <Osma.Ahvenlampi@hut.fi>
Copyright (c) 2002-2004 Dmitriy Anisimkov
Copyright (c) 2002-2003 Dmitriy Anisimkov
Copyright (c) 2003, 2012, 2013 Mark Adler
Copyright (c) 1997,99 Borland Corp.
Copyright (c) 1997,99 Borland Corporation
Copyright (c) Henrik Ravn 2004
Copyright (C) 2007, 2008, 2012 Mark Adler
Copyright (C) 2003, 2005, 2008, 2010, 2012 Mark Adler
Copyright (C) 2003, 2012 Mark Adler, all rights reserved
Copyright (C) 2004, 2005, 2012 Mark Adler, all rights reserved
Copyright (C) 2004, 2008, 2012, 2016 Mark Adler, all rights reserved
Copyright (C) 2004, 2008, 2012 Mark Adler, all rights reserved
Copyright (C) 2005, 2012 Mark Adler
(C) Copyright Henrik Ravn 2004
\ No newline at end of file
Copyright (c) 2004 by Henrik Ravn
(c) Copyright Henrik Ravn 2004
Copyright (c) 1995-2010 Jean-loup Gailly, Brian Raiter and Gilles Vollant
Copyright (c) 1995-2008 Mark Adler
Copyright (c) 2003 Mark Adler
Copyright (c) 1995-2003 Mark Adler
Copyright (c) 1997 Christian Michelsen Research AS Advanced Computing
Copyright (c) 1998-2005 Gilles Vollant
Copyright (c) 1998-2010 Gilles Vollant (minizip)
Copyright (c) 2009-2010 Mathias Svensson
Copyright (c) 2007-2008 Even Rouault
Copyright (c) 1998-2010 - by Gilles Vollant
Copyright (c) 1990-2000 Info-ZIP.
Copyright (c) 1998 - 2010 Gilles Vollant, Even Rouault, Mathias Svensson
Copyright 1998-2004 Gilles Vollant
Copyright (c) 1995-2003 Jean-loup Gailly
Copyright (c) 1998 by Jacques Nomssi Nzali
Copyright (c) 2003 by Cosmin Truta
Copyright (c) 1995-2003 Jean-loup Gailly and Mark Adler
Copyright (c) 1998 by Bob Dellaca
Copyright (c) 1995-2003 by Jean-loup Gailly
Copyright (c) 1998,1999,2000 by Jacques Nomssi Nzali
Copyright (c) 2003 Cosmin Truta
Copyright (c) 2002-2013 Mark Adler
(c) 1995-2022 Jean-loup Gailly & Mark Adler
Copyright (c) 1996 L. Peter Deutsch and Jean-Loup Gailly
Copyright (c) 1996 L. Peter Deutsch
Copyright (c) 2007, 2008, 2012, 2018 Mark Adler
Copyright (c) 2003, 2005, 2008, 2010, 2012 Mark Adler
Copyright (c) 2003-2010 Mark Adler
Copyright (c) 2003, 2012 Mark Adler
Copyright (c) 2004, 2005, 2012 Mark Adler
Copyright (c) 2004, 2008, 2012, 2016, 2019 Mark Adler
Copyright (c) 2004, 2008, 2012 Mark Adler
Copyright (c) 2018 Mark Adler
Copyright (c) 2004, 2005 Mark Adler
Copyright (c) 2004, 2005 by Mark Adler
Copyright (c) 2005, 2012, 2018 Mark Adler
Copyright (c) 1995-1998 Jean-loup Gailly
Copyright (c) 1995-2006, 2011, 2016 Jean-loup Gailly
Copyright (c) 2011, 2016 Mark Adler
Copyright (c) 1995-2006, 2010, 2011, 2016 Jean-loup Gailly
copyright (c) 1995-2017 Jean-loup Gailly and Mark Adler
(c) 1995-2017 Jean-loup Gailly and Mark Adler
(c) 1995-2017 Jean-loup Gailly & Mark Adler
ChangeLog
浏览文件 @ b253b171
ChangeLog file for zlib
Changes in 1.2.12 (27 Mar 2022)
- Cygwin does not have _wopen(), so do not create gzopen_w() there
- Permit a deflateParams() parameter change as soon as possible
- Limit hash table inserts after switch from stored deflate
- Fix bug when window full in deflate_stored()
- Fix CLEAR_HASH macro to be usable as a single statement
- Avoid a conversion error in gzseek when off_t type too small
- Have Makefile return non-zero error code on test failure
- Avoid some conversion warnings in gzread.c and gzwrite.c
- Update use of errno for newer Windows CE versions
- Small speedup to inflate [psumbera]
- Return an error if the gzputs string length can't fit in an int
- Add address checking in clang to -w option of configure
- Don't compute check value for raw inflate if asked to validate
- Handle case where inflateSync used when header never processed
- Avoid the use of ptrdiff_t
- Avoid an undefined behavior of memcpy() in gzappend()
- Avoid undefined behaviors of memcpy() in gz*printf()
- Avoid an undefined behavior of memcpy() in _tr_stored_block()
- Make the names in functions declarations identical to definitions
- Remove old assembler code in which bugs have manifested
- Fix deflateEnd() to not report an error at start of raw deflate
- Add legal disclaimer to README
- Emphasize the need to continue decompressing gzip members
- Correct the initialization requirements for deflateInit2()
- Fix a bug that can crash deflate on some input when using Z_FIXED
- Assure that the number of bits for deflatePrime() is valid
- Use a structure to make globals in enough.c evident
- Use a macro for the printf format of big_t in enough.c
- Clean up code style in enough.c, update version
- Use inline function instead of macro for index in enough.c
- Clarify that prefix codes are counted in enough.c
- Show all the codes for the maximum tables size in enough.c
- Add gznorm.c example, which normalizes gzip files
- Fix the zran.c example to work on a multiple-member gzip file
- Add tables for crc32_combine(), to speed it up by a factor of 200
- Add crc32_combine_gen() and crc32_combine_op() for fast combines
- Speed up software CRC-32 computation by a factor of 1.5 to 3
- Use atomic test and set, if available, for dynamic CRC tables
- Don't bother computing check value after successful inflateSync()
- Correct comment in crc32.c
- Add use of the ARMv8 crc32 instructions when requested
- Use ARM crc32 instructions if the ARM architecture has them
- Explicitly note that the 32-bit check values are 32 bits
- Avoid adding empty gzip member after gzflush with Z_FINISH
- Fix memory leak on error in gzlog.c
- Fix error in comment on the polynomial representation of a byte
- Clarify gz* function interfaces, referring to parameter names
- Change macro name in inflate.c to avoid collision in VxWorks
- Correct typo in blast.c
- Improve portability of contrib/minizip
- Fix indentation in minizip's zip.c
- Replace black/white with allow/block. (theresa-m)
- minizip warning fix if MAXU32 already defined. (gvollant)
- Fix unztell64() in minizip to work past 4GB. (Daniël Hörchner)
- Clean up minizip to reduce warnings for testing
- Add fallthrough comments for gcc
- Eliminate use of ULL constants
- Separate out address sanitizing from warnings in configure
- Remove destructive aspects of make distclean
- Check for cc masquerading as gcc or clang in configure
- Fix crc32.c to compile local functions only if used
Changes in 1.2.11 (15 Jan 2017)
- Fix deflate stored bug when pulling last block from window
- Permit immediate deflateParams changes before any deflate input
......@@ -511,7 +574,7 @@ Changes in 1.2.3.5 (8 Jan 2010)
- Don't use _vsnprintf on later versions of MSVC [Lowman]
- Add CMake build script and input file [Lowman]
- Update contrib/minizip to 1.1 [Svensson, Vollant]
- Moved nintendods directory from contrib to .
- Moved nintendods directory from contrib to root
- Replace gzio.c with a new set of routines with the same functionality
- Add gzbuffer(), gzoffset(), gzclose_r(), gzclose_w() as part of above
- Update contrib/minizip to 1.1b
......@@ -685,7 +748,7 @@ Changes in 1.2.2.4 (11 July 2005)
- Be more strict on incomplete code sets in inflate_table() and increase
ENOUGH and MAXD -- this repairs a possible security vulnerability for
invalid inflate input. Thanks to Tavis Ormandy and Markus Oberhumer for
discovering the vulnerability and providing test cases.
discovering the vulnerability and providing test cases
- Add ia64 support to configure for HP-UX [Smith]
- Add error return to gzread() for format or i/o error [Levin]
- Use malloc.h for OS/2 [Necasek]
......@@ -721,7 +784,7 @@ Changes in 1.2.2.2 (30 December 2004)
- Add Z_FIXED strategy option to deflateInit2() to force fixed trees
- Add updated make_vms.com [Coghlan], update README
- Create a new "examples" directory, move gzappend.c there, add zpipe.c,
fitblk.c, gzlog.[ch], gzjoin.c, and zlib_how.html.
fitblk.c, gzlog.[ch], gzjoin.c, and zlib_how.html
- Add FAQ entry and comments in deflate.c on uninitialized memory access
- Add Solaris 9 make options in configure [Gilbert]
- Allow strerror() usage in gzio.c for STDC
......@@ -792,7 +855,7 @@ Changes in 1.2.1.1 (9 January 2004)
- Fix a big fat bug in inftrees.c that prevented decoding valid
dynamic blocks with only literals and no distance codes --
Thanks to "Hot Emu" for the bug report and sample file
- Add a note to puff.c on no distance codes case.
- Add a note to puff.c on no distance codes case
Changes in 1.2.1 (17 November 2003)
- Remove a tab in contrib/gzappend/gzappend.c
......@@ -1036,14 +1099,14 @@ Changes in 1.2.0 (9 March 2003)
- Add contrib/puff/ simple inflate for deflate format description
Changes in 1.1.4 (11 March 2002)
- ZFREE was repeated on same allocation on some error conditions.
- ZFREE was repeated on same allocation on some error conditions
This creates a security problem described in
http://www.zlib.org/advisory-2002-03-11.txt
- Returned incorrect error (Z_MEM_ERROR) on some invalid data
- Avoid accesses before window for invalid distances with inflate window
less than 32K.
less than 32K
- force windowBits > 8 to avoid a bug in the encoder for a window size
of 256 bytes. (A complete fix will be available in 1.1.5).
of 256 bytes. (A complete fix will be available in 1.1.5)
Changes in 1.1.3 (9 July 1998)
- fix "an inflate input buffer bug that shows up on rare but persistent
......@@ -1117,7 +1180,7 @@ Changes in 1.1.1 (27 Feb 98)
- remove block truncation heuristic which had very marginal effect for zlib
(smaller lit_bufsize than in gzip 1.2.4) and degraded a little the
compression ratio on some files. This also allows inlining _tr_tally for
matches in deflate_slow.
matches in deflate_slow
- added msdos/Makefile.w32 for WIN32 Microsoft Visual C++ (Bob Frazier)
Changes in 1.1.0 (24 Feb 98)
......@@ -1162,7 +1225,7 @@ Changes in 1.0.8 (27 Jan 1998)
- include sys/types.h to get off_t on some systems (Marc Lehmann & QingLong)
- use constant arrays for the static trees in trees.c instead of computing
them at run time (thanks to Ken Raeburn for this suggestion). To create
trees.h, compile with GEN_TREES_H and run "make test".
trees.h, compile with GEN_TREES_H and run "make test"
- check return code of example in "make test" and display result
- pass minigzip command line options to file_compress
- simplifying code of inflateSync to avoid gcc 2.8 bug
......@@ -1201,12 +1264,12 @@ Changes in 1.0.6 (19 Jan 1998)
- add functions gzprintf, gzputc, gzgetc, gztell, gzeof, gzseek, gzrewind and
gzsetparams (thanks to Roland Giersig and Kevin Ruland for some of this code)
- Fix a deflate bug occurring only with compression level 0 (thanks to
Andy Buckler for finding this one).
- In minigzip, pass transparently also the first byte for .Z files.
Andy Buckler for finding this one)
- In minigzip, pass transparently also the first byte for .Z files
- return Z_BUF_ERROR instead of Z_OK if output buffer full in uncompress()
- check Z_FINISH in inflate (thanks to Marc Schluper)
- Implement deflateCopy (thanks to Adam Costello)
- make static libraries by default in configure, add --shared option.
- make static libraries by default in configure, add --shared option
- move MSDOS or Windows specific files to directory msdos
- suppress the notion of partial flush to simplify the interface
(but the symbol Z_PARTIAL_FLUSH is kept for compatibility with 1.0.4)
......@@ -1218,7 +1281,7 @@ Changes in 1.0.6 (19 Jan 1998)
- added Makefile.nt (thanks to Stephen Williams)
- added the unsupported "contrib" directory:
contrib/asm386/ by Gilles Vollant <info@winimage.com>
386 asm code replacing longest_match().
386 asm code replacing longest_match()
contrib/iostream/ by Kevin Ruland <kevin@rodin.wustl.edu>
A C++ I/O streams interface to the zlib gz* functions
contrib/iostream2/ by Tyge Løvset <Tyge.Lovset@cmr.no>
......@@ -1226,7 +1289,7 @@ Changes in 1.0.6 (19 Jan 1998)
contrib/untgz/ by "Pedro A. Aranda Guti\irrez" <paag@tid.es>
A very simple tar.gz file extractor using zlib
contrib/visual-basic.txt by Carlos Rios <c_rios@sonda.cl>
How to use compress(), uncompress() and the gz* functions from VB.
How to use compress(), uncompress() and the gz* functions from VB
- pass params -f (filtered data), -h (huffman only), -1 to -9 (compression
level) in minigzip (thanks to Tom Lane)
......@@ -1235,8 +1298,8 @@ Changes in 1.0.6 (19 Jan 1998)
- add undocumented function inflateSyncPoint() (hack for Paul Mackerras)
- add undocumented function zError to convert error code to string
(for Tim Smithers)
- Allow compilation of gzio with -DNO_DEFLATE to avoid the compression code.
- Use default memcpy for Symantec MSDOS compiler.
- Allow compilation of gzio with -DNO_DEFLATE to avoid the compression code
- Use default memcpy for Symantec MSDOS compiler
- Add EXPORT keyword for check_func (needed for Windows DLL)
- add current directory to LD_LIBRARY_PATH for "make test"
- create also a link for libz.so.1
......@@ -1249,7 +1312,7 @@ Changes in 1.0.6 (19 Jan 1998)
- allow compilation with ANSI keywords only enabled for TurboC in large model
- avoid "versionString"[0] (Borland bug)
- add NEED_DUMMY_RETURN for Borland
- use variable z_verbose for tracing in debug mode (L. Peter Deutsch).
- use variable z_verbose for tracing in debug mode (L. Peter Deutsch)
- allow compilation with CC
- defined STDC for OS/2 (David Charlap)
- limit external names to 8 chars for MVS (Thomas Lund)
......@@ -1259,7 +1322,7 @@ Changes in 1.0.6 (19 Jan 1998)
- use _fdopen instead of fdopen for MSC >= 6.0 (Thomas Fanslau)
- added makelcc.bat for lcc-win32 (Tom St Denis)
- in Makefile.dj2, use copy and del instead of install and rm (Frank Donahoe)
- Avoid expanded $Id$. Use "rcs -kb" or "cvs admin -kb" to avoid Id expansion.
- Avoid expanded $Id$. Use "rcs -kb" or "cvs admin -kb" to avoid Id expansion
- check for unistd.h in configure (for off_t)
- remove useless check parameter in inflate_blocks_free
- avoid useless assignment of s->check to itself in inflate_blocks_new
......@@ -1280,7 +1343,7 @@ Changes in 1.0.5 (3 Jan 98)
Changes in 1.0.4 (24 Jul 96)
- In very rare conditions, deflate(s, Z_FINISH) could fail to produce an EOF
bit, so the decompressor could decompress all the correct data but went
on to attempt decompressing extra garbage data. This affected minigzip too.
on to attempt decompressing extra garbage data. This affected minigzip too
- zlibVersion and gzerror return const char* (needed for DLL)
- port to RISCOS (no fdopen, no multiple dots, no unlink, no fileno)
- use z_error only for DEBUG (avoid problem with DLLs)
......@@ -1310,7 +1373,7 @@ Changes in 1.0.1 (20 May 96) [1.0 skipped to avoid confusion]
- fix array overlay in deflate.c which sometimes caused bad compressed data
- fix inflate bug with empty stored block
- fix MSDOS medium model which was broken in 0.99
- fix deflateParams() which could generate bad compressed data.
- fix deflateParams() which could generate bad compressed data
- Bytef is define'd instead of typedef'ed (work around Borland bug)
- added an INDEX file
- new makefiles for DJGPP (Makefile.dj2), 32-bit Borland (Makefile.b32),
......@@ -1331,7 +1394,7 @@ Changes in 0.99 (27 Jan 96)
- allow preset dictionary shared between compressor and decompressor
- allow compression level 0 (no compression)
- add deflateParams in zlib.h: allow dynamic change of compression level
and compression strategy.
and compression strategy
- test large buffers and deflateParams in example.c
- add optional "configure" to build zlib as a shared library
- suppress Makefile.qnx, use configure instead
......@@ -1373,30 +1436,30 @@ Changes in 0.99 (27 Jan 96)
- use STDC instead of __GO32__ to avoid redeclaring exit, calloc, etc...
- use Z_BINARY instead of BINARY
- document that gzclose after gzdopen will close the file
- allow "a" as mode in gzopen.
- allow "a" as mode in gzopen
- fix error checking in gzread
- allow skipping .gz extra-field on pipes
- added reference to Perl interface in README
- put the crc table in FAR data (I dislike more and more the medium model :)
- added get_crc_table
- added a dimension to all arrays (Borland C can't count).
- added a dimension to all arrays (Borland C can't count)
- workaround Borland C bug in declaration of inflate_codes_new & inflate_fast
- guard against multiple inclusion of *.h (for precompiled header on Mac)
- Watcom C pretends to be Microsoft C small model even in 32 bit mode.
- Watcom C pretends to be Microsoft C small model even in 32 bit mode
- don't use unsized arrays to avoid silly warnings by Visual C++:
warning C4746: 'inflate_mask' : unsized array treated as '__far'
(what's wrong with far data in far model?).
(what's wrong with far data in far model?)
- define enum out of inflate_blocks_state to allow compilation with C++
Changes in 0.95 (16 Aug 95)
- fix MSDOS small and medium model (now easier to adapt to any compiler)
- inlined send_bits
- fix the final (:-) bug for deflate with flush (output was correct but
not completely flushed in rare occasions).
not completely flushed in rare occasions)
- default window size is same for compression and decompression
(it's now sufficient to set MAX_WBITS in zconf.h).
(it's now sufficient to set MAX_WBITS in zconf.h)
- voidp -> voidpf and voidnp -> voidp (for consistency with other
typedefs and because voidnp was not near in large model).
typedefs and because voidnp was not near in large model)
Changes in 0.94 (13 Aug 95)
- support MSDOS medium model
......@@ -1405,12 +1468,12 @@ Changes in 0.94 (13 Aug 95)
- added support for VMS
- allow a compression level in gzopen()
- gzflush now calls fflush
- For deflate with flush, flush even if no more input is provided.
- For deflate with flush, flush even if no more input is provided
- rename libgz.a as libz.a
- avoid complex expression in infcodes.c triggering Turbo C bug
- work around a problem with gcc on Alpha (in INSERT_STRING)
- don't use inline functions (problem with some gcc versions)
- allow renaming of Byte, uInt, etc... with #define.
- allow renaming of Byte, uInt, etc... with #define
- avoid warning about (unused) pointer before start of array in deflate.c
- avoid various warnings in gzio.c, example.c, infblock.c, adler32.c, zutil.c
- avoid reserved word 'new' in trees.c
......@@ -1429,7 +1492,7 @@ Changes in 0.92 (3 May 95)
- no memcpy on Pyramid
- suppressed inftest.c
- optimized fill_window, put longest_match inline for gcc
- optimized inflate on stored blocks.
- optimized inflate on stored blocks
- untabify all sources to simplify patches
Changes in 0.91 (2 May 95)
......@@ -1447,7 +1510,7 @@ Changes in 0.9 (1 May 95)
- let again gzread copy uncompressed data unchanged (was working in 0.71)
- deflate(Z_FULL_FLUSH), inflateReset and inflateSync are now fully implemented
- added a test of inflateSync in example.c
- moved MAX_WBITS to zconf.h because users might want to change that.
- moved MAX_WBITS to zconf.h because users might want to change that
- document explicitly that zalloc(64K) on MSDOS must return a normalized
pointer (zero offset)
- added Makefiles for Microsoft C, Turbo C, Borland C++
......@@ -1456,7 +1519,7 @@ Changes in 0.9 (1 May 95)
Changes in 0.8 (29 April 95)
- added fast inflate (inffast.c)
- deflate(Z_FINISH) now returns Z_STREAM_END when done. Warning: this
is incompatible with previous versions of zlib which returned Z_OK.
is incompatible with previous versions of zlib which returned Z_OK
- work around a TurboC compiler bug (bad code for b << 0, see infutil.h)
(actually that was not a compiler bug, see 0.81 above)
- gzread no longer reads one extra byte in certain cases
......@@ -1466,50 +1529,50 @@ Changes in 0.8 (29 April 95)
Changes in 0.71 (14 April 95)
- Fixed more MSDOS compilation problems :( There is still a bug with
TurboC large model.
TurboC large model
Changes in 0.7 (14 April 95)
- Added full inflate support.
- Added full inflate support
- Simplified the crc32() interface. The pre- and post-conditioning
(one's complement) is now done inside crc32(). WARNING: this is
incompatible with previous versions; see zlib.h for the new usage.
incompatible with previous versions; see zlib.h for the new usage
Changes in 0.61 (12 April 95)
- workaround for a bug in TurboC. example and minigzip now work on MSDOS.
- workaround for a bug in TurboC. example and minigzip now work on MSDOS
Changes in 0.6 (11 April 95)
- added minigzip.c
- added gzdopen to reopen a file descriptor as gzFile
- added transparent reading of non-gziped files in gzread.
- added transparent reading of non-gziped files in gzread
- fixed bug in gzread (don't read crc as data)
- fixed bug in destroy (gzio.c) (don't return Z_STREAM_END for gzclose).
- fixed bug in destroy (gzio.c) (don't return Z_STREAM_END for gzclose)
- don't allocate big arrays in the stack (for MSDOS)
- fix some MSDOS compilation problems
Changes in 0.5:
- do real compression in deflate.c. Z_PARTIAL_FLUSH is supported but
not yet Z_FULL_FLUSH.
not yet Z_FULL_FLUSH
- support decompression but only in a single step (forced Z_FINISH)
- added opaque object for zalloc and zfree.
- added opaque object for zalloc and zfree
- added deflateReset and inflateReset
- added a variable zlib_version for consistency checking.
- renamed the 'filter' parameter of deflateInit2 as 'strategy'.
Added Z_FILTERED and Z_HUFFMAN_ONLY constants.
- added a variable zlib_version for consistency checking
- renamed the 'filter' parameter of deflateInit2 as 'strategy'
Added Z_FILTERED and Z_HUFFMAN_ONLY constants
Changes in 0.4:
- avoid "zip" everywhere, use zlib instead of ziplib.
- avoid "zip" everywhere, use zlib instead of ziplib
- suppress Z_BLOCK_FLUSH, interpret Z_PARTIAL_FLUSH as block flush
if compression method == 8.
if compression method == 8
- added adler32 and crc32
- renamed deflateOptions as deflateInit2, call one or the other but not both
- added the method parameter for deflateInit2.
- added the method parameter for deflateInit2
- added inflateInit2
- simplied considerably deflateInit and inflateInit by not supporting
user-provided history buffer. This is supported only in deflateInit2
and inflateInit2.
and inflateInit2
Changes in 0.3:
- prefix all macro names with Z_
- use Z_FINISH instead of deflateEnd to finish compression.
- use Z_FINISH instead of deflateEnd to finish compression
- added Z_HUFFMAN_ONLY
- added gzerror()
LICENSE
浏览文件 @ b253b171
version 1.2.11, January 15th, 2017
version 1.2.12, March 28th, 2022
Copyright (C) 1995-2017 Jean-loup Gailly and Mark Adler
Copyright (C) 1995-2022 Jean-loup Gailly and Mark Adler
This software is provided 'as-is', without any express or implied
warranty. In no event will the authors be held liable for any damages
......
Makefile.in
浏览文件 @ b253b171
......@@ -32,7 +32,7 @@ CPP=$(CC) -E
STATICLIB=libz.a
SHAREDLIB=libz.so
SHAREDLIBV=libz.so.1.2.11
SHAREDLIBV=libz.so.1.2.12
SHAREDLIBM=libz.so.1
LIBS=$(STATICLIB) $(SHAREDLIBV)
......@@ -91,8 +91,8 @@ teststatic: static
echo ' *** zlib test OK ***'; \
else \
echo ' *** zlib test FAILED ***'; false; \
fi; \
rm -f $$TMPST
fi
@rm -f tmpst_$$
testshared: shared
@LD_LIBRARY_PATH=`pwd`:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
......@@ -104,8 +104,8 @@ testshared: shared
echo ' *** zlib shared test OK ***'; \
else \
echo ' *** zlib shared test FAILED ***'; false; \
fi; \
rm -f $$TMPSH
fi
@rm -f tmpsh_$$
test64: all64
@TMP64=tmp64_$$; \
......@@ -113,8 +113,8 @@ test64: all64
echo ' *** zlib 64-bit test OK ***'; \
else \
echo ' *** zlib 64-bit test FAILED ***'; false; \
fi; \
rm -f $$TMP64
fi
@rm -f tmp64_$$
infcover.o: $(SRCDIR)test/infcover.c $(SRCDIR)zlib.h zconf.h
$(CC) $(CFLAGS) $(ZINCOUT) -c -o $@ $(SRCDIR)test/infcover.c
......@@ -376,15 +376,13 @@ clean:
rm -f contrib/infback9/*.gcda contrib/infback9/*.gcno contrib/infback9/*.gcov
maintainer-clean: distclean
distclean: clean zconf zconf.h.cmakein docs
distclean: clean zconf zconf.h.cmakein
rm -f Makefile zlib.pc configure.log
-@rm -f .DS_Store
@if [ -f Makefile.in ]; then \
printf 'all:\n\t-@echo "Please use ./configure first. Thank you."\n' > Makefile ; \
printf '\ndistclean:\n\tmake -f Makefile.in distclean\n' >> Makefile ; \
touch -r $(SRCDIR)Makefile.in Makefile ; fi
@if [ ! -f zconf.h.in ]; then rm -f zconf.h zconf.h.cmakein ; fi
@if [ ! -f zlib.3 ]; then rm -f zlib.3.pdf ; fi
tags:
etags $(SRCDIR)*.[ch]
......
OAT.xml
浏览文件 @ b253b171
......@@ -81,19 +81,16 @@ Note:If the text contains special characters, please escape them according to th
<filefilterlist>
<filefilter name="defaultFilter" desc="Files not to check">
<filteritem type="filepath" name="contrib/ada " desc="not used in ohos "/>
<filteritem type="filepath" name="contrib/asm686 " desc="not used in ohos "/>
<filteritem type="filepath" name="contrib/pascal " desc="not used in ohos "/>
<filteritem type="filepath" name="contrib/puff " desc="not used in ohos "/>
<filteritem type="filepath" name="contrib/blast " desc="not used in ohos "/>
<filteritem type="filepath" name="contrib/masmx64 " desc="not used in ohos "/>
<filteritem type="filepath" name="contrib/gcc_gvmat64 " desc="not used in ohos "/>
<filteritem type="filepath" name="contrib/iostream2 " desc="not used in ohos "/>
<filteritem type="filepath" name="examples " desc="not used in ohos "/>
<filteritem type="filepath" name="contrib/masmx86 " desc="not used in ohos "/>
<filteritem type="filepath" name="contrib/dotzlib " desc="not used in ohos "/>
<filteritem type="filepath" name="FAQ " desc="not used in ohos "/>
<filteritem type="filename" name="*.pdf" desc="not used in ohos "/>
</filefilter>
</filefilterlist>
</oatconfig>
</configuration>
\ No newline at end of file
</configuration>
README
浏览文件 @ b253b171
ZLIB DATA COMPRESSION LIBRARY
zlib 1.2.11 is a general purpose data compression library. All the code is
zlib 1.2.12 is a general purpose data compression library. All the code is
thread safe. The data format used by the zlib library is described by RFCs
(Request for Comments) 1950 to 1952 in the files
http://tools.ietf.org/html/rfc1950 (zlib format), rfc1951 (deflate format) and
......@@ -31,7 +31,7 @@ Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan. 1997
issue of Dr. Dobb's Journal; a copy of the article is available at
http://marknelson.us/1997/01/01/zlib-engine/ .
The changes made in version 1.2.11 are documented in the file ChangeLog.
The changes made in version 1.2.12 are documented in the file ChangeLog.
Unsupported third party contributions are provided in directory contrib/ .
......@@ -84,7 +84,7 @@ Acknowledgments:
Copyright notice:
(C) 1995-2017 Jean-loup Gailly and Mark Adler
(C) 1995-2022 Jean-loup Gailly and Mark Adler
This software is provided 'as-is', without any express or implied
warranty. In no event will the authors be held liable for any damages
......@@ -108,7 +108,10 @@ Copyright notice:
If you use the zlib library in a product, we would appreciate *not* receiving
lengthy legal documents to sign. The sources are provided for free but without
warranty of any kind. The library has been entirely written by Jean-loup
Gailly and Mark Adler; it does not include third-party code.
Gailly and Mark Adler; it does not include third-party code. We make all
contributions to and distributions of this project solely in our personal
capacity, and are not conveying any rights to any intellectual property of
any third parties.
If you redistribute modified sources, we would appreciate that you include in
the file ChangeLog history information documenting your changes. Please read
......
README.OpenSource
浏览文件 @ b253b171
......@@ -3,9 +3,9 @@
"Name" : "zlib",
"License" : "zlib/libpng License",
"License File" : "LICENSE",
"Version Number" : "1.2.11",
"Version Number" : "1.2.12",
"Owner" : "gongjunsong@huawei.com",
"Upstream URL" : "https://github.com/madler/zlib/archive/v1.2.11.zip",
"Description" : "zlib 1.2.11 is a general purpose data compression library. All the code is thread safe. The data format used by the zlib library is described by RFCs (Request for Comments) 1950 to 1952 in the files"
"Upstream URL" : "https://github.com/madler/zlib/archive/refs/tags/v1.2.12.tar.gz",
"Description" : "zlib 1.2.12 is a general purpose data compression library. All the code is thread safe. The data format used by the zlib library is described by RFCs (Request for Comments) 1950 to 1952 in the files"
}
]
bundle.json
浏览文件 @ b253b171
{
"name": "@ohos/zlib",
"description": "zlib 1.2.11 is a general purpose data compression library. All the code is thread safe. The data format used by the zlib library is described by RFCs (Request for Comments) 1950 to 1952 in the files",
"description": "zlib 1.2.12 is a general purpose data compression library. All the code is thread safe. The data format used by the zlib library is described by RFCs (Request for Comments) 1950 to 1952 in the files",
"version": "3.1",
"license": "Zlib LICENSE",
"publishAs": "code-segment",
......@@ -30,4 +30,4 @@
"test": []
}
}
}
\ No newline at end of file
}
configure
浏览文件 @ b253b171
......@@ -87,6 +87,7 @@ build64=0
gcc=0
warn=0
debug=0
sanitize=0
old_cc="$CC"
old_cflags="$CFLAGS"
OBJC='$(OBJZ) $(OBJG)'
......@@ -137,6 +138,7 @@ case "$1" in
-c* | --const) zconst=1; shift ;;
-w* | --warn) warn=1; shift ;;
-d* | --debug) debug=1; shift ;;
--sanitize) sanitize=1; shift ;;
*)
echo "unknown option: $1" | tee -a configure.log
echo "$0 --help for help" | tee -a configure.log
......@@ -165,8 +167,14 @@ extern int getchar();
int hello() {return getchar();}
EOF
test -z "$CC" && echo Checking for ${CROSS_PREFIX}gcc... | tee -a configure.log
cc=${CC-${CROSS_PREFIX}gcc}
if test -z "$CC"; then
echo Checking for ${CROSS_PREFIX}gcc... | tee -a configure.log
if ${CROSS_PREFIX}gcc -v >/dev/null 2>&1; then
cc=${CROSS_PREFIX}gcc
else
cc=${CROSS_PREFIX}cc
fi
fi
cflags=${CFLAGS-"-O3"}
# to force the asm version use: CFLAGS="-O3 -DASMV" ./configure
case "$cc" in
......@@ -199,6 +207,9 @@ if test "$gcc" -eq 1 && ($cc -c $test.c) >> configure.log 2>&1; then
CFLAGS="${CFLAGS} -Wall -Wextra -pedantic"
fi
fi
if test $sanitize -eq 1; then
CFLAGS="${CFLAGS} -fsanitize=address"
fi
if test $debug -eq 1; then
CFLAGS="${CFLAGS} -DZLIB_DEBUG"
SFLAGS="${SFLAGS} -DZLIB_DEBUG"
......@@ -367,8 +378,11 @@ else
try()
{
show $*
( $* ) >> configure.log 2>&1
got=`( $* ) 2>&1`
ret=$?
if test "$got" != ""; then
printf "%s\n" "$got" >> configure.log
fi
if test $ret -ne 0; then
echo "(exit code "$ret")" >> configure.log
fi
......@@ -381,8 +395,11 @@ tryboth()
show $*
got=`( $* ) 2>&1`
ret=$?
printf %s "$got" >> configure.log
if test "$got" != ""; then
printf "%s\n" "$got" >> configure.log
fi
if test $ret -ne 0; then
echo "(exit code "$ret")" >> configure.log
return $ret
fi
test "$got" = ""
......@@ -457,17 +474,11 @@ size_t dummy = 0;
EOF
if try $CC -c $CFLAGS $test.c; then
echo "Checking for size_t... Yes." | tee -a configure.log
need_sizet=0
else
echo "Checking for size_t... No." | tee -a configure.log
need_sizet=1
fi
echo >> configure.log
# find the size_t integer type, if needed
if test $need_sizet -eq 1; then
cat > $test.c <<EOF
# find a size_t integer type
# check for long long
cat > $test.c << EOF
long long dummy = 0;
EOF
if try $CC -c $CFLAGS $test.c; then
......@@ -495,17 +506,13 @@ EOF
if try $CC $CFLAGS -o $test $test.c; then
sizet=`./$test`
echo "Checking for a pointer-size integer type..." $sizet"." | tee -a configure.log
CFLAGS="${CFLAGS} -DNO_SIZE_T=${sizet}"
SFLAGS="${SFLAGS} -DNO_SIZE_T=${sizet}"
else
echo "Failed to find a pointer-size integer type." | tee -a configure.log
leave 1
echo "Checking for a pointer-size integer type... not found." | tee -a configure.log
fi
fi
if test $need_sizet -eq 1; then
CFLAGS="${CFLAGS} -DNO_SIZE_T=${sizet}"
SFLAGS="${SFLAGS} -DNO_SIZE_T=${sizet}"
fi
echo >> configure.log
# check for large file support, and if none, check for fseeko()
......@@ -849,7 +856,6 @@ echo SHAREDLIBV = $SHAREDLIBV >> configure.log
echo STATICLIB = $STATICLIB >> configure.log
echo TEST = $TEST >> configure.log
echo VER = $VER >> configure.log
echo Z_U4 = $Z_U4 >> configure.log
echo SRCDIR = $SRCDIR >> configure.log
echo exec_prefix = $exec_prefix >> configure.log
echo includedir = $includedir >> configure.log
......
contrib/README.contrib
浏览文件 @ b253b171
......@@ -8,14 +8,6 @@ ada/ by Dmitriy Anisimkov <anisimkov@yahoo.com>
Support for Ada
See http://zlib-ada.sourceforge.net/
amd64/ by Mikhail Teterin <mi@ALDAN.algebra.com>
asm code for AMD64
See patch at http://www.freebsd.org/cgi/query-pr.cgi?pr=bin/96393
asm686/ by Brian Raiter <breadbox@muppetlabs.com>
asm code for Pentium and PPro/PII, using the AT&T (GNU as) syntax
See http://www.muppetlabs.com/~breadbox/software/assembly.html
blast/ by Mark Adler <madler@alumni.caltech.edu>
Decompressor for output of PKWare Data Compression Library (DCL)
......@@ -32,9 +24,6 @@ gcc_gvmat64/by Gilles Vollant <info@winimage.com>
infback9/ by Mark Adler <madler@alumni.caltech.edu>
Unsupported diffs to infback to decode the deflate64 format
inflate86/ by Chris Anderson <christop@charm.net>
Tuned x86 gcc asm code to replace inflate_fast()
iostream/ by Kevin Ruland <kevin@rodin.wustl.edu>
A C++ I/O streams interface to the zlib gz* functions
......@@ -45,16 +34,6 @@ iostream3/ by Ludwig Schwardt <schwardt@sun.ac.za>
and Kevin Ruland <kevin@rodin.wustl.edu>
Yet another C++ I/O streams interface
masmx64/ by Gilles Vollant <info@winimage.com>
x86 64-bit (AMD64 and Intel EM64t) code for x64 assembler to
replace longest_match() and inflate_fast(), also masm x86
64-bits translation of Chris Anderson inflate_fast()
masmx86/ by Gilles Vollant <info@winimage.com>
x86 asm code to replace longest_match() and inflate_fast(),
for Visual C++ and MASM (32 bits).
Based on Brian Raiter (asm686) and Chris Anderson (inflate86)
minizip/ by Gilles Vollant <info@winimage.com>
Mini zip and unzip based on zlib
Includes Zip64 support by Mathias Svensson <mathias@result42.com>
......
contrib/amd64/amd64-match.S 已删除 100644 → 0
浏览文件 @ 5ee30652
/*
* match.S -- optimized version of longest_match()
* based on the similar work by Gilles Vollant, and Brian Raiter, written 1998
*
* This is free software; you can redistribute it and/or modify it
* under the terms of the BSD License. Use by owners of Che Guevarra
* parafernalia is prohibited, where possible, and highly discouraged
* elsewhere.
*/
#ifndef NO_UNDERLINE
# define match_init _match_init
# define longest_match _longest_match
#endif
#define scanend ebx
#define scanendw bx
#define chainlenwmask edx /* high word: current chain len low word: s->wmask */
#define curmatch rsi
#define curmatchd esi
#define windowbestlen r8
#define scanalign r9
#define scanalignd r9d
#define window r10
#define bestlen r11
#define bestlend r11d
#define scanstart r12d
#define scanstartw r12w
#define scan r13
#define nicematch r14d
#define limit r15
#define limitd r15d
#define prev rcx
/*
* The 258 is a "magic number, not a parameter -- changing it
* breaks the hell loose
*/
#define MAX_MATCH (258)
#define MIN_MATCH (3)
#define MIN_LOOKAHEAD (MAX_MATCH + MIN_MATCH + 1)
#define MAX_MATCH_8 ((MAX_MATCH + 7) & ~7)
/* stack frame offsets */
#define LocalVarsSize (112)
#define _chainlenwmask ( 8-LocalVarsSize)(%rsp)
#define _windowbestlen (16-LocalVarsSize)(%rsp)
#define save_r14 (24-LocalVarsSize)(%rsp)
#define save_rsi (32-LocalVarsSize)(%rsp)
#define save_rbx (40-LocalVarsSize)(%rsp)
#define save_r12 (56-LocalVarsSize)(%rsp)
#define save_r13 (64-LocalVarsSize)(%rsp)
#define save_r15 (80-LocalVarsSize)(%rsp)
.globl match_init, longest_match
/*
* On AMD64 the first argument of a function (in our case -- the pointer to
* deflate_state structure) is passed in %rdi, hence our offsets below are
* all off of that.
*/
/* you can check the structure offset by running
#include <stdlib.h>
#include <stdio.h>
#include "deflate.h"
void print_depl()
{
deflate_state ds;
deflate_state *s=&ds;
printf("size pointer=%u\n",(int)sizeof(void*));
printf("#define dsWSize (%3u)(%%rdi)\n",(int)(((char*)&(s->w_size))-((char*)s)));
printf("#define dsWMask (%3u)(%%rdi)\n",(int)(((char*)&(s->w_mask))-((char*)s)));
printf("#define dsWindow (%3u)(%%rdi)\n",(int)(((char*)&(s->window))-((char*)s)));
printf("#define dsPrev (%3u)(%%rdi)\n",(int)(((char*)&(s->prev))-((char*)s)));
printf("#define dsMatchLen (%3u)(%%rdi)\n",(int)(((char*)&(s->match_length))-((char*)s)));
printf("#define dsPrevMatch (%3u)(%%rdi)\n",(int)(((char*)&(s->prev_match))-((char*)s)));
printf("#define dsStrStart (%3u)(%%rdi)\n",(int)(((char*)&(s->strstart))-((char*)s)));
printf("#define dsMatchStart (%3u)(%%rdi)\n",(int)(((char*)&(s->match_start))-((char*)s)));
printf("#define dsLookahead (%3u)(%%rdi)\n",(int)(((char*)&(s->lookahead))-((char*)s)));
printf("#define dsPrevLen (%3u)(%%rdi)\n",(int)(((char*)&(s->prev_length))-((char*)s)));
printf("#define dsMaxChainLen (%3u)(%%rdi)\n",(int)(((char*)&(s->max_chain_length))-((char*)s)));
printf("#define dsGoodMatch (%3u)(%%rdi)\n",(int)(((char*)&(s->good_match))-((char*)s)));
printf("#define dsNiceMatch (%3u)(%%rdi)\n",(int)(((char*)&(s->nice_match))-((char*)s)));
}
*/
/*
to compile for XCode 3.2 on MacOSX x86_64
- run "gcc -g -c -DXCODE_MAC_X64_STRUCTURE amd64-match.S"
*/
#ifndef CURRENT_LINX_XCODE_MAC_X64_STRUCTURE
#define dsWSize ( 68)(%rdi)
#define dsWMask ( 76)(%rdi)
#define dsWindow ( 80)(%rdi)
#define dsPrev ( 96)(%rdi)
#define dsMatchLen (144)(%rdi)
#define dsPrevMatch (148)(%rdi)
#define dsStrStart (156)(%rdi)
#define dsMatchStart (160)(%rdi)
#define dsLookahead (164)(%rdi)
#define dsPrevLen (168)(%rdi)
#define dsMaxChainLen (172)(%rdi)
#define dsGoodMatch (188)(%rdi)
#define dsNiceMatch (192)(%rdi)
#else
#ifndef STRUCT_OFFSET
# define STRUCT_OFFSET (0)
#endif
#define dsWSize ( 56 + STRUCT_OFFSET)(%rdi)
#define dsWMask ( 64 + STRUCT_OFFSET)(%rdi)
#define dsWindow ( 72 + STRUCT_OFFSET)(%rdi)
#define dsPrev ( 88 + STRUCT_OFFSET)(%rdi)
#define dsMatchLen (136 + STRUCT_OFFSET)(%rdi)
#define dsPrevMatch (140 + STRUCT_OFFSET)(%rdi)
#define dsStrStart (148 + STRUCT_OFFSET)(%rdi)
#define dsMatchStart (152 + STRUCT_OFFSET)(%rdi)
#define dsLookahead (156 + STRUCT_OFFSET)(%rdi)
#define dsPrevLen (160 + STRUCT_OFFSET)(%rdi)
#define dsMaxChainLen (164 + STRUCT_OFFSET)(%rdi)
#define dsGoodMatch (180 + STRUCT_OFFSET)(%rdi)
#define dsNiceMatch (184 + STRUCT_OFFSET)(%rdi)
#endif
.text
/* uInt longest_match(deflate_state *deflatestate, IPos curmatch) */
longest_match:
/*
* Retrieve the function arguments. %curmatch will hold cur_match
* throughout the entire function (passed via rsi on amd64).
* rdi will hold the pointer to the deflate_state (first arg on amd64)
*/
mov %rsi, save_rsi
mov %rbx, save_rbx
mov %r12, save_r12
mov %r13, save_r13
mov %r14, save_r14
mov %r15, save_r15
/* uInt wmask = s->w_mask; */
/* unsigned chain_length = s->max_chain_length; */
/* if (s->prev_length >= s->good_match) { */
/* chain_length >>= 2; */
/* } */
movl dsPrevLen, %eax
movl dsGoodMatch, %ebx
cmpl %ebx, %eax
movl dsWMask, %eax
movl dsMaxChainLen, %chainlenwmask
jl LastMatchGood
shrl $2, %chainlenwmask
LastMatchGood:
/* chainlen is decremented once beforehand so that the function can */
/* use the sign flag instead of the zero flag for the exit test. */
/* It is then shifted into the high word, to make room for the wmask */
/* value, which it will always accompany. */
decl %chainlenwmask
shll $16, %chainlenwmask
orl %eax, %chainlenwmask
/* if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead; */
movl dsNiceMatch, %eax
movl dsLookahead, %ebx
cmpl %eax, %ebx
jl LookaheadLess
movl %eax, %ebx
LookaheadLess: movl %ebx, %nicematch
/* register Bytef *scan = s->window + s->strstart; */
mov dsWindow, %window
movl dsStrStart, %limitd
lea (%limit, %window), %scan
/* Determine how many bytes the scan ptr is off from being */
/* dword-aligned. */
mov %scan, %scanalign
negl %scanalignd
andl $3, %scanalignd
/* IPos limit = s->strstart > (IPos)MAX_DIST(s) ? */
/* s->strstart - (IPos)MAX_DIST(s) : NIL; */
movl dsWSize, %eax
subl $MIN_LOOKAHEAD, %eax
xorl %ecx, %ecx
subl %eax, %limitd
cmovng %ecx, %limitd
/* int best_len = s->prev_length; */
movl dsPrevLen, %bestlend
/* Store the sum of s->window + best_len in %windowbestlen locally, and in memory. */
lea (%window, %bestlen), %windowbestlen
mov %windowbestlen, _windowbestlen
/* register ush scan_start = *(ushf*)scan; */
/* register ush scan_end = *(ushf*)(scan+best_len-1); */
/* Posf *prev = s->prev; */
movzwl (%scan), %scanstart
movzwl -1(%scan, %bestlen), %scanend
mov dsPrev, %prev
/* Jump into the main loop. */
movl %chainlenwmask, _chainlenwmask
jmp LoopEntry
.balign 16
/* do {
* match = s->window + cur_match;
* if (*(ushf*)(match+best_len-1) != scan_end ||
* *(ushf*)match != scan_start) continue;
* [...]
* } while ((cur_match = prev[cur_match & wmask]) > limit
* && --chain_length != 0);
*
* Here is the inner loop of the function. The function will spend the
* majority of its time in this loop, and majority of that time will
* be spent in the first ten instructions.
*/
LookupLoop:
andl %chainlenwmask, %curmatchd
movzwl (%prev, %curmatch, 2), %curmatchd
cmpl %limitd, %curmatchd
jbe LeaveNow
subl $0x00010000, %chainlenwmask
js LeaveNow
LoopEntry: cmpw -1(%windowbestlen, %curmatch), %scanendw
jne LookupLoop
cmpw %scanstartw, (%window, %curmatch)
jne LookupLoop
/* Store the current value of chainlen. */
movl %chainlenwmask, _chainlenwmask
/* %scan is the string under scrutiny, and %prev to the string we */
/* are hoping to match it up with. In actuality, %esi and %edi are */
/* both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and %edx is */
/* initialized to -(MAX_MATCH_8 - scanalign). */
mov $(-MAX_MATCH_8), %rdx
lea (%curmatch, %window), %windowbestlen
lea MAX_MATCH_8(%windowbestlen, %scanalign), %windowbestlen
lea MAX_MATCH_8(%scan, %scanalign), %prev
/* the prefetching below makes very little difference... */
prefetcht1 (%windowbestlen, %rdx)
prefetcht1 (%prev, %rdx)
/*
* Test the strings for equality, 8 bytes at a time. At the end,
* adjust %rdx so that it is offset to the exact byte that mismatched.
*
* It should be confessed that this loop usually does not represent
* much of the total running time. Replacing it with a more
* straightforward "rep cmpsb" would not drastically degrade
* performance -- unrolling it, for example, makes no difference.
*/
#undef USE_SSE /* works, but is 6-7% slower, than non-SSE... */
LoopCmps:
#ifdef USE_SSE
/* Preload the SSE registers */
movdqu (%windowbestlen, %rdx), %xmm1
movdqu (%prev, %rdx), %xmm2
pcmpeqb %xmm2, %xmm1
movdqu 16(%windowbestlen, %rdx), %xmm3
movdqu 16(%prev, %rdx), %xmm4
pcmpeqb %xmm4, %xmm3
movdqu 32(%windowbestlen, %rdx), %xmm5
movdqu 32(%prev, %rdx), %xmm6
pcmpeqb %xmm6, %xmm5
movdqu 48(%windowbestlen, %rdx), %xmm7
movdqu 48(%prev, %rdx), %xmm8
pcmpeqb %xmm8, %xmm7
/* Check the comparisions' results */
pmovmskb %xmm1, %rax
notw %ax
bsfw %ax, %ax
jnz LeaveLoopCmps
/* this is the only iteration of the loop with a possibility of having
incremented rdx by 0x108 (each loop iteration add 16*4 = 0x40
and (0x40*4)+8=0x108 */
add $8, %rdx
jz LenMaximum
add $8, %rdx
pmovmskb %xmm3, %rax
notw %ax
bsfw %ax, %ax
jnz LeaveLoopCmps
add $16, %rdx
pmovmskb %xmm5, %rax
notw %ax
bsfw %ax, %ax
jnz LeaveLoopCmps
add $16, %rdx
pmovmskb %xmm7, %rax
notw %ax
bsfw %ax, %ax
jnz LeaveLoopCmps
add $16, %rdx
jmp LoopCmps
LeaveLoopCmps: add %rax, %rdx
#else
mov (%windowbestlen, %rdx), %rax
xor (%prev, %rdx), %rax
jnz LeaveLoopCmps
mov 8(%windowbestlen, %rdx), %rax
xor 8(%prev, %rdx), %rax
jnz LeaveLoopCmps8
mov 16(%windowbestlen, %rdx), %rax
xor 16(%prev, %rdx), %rax
jnz LeaveLoopCmps16
add $24, %rdx
jnz LoopCmps
jmp LenMaximum
# if 0
/*
* This three-liner is tantalizingly simple, but bsf is a slow instruction,
* and the complicated alternative down below is quite a bit faster. Sad...
*/
LeaveLoopCmps: bsf %rax, %rax /* find the first non-zero bit */
shrl $3, %eax /* divide by 8 to get the byte */
add %rax, %rdx
# else
LeaveLoopCmps16:
add $8, %rdx
LeaveLoopCmps8:
add $8, %rdx
LeaveLoopCmps: testl $0xFFFFFFFF, %eax /* Check the first 4 bytes */
jnz Check16
add $4, %rdx
shr $32, %rax
Check16: testw $0xFFFF, %ax
jnz LenLower
add $2, %rdx
shrl $16, %eax
LenLower: subb $1, %al
adc $0, %rdx
# endif
#endif
/* Calculate the length of the match. If it is longer than MAX_MATCH, */
/* then automatically accept it as the best possible match and leave. */
lea (%prev, %rdx), %rax
sub %scan, %rax
cmpl $MAX_MATCH, %eax
jge LenMaximum
/* If the length of the match is not longer than the best match we */
/* have so far, then forget it and return to the lookup loop. */
cmpl %bestlend, %eax
jg LongerMatch
mov _windowbestlen, %windowbestlen
mov dsPrev, %prev
movl _chainlenwmask, %edx
jmp LookupLoop
/* s->match_start = cur_match; */
/* best_len = len; */
/* if (len >= nice_match) break; */
/* scan_end = *(ushf*)(scan+best_len-1); */
LongerMatch:
movl %eax, %bestlend
movl %curmatchd, dsMatchStart
cmpl %nicematch, %eax
jge LeaveNow
lea (%window, %bestlen), %windowbestlen
mov %windowbestlen, _windowbestlen
movzwl -1(%scan, %rax), %scanend
mov dsPrev, %prev
movl _chainlenwmask, %chainlenwmask
jmp LookupLoop
/* Accept the current string, with the maximum possible length. */
LenMaximum:
movl $MAX_MATCH, %bestlend
movl %curmatchd, dsMatchStart
/* if ((uInt)best_len <= s->lookahead) return (uInt)best_len; */
/* return s->lookahead; */
LeaveNow:
movl dsLookahead, %eax
cmpl %eax, %bestlend
cmovngl %bestlend, %eax
LookaheadRet:
/* Restore the registers and return from whence we came. */
mov save_rsi, %rsi
mov save_rbx, %rbx
mov save_r12, %r12
mov save_r13, %r13
mov save_r14, %r14
mov save_r15, %r15
ret
match_init: ret
contrib/asm686/README.686 已删除 100644 → 0
浏览文件 @ 5ee30652
This is a patched version of zlib, modified to use
Pentium-Pro-optimized assembly code in the deflation algorithm. The
files changed/added by this patch are:
README.686
match.S
The speedup that this patch provides varies, depending on whether the
compiler used to build the original version of zlib falls afoul of the
PPro's speed traps. My own tests show a speedup of around 10-20% at
the default compression level, and 20-30% using -9, against a version
compiled using gcc 2.7.2.3. Your mileage may vary.
Note that this code has been tailored for the PPro/PII in particular,
and will not perform particuarly well on a Pentium.
If you are using an assembler other than GNU as, you will have to
translate match.S to use your assembler's syntax. (Have fun.)
Brian Raiter
breadbox@muppetlabs.com
April, 1998
Added for zlib 1.1.3:
The patches come from
http://www.muppetlabs.com/~breadbox/software/assembly.html
To compile zlib with this asm file, copy match.S to the zlib directory
then do:
CFLAGS="-O3 -DASMV" ./configure
make OBJA=match.o
Update:
I've been ignoring these assembly routines for years, believing that
gcc's generated code had caught up with it sometime around gcc 2.95
and the major rearchitecting of the Pentium 4. However, I recently
learned that, despite what I believed, this code still has some life
in it. On the Pentium 4 and AMD64 chips, it continues to run about 8%
faster than the code produced by gcc 4.1.
In acknowledgement of its continuing usefulness, I've altered the
license to match that of the rest of zlib. Share and Enjoy!
Brian Raiter
breadbox@muppetlabs.com
April, 2007
contrib/asm686/match.S 已删除 100644 → 0
浏览文件 @ 5ee30652
/* match.S -- x86 assembly version of the zlib longest_match() function.
* Optimized for the Intel 686 chips (PPro and later).
*
* Copyright (C) 1998, 2007 Brian Raiter <breadbox@muppetlabs.com>
*
* This software is provided 'as-is', without any express or implied
* warranty. In no event will the author be held liable for any damages
* arising from the use of this software.
*
* Permission is granted to anyone to use this software for any purpose,
* including commercial applications, and to alter it and redistribute it
* freely, subject to the following restrictions:
*
* 1. The origin of this software must not be misrepresented; you must not
* claim that you wrote the original software. If you use this software
* in a product, an acknowledgment in the product documentation would be
* appreciated but is not required.
* 2. Altered source versions must be plainly marked as such, and must not be
* misrepresented as being the original software.
* 3. This notice may not be removed or altered from any source distribution.
*/
#ifndef NO_UNDERLINE
#define match_init _match_init
#define longest_match _longest_match
#endif
#define MAX_MATCH (258)
#define MIN_MATCH (3)
#define MIN_LOOKAHEAD (MAX_MATCH + MIN_MATCH + 1)
#define MAX_MATCH_8 ((MAX_MATCH + 7) & ~7)
/* stack frame offsets */
#define chainlenwmask 0 /* high word: current chain len */
/* low word: s->wmask */
#define window 4 /* local copy of s->window */
#define windowbestlen 8 /* s->window + bestlen */
#define scanstart 16 /* first two bytes of string */
#define scanend 12 /* last two bytes of string */
#define scanalign 20 /* dword-misalignment of string */
#define nicematch 24 /* a good enough match size */
#define bestlen 28 /* size of best match so far */
#define scan 32 /* ptr to string wanting match */
#define LocalVarsSize (36)
/* saved ebx 36 */
/* saved edi 40 */
/* saved esi 44 */
/* saved ebp 48 */
/* return address 52 */
#define deflatestate 56 /* the function arguments */
#define curmatch 60
/* All the +zlib1222add offsets are due to the addition of fields
* in zlib in the deflate_state structure since the asm code was first written
* (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
* (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
* if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
*/
#define zlib1222add (8)
#define dsWSize (36+zlib1222add)
#define dsWMask (44+zlib1222add)
#define dsWindow (48+zlib1222add)
#define dsPrev (56+zlib1222add)
#define dsMatchLen (88+zlib1222add)
#define dsPrevMatch (92+zlib1222add)
#define dsStrStart (100+zlib1222add)
#define dsMatchStart (104+zlib1222add)
#define dsLookahead (108+zlib1222add)
#define dsPrevLen (112+zlib1222add)
#define dsMaxChainLen (116+zlib1222add)
#define dsGoodMatch (132+zlib1222add)
#define dsNiceMatch (136+zlib1222add)
.file "match.S"
.globl match_init, longest_match
.text
/* uInt longest_match(deflate_state *deflatestate, IPos curmatch) */
.cfi_sections .debug_frame
longest_match:
.cfi_startproc
/* Save registers that the compiler may be using, and adjust %esp to */
/* make room for our stack frame. */
pushl %ebp
.cfi_def_cfa_offset 8
.cfi_offset ebp, -8
pushl %edi
.cfi_def_cfa_offset 12
pushl %esi
.cfi_def_cfa_offset 16
pushl %ebx
.cfi_def_cfa_offset 20
subl $LocalVarsSize, %esp
.cfi_def_cfa_offset LocalVarsSize+20
/* Retrieve the function arguments. %ecx will hold cur_match */
/* throughout the entire function. %edx will hold the pointer to the */
/* deflate_state structure during the function's setup (before */
/* entering the main loop). */
movl deflatestate(%esp), %edx
movl curmatch(%esp), %ecx
/* uInt wmask = s->w_mask; */
/* unsigned chain_length = s->max_chain_length; */
/* if (s->prev_length >= s->good_match) { */
/* chain_length >>= 2; */
/* } */
movl dsPrevLen(%edx), %eax
movl dsGoodMatch(%edx), %ebx
cmpl %ebx, %eax
movl dsWMask(%edx), %eax
movl dsMaxChainLen(%edx), %ebx
jl LastMatchGood
shrl $2, %ebx
LastMatchGood:
/* chainlen is decremented once beforehand so that the function can */
/* use the sign flag instead of the zero flag for the exit test. */
/* It is then shifted into the high word, to make room for the wmask */
/* value, which it will always accompany. */
decl %ebx
shll $16, %ebx
orl %eax, %ebx
movl %ebx, chainlenwmask(%esp)
/* if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead; */
movl dsNiceMatch(%edx), %eax
movl dsLookahead(%edx), %ebx
cmpl %eax, %ebx
jl LookaheadLess
movl %eax, %ebx
LookaheadLess: movl %ebx, nicematch(%esp)
/* register Bytef *scan = s->window + s->strstart; */
movl dsWindow(%edx), %esi
movl %esi, window(%esp)
movl dsStrStart(%edx), %ebp
lea (%esi,%ebp), %edi
movl %edi, scan(%esp)
/* Determine how many bytes the scan ptr is off from being */
/* dword-aligned. */
movl %edi, %eax
negl %eax
andl $3, %eax
movl %eax, scanalign(%esp)
/* IPos limit = s->strstart > (IPos)MAX_DIST(s) ? */
/* s->strstart - (IPos)MAX_DIST(s) : NIL; */
movl dsWSize(%edx), %eax
subl $MIN_LOOKAHEAD, %eax
subl %eax, %ebp
jg LimitPositive
xorl %ebp, %ebp
LimitPositive:
/* int best_len = s->prev_length; */
movl dsPrevLen(%edx), %eax
movl %eax, bestlen(%esp)
/* Store the sum of s->window + best_len in %esi locally, and in %esi. */
addl %eax, %esi
movl %esi, windowbestlen(%esp)
/* register ush scan_start = *(ushf*)scan; */
/* register ush scan_end = *(ushf*)(scan+best_len-1); */
/* Posf *prev = s->prev; */
movzwl (%edi), %ebx
movl %ebx, scanstart(%esp)
movzwl -1(%edi,%eax), %ebx
movl %ebx, scanend(%esp)
movl dsPrev(%edx), %edi
/* Jump into the main loop. */
movl chainlenwmask(%esp), %edx
jmp LoopEntry
.balign 16
/* do {
* match = s->window + cur_match;
* if (*(ushf*)(match+best_len-1) != scan_end ||
* *(ushf*)match != scan_start) continue;
* [...]
* } while ((cur_match = prev[cur_match & wmask]) > limit
* && --chain_length != 0);
*
* Here is the inner loop of the function. The function will spend the
* majority of its time in this loop, and majority of that time will
* be spent in the first ten instructions.
*
* Within this loop:
* %ebx = scanend
* %ecx = curmatch
* %edx = chainlenwmask - i.e., ((chainlen << 16) | wmask)
* %esi = windowbestlen - i.e., (window + bestlen)
* %edi = prev
* %ebp = limit
*/
LookupLoop:
andl %edx, %ecx
movzwl (%edi,%ecx,2), %ecx
cmpl %ebp, %ecx
jbe LeaveNow
subl $0x00010000, %edx
js LeaveNow
LoopEntry: movzwl -1(%esi,%ecx), %eax
cmpl %ebx, %eax
jnz LookupLoop
movl window(%esp), %eax
movzwl (%eax,%ecx), %eax
cmpl scanstart(%esp), %eax
jnz LookupLoop
/* Store the current value of chainlen. */
movl %edx, chainlenwmask(%esp)
/* Point %edi to the string under scrutiny, and %esi to the string we */
/* are hoping to match it up with. In actuality, %esi and %edi are */
/* both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and %edx is */
/* initialized to -(MAX_MATCH_8 - scanalign). */
movl window(%esp), %esi
movl scan(%esp), %edi
addl %ecx, %esi
movl scanalign(%esp), %eax
movl $(-MAX_MATCH_8), %edx
lea MAX_MATCH_8(%edi,%eax), %edi
lea MAX_MATCH_8(%esi,%eax), %esi
/* Test the strings for equality, 8 bytes at a time. At the end,
* adjust %edx so that it is offset to the exact byte that mismatched.
*
* We already know at this point that the first three bytes of the
* strings match each other, and they can be safely passed over before
* starting the compare loop. So what this code does is skip over 0-3
* bytes, as much as necessary in order to dword-align the %edi
* pointer. (%esi will still be misaligned three times out of four.)
*
* It should be confessed that this loop usually does not represent
* much of the total running time. Replacing it with a more
* straightforward "rep cmpsb" would not drastically degrade
* performance.
*/
LoopCmps:
movl (%esi,%edx), %eax
xorl (%edi,%edx), %eax
jnz LeaveLoopCmps
movl 4(%esi,%edx), %eax
xorl 4(%edi,%edx), %eax
jnz LeaveLoopCmps4
addl $8, %edx
jnz LoopCmps
jmp LenMaximum
LeaveLoopCmps4: addl $4, %edx
LeaveLoopCmps: testl $0x0000FFFF, %eax
jnz LenLower
addl $2, %edx
shrl $16, %eax
LenLower: subb $1, %al
adcl $0, %edx
/* Calculate the length of the match. If it is longer than MAX_MATCH, */
/* then automatically accept it as the best possible match and leave. */
lea (%edi,%edx), %eax
movl scan(%esp), %edi
subl %edi, %eax
cmpl $MAX_MATCH, %eax
jge LenMaximum
/* If the length of the match is not longer than the best match we */
/* have so far, then forget it and return to the lookup loop. */
movl deflatestate(%esp), %edx
movl bestlen(%esp), %ebx
cmpl %ebx, %eax
jg LongerMatch
movl windowbestlen(%esp), %esi
movl dsPrev(%edx), %edi
movl scanend(%esp), %ebx
movl chainlenwmask(%esp), %edx
jmp LookupLoop
/* s->match_start = cur_match; */
/* best_len = len; */
/* if (len >= nice_match) break; */
/* scan_end = *(ushf*)(scan+best_len-1); */
LongerMatch: movl nicematch(%esp), %ebx
movl %eax, bestlen(%esp)
movl %ecx, dsMatchStart(%edx)
cmpl %ebx, %eax
jge LeaveNow
movl window(%esp), %esi
addl %eax, %esi
movl %esi, windowbestlen(%esp)
movzwl -1(%edi,%eax), %ebx
movl dsPrev(%edx), %edi
movl %ebx, scanend(%esp)
movl chainlenwmask(%esp), %edx
jmp LookupLoop
/* Accept the current string, with the maximum possible length. */
LenMaximum: movl deflatestate(%esp), %edx
movl $MAX_MATCH, bestlen(%esp)
movl %ecx, dsMatchStart(%edx)
/* if ((uInt)best_len <= s->lookahead) return (uInt)best_len; */
/* return s->lookahead; */
LeaveNow:
movl deflatestate(%esp), %edx
movl bestlen(%esp), %ebx
movl dsLookahead(%edx), %eax
cmpl %eax, %ebx
jg LookaheadRet
movl %ebx, %eax
LookaheadRet:
/* Restore the stack and return from whence we came. */
addl $LocalVarsSize, %esp
.cfi_def_cfa_offset 20
popl %ebx
.cfi_def_cfa_offset 16
popl %esi
.cfi_def_cfa_offset 12
popl %edi
.cfi_def_cfa_offset 8
popl %ebp
.cfi_def_cfa_offset 4
.cfi_endproc
match_init: ret
contrib/blast/blast.h
浏览文件 @ b253b171
......@@ -57,7 +57,7 @@ int blast(blast_in infun, void *inhow, blast_out outfun, void *outhow,
* use by the application to pass an input descriptor to infun(), if desired.
*
* If left and in are not NULL and *left is not zero when blast() is called,
* then the *left bytes are *in are consumed for input before infun() is used.
* then the *left bytes at *in are consumed for input before infun() is used.
*
* The output function is invoked: err = outfun(how, buf, len), where the bytes
* to be written are buf[0..len-1]. If err is not zero, then blast() returns
......
contrib/delphi/ZLib.pas
浏览文件 @ b253b171
......@@ -152,7 +152,7 @@ procedure DecompressToUserBuf(const InBuf: Pointer; InBytes: Integer;
const OutBuf: Pointer; BufSize: Integer);
const
zlib_version = '1.2.11';
zlib_version = '1.2.12';
type
EZlibError = class(Exception);
......
contrib/dotzlib/DotZLib/UnitTests.cs
浏览文件 @ b253b171
......@@ -156,7 +156,7 @@ namespace DotZLibTests
public void Info_Version()
{
Info info = new Info();
Assert.AreEqual("1.2.11", Info.Version);
Assert.AreEqual("1.2.12", Info.Version);
Assert.AreEqual(32, info.SizeOfUInt);
Assert.AreEqual(32, info.SizeOfULong);
Assert.AreEqual(32, info.SizeOfPointer);
......
contrib/infback9/inftree9.c
浏览文件 @ b253b171
/* inftree9.c -- generate Huffman trees for efficient decoding
* Copyright (C) 1995-2017 Mark Adler
* Copyright (C) 1995-2022 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
......@@ -9,7 +9,7 @@
#define MAXBITS 15
const char inflate9_copyright[] =
" inflate9 1.2.11 Copyright 1995-2017 Mark Adler ";
" inflate9 1.2.12 Copyright 1995-2022 Mark Adler ";
/*
If you use the zlib library in a product, an acknowledgment is welcome
in the documentation of your product. If for some reason you cannot
......@@ -64,7 +64,7 @@ unsigned short FAR *work;
static const unsigned short lext[31] = { /* Length codes 257..285 extra */
128, 128, 128, 128, 128, 128, 128, 128, 129, 129, 129, 129,
130, 130, 130, 130, 131, 131, 131, 131, 132, 132, 132, 132,
133, 133, 133, 133, 144, 77, 202};
133, 133, 133, 133, 144, 199, 202};
static const unsigned short dbase[32] = { /* Distance codes 0..31 base */
1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49,
65, 97, 129, 193, 257, 385, 513, 769, 1025, 1537, 2049, 3073,
......
contrib/inflate86/inffas86.c 已删除 100644 → 0
浏览文件 @ 5ee30652
此差异已折叠。
contrib/inflate86/inffast.S 已删除 100644 → 0
浏览文件 @ 5ee30652
此差异已折叠。
contrib/masmx64/bld_ml64.bat 已删除 100644 → 0
浏览文件 @ 5ee30652
ml64.exe /Flinffasx64 /c /Zi inffasx64.asm
ml64.exe /Flgvmat64 /c /Zi gvmat64.asm
contrib/masmx64/gvmat64.asm 已删除 100644 → 0
浏览文件 @ 5ee30652
;uInt longest_match_x64(
; deflate_state *s,
; IPos cur_match); /* current match */
; gvmat64.asm -- Asm portion of the optimized longest_match for 32 bits x86_64
; (AMD64 on Athlon 64, Opteron, Phenom
; and Intel EM64T on Pentium 4 with EM64T, Pentium D, Core 2 Duo, Core I5/I7)
; Copyright (C) 1995-2010 Jean-loup Gailly, Brian Raiter and Gilles Vollant.
;
; File written by Gilles Vollant, by converting to assembly the longest_match
; from Jean-loup Gailly in deflate.c of zLib and infoZip zip.
;
; and by taking inspiration on asm686 with masm, optimised assembly code
; from Brian Raiter, written 1998
;
; This software is provided 'as-is', without any express or implied
; warranty. In no event will the authors be held liable for any damages
; arising from the use of this software.
;
; Permission is granted to anyone to use this software for any purpose,
; including commercial applications, and to alter it and redistribute it
; freely, subject to the following restrictions:
;
; 1. The origin of this software must not be misrepresented; you must not
; claim that you wrote the original software. If you use this software
; in a product, an acknowledgment in the product documentation would be
; appreciated but is not required.
; 2. Altered source versions must be plainly marked as such, and must not be
; misrepresented as being the original software
; 3. This notice may not be removed or altered from any source distribution.
;
;
;
; http://www.zlib.net
; http://www.winimage.com/zLibDll
; http://www.muppetlabs.com/~breadbox/software/assembly.html
;
; to compile this file for infozip Zip, I use option:
; ml64.exe /Flgvmat64 /c /Zi /DINFOZIP gvmat64.asm
;
; to compile this file for zLib, I use option:
; ml64.exe /Flgvmat64 /c /Zi gvmat64.asm
; Be carrefull to adapt zlib1222add below to your version of zLib
; (if you use a version of zLib before 1.0.4 or after 1.2.2.2, change
; value of zlib1222add later)
;
; This file compile with Microsoft Macro Assembler (x64) for AMD64
;
; ml64.exe is given with Visual Studio 2005/2008/2010 and Windows WDK
;
; (you can get Windows WDK with ml64 for AMD64 from
; http://www.microsoft.com/whdc/Devtools/wdk/default.mspx for low price)
;
;uInt longest_match(s, cur_match)
; deflate_state *s;
; IPos cur_match; /* current match */
.code
longest_match PROC
;LocalVarsSize equ 88
LocalVarsSize equ 72
; register used : rax,rbx,rcx,rdx,rsi,rdi,r8,r9,r10,r11,r12
; free register : r14,r15
; register can be saved : rsp
chainlenwmask equ rsp + 8 - LocalVarsSize ; high word: current chain len
; low word: s->wmask
;window equ rsp + xx - LocalVarsSize ; local copy of s->window ; stored in r10
;windowbestlen equ rsp + xx - LocalVarsSize ; s->window + bestlen , use r10+r11
;scanstart equ rsp + xx - LocalVarsSize ; first two bytes of string ; stored in r12w
;scanend equ rsp + xx - LocalVarsSize ; last two bytes of string use ebx
;scanalign equ rsp + xx - LocalVarsSize ; dword-misalignment of string r13
;bestlen equ rsp + xx - LocalVarsSize ; size of best match so far -> r11d
;scan equ rsp + xx - LocalVarsSize ; ptr to string wanting match -> r9
IFDEF INFOZIP
ELSE
nicematch equ (rsp + 16 - LocalVarsSize) ; a good enough match size
ENDIF
save_rdi equ rsp + 24 - LocalVarsSize
save_rsi equ rsp + 32 - LocalVarsSize
save_rbx equ rsp + 40 - LocalVarsSize
save_rbp equ rsp + 48 - LocalVarsSize
save_r12 equ rsp + 56 - LocalVarsSize
save_r13 equ rsp + 64 - LocalVarsSize
;save_r14 equ rsp + 72 - LocalVarsSize
;save_r15 equ rsp + 80 - LocalVarsSize
; summary of register usage
; scanend ebx
; scanendw bx
; chainlenwmask edx
; curmatch rsi
; curmatchd esi
; windowbestlen r8
; scanalign r9
; scanalignd r9d
; window r10
; bestlen r11
; bestlend r11d
; scanstart r12d
; scanstartw r12w
; scan r13
; nicematch r14d
; limit r15
; limitd r15d
; prev rcx
; all the +4 offsets are due to the addition of pending_buf_size (in zlib
; in the deflate_state structure since the asm code was first written
; (if you compile with zlib 1.0.4 or older, remove the +4).
; Note : these value are good with a 8 bytes boundary pack structure
MAX_MATCH equ 258
MIN_MATCH equ 3
MIN_LOOKAHEAD equ (MAX_MATCH+MIN_MATCH+1)
;;; Offsets for fields in the deflate_state structure. These numbers
;;; are calculated from the definition of deflate_state, with the
;;; assumption that the compiler will dword-align the fields. (Thus,
;;; changing the definition of deflate_state could easily cause this
;;; program to crash horribly, without so much as a warning at
;;; compile time. Sigh.)
; all the +zlib1222add offsets are due to the addition of fields
; in zlib in the deflate_state structure since the asm code was first written
; (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
; (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
; if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
IFDEF INFOZIP
_DATA SEGMENT
COMM window_size:DWORD
; WMask ; 7fff
COMM window:BYTE:010040H
COMM prev:WORD:08000H
; MatchLen : unused
; PrevMatch : unused
COMM strstart:DWORD
COMM match_start:DWORD
; Lookahead : ignore
COMM prev_length:DWORD ; PrevLen
COMM max_chain_length:DWORD
COMM good_match:DWORD
COMM nice_match:DWORD
prev_ad equ OFFSET prev
window_ad equ OFFSET window
nicematch equ nice_match
_DATA ENDS
WMask equ 07fffh
ELSE
IFNDEF zlib1222add
zlib1222add equ 8
ENDIF
dsWSize equ 56+zlib1222add+(zlib1222add/2)
dsWMask equ 64+zlib1222add+(zlib1222add/2)
dsWindow equ 72+zlib1222add
dsPrev equ 88+zlib1222add
dsMatchLen equ 128+zlib1222add
dsPrevMatch equ 132+zlib1222add
dsStrStart equ 140+zlib1222add
dsMatchStart equ 144+zlib1222add
dsLookahead equ 148+zlib1222add
dsPrevLen equ 152+zlib1222add
dsMaxChainLen equ 156+zlib1222add
dsGoodMatch equ 172+zlib1222add
dsNiceMatch equ 176+zlib1222add
window_size equ [ rcx + dsWSize]
WMask equ [ rcx + dsWMask]
window_ad equ [ rcx + dsWindow]
prev_ad equ [ rcx + dsPrev]
strstart equ [ rcx + dsStrStart]
match_start equ [ rcx + dsMatchStart]
Lookahead equ [ rcx + dsLookahead] ; 0ffffffffh on infozip
prev_length equ [ rcx + dsPrevLen]
max_chain_length equ [ rcx + dsMaxChainLen]
good_match equ [ rcx + dsGoodMatch]
nice_match equ [ rcx + dsNiceMatch]
ENDIF
; parameter 1 in r8(deflate state s), param 2 in rdx (cur match)
; see http://weblogs.asp.net/oldnewthing/archive/2004/01/14/58579.aspx and
; http://msdn.microsoft.com/library/en-us/kmarch/hh/kmarch/64bitAMD_8e951dd2-ee77-4728-8702-55ce4b5dd24a.xml.asp
;
; All registers must be preserved across the call, except for
; rax, rcx, rdx, r8, r9, r10, and r11, which are scratch.
;;; Save registers that the compiler may be using, and adjust esp to
;;; make room for our stack frame.
;;; Retrieve the function arguments. r8d will hold cur_match
;;; throughout the entire function. edx will hold the pointer to the
;;; deflate_state structure during the function's setup (before
;;; entering the main loop.
; parameter 1 in rcx (deflate_state* s), param 2 in edx -> r8 (cur match)
; this clear high 32 bits of r8, which can be garbage in both r8 and rdx
mov [save_rdi],rdi
mov [save_rsi],rsi
mov [save_rbx],rbx
mov [save_rbp],rbp
IFDEF INFOZIP
mov r8d,ecx
ELSE
mov r8d,edx
ENDIF
mov [save_r12],r12
mov [save_r13],r13
; mov [save_r14],r14
; mov [save_r15],r15
;;; uInt wmask = s->w_mask;
;;; unsigned chain_length = s->max_chain_length;
;;; if (s->prev_length >= s->good_match) {
;;; chain_length >>= 2;
;;; }
mov edi, prev_length
mov esi, good_match
mov eax, WMask
mov ebx, max_chain_length
cmp edi, esi
jl LastMatchGood
shr ebx, 2
LastMatchGood:
;;; chainlen is decremented once beforehand so that the function can
;;; use the sign flag instead of the zero flag for the exit test.
;;; It is then shifted into the high word, to make room for the wmask
;;; value, which it will always accompany.
dec ebx
shl ebx, 16
or ebx, eax
;;; on zlib only
;;; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
IFDEF INFOZIP
mov [chainlenwmask], ebx
; on infozip nice_match = [nice_match]
ELSE
mov eax, nice_match
mov [chainlenwmask], ebx
mov r10d, Lookahead
cmp r10d, eax
cmovnl r10d, eax
mov [nicematch],r10d
ENDIF
;;; register Bytef *scan = s->window + s->strstart;
mov r10, window_ad
mov ebp, strstart
lea r13, [r10 + rbp]
;;; Determine how many bytes the scan ptr is off from being
;;; dword-aligned.
mov r9,r13
neg r13
and r13,3
;;; IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
;;; s->strstart - (IPos)MAX_DIST(s) : NIL;
IFDEF INFOZIP
mov eax,07efah ; MAX_DIST = (WSIZE-MIN_LOOKAHEAD) (0x8000-(3+8+1))
ELSE
mov eax, window_size
sub eax, MIN_LOOKAHEAD
ENDIF
xor edi,edi
sub ebp, eax
mov r11d, prev_length
cmovng ebp,edi
;;; int best_len = s->prev_length;
;;; Store the sum of s->window + best_len in esi locally, and in esi.
lea rsi,[r10+r11]
;;; register ush scan_start = *(ushf*)scan;
;;; register ush scan_end = *(ushf*)(scan+best_len-1);
;;; Posf *prev = s->prev;
movzx r12d,word ptr [r9]
movzx ebx, word ptr [r9 + r11 - 1]
mov rdi, prev_ad
;;; Jump into the main loop.
mov edx, [chainlenwmask]
cmp bx,word ptr [rsi + r8 - 1]
jz LookupLoopIsZero
LookupLoop1:
and r8d, edx
movzx r8d, word ptr [rdi + r8*2]
cmp r8d, ebp
jbe LeaveNow
sub edx, 00010000h
js LeaveNow
LoopEntry1:
cmp bx,word ptr [rsi + r8 - 1]
jz LookupLoopIsZero
LookupLoop2:
and r8d, edx
movzx r8d, word ptr [rdi + r8*2]
cmp r8d, ebp
jbe LeaveNow
sub edx, 00010000h
js LeaveNow
LoopEntry2:
cmp bx,word ptr [rsi + r8 - 1]
jz LookupLoopIsZero
LookupLoop4:
and r8d, edx
movzx r8d, word ptr [rdi + r8*2]
cmp r8d, ebp
jbe LeaveNow
sub edx, 00010000h
js LeaveNow
LoopEntry4:
cmp bx,word ptr [rsi + r8 - 1]
jnz LookupLoop1
jmp LookupLoopIsZero
;;; do {
;;; match = s->window + cur_match;
;;; if (*(ushf*)(match+best_len-1) != scan_end ||
;;; *(ushf*)match != scan_start) continue;
;;; [...]
;;; } while ((cur_match = prev[cur_match & wmask]) > limit
;;; && --chain_length != 0);
;;;
;;; Here is the inner loop of the function. The function will spend the
;;; majority of its time in this loop, and majority of that time will
;;; be spent in the first ten instructions.
;;;
;;; Within this loop:
;;; ebx = scanend
;;; r8d = curmatch
;;; edx = chainlenwmask - i.e., ((chainlen << 16) | wmask)
;;; esi = windowbestlen - i.e., (window + bestlen)
;;; edi = prev
;;; ebp = limit
LookupLoop:
and r8d, edx
movzx r8d, word ptr [rdi + r8*2]
cmp r8d, ebp
jbe LeaveNow
sub edx, 00010000h
js LeaveNow
LoopEntry:
cmp bx,word ptr [rsi + r8 - 1]
jnz LookupLoop1
LookupLoopIsZero:
cmp r12w, word ptr [r10 + r8]
jnz LookupLoop1
;;; Store the current value of chainlen.
mov [chainlenwmask], edx
;;; Point edi to the string under scrutiny, and esi to the string we
;;; are hoping to match it up with. In actuality, esi and edi are
;;; both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and edx is
;;; initialized to -(MAX_MATCH_8 - scanalign).
lea rsi,[r8+r10]
mov rdx, 0fffffffffffffef8h; -(MAX_MATCH_8)
lea rsi, [rsi + r13 + 0108h] ;MAX_MATCH_8]
lea rdi, [r9 + r13 + 0108h] ;MAX_MATCH_8]
prefetcht1 [rsi+rdx]
prefetcht1 [rdi+rdx]
;;; Test the strings for equality, 8 bytes at a time. At the end,
;;; adjust rdx so that it is offset to the exact byte that mismatched.
;;;
;;; We already know at this point that the first three bytes of the
;;; strings match each other, and they can be safely passed over before
;;; starting the compare loop. So what this code does is skip over 0-3
;;; bytes, as much as necessary in order to dword-align the edi
;;; pointer. (rsi will still be misaligned three times out of four.)
;;;
;;; It should be confessed that this loop usually does not represent
;;; much of the total running time. Replacing it with a more
;;; straightforward "rep cmpsb" would not drastically degrade
;;; performance.
LoopCmps:
mov rax, [rsi + rdx]
xor rax, [rdi + rdx]
jnz LeaveLoopCmps
mov rax, [rsi + rdx + 8]
xor rax, [rdi + rdx + 8]
jnz LeaveLoopCmps8
mov rax, [rsi + rdx + 8+8]
xor rax, [rdi + rdx + 8+8]
jnz LeaveLoopCmps16
add rdx,8+8+8
jnz short LoopCmps
jmp short LenMaximum
LeaveLoopCmps16: add rdx,8
LeaveLoopCmps8: add rdx,8
LeaveLoopCmps:
test eax, 0000FFFFh
jnz LenLower
test eax,0ffffffffh
jnz LenLower32
add rdx,4
shr rax,32
or ax,ax
jnz LenLower
LenLower32:
shr eax,16
add rdx,2
LenLower: sub al, 1
adc rdx, 0
;;; Calculate the length of the match. If it is longer than MAX_MATCH,
;;; then automatically accept it as the best possible match and leave.
lea rax, [rdi + rdx]
sub rax, r9
cmp eax, MAX_MATCH
jge LenMaximum
;;; If the length of the match is not longer than the best match we
;;; have so far, then forget it and return to the lookup loop.
;///////////////////////////////////
cmp eax, r11d
jg LongerMatch
lea rsi,[r10+r11]
mov rdi, prev_ad
mov edx, [chainlenwmask]
jmp LookupLoop
;;; s->match_start = cur_match;
;;; best_len = len;
;;; if (len >= nice_match) break;
;;; scan_end = *(ushf*)(scan+best_len-1);
LongerMatch:
mov r11d, eax
mov match_start, r8d
cmp eax, [nicematch]
jge LeaveNow
lea rsi,[r10+rax]
movzx ebx, word ptr [r9 + rax - 1]
mov rdi, prev_ad
mov edx, [chainlenwmask]
jmp LookupLoop
;;; Accept the current string, with the maximum possible length.
LenMaximum:
mov r11d,MAX_MATCH
mov match_start, r8d
;;; if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
;;; return s->lookahead;
LeaveNow:
IFDEF INFOZIP
mov eax,r11d
ELSE
mov eax, Lookahead
cmp r11d, eax
cmovng eax, r11d
ENDIF
;;; Restore the stack and return from whence we came.
mov rsi,[save_rsi]
mov rdi,[save_rdi]
mov rbx,[save_rbx]
mov rbp,[save_rbp]
mov r12,[save_r12]
mov r13,[save_r13]
; mov r14,[save_r14]
; mov r15,[save_r15]
ret 0
; please don't remove this string !
; Your can freely use gvmat64 in any free or commercial app
; but it is far better don't remove the string in the binary!
db 0dh,0ah,"asm686 with masm, optimised assembly code from Brian Raiter, written 1998, converted to amd 64 by Gilles Vollant 2005",0dh,0ah,0
longest_match ENDP
match_init PROC
ret 0
match_init ENDP
END
contrib/masmx64/inffas8664.c 已删除 100644 → 0
浏览文件 @ 5ee30652
/* inffas8664.c is a hand tuned assembler version of inffast.c - fast decoding
* version for AMD64 on Windows using Microsoft C compiler
*
* Copyright (C) 1995-2003 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*
* Copyright (C) 2003 Chris Anderson <christop@charm.net>
* Please use the copyright conditions above.
*
* 2005 - Adaptation to Microsoft C Compiler for AMD64 by Gilles Vollant
*
* inffas8664.c call function inffas8664fnc in inffasx64.asm
* inffasx64.asm is automatically convert from AMD64 portion of inffas86.c
*
* Dec-29-2003 -- I added AMD64 inflate asm support. This version is also
* slightly quicker on x86 systems because, instead of using rep movsb to copy
* data, it uses rep movsw, which moves data in 2-byte chunks instead of single
* bytes. I've tested the AMD64 code on a Fedora Core 1 + the x86_64 updates
* from http://fedora.linux.duke.edu/fc1_x86_64
* which is running on an Athlon 64 3000+ / Gigabyte GA-K8VT800M system with
* 1GB ram. The 64-bit version is about 4% faster than the 32-bit version,
* when decompressing mozilla-source-1.3.tar.gz.
*
* Mar-13-2003 -- Most of this is derived from inffast.S which is derived from
* the gcc -S output of zlib-1.2.0/inffast.c. Zlib-1.2.0 is in beta release at
* the moment. I have successfully compiled and tested this code with gcc2.96,
* gcc3.2, icc5.0, msvc6.0. It is very close to the speed of inffast.S
* compiled with gcc -DNO_MMX, but inffast.S is still faster on the P3 with MMX
* enabled. I will attempt to merge the MMX code into this version. Newer
* versions of this and inffast.S can be found at
* http://www.eetbeetee.com/zlib/ and http://www.charm.net/~christop/zlib/
*
*/
#include <stdio.h>
#include "zutil.h"
#include "inftrees.h"
#include "inflate.h"
#include "inffast.h"
/* Mark Adler's comments from inffast.c: */
/*
Decode literal, length, and distance codes and write out the resulting
literal and match bytes until either not enough input or output is
available, an end-of-block is encountered, or a data error is encountered.
When large enough input and output buffers are supplied to inflate(), for
example, a 16K input buffer and a 64K output buffer, more than 95% of the
inflate execution time is spent in this routine.
Entry assumptions:
state->mode == LEN
strm->avail_in >= 6
strm->avail_out >= 258
start >= strm->avail_out
state->bits < 8
On return, state->mode is one of:
LEN -- ran out of enough output space or enough available input
TYPE -- reached end of block code, inflate() to interpret next block
BAD -- error in block data
Notes:
- The maximum input bits used by a length/distance pair is 15 bits for the
length code, 5 bits for the length extra, 15 bits for the distance code,
and 13 bits for the distance extra. This totals 48 bits, or six bytes.
Therefore if strm->avail_in >= 6, then there is enough input to avoid
checking for available input while decoding.
- The maximum bytes that a single length/distance pair can output is 258
bytes, which is the maximum length that can be coded. inflate_fast()
requires strm->avail_out >= 258 for each loop to avoid checking for
output space.
*/
typedef struct inffast_ar {
/* 64 32 x86 x86_64 */
/* ar offset register */
/* 0 0 */ void *esp; /* esp save */
/* 8 4 */ void *ebp; /* ebp save */
/* 16 8 */ unsigned char FAR *in; /* esi rsi local strm->next_in */
/* 24 12 */ unsigned char FAR *last; /* r9 while in < last */
/* 32 16 */ unsigned char FAR *out; /* edi rdi local strm->next_out */
/* 40 20 */ unsigned char FAR *beg; /* inflate()'s init next_out */
/* 48 24 */ unsigned char FAR *end; /* r10 while out < end */
/* 56 28 */ unsigned char FAR *window;/* size of window, wsize!=0 */
/* 64 32 */ code const FAR *lcode; /* ebp rbp local strm->lencode */
/* 72 36 */ code const FAR *dcode; /* r11 local strm->distcode */
/* 80 40 */ size_t /*unsigned long */hold; /* edx rdx local strm->hold */
/* 88 44 */ unsigned bits; /* ebx rbx local strm->bits */
/* 92 48 */ unsigned wsize; /* window size */
/* 96 52 */ unsigned write; /* window write index */
/*100 56 */ unsigned lmask; /* r12 mask for lcode */
/*104 60 */ unsigned dmask; /* r13 mask for dcode */
/*108 64 */ unsigned len; /* r14 match length */
/*112 68 */ unsigned dist; /* r15 match distance */
/*116 72 */ unsigned status; /* set when state chng*/
} type_ar;
#ifdef ASMINF
void inflate_fast(strm, start)
z_streamp strm;
unsigned start; /* inflate()'s starting value for strm->avail_out */
{
struct inflate_state FAR *state;
type_ar ar;
void inffas8664fnc(struct inffast_ar * par);
#if (defined( __GNUC__ ) && defined( __amd64__ ) && ! defined( __i386 )) || (defined(_MSC_VER) && defined(_M_AMD64))
#define PAD_AVAIL_IN 6
#define PAD_AVAIL_OUT 258
#else
#define PAD_AVAIL_IN 5
#define PAD_AVAIL_OUT 257
#endif
/* copy state to local variables */
state = (struct inflate_state FAR *)strm->state;
ar.in = strm->next_in;
ar.last = ar.in + (strm->avail_in - PAD_AVAIL_IN);
ar.out = strm->next_out;
ar.beg = ar.out - (start - strm->avail_out);
ar.end = ar.out + (strm->avail_out - PAD_AVAIL_OUT);
ar.wsize = state->wsize;
ar.write = state->wnext;
ar.window = state->window;
ar.hold = state->hold;
ar.bits = state->bits;
ar.lcode = state->lencode;
ar.dcode = state->distcode;
ar.lmask = (1U << state->lenbits) - 1;
ar.dmask = (1U << state->distbits) - 1;
/* decode literals and length/distances until end-of-block or not enough
input data or output space */
/* align in on 1/2 hold size boundary */
while (((size_t)(void *)ar.in & (sizeof(ar.hold) / 2 - 1)) != 0) {
ar.hold += (unsigned long)*ar.in++ << ar.bits;
ar.bits += 8;
}
inffas8664fnc(&ar);
if (ar.status > 1) {
if (ar.status == 2)
strm->msg = "invalid literal/length code";
else if (ar.status == 3)
strm->msg = "invalid distance code";
else
strm->msg = "invalid distance too far back";
state->mode = BAD;
}
else if ( ar.status == 1 ) {
state->mode = TYPE;
}
/* return unused bytes (on entry, bits < 8, so in won't go too far back) */
ar.len = ar.bits >> 3;
ar.in -= ar.len;
ar.bits -= ar.len << 3;
ar.hold &= (1U << ar.bits) - 1;
/* update state and return */
strm->next_in = ar.in;
strm->next_out = ar.out;
strm->avail_in = (unsigned)(ar.in < ar.last ?
PAD_AVAIL_IN + (ar.last - ar.in) :
PAD_AVAIL_IN - (ar.in - ar.last));
strm->avail_out = (unsigned)(ar.out < ar.end ?
PAD_AVAIL_OUT + (ar.end - ar.out) :
PAD_AVAIL_OUT - (ar.out - ar.end));
state->hold = (unsigned long)ar.hold;
state->bits = ar.bits;
return;
}
#endif
contrib/masmx64/inffasx64.asm 已删除 100644 → 0
浏览文件 @ 5ee30652
此差异已折叠。
contrib/masmx64/readme.txt 已删除 100644 → 0
浏览文件 @ 5ee30652
Summary
-------
This directory contains ASM implementations of the functions
longest_match() and inflate_fast(), for 64 bits x86 (both AMD64 and Intel EM64t),
for use with Microsoft Macro Assembler (x64) for AMD64 and Microsoft C++ 64 bits.
gvmat64.asm is written by Gilles Vollant (2005), by using Brian Raiter 686/32 bits
assembly optimized version from Jean-loup Gailly original longest_match function
inffasx64.asm and inffas8664.c were written by Chris Anderson, by optimizing
original function from Mark Adler
Use instructions
----------------
Assemble the .asm files using MASM and put the object files into the zlib source
directory. You can also get object files here:
http://www.winimage.com/zLibDll/zlib124_masm_obj.zip
define ASMV and ASMINF in your project. Include inffas8664.c in your source tree,
and inffasx64.obj and gvmat64.obj as object to link.
Build instructions
------------------
run bld_64.bat with Microsoft Macro Assembler (x64) for AMD64 (ml64.exe)
ml64.exe is given with Visual Studio 2005, Windows 2003 server DDK
You can get Windows 2003 server DDK with ml64 and cl for AMD64 from
http://www.microsoft.com/whdc/devtools/ddk/default.mspx for low price)
contrib/masmx86/bld_ml32.bat 已删除 100644 → 0
浏览文件 @ 5ee30652
ml /coff /Zi /c /Flmatch686.lst match686.asm
ml /coff /Zi /c /Flinffas32.lst inffas32.asm
contrib/masmx86/inffas32.asm 已删除 100644 → 0
浏览文件 @ 5ee30652
此差异已折叠。
contrib/masmx86/match686.asm 已删除 100644 → 0
浏览文件 @ 5ee30652
此差异已折叠。
contrib/masmx86/readme.txt 已删除 100644 → 0
浏览文件 @ 5ee30652
此差异已折叠。
contrib/minizip/Makefile
浏览文件 @ b253b171
此差异已折叠。
contrib/minizip/configure.ac
浏览文件 @ b253b171
# -*- Autoconf -*-
# Process this file with autoconf to produce a configure script.
AC_INIT([minizip], [1.2.11], [bugzilla.redhat.com])
AC_INIT([minizip], [1.2.12], [bugzilla.redhat.com])
AC_CONFIG_SRCDIR([minizip.c])
AM_INIT_AUTOMAKE([foreign])
LT_INIT
......
contrib/minizip/crypt.h
浏览文件 @ b253b171
此差异已折叠。
contrib/minizip/ioapi.c
浏览文件 @ b253b171
此差异已折叠。
contrib/minizip/ioapi.h
浏览文件 @ b253b171
此差异已折叠。
contrib/minizip/miniunz.c
浏览文件 @ b253b171
此差异已折叠。
contrib/minizip/minizip.c
浏览文件 @ b253b171
此差异已折叠。
contrib/minizip/unzip.c
浏览文件 @ b253b171
此差异已折叠。
contrib/minizip/unzip.h
浏览文件 @ b253b171
此差异已折叠。
contrib/minizip/zip.c
浏览文件 @ b253b171
此差异已折叠。
contrib/minizip/zip.h
浏览文件 @ b253b171
此差异已折叠。
contrib/pascal/zlibpas.pas
浏览文件 @ b253b171
此差异已折叠。
contrib/vstudio/readme.txt
浏览文件 @ b253b171
此差异已折叠。
contrib/vstudio/vc10/zlib.rc
浏览文件 @ b253b171
此差异已折叠。
contrib/vstudio/vc10/zlibvc.def
浏览文件 @ b253b171
此差异已折叠。
contrib/vstudio/vc11/zlib.rc
浏览文件 @ b253b171
此差异已折叠。
contrib/vstudio/vc11/zlibvc.def
浏览文件 @ b253b171
此差异已折叠。
contrib/vstudio/vc12/zlib.rc
浏览文件 @ b253b171
此差异已折叠。
contrib/vstudio/vc12/zlibvc.def
浏览文件 @ b253b171
此差异已折叠。
contrib/vstudio/vc14/zlib.rc
浏览文件 @ b253b171
此差异已折叠。
contrib/vstudio/vc14/zlibvc.def
浏览文件 @ b253b171
此差异已折叠。
contrib/vstudio/vc9/zlib.rc
浏览文件 @ b253b171
此差异已折叠。
contrib/vstudio/vc9/zlibvc.def
浏览文件 @ b253b171
此差异已折叠。
crc32.c
浏览文件 @ b253b171
此差异已折叠。
crc32.h
浏览文件 @ b253b171
此差异已折叠。
deflate.c
浏览文件 @ b253b171
此差异已折叠。
deflate.h
浏览文件 @ b253b171
此差异已折叠。
doc/crc-doc.1.0.pdf 0 → 100644
浏览文件 @ b253b171
文件已添加
doc/txtvsbin.txt
浏览文件 @ b253b171
此差异已折叠。
examples/README.examples
浏览文件 @ b253b171
此差异已折叠。
examples/enough.c
浏览文件 @ b253b171
此差异已折叠。
examples/gzappend.c
浏览文件 @ b253b171
此差异已折叠。
examples/gzlog.c
浏览文件 @ b253b171
此差异已折叠。
examples/gznorm.c 0 → 100644
浏览文件 @ b253b171
此差异已折叠。
examples/zran.c
浏览文件 @ b253b171
此差异已折叠。
examples/zran.h 0 → 100644
浏览文件 @ b253b171
此差异已折叠。
gzguts.h
浏览文件 @ b253b171
此差异已折叠。
gzlib.c
浏览文件 @ b253b171
此差异已折叠。
gzread.c
浏览文件 @ b253b171
此差异已折叠。
gzwrite.c
浏览文件 @ b253b171
此差异已折叠。
infback.c
浏览文件 @ b253b171
此差异已折叠。
inffast.c
浏览文件 @ b253b171
此差异已折叠。
inflate.c
浏览文件 @ b253b171
此差异已折叠。
inflate.h
浏览文件 @ b253b171
此差异已折叠。
inftrees.c
浏览文件 @ b253b171
此差异已折叠。
os400/README400
浏览文件 @ b253b171
此差异已折叠。
os400/zlib.inc
浏览文件 @ b253b171
此差异已折叠。
qnx/package.qpg
浏览文件 @ b253b171
此差异已折叠。
test/example.c
浏览文件 @ b253b171
此差异已折叠。
treebuild.xml
浏览文件 @ b253b171
此差异已折叠。
trees.c
浏览文件 @ b253b171
此差异已折叠。
win32/Makefile.bor
浏览文件 @ b253b171
此差异已折叠。
win32/Makefile.gcc
浏览文件 @ b253b171
此差异已折叠。
win32/Makefile.msc
浏览文件 @ b253b171
此差异已折叠。
win32/README-WIN32.txt
浏览文件 @ b253b171
此差异已折叠。
win32/zlib.def
浏览文件 @ b253b171
此差异已折叠。
zlib.3
浏览文件 @ b253b171
此差异已折叠。
zlib.3.pdf
浏览文件 @ b253b171
无法预览此类型文件
zlib.h
浏览文件 @ b253b171
此差异已折叠。
zlib.map
浏览文件 @ b253b171
此差异已折叠。
zutil.c
浏览文件 @ b253b171
此差异已折叠。
zutil.h
浏览文件 @ b253b171
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或