Skip to content

T
Third Party Zlib

OpenHarmony / Third Party Zlib
1 年多 前同步成功

通知 16
Star 112
Fork 2
T
Third Party Zlib
提交 b1c19ca6 编写于 作者: M Mark Adler
浏览文件
操作

zlib 1.2.3.1

上级 abf180a0
展开全部 隐藏空白更改
内联 并排
Showing with 3641 addition and 495 deletion
ChangeLog
浏览文件 @ b1c19ca6
ChangeLog file for zlib
Changes in 1.2.3.1 (16 August 2006)
- Add watcom directory with OpenWatcom make files [Daniel]
- Remove #undef of FAR in zconf.in.h for MVS [Fedtke]
- Update make_vms.com [Zinser]
- Use -fPIC for shared build in configure [Teredesai, Nicholson]
- Use only major version number for libz.so on IRIX and OSF1 [Reinholdtsen]
- Use fdopen() (not _fdopen()) for Interix in zutil.h [BŠck]
- Add some FAQ entries about the contrib directory
- Update the MVS question in the FAQ
- Avoid extraneous reads after EOF in gzio.c [Brown]
- Correct spelling of "successfully" in gzio.c [Randers-Pehrson]
- Add comments to zlib.h about gzerror() usage [Brown]
- Set extra flags in gzip header in gzopen() like deflate() does
- Make configure options more compatible with double-dash conventions
[Weigelt]
- Clean up compilation under Solaris SunStudio cc [Rowe, Reinholdtsen]
- Fix uninstall target in Makefile.in [Truta]
- Add pkgconfig support [Weigelt]
- Use $(DESTDIR) macro in Makefile.in [Reinholdtsen, Weigelt]
- Replace set_data_type() with a more accurate detect_data_type() in
trees.c, according to the txtvsbin.txt document [Truta]
- Swap the order of #include <stdio.h> and #include "zlib.h" in
gzio.c, example.c and minigzip.c [Truta]
- Shut up annoying VS2005 warnings about standard C deprecation [Rowe,
Truta] (where?)
- Fix target "clean" from win32/Makefile.bor [Truta]
- Create .pdb and .manifest files in win32/makefile.msc [Ziegler, Rowe]
- Update zlib www home address in win32/DLL_FAQ.txt [Truta]
- Update contrib/masmx86/inffas32.asm for VS2005 [Vollant, Van Wassenhove]
- Enable browse info in the "Debug" and "ASM Debug" configurations in
the Visual C++ 6 project, and set (non-ASM) "Debug" as default [Truta]
- Add pkgconfig support [Weigelt]
- Add ZLIB_VER_MAJOR, ZLIB_VER_MINOR and ZLIB_VER_REVISION in zlib.h,
for use in win32/zlib1.rc [Polushin, Rowe, Truta]
- Add a document that explains the new text detection scheme to
doc/txtvsbin.txt [Truta]
- Add rfc1950.txt, rfc1951.txt and rfc1952.txt to doc/ [Truta]
- Move algorithm.txt into doc/ [Truta]
- Synchronize FAQ with website
- Fix compressBound(), was low for some pathological cases [Fearnley]
- Take into account wrapper variations in deflateBound()
- Set examples/zpipe.c input and output to binary mode for Windows
- Update examples/zlib_how.html with new zpipe.c (also web site)
- Fix some warnings in examples/gzlog.c and examples/zran.c (it seems
that gcc became pickier in 4.0)
- Add zlib.map for Linux: "All symbols from zlib-1.1.4 remain
un-versioned, the patch adds versioning only for symbols introduced in
zlib-1.2.0 or later. It also declares as local those symbols which are
not designed to be exported." [Levin]
- Update Z_PREFIX list in zconf.in.h, add --zprefix option to configure
- Do not initialize global static by default in trees.c, add a response
NO_INIT_GLOBAL_POINTERS to initialize them if needed [Marquess]
- Don't use strerror() in gzio.c under WinCE [Yakimov]
- Don't use errno.h in zutil.h under WinCE [Yakimov]
- Move arguments for AR to its usage to allow replacing ar [Marot]
- Add HAVE_VISIBILITY_PRAGMA in zconf.in.h for Mozilla [Randers-Pehrson]
- Improve inflateInit() and inflateInit2() documentation
- Fix structure size comment in inflate.h
- Change configure help option from --h* to --help [Santos]
Changes in 1.2.3 (18 July 2005)
- Apply security vulnerability fixes to contrib/infback9 as well
- Clean up some text files (carriage returns, trailing space)
......
FAQ
浏览文件 @ b1c19ca6
......@@ -77,7 +77,7 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
11. Can zlib handle .zip archives?
Not by itself, no. See the directory contrib/minizip in the zlib
Not by itself, no. See the directory contrib/minizip in the zlib
distribution.
12. Can zlib handle .Z files?
......@@ -217,10 +217,14 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
29. Does zlib work on MVS, OS/390, CICS, etc.?
We don't know for sure. We have heard occasional reports of success on
these systems. If you do use it on one of these, please provide us with
a report, instructions, and patches that we can reference when we get
these questions. Thanks.
Yes, there are working ports of zlib 1.1.4 to MVS which you can find
here:
http://www.homerow.net/asm/zlib390.htm
http://www.homerow.net/asm/zlibLE.htm
If these are updated to more recent versions of zlib, please let us
know. Thanks.
30. Is there some simpler, easier to read version of inflate I can look at
to understand the deflate format?
......@@ -271,7 +275,9 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
http://www.ijs.si/software/snprintf/
Note that you should be using the most recent version of zlib. Versions
1.1.3 and before were subject to a double-free vulnerability.
1.1.3 and before were subject to a double-free vulnerability, and version
1.2.1 was subject to an access exception when decompressing invalid
compressed data.
34. Is there a Java version of zlib?
......@@ -292,8 +298,8 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
performing a conditional jump that depends on an uninitialized value.
Isn't that a bug?
No. That is intentional for performance reasons, and the output of
deflate is not affected. This only started showing up recently since
No. That is intentional for performance reasons, and the output of
deflate is not affected. This only started showing up recently since
zlib 1.2.x uses malloc() by default for allocations, whereas earlier
versions used calloc(), which zeros out the allocated memory.
......@@ -333,7 +339,23 @@ The lastest zlib FAQ is at http://www.gzip.org/zlib/zlib_faq.html
In any case, the compression improvements are so modest compared to other
more modern approaches, that it's not worth the effort to implement.
41. Can you please sign these lengthy legal documents and fax them back to us
41. I'm having a problem with the zip functions in zlib, can you help?
There are no zip functions in zlib. You are probably using minizip by
Giles Vollant, which is found in the contrib directory of zlib. It is not
part of zlib. In fact none of the stuff in contrib is part of zlib. The
files in there are not supported by the zlib authors. You need to contact
the authors of the contribution for help.
42. The match.asm code in contrib is under the GNU General Public License.
Since it's part of zlib, doesn't that mean that all of zlib falls under the
GNU GPL?
No. The files in contrib are not part of zlib. They were contributed by
other authors and are provided as a convenience to the user within the zlib
distribution. Each of the items in contrib have their own license.
43. Can you please sign these lengthy legal documents and fax them back to us
so that we can use your software in our product?
No. Go away. Shoo.
INDEX
浏览文件 @ b1c19ca6
......@@ -4,20 +4,26 @@ INDEX this file
Makefile makefile for Unix (generated by configure)
Makefile.in makefile for Unix (template for configure)
README guess what
algorithm.txt description of the (de)compression algorithm
configure configure script for Unix
make_vms.com makefile for VMS
zconf.in.h template for zconf.h (used by configure)
zlib.3 Man page for zlib
zlib.map Linux symbol information
zlib.pc.in ??
amiga/ makefiles for Amiga SAS C
as400/ makefiles for IBM AS/400
doc/ documentation for formats and algorithms
msdos/ makefiles for MSDOS
old/ makefiles for various architectures and zlib documentation
files that have not yet been updated for zlib 1.2.x
projects/ projects for various Integrated Development Environments
qnx/ makefiles for QNX
todo/ works in progress
watcom/ makefiles for OpenWatcom
win32/ makefiles for Windows
zlib public header files (must be kept):
zlib public header files (required for library use):
zconf.h
zlib.h
......@@ -46,6 +52,7 @@ zutil.h
source files for sample programs:
example.c
minigzip.c
See examples/README.examples for more
unsupported contribution by third parties
See contrib/README.contrib
Makefile
浏览文件 @ b1c19ca6
# Makefile for zlib
# Copyright (C) 1995-2005 Jean-loup Gailly.
# Copyright (C) 1995-2006 Jean-loup Gailly.
# For conditions of distribution and use, see copyright notice in zlib.h
# To compile and test, type:
......@@ -30,10 +30,10 @@ CPP=$(CC) -E
LIBS=libz.a
SHAREDLIB=libz.so
SHAREDLIBV=libz.so.1.2.3
SHAREDLIBV=libz.so.1.2.3.1
SHAREDLIBM=libz.so.1
AR=ar rc
AR=ar
RANLIB=ranlib
TAR=tar
SHELL=/bin/sh
......@@ -45,6 +45,7 @@ libdir = ${exec_prefix}/lib
includedir = ${prefix}/include
mandir = ${prefix}/share/man
man3dir = ${mandir}/man3
pkgconfigdir = ${libdir}/pkgconfig
OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
zutil.o inflate.o infback.o inftrees.o inffast.o
......@@ -90,33 +91,37 @@ minigzip$(EXE): minigzip.o $(LIBS)
$(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
install: $(LIBS)
-@if [ ! -d $(exec_prefix) ]; then mkdir -p $(exec_prefix); fi
-@if [ ! -d $(includedir) ]; then mkdir -p $(includedir); fi
-@if [ ! -d $(libdir) ]; then mkdir -p $(libdir); fi
-@if [ ! -d $(man3dir) ]; then mkdir -p $(man3dir); fi
cp zlib.h zconf.h $(includedir)
chmod 644 $(includedir)/zlib.h $(includedir)/zconf.h
cp $(LIBS) $(libdir)
cd $(libdir); chmod 755 $(LIBS)
-@(cd $(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1
cd $(libdir); if test -f $(SHAREDLIBV); then \
-@if [ ! -d $(DESTDIR)$(exec_prefix) ]; then mkdir -p $(DESTDIR)$(exec_prefix); fi
-@if [ ! -d $(DESTDIR)$(includedir) ]; then mkdir -p $(DESTDIR)$(includedir); fi
-@if [ ! -d $(DESTDIR)$(libdir) ]; then mkdir -p $(DESTDIR)$(libdir); fi
-@if [ ! -d $(DESTDIR)$(man3dir) ]; then mkdir -p $(DESTDIR)$(man3dir); fi
-@if [ ! -d $(DESTDIR)$(pkgconfigdir) ]; then mkdir -p $(DESTDIR)$(pkgconfigdir); fi
cp zlib.h zconf.h $(DESTDIR)$(includedir)
chmod 644 $(DESTDIR)$(includedir)/zlib.h $(DESTDIR)$(includedir)/zconf.h
cp $(LIBS) $(DESTDIR)$(libdir)
cd $(DESTDIR)$(libdir); chmod 755 $(LIBS)
-@(cd $(DESTDIR)$(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1
cd $(DESTDIR)$(libdir); if test -f $(SHAREDLIBV); then \
rm -f $(SHAREDLIB) $(SHAREDLIBM); \
ln -s $(SHAREDLIBV) $(SHAREDLIB); \
ln -s $(SHAREDLIBV) $(SHAREDLIBM); \
(ldconfig || true) >/dev/null 2>&1; \
fi
cp zlib.3 $(man3dir)
chmod 644 $(man3dir)/zlib.3
cp zlib.3 $(DESTDIR)$(man3dir)
chmod 644 $(DESTDIR)$(man3dir)/zlib.3
cp zlib.pc $(DESTDIR)$(pkgconfigdir)
chmod 644 $(DESTDIR)$(pkgconfigdir)/zlib.pc
# The ranlib in install is needed on NeXTSTEP which checks file times
# ldconfig is for Linux
uninstall:
cd $(includedir); \
cd $(libdir); rm -f libz.a; \
cd $(DESTDIR)$(includedir); rm -f zlib.h zconf.h
cd $(DESTDIR)$(libdir); rm -f libz.a; \
if test -f $(SHAREDLIBV); then \
rm -f $(SHAREDLIBV) $(SHAREDLIB) $(SHAREDLIBM); \
fi
cd $(man3dir); rm -f zlib.3
cd $(DESTDIR)$(man3dir); rm -f zlib.3
cd $(DESTDIR)$(pkgconfigdir); rm -f zlib.pc
mostlyclean: clean
clean:
......@@ -128,7 +133,7 @@ maintainer-clean: distclean
distclean: clean
cp -p Makefile.in Makefile
cp -p zconf.in.h zconf.h
rm -f .DS_Store
rm -f zlib.pc .DS_Store
tags:
etags *.[ch]
......
Makefile.in
浏览文件 @ b1c19ca6
# Makefile for zlib
# Copyright (C) 1995-2005 Jean-loup Gailly.
# Copyright (C) 1995-2006 Jean-loup Gailly.
# For conditions of distribution and use, see copyright notice in zlib.h
# To compile and test, type:
......@@ -30,10 +30,10 @@ CPP=$(CC) -E
LIBS=libz.a
SHAREDLIB=libz.so
SHAREDLIBV=libz.so.1.2.3
SHAREDLIBV=libz.so.1.2.3.1
SHAREDLIBM=libz.so.1
AR=ar rc
AR=ar
RANLIB=ranlib
TAR=tar
SHELL=/bin/sh
......@@ -45,6 +45,7 @@ libdir = ${exec_prefix}/lib
includedir = ${prefix}/include
mandir = ${prefix}/share/man
man3dir = ${mandir}/man3
pkgconfigdir = ${libdir}/pkgconfig
OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
zutil.o inflate.o infback.o inftrees.o inffast.o
......@@ -90,33 +91,37 @@ minigzip$(EXE): minigzip.o $(LIBS)
$(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
install: $(LIBS)
-@if [ ! -d $(exec_prefix) ]; then mkdir -p $(exec_prefix); fi
-@if [ ! -d $(includedir) ]; then mkdir -p $(includedir); fi
-@if [ ! -d $(libdir) ]; then mkdir -p $(libdir); fi
-@if [ ! -d $(man3dir) ]; then mkdir -p $(man3dir); fi
cp zlib.h zconf.h $(includedir)
chmod 644 $(includedir)/zlib.h $(includedir)/zconf.h
cp $(LIBS) $(libdir)
cd $(libdir); chmod 755 $(LIBS)
-@(cd $(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1
cd $(libdir); if test -f $(SHAREDLIBV); then \
-@if [ ! -d $(DESTDIR)$(exec_prefix) ]; then mkdir -p $(DESTDIR)$(exec_prefix); fi
-@if [ ! -d $(DESTDIR)$(includedir) ]; then mkdir -p $(DESTDIR)$(includedir); fi
-@if [ ! -d $(DESTDIR)$(libdir) ]; then mkdir -p $(DESTDIR)$(libdir); fi
-@if [ ! -d $(DESTDIR)$(man3dir) ]; then mkdir -p $(DESTDIR)$(man3dir); fi
-@if [ ! -d $(DESTDIR)$(pkgconfigdir) ]; then mkdir -p $(DESTDIR)$(pkgconfigdir); fi
cp zlib.h zconf.h $(DESTDIR)$(includedir)
chmod 644 $(DESTDIR)$(includedir)/zlib.h $(DESTDIR)$(includedir)/zconf.h
cp $(LIBS) $(DESTDIR)$(libdir)
cd $(DESTDIR)$(libdir); chmod 755 $(LIBS)
-@(cd $(DESTDIR)$(libdir); $(RANLIB) libz.a || true) >/dev/null 2>&1
cd $(DESTDIR)$(libdir); if test -f $(SHAREDLIBV); then \
rm -f $(SHAREDLIB) $(SHAREDLIBM); \
ln -s $(SHAREDLIBV) $(SHAREDLIB); \
ln -s $(SHAREDLIBV) $(SHAREDLIBM); \
(ldconfig || true) >/dev/null 2>&1; \
fi
cp zlib.3 $(man3dir)
chmod 644 $(man3dir)/zlib.3
cp zlib.3 $(DESTDIR)$(man3dir)
chmod 644 $(DESTDIR)$(man3dir)/zlib.3
cp zlib.pc $(DESTDIR)$(pkgconfigdir)
chmod 644 $(DESTDIR)$(pkgconfigdir)/zlib.pc
# The ranlib in install is needed on NeXTSTEP which checks file times
# ldconfig is for Linux
uninstall:
cd $(includedir); \
cd $(libdir); rm -f libz.a; \
cd $(DESTDIR)$(includedir); rm -f zlib.h zconf.h
cd $(DESTDIR)$(libdir); rm -f libz.a; \
if test -f $(SHAREDLIBV); then \
rm -f $(SHAREDLIBV) $(SHAREDLIB) $(SHAREDLIBM); \
fi
cd $(man3dir); rm -f zlib.3
cd $(DESTDIR)$(man3dir); rm -f zlib.3
cd $(DESTDIR)$(pkgconfigdir); rm -f zlib.pc
mostlyclean: clean
clean:
......@@ -128,7 +133,7 @@ maintainer-clean: distclean
distclean: clean
cp -p Makefile.in Makefile
cp -p zconf.in.h zconf.h
rm -f .DS_Store
rm -f zlib.pc .DS_Store
tags:
etags *.[ch]
......
README
浏览文件 @ b1c19ca6
ZLIB DATA COMPRESSION LIBRARY
zlib 1.2.3 is a general purpose data compression library. All the code is
zlib 1.2.3.1 is a general purpose data compression library. All the code is
thread safe. The data format used by the zlib library is described by RFCs
(Request for Comments) 1950 to 1952 in the files
http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format)
......@@ -33,7 +33,7 @@ Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan. 1997
issue of Dr. Dobb's Journal; a copy of the article is available in
http://dogma.net/markn/articles/zlibtool/zlibtool.htm
The changes made in version 1.2.3 are documented in the file ChangeLog.
The changes made in version 1.2.3.1 are documented in the file ChangeLog.
Unsupported third party contributions are provided in directory "contrib".
......
as400/zlib.inc
浏览文件 @ b1c19ca6
* ZLIB.INC - Interface to the general purpose compression library
*
* ILE RPG400 version by Patrick Monnerat, DATASPHERE.
* Version 1.2.3
* Version 1.2.3.1
*
*
* WARNING:
......@@ -22,8 +22,8 @@
*
* Versioning information.
*
D ZLIB_VERSION C '1.2.3'
D ZLIB_VERNUM C X'1230'
D ZLIB_VERSION C '1.2.3.1'
D ZLIB_VERNUM C X'1231'
*
* Other equates.
*
......
compress.c
浏览文件 @ b1c19ca6
/* compress.c -- compress a memory buffer
* Copyright (C) 1995-2003 Jean-loup Gailly.
* Copyright (C) 1995-2005 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
......@@ -75,5 +75,6 @@ int ZEXPORT compress (dest, destLen, source, sourceLen)
uLong ZEXPORT compressBound (sourceLen)
uLong sourceLen;
{
return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) + 11;
return sourceLen + (sourceLen >> 12) + (sourceLen >> 14) +
(sourceLen >> 25) + 13;
}
configure
浏览文件 @ b1c19ca6
......@@ -23,7 +23,8 @@ LDFLAGS="-L. ${LIBS}"
VER=`sed -n -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`
VER2=`sed -n -e '/VERSION "/s/.*"\([0-9]*\\.[0-9]*\)\\..*/\1/p' < zlib.h`
VER1=`sed -n -e '/VERSION "/s/.*"\([0-9]*\)\\..*/\1/p' < zlib.h`
AR=${AR-"ar rc"}
AR=${AR-"ar"}
AR_RC="${AR} rc"
RANLIB=${RANLIB-"ranlib"}
prefix=${prefix-/usr/local}
exec_prefix=${exec_prefix-'${prefix}'}
......@@ -32,6 +33,7 @@ includedir=${includedir-'${prefix}/include'}
mandir=${mandir-'${prefix}/share/man'}
shared_ext='.so'
shared=0
zprefix=0
gcc=0
old_cc="$CC"
old_cflags="$CFLAGS"
......@@ -39,20 +41,23 @@ old_cflags="$CFLAGS"
while test $# -ge 1
do
case "$1" in
-h* | --h*)
-h* | --help)
echo 'usage:'
echo ' configure [--shared] [--prefix=PREFIX] [--exec_prefix=EXPREFIX]'
echo ' [--libdir=LIBDIR] [--includedir=INCLUDEDIR]'
echo ' [--libdir=LIBDIR] [--includedir=INCLUDEDIR] [--zprefix]'
exit 0;;
-p*=* | --p*=*) prefix=`echo $1 | sed 's/[-a-z_]*=//'`; shift;;
-e*=* | --e*=*) exec_prefix=`echo $1 | sed 's/[-a-z_]*=//'`; shift;;
-p*=* | --prefix=*) prefix=`echo $1 | sed 's/[-a-z_]*=//'`; shift;;
-e*=* | --eprefix=*) exec_prefix=`echo $1 | sed 's/[-a-z_]*=//'`; shift;;
-l*=* | --libdir=*) libdir=`echo $1 | sed 's/[-a-z_]*=//'`; shift;;
-i*=* | --includedir=*) includedir=`echo $1 | sed 's/[-a-z_]*=//'`;shift;;
-p* | --p*) prefix="$2"; shift; shift;;
-e* | --e*) exec_prefix="$2"; shift; shift;;
-l* | --l*) libdir="$2"; shift; shift;;
-i* | --i*) includedir="$2"; shift; shift;;
-s* | --s*) shared=1; shift;;
-p* | --prefix) prefix="$2"; shift; shift;;
-e* | --eprefix) exec_prefix="$2"; shift; shift;;
-l* | --libdir) libdir="$2"; shift; shift;;
-i* | --includedir) includedir="$2"; shift; shift;;
-s* | --shared | --enable-shared) shared=1; shift;;
-z* | --zprefix) zprefix=1; shift;;
--sysconfdir=*) echo "ignored option: --sysconfdir"; shift;;
--localstatedir=*) echo "ignored option: --localstatedir"; shift;;
*) echo "unknown option: $1"; echo "$0 --help for help"; exit 1;;
esac
done
......@@ -73,10 +78,10 @@ esac
if test "$gcc" -eq 1 && ($cc -c $cflags $test.c) 2>/dev/null; then
CC="$cc"
SFLAGS=${CFLAGS-"-fPIC -O3"}
SFLAGS="${CFLAGS-"-O3"} -fPIC"
CFLAGS="$cflags"
case `(uname -s || echo unknown) 2>/dev/null` in
Linux | linux | GNU | GNU/*) LDSHARED=${LDSHARED-"$cc -shared -Wl,-soname,libz.so.1"};;
Linux | linux | GNU | GNU/*) LDSHARED=${LDSHARED-"$cc -shared -Wl,-soname,libz.so.1,--version-script,zlib.map"};;
CYGWIN* | Cygwin* | cygwin* | OS/2* )
EXE='.exe';;
QNX*) # This is for QNX6. I suppose that the QNX rule below is for QNX2,QNX4
......@@ -117,24 +122,30 @@ else
esac;;
IRIX*) SFLAGS=${CFLAGS-"-ansi -O2 -rpath ."}
CFLAGS=${CFLAGS-"-ansi -O2"}
LDSHARED=${LDSHARED-"cc -shared"};;
LDSHARED=${LDSHARED-"cc -shared -Wl,-soname,libz.so.1"};;
OSF1\ V4*) SFLAGS=${CFLAGS-"-O -std1"}
CFLAGS=${CFLAGS-"-O -std1"}
LDSHARED=${LDSHARED-"cc -shared -Wl,-soname,libz.so -Wl,-msym -Wl,-rpath,$(libdir) -Wl,-set_version,${VER}:1.0"};;
OSF1*) SFLAGS=${CFLAGS-"-O -std1"}
CFLAGS=${CFLAGS-"-O -std1"}
LDSHARED=${LDSHARED-"cc -shared"};;
LDSHARED=${LDSHARED-"cc -shared -Wl,-soname,libz.so.1"};;
QNX*) SFLAGS=${CFLAGS-"-4 -O"}
CFLAGS=${CFLAGS-"-4 -O"}
LDSHARED=${LDSHARED-"cc"}
RANLIB=${RANLIB-"true"}
AR="cc -A";;
AR_RC="cc -A";;
SCO_SV\ 3.2*) SFLAGS=${CFLAGS-"-O3 -dy -KPIC "}
CFLAGS=${CFLAGS-"-O3"}
LDSHARED=${LDSHARED-"cc -dy -KPIC -G"};;
SunOS\ 5*) SFLAGS=${CFLAGS-"-fast -xcg89 -KPIC -R."}
CFLAGS=${CFLAGS-"-fast -xcg89"}
LDSHARED=${LDSHARED-"cc -G"};;
SunOS\ 5*) LDSHARED=${LDSHARED-"cc -G"}
case `(uname -m || echo unknown) 2>/dev/null` in
i86*)
SFLAGS=${CFLAGS-"-xpentium -fast -KPIC -R."}
CFLAGS=${CFLAGS-"-xpentium -fast"};;
*)
SFLAGS=${CFLAGS-"-fast -xcg92 -KPIC -R."}
CFLAGS=${CFLAGS-"-fast -xcg92"};;
esac;;
SunOS\ 4*) SFLAGS=${CFLAGS-"-O2 -PIC"}
CFLAGS=${CFLAGS-"-O2"}
LDSHARED=${LDSHARED-"ld"};;
......@@ -180,6 +191,10 @@ if test $shared -eq 1; then
echo No shared library support.
shared=0;
else
echo Tested $CC -c $SFLAGS $test.c
$CC -c $SFLAGS $test.c
echo Tested $LDSHARED -o $test$shared_ext $test.o
$LDSHARED -o $test$shared_ext $test.o
echo 'No shared library support; try without defining CC and CFLAGS'
shared=0;
fi
......@@ -203,6 +218,12 @@ else
echo "Checking for unistd.h... No."
fi
if test $zprefix -eq 1; then
sed < zconf.h "/#ifdef Z_PREFIX/s/def Z_PREFIX/ 1/" > zconf.temp.h
mv zconf.temp.h zconf.h
echo "Using z_ prefix on all symbols."
fi
cat > $test.c <<EOF
#include <stdio.h>
#include <stdarg.h>
......@@ -219,7 +240,7 @@ int main()
EOF
if test "`($CC -c $CFLAGS $test.c) 2>&1`" = ""; then
echo "Checking whether to use vs[n]printf() or s[n]printf()... using vs[n]printf()"
echo "Checking whether to use vs[n]printf() or s[n]printf()... using vs[n]printf()."
cat > $test.c <<EOF
#include <stdio.h>
......@@ -316,7 +337,7 @@ EOF
fi
fi
else
echo "Checking whether to use vs[n]printf() or s[n]printf()... using s[n]printf()"
echo "Checking whether to use vs[n]printf() or s[n]printf()... using s[n]printf()."
cat >$test.c <<EOF
#include <stdio.h>
......@@ -447,7 +468,7 @@ sed < Makefile.in "
/^SHAREDLIB *=/s#=.*#=$SHAREDLIB#
/^SHAREDLIBV *=/s#=.*#=$SHAREDLIBV#
/^SHAREDLIBM *=/s#=.*#=$SHAREDLIBM#
/^AR *=/s#=.*#=$AR#
/^AR *=/s#=.*#=$AR_RC#
/^RANLIB *=/s#=.*#=$RANLIB#
/^EXE *=/s#=.*#=$EXE#
/^prefix *=/s#=.*#=$prefix#
......@@ -457,3 +478,25 @@ sed < Makefile.in "
/^mandir *=/s#=.*#=$mandir#
/^LDFLAGS *=/s#=.*#=$LDFLAGS#
" > Makefile
sed < zlib.pc.in "
/^CC *=/s#=.*#=$CC#
/^CFLAGS *=/s#=.*#=$CFLAGS#
/^CPP *=/s#=.*#=$CPP#
/^LDSHARED *=/s#=.*#=$LDSHARED#
/^LIBS *=/s#=.*#=$LIBS#
/^SHAREDLIB *=/s#=.*#=$SHAREDLIB#
/^SHAREDLIBV *=/s#=.*#=$SHAREDLIBV#
/^SHAREDLIBM *=/s#=.*#=$SHAREDLIBM#
/^AR *=/s#=.*#=$AR_RC#
/^RANLIB *=/s#=.*#=$RANLIB#
/^EXE *=/s#=.*#=$EXE#
/^prefix *=/s#=.*#=$prefix#
/^exec_prefix *=/s#=.*#=$exec_prefix#
/^libdir *=/s#=.*#=$libdir#
/^includedir *=/s#=.*#=$includedir#
/^mandir *=/s#=.*#=$mandir#
/^LDFLAGS *=/s#=.*#=$LDFLAGS#
" | sed -e "
s/\@VERSION\@/$VER/g;
" > zlib.pc
contrib/infback9/inftree9.c
浏览文件 @ b1c19ca6
......@@ -9,7 +9,7 @@
#define MAXBITS 15
const char inflate9_copyright[] =
" inflate9 1.2.3 Copyright 1995-2005 Mark Adler ";
" inflate9 1.2.3.1 Copyright 1995-2005 Mark Adler ";
/*
If you use the zlib library in a product, an acknowledgment is welcome
in the documentation of your product. If for some reason you cannot
......@@ -64,7 +64,7 @@ unsigned short FAR *work;
static const unsigned short lext[31] = { /* Length codes 257..285 extra */
128, 128, 128, 128, 128, 128, 128, 128, 129, 129, 129, 129,
130, 130, 130, 130, 131, 131, 131, 131, 132, 132, 132, 132,
133, 133, 133, 133, 144, 201, 196};
133, 133, 133, 133, 144, 74, 196};
static const unsigned short dbase[32] = { /* Distance codes 0..31 base */
1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49,
65, 97, 129, 193, 257, 385, 513, 769, 1025, 1537, 2049, 3073,
......
contrib/masmx86/inffas32.asm
浏览文件 @ b1c19ca6
......@@ -644,9 +644,9 @@ L_init_mmx:
movd mm0,ebp
mov ebp,ebx
; 896 "inffast.S"
movd mm4,[esp+0]
movd mm4,dword ptr [esp+0]
movq mm3,mm4
movd mm5,[esp+4]
movd mm5,dword ptr [esp+4]
movq mm2,mm5
pxor mm1,mm1
mov ebx, [esp+8]
......@@ -660,7 +660,7 @@ L_do_loop_mmx:
ja L_get_length_code_mmx
movd mm6,ebp
movd mm7,[esi]
movd mm7,dword ptr [esi]
add esi,4
psllq mm7,mm6
add ebp,32
......@@ -717,7 +717,7 @@ L_decode_distance_mmx:
ja L_get_dist_code_mmx
movd mm6,ebp
movd mm7,[esi]
movd mm7,dword ptr [esi]
add esi,4
psllq mm7,mm6
add ebp,32
......
contrib/vstudio/vc7/zlib.rc
浏览文件 @ b1c19ca6
......@@ -2,8 +2,8 @@
#define IDR_VERSION1 1
IDR_VERSION1 VERSIONINFO MOVEABLE IMPURE LOADONCALL DISCARDABLE
FILEVERSION 1,2,3,0
PRODUCTVERSION 1,2,3,0
FILEVERSION 1,2,3,1
PRODUCTVERSION 1,2,3,1
FILEFLAGSMASK VS_FFI_FILEFLAGSMASK
FILEFLAGS 0
FILEOS VOS_DOS_WINDOWS32
......@@ -17,7 +17,7 @@ BEGIN
BEGIN
VALUE "FileDescription", "zlib data compression library\0"
VALUE "FileVersion", "1.2.3.0\0"
VALUE "FileVersion", "1.2.3.1\0"
VALUE "InternalName", "zlib\0"
VALUE "OriginalFilename", "zlib.dll\0"
VALUE "ProductName", "ZLib.DLL\0"
......
deflate.c
浏览文件 @ b1c19ca6
......@@ -52,7 +52,7 @@
#include "deflate.h"
const char deflate_copyright[] =
" deflate 1.2.3 Copyright 1995-2005 Jean-loup Gailly ";
" deflate 1.2.3.1 Copyright 1995-2005 Jean-loup Gailly ";
/*
If you use the zlib library in a product, an acknowledgment is welcome
in the documentation of your product. If for some reason you cannot
......@@ -481,33 +481,65 @@ int ZEXPORT deflateTune(strm, good_length, max_lazy, nice_length, max_chain)
* resulting from using fixed blocks instead of stored blocks, which deflate
* can emit on compressed data for some combinations of the parameters.
*
* This function could be more sophisticated to provide closer upper bounds
* for every combination of windowBits and memLevel, as well as wrap.
* But even the conservative upper bound of about 14% expansion does not
* seem onerous for output buffer allocation.
* This function could be more sophisticated to provide closer upper bounds for
* every combination of windowBits and memLevel. But even the conservative
* upper bound of about 14% expansion does not seem onerous for output buffer
* allocation.
*/
uLong ZEXPORT deflateBound(strm, sourceLen)
z_streamp strm;
uLong sourceLen;
{
deflate_state *s;
uLong destLen;
uLong complen, wraplen;
Bytef *str;
/* conservative upper bound */
destLen = sourceLen +
((sourceLen + 7) >> 3) + ((sourceLen + 63) >> 6) + 11;
/* conservative upper bound for compressed data */
complen = sourceLen +
((sourceLen + 7) >> 3) + ((sourceLen + 63) >> 6) + 5;
/* if can't get parameters, return conservative bound */
/* if can't get parameters, return conservative bound plus zlib wrapper */
if (strm == Z_NULL || strm->state == Z_NULL)
return destLen;
return complen + 6;
/* if not default parameters, return conservative bound */
/* compute wrapper length */
s = strm->state;
switch (s->wrap) {
case 0: /* raw deflate */
wraplen = 0;
break;
case 1: /* zlib wrapper */
wraplen = 6 + (s->strstart ? 4 : 0);
break;
case 2: /* gzip wrapper */
wraplen = 18;
if (s->gzhead != NULL) { /* user-supplied gzip header */
if (s->gzhead->extra != NULL)
wraplen += 2 + s->gzhead->extra_len;
str = s->gzhead->name;
if (str != NULL)
do {
wraplen++;
} while (*str++);
str = s->gzhead->comment;
if (str != NULL)
do {
wraplen++;
} while (*str++);
if (s->gzhead->hcrc)
wraplen += 2;
}
break;
default: /* for compiler happiness */
wraplen = 6;
}
/* if not default parameters, return conservative bound */
if (s->w_bits != 15 || s->hash_bits != 8 + 7)
return destLen;
return complen + wraplen;
/* default settings: return tight bound for that case */
return compressBound(sourceLen);
return compressBound(sourceLen) - 6 + wraplen;
}
/* =========================================================================
......
deflate.h
浏览文件 @ b1c19ca6
/* deflate.h -- internal compression state
* Copyright (C) 1995-2004 Jean-loup Gailly
* Copyright (C) 1995-2005 Jean-loup Gailly
* For conditions of distribution and use, see copyright notice in zlib.h
*/
......
doc/rfc1950.txt 0 → 100644
浏览文件 @ b1c19ca6
此差异已折叠。
doc/rfc1951.txt 0 → 100644
浏览文件 @ b1c19ca6
此差异已折叠。
doc/rfc1952.txt 0 → 100644
浏览文件 @ b1c19ca6
此差异已折叠。
doc/txtvsbin.txt 0 → 100644
浏览文件 @ b1c19ca6
A Fast Method for Identifying Plain Text Files
==============================================
Introduction
------------
Given a file coming from an unknown source, it is sometimes desirable
to find out whether the format of that file is plain text. Although
this may appear like a simple task, a fully accurate detection of the
file type requires heavy-duty semantic analysis on the file contents.
It is, however, possible to obtain satisfactory results by employing
various heuristics.
Previous versions of PKZip and other zip-compatible compression tools
were using a crude detection scheme: if more than 80% (4/5) of the bytes
found in a certain buffer are within the range [7..127], the file is
labeled as plain text, otherwise it is labeled as binary. A prominent
limitation of this scheme is the restriction to Latin-based alphabets.
Other alphabets, like Greek, Cyrillic or Asian, make extensive use of
the bytes within the range [128..255], and texts using these alphabets
are most often misidentified by this scheme; in other words, the rate
of false negatives is sometimes too high, which means that the recall
is low. Another weakness of this scheme is a reduced precision, due to
the false positives that may occur when binary files containing large
amounts of textual characters are misidentified as plain text.
In this article we propose a new, simple detection scheme that features
a much increased precision and a near-100% recall. This scheme is
designed to work on ASCII, Unicode and other ASCII-derived alphabets,
and it handles single-byte encodings (ISO-8859, MacRoman, KOI8, etc.)
and variable-sized encodings (ISO-2022, UTF-8, etc.). Wider encodings
(UCS-2/UTF-16 and UCS-4/UTF-32) are not handled, however.
The Algorithm
-------------
The algorithm works by dividing the set of bytecodes [0..255] into three
categories:
- The white list of textual bytecodes:
9 (TAB), 10 (LF), 13 (CR), 32 (SPACE) to 255.
- The gray list of tolerated bytecodes:
7 (BEL), 8 (BS), 11 (VT), 12 (FF), 26 (SUB), 27 (ESC).
- The black list of undesired, non-textual bytecodes:
0 (NUL) to 6, 14 to 31.
If a file contains at least one byte that belongs to the white list and
no byte that belongs to the black list, then the file is categorized as
plain text; otherwise, it is categorized as binary. (The boundary case,
when the file is empty, automatically falls into the latter category.)
Rationale
---------
The idea behind this algorithm relies on two observations.
The first observation is that, although the full range of 7-bit codes
[0..127] is properly specified by the ASCII standard, most control
characters in the range [0..31] are not used in practice. The only
widely-used, almost universally-portable control codes are 9 (TAB),
10 (LF) and 13 (CR). There are a few more control codes that are
recognized on a reduced range of platforms and text viewers/editors:
7 (BEL), 8 (BS), 11 (VT), 12 (FF), 26 (SUB) and 27 (ESC); but these
codes are rarely (if ever) used alone, without being accompanied by
some printable text. Even the newer, portable text formats such as
XML avoid using control characters outside the list mentioned here.
The second observation is that most of the binary files tend to contain
control characters, especially 0 (NUL). Even though the older text
detection schemes observe the presence of non-ASCII codes from the range
[128..255], the precision rarely has to suffer if this upper range is
labeled as textual, because the files that are genuinely binary tend to
contain both control characters and codes from the upper range. On the
other hand, the upper range needs to be labeled as textual, because it
is used by virtually all ASCII extensions. In particular, this range is
used for encoding non-Latin scripts.
Since there is no counting involved, other than simply observing the
presence or the absence of some byte values, the algorithm produces
consistent results, regardless what alphabet encoding is being used.
(If counting were involved, it could be possible to obtain different
results on a text encoded, say, using ISO-8859-16 versus UTF-8.)
There is an extra category of plain text files that are "polluted" with
one or more black-listed codes, either by mistake or by peculiar design
considerations. In such cases, a scheme that tolerates a small fraction
of black-listed codes would provide an increased recall (i.e. more true
positives). This, however, incurs a reduced precision overall, since
false positives are more likely to appear in binary files that contain
large chunks of textual data. Furthermore, "polluted" plain text should
be regarded as binary by general-purpose text detection schemes, because
general-purpose text processing algorithms might not be applicable.
Under this premise, it is safe to say that our detection method provides
a near-100% recall.
Experiments have been run on many files coming from various platforms
and applications. We tried plain text files, system logs, source code,
formatted office documents, compiled object code, etc. The results
confirm the optimistic assumptions about the capabilities of this
algorithm.
--
Cosmin Truta
Last updated: 2006-May-28
example.c
浏览文件 @ b1c19ca6
/* example.c -- usage example of the zlib compression library
* Copyright (C) 1995-2004 Jean-loup Gailly.
* Copyright (C) 1995-2006 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
/* @(#) $Id$ */
#include <stdio.h>
#include "zlib.h"
#include <stdio.h>
#ifdef STDC
# include <string.h>
......
examples/gzlog.c
浏览文件 @ b1c19ca6
......@@ -241,7 +241,7 @@ int gzlog_write(void *obj, char *data, size_t len)
some = len;
if (write(log->fd, data, some) != some)
return 1;
log->crc = crc32(log->crc, data, some);
log->crc = crc32(log->crc, (unsigned char *)data, some);
log->len += some;
len -= some;
data += some;
......
examples/zlib_how.html
浏览文件 @ b1c19ca6
......@@ -4,7 +4,7 @@
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<title>zlib Usage Example</title>
<!-- Copyright (c) 2004 Mark Adler. -->
<!-- Copyright (c) 2004, 2005 Mark Adler. -->
</head>
<body bgcolor="#FFFFFF" text="#000000" link="#0000FF" vlink="#00A000">
<h2 align="center"> zlib Usage Example </h2>
......@@ -21,13 +21,16 @@ Without further adieu, here is the program <a href="zpipe.c"><tt>zpipe.c</tt></a
<pre><b>
/* zpipe.c: example of proper use of zlib's inflate() and deflate()
Not copyrighted -- provided to the public domain
Version 1.2 9 November 2004 Mark Adler */
Version 1.4 11 December 2005 Mark Adler */
/* Version history:
1.0 30 Oct 2004 First version
1.1 8 Nov 2004 Add void casting for unused return values
Use switch statement for inflate() return values
1.2 9 Nov 2004 Add assertions to document zlib guarantees
1.3 6 Apr 2005 Remove incorrect assertion in inf()
1.4 11 Dec 2005 Add hack to avoid MSDOS end-of-line conversions
Avoid some compiler warnings for input and output buffers
*/
</b></pre><!-- -->
We now include the header files for the required definitions. From
......@@ -47,6 +50,21 @@ functions <tt>inflateInit()</tt>, <tt>inflate()</tt>, and
#include &lt;assert.h&gt;
#include "zlib.h"
</b></pre><!-- -->
This is an ugly hack required to avoid corruption of the input and output data on
Windows/MS-DOS systems. Without this, those systems would assume that the input and output
files are text, and try to convert the end-of-line characters from one standard to
another. That would corrupt binary data, and in particular would render the compressed data unusable.
This sets the input and output to binary which suppresses the end-of-line conversions.
<tt>SET_BINARY_MODE()</tt> will be used later on <tt>stdin</tt> and <tt>stdout</tt>, at the beginning of <tt>main()</tt>.
<pre><b>
#if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__)
# include &lt;fcntl.h&gt;
# include &lt;io.h&gt;
# define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
#else
# define SET_BINARY_MODE(file)
#endif
</b></pre><!-- -->
<tt>CHUNK</tt> is simply the buffer size for feeding data to and pulling data
from the <em>zlib</em> routines. Larger buffer sizes would be more efficient,
especially for <tt>inflate()</tt>. If the memory is available, buffers sizes
......@@ -80,8 +98,8 @@ is used to pass information to and from the <em>zlib</em> routines, and to maint
int ret, flush;
unsigned have;
z_stream strm;
char in[CHUNK];
char out[CHUNK];
unsigned char in[CHUNK];
unsigned char out[CHUNK];
</b></pre><!-- -->
The first thing we do is to initialize the <em>zlib</em> state for compression using
<tt>deflateInit()</tt>. This must be done before the first use of <tt>deflate()</tt>.
......@@ -313,8 +331,8 @@ can tell from the <em>zlib</em> stream itself when the stream is complete.
int ret;
unsigned have;
z_stream strm;
char in[CHUNK];
char out[CHUNK];
unsigned char in[CHUNK];
unsigned char out[CHUNK];
</b></pre><!-- -->
The initialization of the state is the same, except that there is no compression level,
of course, and two more elements of the structure are initialized. <tt>avail_in</tt>
......@@ -494,6 +512,10 @@ int main(int argc, char **argv)
{
int ret;
/* avoid end-of-line conversions */
SET_BINARY_MODE(stdin);
SET_BINARY_MODE(stdout);
/* do compression if no arguments */
if (argc == 1) {
ret = def(stdin, stdout, Z_DEFAULT_COMPRESSION);
......@@ -518,6 +540,6 @@ int main(int argc, char **argv)
}
</b></pre>
<hr>
<i>Copyright (c) 2004 by Mark Adler<br>Last modified 13 November 2004</i>
<i>Copyright (c) 2004, 2005 by Mark Adler<br>Last modified 11 December 2005</i>
</body>
</html>
examples/zpipe.c
浏览文件 @ b1c19ca6
/* zpipe.c: example of proper use of zlib's inflate() and deflate()
Not copyrighted -- provided to the public domain
Version 1.2 9 November 2004 Mark Adler */
Version 1.4 11 December 2005 Mark Adler */
/* Version history:
1.0 30 Oct 2004 First version
......@@ -8,6 +8,8 @@
Use switch statement for inflate() return values
1.2 9 Nov 2004 Add assertions to document zlib guarantees
1.3 6 Apr 2005 Remove incorrect assertion in inf()
1.4 11 Dec 2005 Add hack to avoid MSDOS end-of-line conversions
Avoid some compiler warnings for input and output buffers
*/
#include <stdio.h>
......@@ -15,6 +17,14 @@
#include <assert.h>
#include "zlib.h"
#if defined(MSDOS) || defined(OS2) || defined(WIN32) || defined(__CYGWIN__)
# include <fcntl.h>
# include <io.h>
# define SET_BINARY_MODE(file) setmode(fileno(file), O_BINARY)
#else
# define SET_BINARY_MODE(file)
#endif
#define CHUNK 16384
/* Compress from file source to file dest until EOF on source.
......@@ -28,8 +38,8 @@ int def(FILE *source, FILE *dest, int level)
int ret, flush;
unsigned have;
z_stream strm;
char in[CHUNK];
char out[CHUNK];
unsigned char in[CHUNK];
unsigned char out[CHUNK];
/* allocate deflate state */
strm.zalloc = Z_NULL;
......@@ -84,8 +94,8 @@ int inf(FILE *source, FILE *dest)
int ret;
unsigned have;
z_stream strm;
char in[CHUNK];
char out[CHUNK];
unsigned char in[CHUNK];
unsigned char out[CHUNK];
/* allocate inflate state */
strm.zalloc = Z_NULL;
......@@ -167,6 +177,10 @@ int main(int argc, char **argv)
{
int ret;
/* avoid end-of-line conversions */
SET_BINARY_MODE(stdin);
SET_BINARY_MODE(stdout);
/* do compression if no arguments */
if (argc == 1) {
ret = def(stdin, stdout, Z_DEFAULT_COMPRESSION);
......
examples/zran.c
浏览文件 @ b1c19ca6
......@@ -351,7 +351,7 @@ int main(int argc, char **argv)
int len;
off_t offset;
FILE *in;
struct access *index;
struct access *index = NULL;
unsigned char buf[CHUNK];
/* open input file */
......
gzio.c
浏览文件 @ b1c19ca6
/* gzio.c -- IO on .gz files
* Copyright (C) 1995-2005 Jean-loup Gailly.
* Copyright (C) 1995-2006 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*
* Compile this file with -DNO_GZCOMPRESS to avoid the compression code.
......@@ -7,9 +7,8 @@
/* @(#) $Id$ */
#include <stdio.h>
#include "zutil.h"
#include <stdio.h>
#ifdef NO_DEFLATE /* for compatibility with old definition */
# define NO_GZCOMPRESS
......@@ -187,7 +186,10 @@ local gzFile gz_open (path, mode, fd)
/* Write a very simple .gz header:
*/
fprintf(s->file, "%c%c%c%c%c%c%c%c%c%c", gz_magic[0], gz_magic[1],
Z_DEFLATED, 0 /*flags*/, 0,0,0,0 /*time*/, 0 /*xflags*/, OS_CODE);
Z_DEFLATED, 0 /*flags*/, 0,0,0,0 /*time*/, level == 9 ? 2 :
(strategy >= Z_HUFFMAN_ONLY ||
(level != Z_DEFAULT_COMPRESSION && level < 2) ?
4 : 0) /*xflags*/, OS_CODE);
s->start = 10L;
/* We use 10L instead of ftell(s->file) to because ftell causes an
* fflush on some systems. This version of the library doesn't use
......@@ -256,7 +258,7 @@ int ZEXPORT gzsetparams (file, level, strategy)
/* ===========================================================================
Read a byte from a gz_stream; update next_in and avail_in. Return EOF
for end of file.
IN assertion: the stream s has been sucessfully opened for reading.
IN assertion: the stream s has been successfully opened for reading.
*/
local int get_byte(s)
gz_stream *s;
......@@ -281,7 +283,7 @@ local int get_byte(s)
mode to transparent if the gzip magic header is not present; set s->err
to Z_DATA_ERROR if the magic header is present but the rest of the header
is incorrect.
IN assertion: the stream s has already been created sucessfully;
IN assertion: the stream s has already been created successfully;
s->stream.avail_in is zero for the first time, but may be non-zero
for concatenated .gz files.
*/
......@@ -301,6 +303,7 @@ local void check_header(s)
if (len) s->inbuf[0] = s->stream.next_in[0];
errno = 0;
len = (uInt)fread(s->inbuf + len, 1, Z_BUFSIZE >> len, s->file);
if (len == 0) s->z_eof = 1;
if (len == 0 && ferror(s->file)) s->z_err = Z_ERRNO;
s->stream.avail_in += len;
s->stream.next_in = s->inbuf;
......@@ -436,7 +439,7 @@ int ZEXPORT gzread (file, buf, len)
s->stream.avail_out -= n;
s->stream.avail_in -= n;
}
if (s->stream.avail_out > 0) {
if (s->stream.avail_out > 0 && !feof(s->file)) {
s->stream.avail_out -=
(uInt)fread(next_out, 1, s->stream.avail_out, s->file);
}
......@@ -971,7 +974,7 @@ int ZEXPORT gzclose (file)
return destroy((gz_stream*)file);
}
#ifdef STDC
#if defined(STDC) && !defined(_WIN32_WCE)
# define zstrerror(errnum) strerror(errnum)
#else
# define zstrerror(errnum) ""
......
inflate.h
浏览文件 @ b1c19ca6
/* inflate.h -- internal inflate state definition
* Copyright (C) 1995-2004 Mark Adler
* Copyright (C) 1995-2006 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
......@@ -73,7 +73,7 @@ typedef enum {
CHECK -> LENGTH -> DONE
*/
/* state maintained between inflate() calls. Approximately 7K bytes. */
/* state maintained between inflate() calls. Approximately 10K bytes. */
struct inflate_state {
inflate_mode mode; /* current inflate mode */
int last; /* true if processing last block */
......
inftrees.c
浏览文件 @ b1c19ca6
......@@ -9,7 +9,7 @@
#define MAXBITS 15
const char inflate_copyright[] =
" inflate 1.2.3 Copyright 1995-2005 Mark Adler ";
" inflate 1.2.3.1 Copyright 1995-2005 Mark Adler ";
/*
If you use the zlib library in a product, an acknowledgment is welcome
in the documentation of your product. If for some reason you cannot
......@@ -62,7 +62,7 @@ unsigned short FAR *work;
35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
static const unsigned short lext[31] = { /* Length codes 257..285 extra */
16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 201, 196};
19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 74, 196};
static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
......
make_vms.com
浏览文件 @ b1c19ca6
$! make libz under VMS written by
$! Martin P.J. Zinser
$! <zinser@zinser.no-ip.info or zinser@sysdev.deutsche-boerse.com>
$!
$! In case of problems with the install you might contact me at
$! zinser@zinser.no-ip.info(preferred) or
$! zinser@sysdev.deutsche-boerse.com (work)
$!
$! Make procedure history for Zlib
$!
$!------------------------------------------------------------------------------
$! Version history
$! 0.01 20060120 First version to receive a number
$!
$ on error then goto err_exit
$!
......@@ -10,7 +19,10 @@ $!
$ true = 1
$ false = 0
$ tmpnam = "temp_" + f$getjpi("","pid")
$ SAY = "WRITE SYS$OUTPUT"
$ its_decc = false
$ its_vaxc = false
$ its_gnuc = false
$ s_case = False
$!
$! Setup variables holding "config" information
$!
......@@ -21,13 +33,11 @@ $ v_string = "ZLIB_VERSION"
$ v_file = "zlib.h"
$ ccopt = ""
$ lopts = ""
$ dnsrl = ""
$ linkonly = false
$ optfile = name + ".opt"
$ its_decc = false
$ its_vaxc = false
$ its_gnuc = false
$ axp = f$getsyi("HW_MODEL").ge.1024
$ s_case = false
$!
$! Check for MMK/MMS
$!
$ If F$Search ("Sys$System:MMS.EXE") .nes. "" Then Make = "MMS"
......@@ -107,7 +117,7 @@ $ call make minigzip.exe -
$ endif
$ else
$ gosub crea_mms
$ SAY "Make ''name' ''version' with ''Make' "
$ write sys$output "Make ''name' ''version' with ''Make' "
$ 'make'
$ endif
$!
......@@ -133,6 +143,7 @@ $ write sys$output "C compiler required to build ''name'"
$ goto err_exit
$ERR_EXIT:
$ set message/facil/ident/sever/text
$ close/nolog optf
$ write sys$output "Exiting..."
$ exit 2
$!
......@@ -244,6 +255,9 @@ $!------------------------------------------------------------------------------
$!
$! Look for the compiler used
$!
$! Version history
$! 0.01 20040223 First version to receive a number
$! 0.02 20040229 Save/set value of decc$no_rooted_search_lists
$CHECK_COMPILER:
$ if (.not. (its_decc .or. its_vaxc .or. its_gnuc))
$ then
......@@ -257,9 +271,20 @@ $!
$ if (.not. (its_decc .or. its_vaxc .or. its_gnuc))
$ then goto CC_ERR
$ else
$ if its_decc then write sys$output "CC compiler check ... Compaq C"
$ if its_vaxc then write sys$output "CC compiler check ... VAX C"
$ if its_gnuc then write sys$output "CC compiler check ... GNU C"
$ if its_decc
$ then
$ write sys$output "CC compiler check ... Compaq C"
$ if f$trnlnm("decc$no_rooted_search_lists") .nes. ""
$ then
$ dnrsl = f$trnlnm("decc$no_rooted_search_lists")
$ endif
$ define decc$no_rooted_search_lists 1
$ else
$ if its_vaxc then write sys$output "CC compiler check ... VAX C"
$ if its_gnuc then write sys$output "CC compiler check ... GNU C"
$ if f$trnlnm(topt) then write topt "sys$share:vaxcrtl.exe/share"
$ if f$trnlnm(optf) then write optf "sys$share:vaxcrtl.exe/share"
$ endif
$ endif
$ return
$!------------------------------------------------------------------------------
......@@ -382,17 +407,23 @@ $ close h_in
$ return
$!------------------------------------------------------------------------------
$!
$! Analyze Object files for OpenVMS AXP to extract Procedure and Data
$! Analyze Object files for OpenVMS AXP to extract Procedure and Data
$! information to build a symbol vector for a shareable image
$! All the "brains" of this logic was suggested by Hartmut Becker
$! (Hartmut.Becker@compaq.com). All the bugs were introduced by me
$! (zinser@decus.de), so if you do have problem reports please do not
$! (zinser@zinser.no-ip.info), so if you do have problem reports please do not
$! bother Hartmut/HP, but get in touch with me
$!
$ ANAL_OBJ_AXP: Subroutine
$! Version history
$! 0.01 20040406 Skip over shareable images in option file
$! 0.02 20041109 Fix option file for shareable images with case_sensitive=YES
$! 0.03 20050107 Skip over Identification labels in option file
$! 0.04 20060117 Add uppercase alias to code compiled with /name=as_is
$!
$ ANAL_OBJ_AXP: Subroutine
$ V = 'F$Verify(0)
$ SAY := "WRITE_ SYS$OUTPUT"
$
$
$ IF F$SEARCH("''P1'") .EQS. ""
$ THEN
$ SAY "ANAL_OBJ_AXP-E-NOSUCHFILE: Error, inputfile ''p1' not available"
......@@ -409,6 +440,17 @@ $ create a.tmp
$ open/append atmp a.tmp
$ loop:
$ read/end=end_loop in line
$ if f$locate("/SHARE",f$edit(line,"upcase")) .lt. f$length(line)
$ then
$ write sys$output "ANAL_SKP_SHR-i-skipshare, ''line'"
$ goto loop
$ endif
$ if f$locate("IDENTIFICATION=",f$edit(line,"upcase")) .lt. f$length(line)
$ then
$ write sys$output "ANAL_OBJ_AXP-i-ident: Identification ", -
f$element(1,"=",line)
$ goto loop
$ endif
$ f= f$search(line)
$ if f .eqs. ""
$ then
......@@ -450,12 +492,35 @@ $ edito/edt/command=sys$input f.tmp
sub/symbol: "/symbol_vector=(/whole
sub/"/=DATA)/whole
exit
$ sort/nodupl d.tmp,f.tmp 'p2'
$ delete a.tmp;*,b.tmp;*,c.tmp;*,d.tmp;*,e.tmp;*,f.tmp;*
$ sort/nodupl d.tmp,f.tmp g.tmp
$ open/read raw_vector g.tmp
$ open/write case_vector 'p2'
$ RAWLOOP:
$ read/end=end_rawloop raw_vector raw_element
$ write case_vector raw_element
$ if f$locate("=PROCEDURE)",raw_element) .lt. f$length(raw_element)
$ then
$ name = f$element(1,"=",raw_element) - "("
$ if f$edit(name,"UPCASE") .nes. name then -
write case_vector f$fao(" symbol_vector=(!AS/!AS=PROCEDURE)", -
f$edit(name,"UPCASE"), name)
$ endif
$ if f$locate("=DATA)",raw_element) .lt. f$length(raw_element)
$ then
$ name = f$element(1,"=",raw_element) - "("
$ if f$edit(name,"UPCASE") .nes. name then -
write case_vector f$fao(" symbol_vector=(!AS/!AS=DATA)", -
f$edit(name,"UPCASE"), name)
$ endif
$ goto rawloop
$ END_RAWLOOP:
$ close raw_vector
$ close case_vector
$ delete a.tmp;*,b.tmp;*,c.tmp;*,d.tmp;*,e.tmp;*,f.tmp;*,g.tmp;*
$ if f$search("x.tmp") .nes. "" -
then $ delete x.tmp;*
$!
$ EXIT_AA:
$ if V then set verify
$ endsubroutine
$ endsubroutine
$!------------------------------------------------------------------------------
minigzip.c
浏览文件 @ b1c19ca6
/* minigzip.c -- simulate gzip using the zlib compression library
* Copyright (C) 1995-2005 Jean-loup Gailly.
* Copyright (C) 1995-2006 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
......@@ -15,8 +15,8 @@
/* @(#) $Id$ */
#include <stdio.h>
#include "zlib.h"
#include <stdio.h>
#ifdef STDC
# include <string.h>
......
projects/visualc6/example.dsp
浏览文件 @ b1c19ca6
......@@ -17,14 +17,14 @@ CFG=example - Win32 LIB Debug
!MESSAGE
!MESSAGE Possible choices for configuration are:
!MESSAGE
!MESSAGE "example - Win32 DLL Release" (based on "Win32 (x86) Console Application")
!MESSAGE "example - Win32 DLL Debug" (based on "Win32 (x86) Console Application")
!MESSAGE "example - Win32 DLL ASM Release" (based on "Win32 (x86) Console Application")
!MESSAGE "example - Win32 DLL ASM Debug" (based on "Win32 (x86) Console Application")
!MESSAGE "example - Win32 LIB Release" (based on "Win32 (x86) Console Application")
!MESSAGE "example - Win32 LIB Debug" (based on "Win32 (x86) Console Application")
!MESSAGE "example - Win32 DLL Release" (based on "Win32 (x86) Console Application")
!MESSAGE "example - Win32 DLL Debug" (based on "Win32 (x86) Console Application")
!MESSAGE "example - Win32 LIB ASM Release" (based on "Win32 (x86) Console Application")
!MESSAGE "example - Win32 LIB ASM Debug" (based on "Win32 (x86) Console Application")
!MESSAGE "example - Win32 LIB Release" (based on "Win32 (x86) Console Application")
!MESSAGE "example - Win32 LIB Debug" (based on "Win32 (x86) Console Application")
!MESSAGE
# Begin Project
......@@ -34,22 +34,22 @@ CFG=example - Win32 LIB Debug
CPP=cl.exe
RSC=rc.exe
!IF "$(CFG)" == "example - Win32 DLL Release"
!IF "$(CFG)" == "example - Win32 DLL ASM Release"
# PROP BASE Use_MFC 0
# PROP BASE Use_Debug_Libraries 0
# PROP BASE Output_Dir "example___Win32_DLL_Release"
# PROP BASE Intermediate_Dir "example___Win32_DLL_Release"
# PROP BASE Output_Dir "example___Win32_DLL_ASM_Release"
# PROP BASE Intermediate_Dir "example___Win32_DLL_ASM_Release"
# PROP BASE Target_Dir ""
# PROP Use_MFC 0
# PROP Use_Debug_Libraries 0
# PROP Output_Dir "Win32_DLL_Release"
# PROP Intermediate_Dir "Win32_DLL_Release"
# PROP Output_Dir "Win32_DLL_ASM_Release"
# PROP Intermediate_Dir "Win32_DLL_ASM_Release"
# PROP Ignore_Export_Lib 0
# PROP Target_Dir ""
# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
# SUBTRACT BASE CPP /YX
# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
# SUBTRACT CPP /YX
# ADD BASE RSC /l 0x409 /d "NDEBUG"
# ADD RSC /l 0x409 /d "NDEBUG"
......@@ -60,22 +60,22 @@ LINK32=link.exe
# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
# ADD LINK32 /nologo /subsystem:console /machine:I386
!ELSEIF "$(CFG)" == "example - Win32 DLL Debug"
!ELSEIF "$(CFG)" == "example - Win32 DLL ASM Debug"
# PROP BASE Use_MFC 0
# PROP BASE Use_Debug_Libraries 1
# PROP BASE Output_Dir "example___Win32_DLL_Debug"
# PROP BASE Intermediate_Dir "example___Win32_DLL_Debug"
# PROP BASE Output_Dir "example___Win32_DLL_ASM_Debug"
# PROP BASE Intermediate_Dir "example___Win32_DLL_ASM_Debug"
# PROP BASE Target_Dir ""
# PROP Use_MFC 0
# PROP Use_Debug_Libraries 1
# PROP Output_Dir "Win32_DLL_Debug"
# PROP Intermediate_Dir "Win32_DLL_Debug"
# PROP Output_Dir "Win32_DLL_ASM_Debug"
# PROP Intermediate_Dir "Win32_DLL_ASM_Debug"
# PROP Ignore_Export_Lib 0
# PROP Target_Dir ""
# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
# SUBTRACT BASE CPP /YX
# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
# SUBTRACT CPP /YX
# ADD BASE RSC /l 0x409 /d "_DEBUG"
# ADD RSC /l 0x409 /d "_DEBUG"
......@@ -86,22 +86,22 @@ LINK32=link.exe
# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
!ELSEIF "$(CFG)" == "example - Win32 DLL ASM Release"
!ELSEIF "$(CFG)" == "example - Win32 DLL Release"
# PROP BASE Use_MFC 0
# PROP BASE Use_Debug_Libraries 0
# PROP BASE Output_Dir "example___Win32_DLL_ASM_Release"
# PROP BASE Intermediate_Dir "example___Win32_DLL_ASM_Release"
# PROP BASE Output_Dir "example___Win32_DLL_Release"
# PROP BASE Intermediate_Dir "example___Win32_DLL_Release"
# PROP BASE Target_Dir ""
# PROP Use_MFC 0
# PROP Use_Debug_Libraries 0
# PROP Output_Dir "Win32_DLL_ASM_Release"
# PROP Intermediate_Dir "Win32_DLL_ASM_Release"
# PROP Output_Dir "Win32_DLL_Release"
# PROP Intermediate_Dir "Win32_DLL_Release"
# PROP Ignore_Export_Lib 0
# PROP Target_Dir ""
# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
# SUBTRACT BASE CPP /YX
# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
# SUBTRACT CPP /YX
# ADD BASE RSC /l 0x409 /d "NDEBUG"
# ADD RSC /l 0x409 /d "NDEBUG"
......@@ -112,22 +112,22 @@ LINK32=link.exe
# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
# ADD LINK32 /nologo /subsystem:console /machine:I386
!ELSEIF "$(CFG)" == "example - Win32 DLL ASM Debug"
!ELSEIF "$(CFG)" == "example - Win32 DLL Debug"
# PROP BASE Use_MFC 0
# PROP BASE Use_Debug_Libraries 1
# PROP BASE Output_Dir "example___Win32_DLL_ASM_Debug"
# PROP BASE Intermediate_Dir "example___Win32_DLL_ASM_Debug"
# PROP BASE Output_Dir "example___Win32_DLL_Debug"
# PROP BASE Intermediate_Dir "example___Win32_DLL_Debug"
# PROP BASE Target_Dir ""
# PROP Use_MFC 0
# PROP Use_Debug_Libraries 1
# PROP Output_Dir "Win32_DLL_ASM_Debug"
# PROP Intermediate_Dir "Win32_DLL_ASM_Debug"
# PROP Output_Dir "Win32_DLL_Debug"
# PROP Intermediate_Dir "Win32_DLL_Debug"
# PROP Ignore_Export_Lib 0
# PROP Target_Dir ""
# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
# SUBTRACT BASE CPP /YX
# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
# SUBTRACT CPP /YX
# ADD BASE RSC /l 0x409 /d "_DEBUG"
# ADD RSC /l 0x409 /d "_DEBUG"
......@@ -138,22 +138,22 @@ LINK32=link.exe
# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
!ELSEIF "$(CFG)" == "example - Win32 LIB Release"
!ELSEIF "$(CFG)" == "example - Win32 LIB ASM Release"
# PROP BASE Use_MFC 0
# PROP BASE Use_Debug_Libraries 0
# PROP BASE Output_Dir "example___Win32_LIB_Release"
# PROP BASE Intermediate_Dir "example___Win32_LIB_Release"
# PROP BASE Output_Dir "example___Win32_LIB_ASM_Release"
# PROP BASE Intermediate_Dir "example___Win32_LIB_ASM_Release"
# PROP BASE Target_Dir ""
# PROP Use_MFC 0
# PROP Use_Debug_Libraries 0
# PROP Output_Dir "Win32_LIB_Release"
# PROP Intermediate_Dir "Win32_LIB_Release"
# PROP Output_Dir "Win32_LIB_ASM_Release"
# PROP Intermediate_Dir "Win32_LIB_ASM_Release"
# PROP Ignore_Export_Lib 0
# PROP Target_Dir ""
# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
# SUBTRACT BASE CPP /YX
# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
# SUBTRACT CPP /YX
# ADD BASE RSC /l 0x409 /d "NDEBUG"
# ADD RSC /l 0x409 /d "NDEBUG"
......@@ -164,22 +164,22 @@ LINK32=link.exe
# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
# ADD LINK32 /nologo /subsystem:console /machine:I386
!ELSEIF "$(CFG)" == "example - Win32 LIB Debug"
!ELSEIF "$(CFG)" == "example - Win32 LIB ASM Debug"
# PROP BASE Use_MFC 0
# PROP BASE Use_Debug_Libraries 1
# PROP BASE Output_Dir "example___Win32_LIB_Debug"
# PROP BASE Intermediate_Dir "example___Win32_LIB_Debug"
# PROP BASE Output_Dir "example___Win32_LIB_ASM_Debug"
# PROP BASE Intermediate_Dir "example___Win32_LIB_ASM_Debug"
# PROP BASE Target_Dir ""
# PROP Use_MFC 0
# PROP Use_Debug_Libraries 1
# PROP Output_Dir "Win32_LIB_Debug"
# PROP Intermediate_Dir "Win32_LIB_Debug"
# PROP Output_Dir "Win32_LIB_ASM_Debug"
# PROP Intermediate_Dir "Win32_LIB_ASM_Debug"
# PROP Ignore_Export_Lib 0
# PROP Target_Dir ""
# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
# SUBTRACT BASE CPP /YX
# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
# SUBTRACT CPP /YX
# ADD BASE RSC /l 0x409 /d "_DEBUG"
# ADD RSC /l 0x409 /d "_DEBUG"
......@@ -190,22 +190,22 @@ LINK32=link.exe
# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
!ELSEIF "$(CFG)" == "example - Win32 LIB ASM Release"
!ELSEIF "$(CFG)" == "example - Win32 LIB Release"
# PROP BASE Use_MFC 0
# PROP BASE Use_Debug_Libraries 0
# PROP BASE Output_Dir "example___Win32_LIB_ASM_Release"
# PROP BASE Intermediate_Dir "example___Win32_LIB_ASM_Release"
# PROP BASE Output_Dir "example___Win32_LIB_Release"
# PROP BASE Intermediate_Dir "example___Win32_LIB_Release"
# PROP BASE Target_Dir ""
# PROP Use_MFC 0
# PROP Use_Debug_Libraries 0
# PROP Output_Dir "Win32_LIB_ASM_Release"
# PROP Intermediate_Dir "Win32_LIB_ASM_Release"
# PROP Output_Dir "Win32_LIB_Release"
# PROP Intermediate_Dir "Win32_LIB_Release"
# PROP Ignore_Export_Lib 0
# PROP Target_Dir ""
# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
# SUBTRACT BASE CPP /YX
# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
# SUBTRACT CPP /YX
# ADD BASE RSC /l 0x409 /d "NDEBUG"
# ADD RSC /l 0x409 /d "NDEBUG"
......@@ -216,22 +216,22 @@ LINK32=link.exe
# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
# ADD LINK32 /nologo /subsystem:console /machine:I386
!ELSEIF "$(CFG)" == "example - Win32 LIB ASM Debug"
!ELSEIF "$(CFG)" == "example - Win32 LIB Debug"
# PROP BASE Use_MFC 0
# PROP BASE Use_Debug_Libraries 1
# PROP BASE Output_Dir "example___Win32_LIB_ASM_Debug"
# PROP BASE Intermediate_Dir "example___Win32_LIB_ASM_Debug"
# PROP BASE Output_Dir "example___Win32_LIB_Debug"
# PROP BASE Intermediate_Dir "example___Win32_LIB_Debug"
# PROP BASE Target_Dir ""
# PROP Use_MFC 0
# PROP Use_Debug_Libraries 1
# PROP Output_Dir "Win32_LIB_ASM_Debug"
# PROP Intermediate_Dir "Win32_LIB_ASM_Debug"
# PROP Output_Dir "Win32_LIB_Debug"
# PROP Intermediate_Dir "Win32_LIB_Debug"
# PROP Ignore_Export_Lib 0
# PROP Target_Dir ""
# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
# SUBTRACT BASE CPP /YX
# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
# SUBTRACT CPP /YX
# ADD BASE RSC /l 0x409 /d "_DEBUG"
# ADD RSC /l 0x409 /d "_DEBUG"
......@@ -246,14 +246,14 @@ LINK32=link.exe
# Begin Target
# Name "example - Win32 DLL Release"
# Name "example - Win32 DLL Debug"
# Name "example - Win32 DLL ASM Release"
# Name "example - Win32 DLL ASM Debug"
# Name "example - Win32 LIB Release"
# Name "example - Win32 LIB Debug"
# Name "example - Win32 DLL Release"
# Name "example - Win32 DLL Debug"
# Name "example - Win32 LIB ASM Release"
# Name "example - Win32 LIB ASM Debug"
# Name "example - Win32 LIB Release"
# Name "example - Win32 LIB Debug"
# Begin Group "Source Files"
# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
......
projects/visualc6/minigzip.dsp
浏览文件 @ b1c19ca6
......@@ -17,14 +17,14 @@ CFG=minigzip - Win32 LIB Debug
!MESSAGE
!MESSAGE Possible choices for configuration are:
!MESSAGE
!MESSAGE "minigzip - Win32 DLL Release" (based on "Win32 (x86) Console Application")
!MESSAGE "minigzip - Win32 DLL Debug" (based on "Win32 (x86) Console Application")
!MESSAGE "minigzip - Win32 DLL ASM Release" (based on "Win32 (x86) Console Application")
!MESSAGE "minigzip - Win32 DLL ASM Debug" (based on "Win32 (x86) Console Application")
!MESSAGE "minigzip - Win32 LIB Release" (based on "Win32 (x86) Console Application")
!MESSAGE "minigzip - Win32 LIB Debug" (based on "Win32 (x86) Console Application")
!MESSAGE "minigzip - Win32 DLL Release" (based on "Win32 (x86) Console Application")
!MESSAGE "minigzip - Win32 DLL Debug" (based on "Win32 (x86) Console Application")
!MESSAGE "minigzip - Win32 LIB ASM Release" (based on "Win32 (x86) Console Application")
!MESSAGE "minigzip - Win32 LIB ASM Debug" (based on "Win32 (x86) Console Application")
!MESSAGE "minigzip - Win32 LIB Release" (based on "Win32 (x86) Console Application")
!MESSAGE "minigzip - Win32 LIB Debug" (based on "Win32 (x86) Console Application")
!MESSAGE
# Begin Project
......@@ -34,22 +34,22 @@ CFG=minigzip - Win32 LIB Debug
CPP=cl.exe
RSC=rc.exe
!IF "$(CFG)" == "minigzip - Win32 DLL Release"
!IF "$(CFG)" == "minigzip - Win32 DLL ASM Release"
# PROP BASE Use_MFC 0
# PROP BASE Use_Debug_Libraries 0
# PROP BASE Output_Dir "minigzip___Win32_DLL_Release"
# PROP BASE Intermediate_Dir "minigzip___Win32_DLL_Release"
# PROP BASE Output_Dir "minigzip___Win32_DLL_ASM_Release"
# PROP BASE Intermediate_Dir "minigzip___Win32_DLL_ASM_Release"
# PROP BASE Target_Dir ""
# PROP Use_MFC 0
# PROP Use_Debug_Libraries 0
# PROP Output_Dir "Win32_DLL_Release"
# PROP Intermediate_Dir "Win32_DLL_Release"
# PROP Output_Dir "Win32_DLL_ASM_Release"
# PROP Intermediate_Dir "Win32_DLL_ASM_Release"
# PROP Ignore_Export_Lib 0
# PROP Target_Dir ""
# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
# SUBTRACT BASE CPP /YX
# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
# SUBTRACT CPP /YX
# ADD BASE RSC /l 0x409 /d "NDEBUG"
# ADD RSC /l 0x409 /d "NDEBUG"
......@@ -60,22 +60,22 @@ LINK32=link.exe
# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
# ADD LINK32 /nologo /subsystem:console /machine:I386
!ELSEIF "$(CFG)" == "minigzip - Win32 DLL Debug"
!ELSEIF "$(CFG)" == "minigzip - Win32 DLL ASM Debug"
# PROP BASE Use_MFC 0
# PROP BASE Use_Debug_Libraries 1
# PROP BASE Output_Dir "minigzip___Win32_DLL_Debug"
# PROP BASE Intermediate_Dir "minigzip___Win32_DLL_Debug"
# PROP BASE Output_Dir "minigzip___Win32_DLL_ASM_Debug"
# PROP BASE Intermediate_Dir "minigzip___Win32_DLL_ASM_Debug"
# PROP BASE Target_Dir ""
# PROP Use_MFC 0
# PROP Use_Debug_Libraries 1
# PROP Output_Dir "Win32_DLL_Debug"
# PROP Intermediate_Dir "Win32_DLL_Debug"
# PROP Output_Dir "Win32_DLL_ASM_Debug"
# PROP Intermediate_Dir "Win32_DLL_ASM_Debug"
# PROP Ignore_Export_Lib 0
# PROP Target_Dir ""
# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
# SUBTRACT BASE CPP /YX
# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
# SUBTRACT CPP /YX
# ADD BASE RSC /l 0x409 /d "_DEBUG"
# ADD RSC /l 0x409 /d "_DEBUG"
......@@ -86,22 +86,22 @@ LINK32=link.exe
# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
!ELSEIF "$(CFG)" == "minigzip - Win32 DLL ASM Release"
!ELSEIF "$(CFG)" == "minigzip - Win32 DLL Release"
# PROP BASE Use_MFC 0
# PROP BASE Use_Debug_Libraries 0
# PROP BASE Output_Dir "minigzip___Win32_DLL_ASM_Release"
# PROP BASE Intermediate_Dir "minigzip___Win32_DLL_ASM_Release"
# PROP BASE Output_Dir "minigzip___Win32_DLL_Release"
# PROP BASE Intermediate_Dir "minigzip___Win32_DLL_Release"
# PROP BASE Target_Dir ""
# PROP Use_MFC 0
# PROP Use_Debug_Libraries 0
# PROP Output_Dir "Win32_DLL_ASM_Release"
# PROP Intermediate_Dir "Win32_DLL_ASM_Release"
# PROP Output_Dir "Win32_DLL_Release"
# PROP Intermediate_Dir "Win32_DLL_Release"
# PROP Ignore_Export_Lib 0
# PROP Target_Dir ""
# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
# SUBTRACT BASE CPP /YX
# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
# SUBTRACT CPP /YX
# ADD BASE RSC /l 0x409 /d "NDEBUG"
# ADD RSC /l 0x409 /d "NDEBUG"
......@@ -112,22 +112,22 @@ LINK32=link.exe
# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
# ADD LINK32 /nologo /subsystem:console /machine:I386
!ELSEIF "$(CFG)" == "minigzip - Win32 DLL ASM Debug"
!ELSEIF "$(CFG)" == "minigzip - Win32 DLL Debug"
# PROP BASE Use_MFC 0
# PROP BASE Use_Debug_Libraries 1
# PROP BASE Output_Dir "minigzip___Win32_DLL_ASM_Debug"
# PROP BASE Intermediate_Dir "minigzip___Win32_DLL_ASM_Debug"
# PROP BASE Output_Dir "minigzip___Win32_DLL_Debug"
# PROP BASE Intermediate_Dir "minigzip___Win32_DLL_Debug"
# PROP BASE Target_Dir ""
# PROP Use_MFC 0
# PROP Use_Debug_Libraries 1
# PROP Output_Dir "Win32_DLL_ASM_Debug"
# PROP Intermediate_Dir "Win32_DLL_ASM_Debug"
# PROP Output_Dir "Win32_DLL_Debug"
# PROP Intermediate_Dir "Win32_DLL_Debug"
# PROP Ignore_Export_Lib 0
# PROP Target_Dir ""
# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
# SUBTRACT BASE CPP /YX
# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
# SUBTRACT CPP /YX
# ADD BASE RSC /l 0x409 /d "_DEBUG"
# ADD RSC /l 0x409 /d "_DEBUG"
......@@ -138,22 +138,22 @@ LINK32=link.exe
# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
!ELSEIF "$(CFG)" == "minigzip - Win32 LIB Release"
!ELSEIF "$(CFG)" == "minigzip - Win32 LIB ASM Release"
# PROP BASE Use_MFC 0
# PROP BASE Use_Debug_Libraries 0
# PROP BASE Output_Dir "minigzip___Win32_LIB_Release"
# PROP BASE Intermediate_Dir "minigzip___Win32_LIB_Release"
# PROP BASE Output_Dir "minigzip___Win32_LIB_ASM_Release"
# PROP BASE Intermediate_Dir "minigzip___Win32_LIB_ASM_Release"
# PROP BASE Target_Dir ""
# PROP Use_MFC 0
# PROP Use_Debug_Libraries 0
# PROP Output_Dir "Win32_LIB_Release"
# PROP Intermediate_Dir "Win32_LIB_Release"
# PROP Output_Dir "Win32_LIB_ASM_Release"
# PROP Intermediate_Dir "Win32_LIB_ASM_Release"
# PROP Ignore_Export_Lib 0
# PROP Target_Dir ""
# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
# SUBTRACT BASE CPP /YX
# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
# SUBTRACT CPP /YX
# ADD BASE RSC /l 0x409 /d "NDEBUG"
# ADD RSC /l 0x409 /d "NDEBUG"
......@@ -164,22 +164,22 @@ LINK32=link.exe
# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
# ADD LINK32 /nologo /subsystem:console /machine:I386
!ELSEIF "$(CFG)" == "minigzip - Win32 LIB Debug"
!ELSEIF "$(CFG)" == "minigzip - Win32 LIB ASM Debug"
# PROP BASE Use_MFC 0
# PROP BASE Use_Debug_Libraries 1
# PROP BASE Output_Dir "minigzip___Win32_LIB_Debug"
# PROP BASE Intermediate_Dir "minigzip___Win32_LIB_Debug"
# PROP BASE Output_Dir "minigzip___Win32_LIB_ASM_Debug"
# PROP BASE Intermediate_Dir "minigzip___Win32_LIB_ASM_Debug"
# PROP BASE Target_Dir ""
# PROP Use_MFC 0
# PROP Use_Debug_Libraries 1
# PROP Output_Dir "Win32_LIB_Debug"
# PROP Intermediate_Dir "Win32_LIB_Debug"
# PROP Output_Dir "Win32_LIB_ASM_Debug"
# PROP Intermediate_Dir "Win32_LIB_ASM_Debug"
# PROP Ignore_Export_Lib 0
# PROP Target_Dir ""
# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
# SUBTRACT BASE CPP /YX
# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
# SUBTRACT CPP /YX
# ADD BASE RSC /l 0x409 /d "_DEBUG"
# ADD RSC /l 0x409 /d "_DEBUG"
......@@ -190,22 +190,22 @@ LINK32=link.exe
# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
# ADD LINK32 /nologo /subsystem:console /debug /machine:I386 /pdbtype:sept
!ELSEIF "$(CFG)" == "minigzip - Win32 LIB ASM Release"
!ELSEIF "$(CFG)" == "minigzip - Win32 LIB Release"
# PROP BASE Use_MFC 0
# PROP BASE Use_Debug_Libraries 0
# PROP BASE Output_Dir "minigzip___Win32_LIB_ASM_Release"
# PROP BASE Intermediate_Dir "minigzip___Win32_LIB_ASM_Release"
# PROP BASE Output_Dir "minigzip___Win32_LIB_Release"
# PROP BASE Intermediate_Dir "minigzip___Win32_LIB_Release"
# PROP BASE Target_Dir ""
# PROP Use_MFC 0
# PROP Use_Debug_Libraries 0
# PROP Output_Dir "Win32_LIB_ASM_Release"
# PROP Intermediate_Dir "Win32_LIB_ASM_Release"
# PROP Output_Dir "Win32_LIB_Release"
# PROP Intermediate_Dir "Win32_LIB_Release"
# PROP Ignore_Export_Lib 0
# PROP Target_Dir ""
# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
# SUBTRACT BASE CPP /YX
# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
# SUBTRACT CPP /YX
# ADD BASE RSC /l 0x409 /d "NDEBUG"
# ADD RSC /l 0x409 /d "NDEBUG"
......@@ -216,22 +216,22 @@ LINK32=link.exe
# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386
# ADD LINK32 /nologo /subsystem:console /machine:I386
!ELSEIF "$(CFG)" == "minigzip - Win32 LIB ASM Debug"
!ELSEIF "$(CFG)" == "minigzip - Win32 LIB Debug"
# PROP BASE Use_MFC 0
# PROP BASE Use_Debug_Libraries 1
# PROP BASE Output_Dir "minigzip___Win32_LIB_ASM_Debug"
# PROP BASE Intermediate_Dir "minigzip___Win32_LIB_ASM_Debug"
# PROP BASE Output_Dir "minigzip___Win32_LIB_Debug"
# PROP BASE Intermediate_Dir "minigzip___Win32_LIB_Debug"
# PROP BASE Target_Dir ""
# PROP Use_MFC 0
# PROP Use_Debug_Libraries 1
# PROP Output_Dir "Win32_LIB_ASM_Debug"
# PROP Intermediate_Dir "Win32_LIB_ASM_Debug"
# PROP Output_Dir "Win32_LIB_Debug"
# PROP Intermediate_Dir "Win32_LIB_Debug"
# PROP Ignore_Export_Lib 0
# PROP Target_Dir ""
# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
# SUBTRACT BASE CPP /YX
# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
# SUBTRACT CPP /YX
# ADD BASE RSC /l 0x409 /d "_DEBUG"
# ADD RSC /l 0x409 /d "_DEBUG"
......@@ -246,14 +246,14 @@ LINK32=link.exe
# Begin Target
# Name "minigzip - Win32 DLL Release"
# Name "minigzip - Win32 DLL Debug"
# Name "minigzip - Win32 DLL ASM Release"
# Name "minigzip - Win32 DLL ASM Debug"
# Name "minigzip - Win32 LIB Release"
# Name "minigzip - Win32 LIB Debug"
# Name "minigzip - Win32 DLL Release"
# Name "minigzip - Win32 DLL Debug"
# Name "minigzip - Win32 LIB ASM Release"
# Name "minigzip - Win32 LIB ASM Debug"
# Name "minigzip - Win32 LIB Release"
# Name "minigzip - Win32 LIB Debug"
# Begin Group "Source Files"
# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
......
projects/visualc6/zlib.dsp
浏览文件 @ b1c19ca6
......@@ -18,14 +18,14 @@ CFG=zlib - Win32 LIB Debug
!MESSAGE
!MESSAGE Possible choices for configuration are:
!MESSAGE
!MESSAGE "zlib - Win32 DLL Release" (based on "Win32 (x86) Dynamic-Link Library")
!MESSAGE "zlib - Win32 DLL Debug" (based on "Win32 (x86) Dynamic-Link Library")
!MESSAGE "zlib - Win32 DLL ASM Release" (based on "Win32 (x86) Dynamic-Link Library")
!MESSAGE "zlib - Win32 DLL ASM Debug" (based on "Win32 (x86) Dynamic-Link Library")
!MESSAGE "zlib - Win32 LIB Release" (based on "Win32 (x86) Static Library")
!MESSAGE "zlib - Win32 LIB Debug" (based on "Win32 (x86) Static Library")
!MESSAGE "zlib - Win32 DLL Release" (based on "Win32 (x86) Dynamic-Link Library")
!MESSAGE "zlib - Win32 DLL Debug" (based on "Win32 (x86) Dynamic-Link Library")
!MESSAGE "zlib - Win32 LIB ASM Release" (based on "Win32 (x86) Static Library")
!MESSAGE "zlib - Win32 LIB ASM Debug" (based on "Win32 (x86) Static Library")
!MESSAGE "zlib - Win32 LIB Release" (based on "Win32 (x86) Static Library")
!MESSAGE "zlib - Win32 LIB Debug" (based on "Win32 (x86) Static Library")
!MESSAGE
# Begin Project
......@@ -33,23 +33,23 @@ CFG=zlib - Win32 LIB Debug
# PROP Scc_ProjName ""
# PROP Scc_LocalPath ""
!IF "$(CFG)" == "zlib - Win32 DLL Release"
!IF "$(CFG)" == "zlib - Win32 DLL ASM Release"
# PROP BASE Use_MFC 0
# PROP BASE Use_Debug_Libraries 0
# PROP BASE Output_Dir "zlib___Win32_DLL_Release"
# PROP BASE Intermediate_Dir "zlib___Win32_DLL_Release"
# PROP BASE Output_Dir "zlib___Win32_DLL_ASM_Release"
# PROP BASE Intermediate_Dir "zlib___Win32_DLL_ASM_Release"
# PROP BASE Target_Dir ""
# PROP Use_MFC 0
# PROP Use_Debug_Libraries 0
# PROP Output_Dir "Win32_DLL_Release"
# PROP Intermediate_Dir "Win32_DLL_Release"
# PROP Output_Dir "Win32_DLL_ASM_Release"
# PROP Intermediate_Dir "Win32_DLL_ASM_Release"
# PROP Ignore_Export_Lib 0
# PROP Target_Dir ""
CPP=cl.exe
# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
# SUBTRACT BASE CPP /YX /Yc /Yu
# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /D "ASMV" /D "ASMINF" /FD /c
# SUBTRACT CPP /YX /Yc /Yu
MTL=midl.exe
# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
......@@ -62,25 +62,25 @@ BSC32=bscmake.exe
# ADD BSC32 /nologo
LINK32=link.exe
# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /dll /machine:I386
# ADD LINK32 /nologo /dll /machine:I386 /out:"Win32_DLL_Release\zlib1.dll"
# ADD LINK32 /nologo /dll /machine:I386 /out:"Win32_DLL_ASM_Release\zlib1.dll"
!ELSEIF "$(CFG)" == "zlib - Win32 DLL Debug"
!ELSEIF "$(CFG)" == "zlib - Win32 DLL ASM Debug"
# PROP BASE Use_MFC 0
# PROP BASE Use_Debug_Libraries 1
# PROP BASE Output_Dir "zlib___Win32_DLL_Debug"
# PROP BASE Intermediate_Dir "zlib___Win32_DLL_Debug"
# PROP BASE Output_Dir "zlib___Win32_DLL_ASM_Debug"
# PROP BASE Intermediate_Dir "zlib___Win32_DLL_ASM_Debug"
# PROP BASE Target_Dir ""
# PROP Use_MFC 0
# PROP Use_Debug_Libraries 1
# PROP Output_Dir "Win32_DLL_Debug"
# PROP Intermediate_Dir "Win32_DLL_Debug"
# PROP Output_Dir "Win32_DLL_ASM_Debug"
# PROP Intermediate_Dir "Win32_DLL_ASM_Debug"
# PROP Ignore_Export_Lib 0
# PROP Target_Dir ""
CPP=cl.exe
# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
# SUBTRACT BASE CPP /YX /Yc /Yu
# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /D "ASMV" /D "ASMINF" /FR /FD /GZ /c
# SUBTRACT CPP /YX /Yc /Yu
MTL=midl.exe
# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /win32
......@@ -93,25 +93,25 @@ BSC32=bscmake.exe
# ADD BSC32 /nologo
LINK32=link.exe
# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /dll /debug /machine:I386 /pdbtype:sept
# ADD LINK32 /nologo /dll /debug /machine:I386 /out:"Win32_DLL_Debug\zlib1d.dll" /pdbtype:sept
# ADD LINK32 /nologo /dll /debug /machine:I386 /out:"Win32_DLL_ASM_Debug\zlib1d.dll" /pdbtype:sept
!ELSEIF "$(CFG)" == "zlib - Win32 DLL ASM Release"
!ELSEIF "$(CFG)" == "zlib - Win32 DLL Release"
# PROP BASE Use_MFC 0
# PROP BASE Use_Debug_Libraries 0
# PROP BASE Output_Dir "zlib___Win32_DLL_ASM_Release"
# PROP BASE Intermediate_Dir "zlib___Win32_DLL_ASM_Release"
# PROP BASE Output_Dir "zlib___Win32_DLL_Release"
# PROP BASE Intermediate_Dir "zlib___Win32_DLL_Release"
# PROP BASE Target_Dir ""
# PROP Use_MFC 0
# PROP Use_Debug_Libraries 0
# PROP Output_Dir "Win32_DLL_ASM_Release"
# PROP Intermediate_Dir "Win32_DLL_ASM_Release"
# PROP Output_Dir "Win32_DLL_Release"
# PROP Intermediate_Dir "Win32_DLL_Release"
# PROP Ignore_Export_Lib 0
# PROP Target_Dir ""
CPP=cl.exe
# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
# SUBTRACT BASE CPP /YX /Yc /Yu
# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /D "ASMV" /D "ASMINF" /FD /c
# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
# SUBTRACT CPP /YX /Yc /Yu
MTL=midl.exe
# ADD BASE MTL /nologo /D "NDEBUG" /mktyplib203 /win32
......@@ -124,25 +124,25 @@ BSC32=bscmake.exe
# ADD BSC32 /nologo
LINK32=link.exe
# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /dll /machine:I386
# ADD LINK32 /nologo /dll /machine:I386 /out:"Win32_DLL_ASM_Release\zlib1.dll"
# ADD LINK32 /nologo /dll /machine:I386 /out:"Win32_DLL_Release\zlib1.dll"
!ELSEIF "$(CFG)" == "zlib - Win32 DLL ASM Debug"
!ELSEIF "$(CFG)" == "zlib - Win32 DLL Debug"
# PROP BASE Use_MFC 0
# PROP BASE Use_Debug_Libraries 1
# PROP BASE Output_Dir "zlib___Win32_DLL_ASM_Debug"
# PROP BASE Intermediate_Dir "zlib___Win32_DLL_ASM_Debug"
# PROP BASE Output_Dir "zlib___Win32_DLL_Debug"
# PROP BASE Intermediate_Dir "zlib___Win32_DLL_Debug"
# PROP BASE Target_Dir ""
# PROP Use_MFC 0
# PROP Use_Debug_Libraries 1
# PROP Output_Dir "Win32_DLL_ASM_Debug"
# PROP Intermediate_Dir "Win32_DLL_ASM_Debug"
# PROP Output_Dir "Win32_DLL_Debug"
# PROP Intermediate_Dir "Win32_DLL_Debug"
# PROP Ignore_Export_Lib 0
# PROP Target_Dir ""
CPP=cl.exe
# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
# SUBTRACT BASE CPP /YX /Yc /Yu
# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /D "ASMV" /D "ASMINF" /FD /GZ /c
# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
# SUBTRACT CPP /YX /Yc /Yu
MTL=midl.exe
# ADD BASE MTL /nologo /D "_DEBUG" /mktyplib203 /win32
......@@ -155,24 +155,24 @@ BSC32=bscmake.exe
# ADD BSC32 /nologo
LINK32=link.exe
# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /dll /debug /machine:I386 /pdbtype:sept
# ADD LINK32 /nologo /dll /debug /machine:I386 /out:"Win32_DLL_ASM_Debug\zlib1d.dll" /pdbtype:sept
# ADD LINK32 /nologo /dll /debug /machine:I386 /out:"Win32_DLL_Debug\zlib1d.dll" /pdbtype:sept
!ELSEIF "$(CFG)" == "zlib - Win32 LIB Release"
!ELSEIF "$(CFG)" == "zlib - Win32 LIB ASM Release"
# PROP BASE Use_MFC 0
# PROP BASE Use_Debug_Libraries 0
# PROP BASE Output_Dir "zlib___Win32_LIB_Release"
# PROP BASE Intermediate_Dir "zlib___Win32_LIB_Release"
# PROP BASE Output_Dir "zlib___Win32_LIB_ASM_Release"
# PROP BASE Intermediate_Dir "zlib___Win32_LIB_ASM_Release"
# PROP BASE Target_Dir ""
# PROP Use_MFC 0
# PROP Use_Debug_Libraries 0
# PROP Output_Dir "Win32_LIB_Release"
# PROP Intermediate_Dir "Win32_LIB_Release"
# PROP Output_Dir "Win32_LIB_ASM_Release"
# PROP Intermediate_Dir "Win32_LIB_ASM_Release"
# PROP Target_Dir ""
CPP=cl.exe
# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
# SUBTRACT BASE CPP /YX /Yc /Yu
# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /D "ASMV" /D "ASMINF" /FD /c
# SUBTRACT CPP /YX /Yc /Yu
RSC=rc.exe
# ADD BASE RSC /l 0x409 /d "NDEBUG"
......@@ -184,22 +184,22 @@ LIB32=link.exe -lib
# ADD BASE LIB32 /nologo
# ADD LIB32 /nologo
!ELSEIF "$(CFG)" == "zlib - Win32 LIB Debug"
!ELSEIF "$(CFG)" == "zlib - Win32 LIB ASM Debug"
# PROP BASE Use_MFC 0
# PROP BASE Use_Debug_Libraries 1
# PROP BASE Output_Dir "zlib___Win32_LIB_Debug"
# PROP BASE Intermediate_Dir "zlib___Win32_LIB_Debug"
# PROP BASE Output_Dir "zlib___Win32_LIB_ASM_Debug"
# PROP BASE Intermediate_Dir "zlib___Win32_LIB_ASM_Debug"
# PROP BASE Target_Dir ""
# PROP Use_MFC 0
# PROP Use_Debug_Libraries 1
# PROP Output_Dir "Win32_LIB_Debug"
# PROP Intermediate_Dir "Win32_LIB_Debug"
# PROP Output_Dir "Win32_LIB_ASM_Debug"
# PROP Intermediate_Dir "Win32_LIB_ASM_Debug"
# PROP Target_Dir ""
CPP=cl.exe
# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
# SUBTRACT BASE CPP /YX /Yc /Yu
# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /D "ASMV" /D "ASMINF" /FR /FD /GZ /c
# SUBTRACT CPP /YX /Yc /Yu
RSC=rc.exe
# ADD BASE RSC /l 0x409 /d "_DEBUG"
......@@ -209,24 +209,24 @@ BSC32=bscmake.exe
# ADD BSC32 /nologo
LIB32=link.exe -lib
# ADD BASE LIB32 /nologo
# ADD LIB32 /nologo /out:"Win32_LIB_Debug\zlibd.lib"
# ADD LIB32 /nologo /out:"Win32_LIB_ASM_Debug\zlibd.lib"
!ELSEIF "$(CFG)" == "zlib - Win32 LIB ASM Release"
!ELSEIF "$(CFG)" == "zlib - Win32 LIB Release"
# PROP BASE Use_MFC 0
# PROP BASE Use_Debug_Libraries 0
# PROP BASE Output_Dir "zlib___Win32_LIB_ASM_Release"
# PROP BASE Intermediate_Dir "zlib___Win32_LIB_ASM_Release"
# PROP BASE Output_Dir "zlib___Win32_LIB_Release"
# PROP BASE Intermediate_Dir "zlib___Win32_LIB_Release"
# PROP BASE Target_Dir ""
# PROP Use_MFC 0
# PROP Use_Debug_Libraries 0
# PROP Output_Dir "Win32_LIB_ASM_Release"
# PROP Intermediate_Dir "Win32_LIB_ASM_Release"
# PROP Output_Dir "Win32_LIB_Release"
# PROP Intermediate_Dir "Win32_LIB_Release"
# PROP Target_Dir ""
CPP=cl.exe
# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /FD /c
# SUBTRACT BASE CPP /YX /Yc /Yu
# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /D "ASMV" /D "ASMINF" /FD /c
# ADD CPP /nologo /MD /W3 /O2 /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "NDEBUG" /FD /c
# SUBTRACT CPP /YX /Yc /Yu
RSC=rc.exe
# ADD BASE RSC /l 0x409 /d "NDEBUG"
......@@ -238,22 +238,22 @@ LIB32=link.exe -lib
# ADD BASE LIB32 /nologo
# ADD LIB32 /nologo
!ELSEIF "$(CFG)" == "zlib - Win32 LIB ASM Debug"
!ELSEIF "$(CFG)" == "zlib - Win32 LIB Debug"
# PROP BASE Use_MFC 0
# PROP BASE Use_Debug_Libraries 1
# PROP BASE Output_Dir "zlib___Win32_LIB_ASM_Debug"
# PROP BASE Intermediate_Dir "zlib___Win32_LIB_ASM_Debug"
# PROP BASE Output_Dir "zlib___Win32_LIB_Debug"
# PROP BASE Intermediate_Dir "zlib___Win32_LIB_Debug"
# PROP BASE Target_Dir ""
# PROP Use_MFC 0
# PROP Use_Debug_Libraries 1
# PROP Output_Dir "Win32_LIB_ASM_Debug"
# PROP Intermediate_Dir "Win32_LIB_ASM_Debug"
# PROP Output_Dir "Win32_LIB_Debug"
# PROP Intermediate_Dir "Win32_LIB_Debug"
# PROP Target_Dir ""
CPP=cl.exe
# ADD BASE CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /FD /GZ /c
# SUBTRACT BASE CPP /YX /Yc /Yu
# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_DEBUG" /D "ASMV" /D "ASMINF" /FD /GZ /c
# ADD CPP /nologo /MDd /W3 /Gm /ZI /Od /D "WIN32" /D "_CRT_SECURE_NO_DEPRECATE" /D "_CRT_NONSTDC_NO_DEPRECATE" /D "_DEBUG" /FR /FD /GZ /c
# SUBTRACT CPP /YX /Yc /Yu
RSC=rc.exe
# ADD BASE RSC /l 0x409 /d "_DEBUG"
......@@ -263,20 +263,20 @@ BSC32=bscmake.exe
# ADD BSC32 /nologo
LIB32=link.exe -lib
# ADD BASE LIB32 /nologo
# ADD LIB32 /nologo /out:"Win32_LIB_ASM_Debug\zlibd.lib"
# ADD LIB32 /nologo /out:"Win32_LIB_Debug\zlibd.lib"
!ENDIF
# Begin Target
# Name "zlib - Win32 DLL Release"
# Name "zlib - Win32 DLL Debug"
# Name "zlib - Win32 DLL ASM Release"
# Name "zlib - Win32 DLL ASM Debug"
# Name "zlib - Win32 LIB Release"
# Name "zlib - Win32 LIB Debug"
# Name "zlib - Win32 DLL Release"
# Name "zlib - Win32 DLL Debug"
# Name "zlib - Win32 LIB ASM Release"
# Name "zlib - Win32 LIB ASM Debug"
# Name "zlib - Win32 LIB Release"
# Name "zlib - Win32 LIB Debug"
# Begin Group "Source Files"
# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat"
......@@ -328,27 +328,27 @@ SOURCE=..\..\uncompr.c
SOURCE=..\..\win32\zlib.def
!IF "$(CFG)" == "zlib - Win32 DLL Release"
!IF "$(CFG)" == "zlib - Win32 DLL ASM Release"
!ELSEIF "$(CFG)" == "zlib - Win32 DLL Debug"
!ELSEIF "$(CFG)" == "zlib - Win32 DLL ASM Debug"
!ELSEIF "$(CFG)" == "zlib - Win32 DLL ASM Release"
!ELSEIF "$(CFG)" == "zlib - Win32 DLL Release"
!ELSEIF "$(CFG)" == "zlib - Win32 DLL ASM Debug"
!ELSEIF "$(CFG)" == "zlib - Win32 DLL Debug"
!ELSEIF "$(CFG)" == "zlib - Win32 LIB Release"
!ELSEIF "$(CFG)" == "zlib - Win32 LIB ASM Release"
# PROP Exclude_From_Build 1
!ELSEIF "$(CFG)" == "zlib - Win32 LIB Debug"
!ELSEIF "$(CFG)" == "zlib - Win32 LIB ASM Debug"
# PROP Exclude_From_Build 1
!ELSEIF "$(CFG)" == "zlib - Win32 LIB ASM Release"
!ELSEIF "$(CFG)" == "zlib - Win32 LIB Release"
# PROP Exclude_From_Build 1
!ELSEIF "$(CFG)" == "zlib - Win32 LIB ASM Debug"
!ELSEIF "$(CFG)" == "zlib - Win32 LIB Debug"
# PROP Exclude_From_Build 1
......@@ -419,15 +419,7 @@ SOURCE=..\..\win32\zlib1.rc
SOURCE=..\..\contrib\masmx86\gvmat32.asm
!IF "$(CFG)" == "zlib - Win32 DLL Release"
# PROP Exclude_From_Build 1
!ELSEIF "$(CFG)" == "zlib - Win32 DLL Debug"
# PROP Exclude_From_Build 1
!ELSEIF "$(CFG)" == "zlib - Win32 DLL ASM Release"
!IF "$(CFG)" == "zlib - Win32 DLL ASM Release"
# Begin Custom Build - Assembling...
IntDir=.\Win32_DLL_ASM_Release
......@@ -451,11 +443,11 @@ InputName=gvmat32
# End Custom Build
!ELSEIF "$(CFG)" == "zlib - Win32 LIB Release"
!ELSEIF "$(CFG)" == "zlib - Win32 DLL Release"
# PROP Exclude_From_Build 1
!ELSEIF "$(CFG)" == "zlib - Win32 LIB Debug"
!ELSEIF "$(CFG)" == "zlib - Win32 DLL Debug"
# PROP Exclude_From_Build 1
......@@ -483,6 +475,14 @@ InputName=gvmat32
# End Custom Build
!ELSEIF "$(CFG)" == "zlib - Win32 LIB Release"
# PROP Exclude_From_Build 1
!ELSEIF "$(CFG)" == "zlib - Win32 LIB Debug"
# PROP Exclude_From_Build 1
!ENDIF
# End Source File
......@@ -490,7 +490,15 @@ InputName=gvmat32
SOURCE=..\..\contrib\masmx86\gvmat32c.c
!IF "$(CFG)" == "zlib - Win32 DLL Release"
!IF "$(CFG)" == "zlib - Win32 DLL ASM Release"
# ADD CPP /I "..\.."
!ELSEIF "$(CFG)" == "zlib - Win32 DLL ASM Debug"
# ADD CPP /I "..\.."
!ELSEIF "$(CFG)" == "zlib - Win32 DLL Release"
# PROP Exclude_From_Build 1
# ADD CPP /I "..\.."
......@@ -500,11 +508,11 @@ SOURCE=..\..\contrib\masmx86\gvmat32c.c
# PROP Exclude_From_Build 1
# ADD CPP /I "..\.."
!ELSEIF "$(CFG)" == "zlib - Win32 DLL ASM Release"
!ELSEIF "$(CFG)" == "zlib - Win32 LIB ASM Release"
# ADD CPP /I "..\.."
!ELSEIF "$(CFG)" == "zlib - Win32 DLL ASM Debug"
!ELSEIF "$(CFG)" == "zlib - Win32 LIB ASM Debug"
# ADD CPP /I "..\.."
......@@ -518,14 +526,6 @@ SOURCE=..\..\contrib\masmx86\gvmat32c.c
# PROP Exclude_From_Build 1
# ADD CPP /I "..\.."
!ELSEIF "$(CFG)" == "zlib - Win32 LIB ASM Release"
# ADD CPP /I "..\.."
!ELSEIF "$(CFG)" == "zlib - Win32 LIB ASM Debug"
# ADD CPP /I "..\.."
!ENDIF
# End Source File
......@@ -533,15 +533,7 @@ SOURCE=..\..\contrib\masmx86\gvmat32c.c
SOURCE=..\..\contrib\masmx86\inffas32.asm
!IF "$(CFG)" == "zlib - Win32 DLL Release"
# PROP Exclude_From_Build 1
!ELSEIF "$(CFG)" == "zlib - Win32 DLL Debug"
# PROP Exclude_From_Build 1
!ELSEIF "$(CFG)" == "zlib - Win32 DLL ASM Release"
!IF "$(CFG)" == "zlib - Win32 DLL ASM Release"
# Begin Custom Build - Assembling...
IntDir=.\Win32_DLL_ASM_Release
......@@ -565,11 +557,11 @@ InputName=inffas32
# End Custom Build
!ELSEIF "$(CFG)" == "zlib - Win32 LIB Release"
!ELSEIF "$(CFG)" == "zlib - Win32 DLL Release"
# PROP Exclude_From_Build 1
!ELSEIF "$(CFG)" == "zlib - Win32 LIB Debug"
!ELSEIF "$(CFG)" == "zlib - Win32 DLL Debug"
# PROP Exclude_From_Build 1
......@@ -597,6 +589,14 @@ InputName=inffas32
# End Custom Build
!ELSEIF "$(CFG)" == "zlib - Win32 LIB Release"
# PROP Exclude_From_Build 1
!ELSEIF "$(CFG)" == "zlib - Win32 LIB Debug"
# PROP Exclude_From_Build 1
!ENDIF
# End Source File
......
qnx/package.qpg
浏览文件 @ b1c19ca6
......@@ -25,10 +25,10 @@
<QPG:Files>
<QPG:Add file="../zconf.h" install="/opt/include/" user="root:sys" permission="644"/>
<QPG:Add file="../zlib.h" install="/opt/include/" user="root:sys" permission="644"/>
<QPG:Add file="../libz.so.1.2.3" install="/opt/lib/" user="root:bin" permission="644"/>
<QPG:Add file="libz.so" install="/opt/lib/" component="dev" filetype="symlink" linkto="libz.so.1.2.3"/>
<QPG:Add file="libz.so.1" install="/opt/lib/" filetype="symlink" linkto="libz.so.1.2.3"/>
<QPG:Add file="../libz.so.1.2.3" install="/opt/lib/" component="slib"/>
<QPG:Add file="../libz.so.1.2.3.1" install="/opt/lib/" user="root:bin" permission="644"/>
<QPG:Add file="libz.so" install="/opt/lib/" component="dev" filetype="symlink" linkto="libz.so.1.2.3.1"/>
<QPG:Add file="libz.so.1" install="/opt/lib/" filetype="symlink" linkto="libz.so.1.2.3.1"/>
<QPG:Add file="../libz.so.1.2.3.1" install="/opt/lib/" component="slib"/>
</QPG:Files>
<QPG:PackageFilter>
......@@ -63,7 +63,7 @@
</QPM:ProductDescription>
<QPM:ReleaseDescription>
<QPM:ReleaseVersion>1.2.3</QPM:ReleaseVersion>
<QPM:ReleaseVersion>1.2.3.1</QPM:ReleaseVersion>
<QPM:ReleaseUrgency>Medium</QPM:ReleaseUrgency>
<QPM:ReleaseStability>Stable</QPM:ReleaseStability>
<QPM:ReleaseNoteMinor></QPM:ReleaseNoteMinor>
......
todo/Makefile-new 0 → 100644
浏览文件 @ b1c19ca6
# Makefile for zlib
# Copyright (C) 1995-2006 Jean-loup Gailly.
# For conditions of distribution and use, see copyright notice in zlib.h
# To compile and test, type:
# ./configure; make test
# The call of configure is optional if you don't have special requirements
# If you wish to build zlib as a shared library, use: ./configure -s
# To use the asm code, type:
# cp contrib/asm?86/match.S ./match.S
# make LOC=-DASMV OBJA=match.o
# To install /usr/local/lib/libz.* and /usr/local/include/zlib.h, type:
# make install
# To install in $HOME instead of /usr/local, use:
# make install prefix=$HOME
CC=cc
CFLAGS=-O
#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
#CFLAGS=-g -DDEBUG
#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
# -Wstrict-prototypes -Wmissing-prototypes
SFLAGS=$(CFLAGS)
#SFLAGS=$(CFLAGS) -fPIC
LD=$(CC)
LDFLAGS=libz.a
LDSHARED=$(CC)
CPP=$(CC) -E
STATICLIB=libz.a
SHAREDLIB=libz.so
SHAREDLIBV=libz.so.1.2.3
SHAREDLIBM=libz.so.1
EXE=
LIBS=$(STATICLIB) $(SHAREDLIBV)
AR=ar rc
RANLIB=ranlib
TAR=tar
SHELL=/bin/sh
prefix=/usr/local
exec_prefix=${prefix}
libdir=${exec_prefix}/lib
includedir=${prefix}/include
mandir=${prefix}/share/man
man3dir=${mandir}/man3
pkgconfigdir = ${libdir}/pkgconfig
OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
zutil.o inflate.o infback.o inftrees.o inffast.o
OBJA =
#OBJA = match.o
# to use the asm code: make OBJA=match.o
TEST_OBJS = example.o minigzip.o
OBJS_PIC = $(OBJS:.o=.pic.o)
OBJA_PIC = $(OBJA:.o=.pic.o)
.SUFFIXES: .c .o .pic.o
.c.o:
$(CC) -c $(CFLAGS) -o $@ $*.c
.c.pic.o:
$(CC) -c $(SFLAGS) -o $@ $*.c
all: $(STATICLIB) example$(EXE) minigzip$(EXE)
#all: $(STATICLIB) $(SHAREDLIBV) example$(EXE) minigzip$(EXE)
check: test
test: all
@LD_LIBRARY_PATH=.:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
echo hello world | ./minigzip | ./minigzip -d || \
echo ' *** minigzip test FAILED ***' ; \
if ./example; then \
echo ' *** zlib test OK ***'; \
else \
echo ' *** zlib test FAILED ***'; \
fi
match.o: match.S
$(CPP) match.S > _match.s
$(CC) -c _match.s
mv _match.o match.o
rm -f _match.s
match.pic.o: match.S
$(CPP) match.S > _match.s
$(CC) -c -fPIC _match.s
mv _match.o match.pic.o
rm -f _match.s
$(STATICLIB): $(OBJS) $(OBJA)
$(AR) $@ $(OBJS) $(OBJA)
-@ ($(RANLIB) $@ || true) >/dev/null 2>&1
$(SHAREDLIBV): $(OBJS_PIC) $(OBJA_PIC)
$(LDSHARED) -o $@ $(OBJS_PIC) $(OBJA_PIC)
rm -f $(SHAREDLIB) $(SHAREDLIBM)
ln -s $@ $(SHAREDLIB)
ln -s $@ $(SHAREDLIBM)
example$(EXE): example.o $(STATICLIB)
$(LD) -o $@ example.o $(LDFLAGS)
minigzip$(EXE): minigzip.o $(STATICLIB)
$(LD) -o $@ minigzip.o $(LDFLAGS)
install: $(LIBS)
mkdir -p $(DESTDIR)$(exec_prefix)
mkdir -p $(DESTDIR)$(includedir)
mkdir -p $(DESTDIR)$(libdir)
mkdir -p $(DESTDIR)$(man3dir)
mkdir -p $(DESTDIR)$(pkgconfigdir)
cp zlib.h zconf.h $(DESTDIR)$(includedir)
chmod 644 $(DESTDIR)$(includedir)/zlib.h $(DESTDIR)$(includedir)/zconf.h
cp $(LIBS) $(DESTDIR)$(libdir)
cd $(DESTDIR)$(libdir); chmod 755 $(LIBS)
-@(cd $(DESTDIR)$(libdir); $(RANLIB) $(STATICLIB) || true) >/dev/null 2>&1
cd $(DESTDIR)$(libdir); if test -f $(SHAREDLIBV); then \
rm -f $(SHAREDLIB) $(SHAREDLIBM); \
ln -s $(SHAREDLIBV) $(SHAREDLIB); \
ln -s $(SHAREDLIBV) $(SHAREDLIBM); \
(ldconfig || true) >/dev/null 2>&1; \
fi
cp zlib.3 $(DESTDIR)$(man3dir)
chmod 644 $(DESTDIR)$(man3dir)/zlib.3
cp zlib.pc $(DESTDIR)$(pkgconfigdir)
chmod 644 $(DESTDIR)$(pkgconfigdir)/zlib.pc
# The ranlib in install is needed on NeXTSTEP which checks file times
# ldconfig is for Linux
uninstall:
cd $(DESTDIR)$(includedir); rm -f zlib.h zconf.h
cd $(DESTDIR)$(libdir); rm -f $(STATICLIB); \
if test -f $(SHAREDLIBV); then \
rm -f $(SHAREDLIBV) $(SHAREDLIB) $(SHAREDLIBM); \
fi
cd $(DESTDIR)$(man3dir); rm -f zlib.3
cd $(DESTDIR)$(pkgconfigdir); rm -f zlib.pc
mostlyclean: clean
clean:
rm -f *.o *~ example$(EXE) minigzip$(EXE) \
libz.* foo.gz so_locations \
_match.s maketree contrib/infback9/*.o
maintainer-clean: distclean
distclean: clean
cp -p Makefile.in Makefile
cp -p zconf.in.h zconf.h
rm -f zlib.pc .DS_Store
tags:
etags *.[ch]
depend:
makedepend -- $(CFLAGS) -- *.[ch]
# "fake" targets: not real filenames and no deps (else "touch clean" defeats)
.PHONY: install uninstall clean tags depend
# DO NOT DELETE THIS LINE -- "make depend" depends on it.
adler32.o: zlib.h zconf.h
adler32.pic.o: zlib.h zconf.h
compress.o: zlib.h zconf.h
compress.pic.o: zlib.h zconf.h
crc32.o: crc32.h zlib.h zconf.h
crc32.pic.o: crc32.h zlib.h zconf.h
deflate.o: deflate.h zutil.h zlib.h zconf.h
deflate.pic.o: deflate.h zutil.h zlib.h zconf.h
example.o: zlib.h zconf.h
example.pic.o: zlib.h zconf.h
gzio.o: zutil.h zlib.h zconf.h
gzio.pic.o: zutil.h zlib.h zconf.h
inffast.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
inffast.pic.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
inflate.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
inflate.pic.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
infback.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
infback.pic.o: zutil.h zlib.h zconf.h inftrees.h inflate.h inffast.h
inftrees.o: zutil.h zlib.h zconf.h inftrees.h
inftrees.pic.o: zutil.h zlib.h zconf.h inftrees.h
minigzip.o: zlib.h zconf.h
minigzip.pic.o: zlib.h zconf.h
trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
trees.pic.o: deflate.h zutil.h zlib.h zconf.h trees.h
uncompr.o: zlib.h zconf.h
uncompr.pic.o: zlib.h zconf.h
zutil.o: zutil.h zlib.h zconf.h
zutil.pic.o: zutil.h zlib.h zconf.h
todo/README 0 → 100644
浏览文件 @ b1c19ca6
This "todo" directory contains works in progress. Nothing in here works, so don't try to use it!
trees.c
浏览文件 @ b1c19ca6
/* trees.c -- output deflated data using Huffman coding
* Copyright (C) 1995-2005 Jean-loup Gailly
* Copyright (C) 1995-2006 Jean-loup Gailly
* detect_data_type() function provided freely by Cosmin Truta, 2006
* For conditions of distribution and use, see copyright notice in zlib.h
*/
......@@ -152,7 +153,7 @@ local void send_all_trees OF((deflate_state *s, int lcodes, int dcodes,
int blcodes));
local void compress_block OF((deflate_state *s, ct_data *ltree,
ct_data *dtree));
local void set_data_type OF((deflate_state *s));
local int detect_data_type OF((deflate_state *s));
local unsigned bi_reverse OF((unsigned value, int length));
local void bi_windup OF((deflate_state *s));
local void bi_flush OF((deflate_state *s));
......@@ -250,11 +251,13 @@ local void tr_static_init()
if (static_init_done) return;
/* For some embedded targets, global variables are not initialized: */
#ifdef NO_INIT_GLOBAL_POINTERS
static_l_desc.static_tree = static_ltree;
static_l_desc.extra_bits = extra_lbits;
static_d_desc.static_tree = static_dtree;
static_d_desc.extra_bits = extra_dbits;
static_bl_desc.extra_bits = extra_blbits;
#endif
/* Initialize the mapping length (0..255) -> length code (0..28) */
length = 0;
......@@ -931,8 +934,8 @@ void _tr_flush_block(s, buf, stored_len, eof)
if (s->level > 0) {
/* Check if the file is binary or text */
if (stored_len > 0 && s->strm->data_type == Z_UNKNOWN)
set_data_type(s);
if (s->strm->data_type == Z_UNKNOWN)
s->strm->data_type = detect_data_type(s);
/* Construct the literal and distance trees */
build_tree(s, (tree_desc *)(&(s->l_desc)));
......@@ -1118,24 +1121,45 @@ local void compress_block(s, ltree, dtree)
}
/* ===========================================================================
* Set the data type to BINARY or TEXT, using a crude approximation:
* set it to Z_TEXT if all symbols are either printable characters (33 to 255)
* or white spaces (9 to 13, or 32); or set it to Z_BINARY otherwise.
* Check if the data type is TEXT or BINARY, using the following algorithm:
* - TEXT if the two conditions below are satisfied:
* a) There are no non-portable control characters belonging to the
* "black list" (0..6, 14..25, 28..31).
* b) There is at least one printable character belonging to the
* "white list" (9 {TAB}, 10 {LF}, 13 {CR}, 32..255).
* - BINARY otherwise.
* - The following partially-portable control characters form a
* "gray list" that is ignored in this detection algorithm:
* (7 {BEL}, 8 {BS}, 11 {VT}, 12 {FF}, 26 {SUB}, 27 {ESC}).
* IN assertion: the fields Freq of dyn_ltree are set.
*/
local void set_data_type(s)
local int detect_data_type(s)
deflate_state *s;
{
/* black_mask is the bit mask of black-listed bytes
* set bits 0..6, 14..25, and 28..31
* 0xf3ffc07f = binary 11110011111111111100000001111111
*/
unsigned long black_mask = 0xf3ffc07fUL;
int n;
for (n = 0; n < 9; n++)
/* Check for non-textual ("black-listed") bytes. */
for (n = 0; n <= 31; n++, black_mask >>= 1)
if ((black_mask & 1) && (s->dyn_ltree[n].Freq != 0))
return Z_BINARY;
/* Check for textual ("white-listed") bytes. */
if (s->dyn_ltree[9].Freq != 0 || s->dyn_ltree[10].Freq != 0
|| s->dyn_ltree[13].Freq != 0)
return Z_TEXT;
for (n = 32; n < LITERALS; n++)
if (s->dyn_ltree[n].Freq != 0)
break;
if (n == 9)
for (n = 14; n < 32; n++)
if (s->dyn_ltree[n].Freq != 0)
break;
s->strm->data_type = (n == 32) ? Z_TEXT : Z_BINARY;
return Z_TEXT;
/* There are no "black-listed" or "white-listed" bytes:
* this stream either is empty or has tolerated ("gray-listed") bytes only.
*/
return Z_BINARY;
}
/* ===========================================================================
......
watcom/watcom_f.mak 0 → 100644
浏览文件 @ b1c19ca6
# Makefile for zlib
# OpenWatcom flat model
# Last updated: 28-Dec-2005
# To use, do "wmake -f watcom_f.mak"
C_SOURCE = adler32.c compress.c crc32.c deflate.c &
gzio.c infback.c inffast.c inflate.c &
inftrees.c trees.c uncompr.c zutil.c
OBJS = adler32.obj compress.obj crc32.obj deflate.obj &
gzio.obj infback.obj inffast.obj inflate.obj &
inftrees.obj trees.obj uncompr.obj zutil.obj
CC = wcc386
LINKER = wcl386
CFLAGS = -zq -mf -3r -fp3 -s -bt=dos -oilrtfm -fr=nul -wx
ZLIB_LIB = zlib_f.lib
.C.OBJ:
$(CC) $(CFLAGS) $[@
all: $(ZLIB_LIB) example.exe minigzip.exe
$(ZLIB_LIB): $(OBJS)
wlib -b -c $(ZLIB_LIB) -+adler32.obj -+compress.obj -+crc32.obj
wlib -b -c $(ZLIB_LIB) -+deflate.obj -+gzio.obj -+infback.obj
wlib -b -c $(ZLIB_LIB) -+inffast.obj -+inflate.obj -+inftrees.obj
wlib -b -c $(ZLIB_LIB) -+trees.obj -+uncompr.obj -+zutil.obj
example.exe: $(ZLIB_LIB) example.obj
$(LINKER) -ldos32a -fe=example.exe example.obj $(ZLIB_LIB)
minigzip.exe: $(ZLIB_LIB) minigzip.obj
$(LINKER) -ldos32a -fe=minigzip.exe minigzip.obj $(ZLIB_LIB)
clean: .SYMBOLIC
del *.obj
del $(ZLIB_LIB)
@echo Cleaning done
watcom/watcom_l.mak 0 → 100644
浏览文件 @ b1c19ca6
# Makefile for zlib
# OpenWatcom large model
# Last updated: 28-Dec-2005
# To use, do "wmake -f watcom_l.mak"
C_SOURCE = adler32.c compress.c crc32.c deflate.c &
gzio.c infback.c inffast.c inflate.c &
inftrees.c trees.c uncompr.c zutil.c
OBJS = adler32.obj compress.obj crc32.obj deflate.obj &
gzio.obj infback.obj inffast.obj inflate.obj &
inftrees.obj trees.obj uncompr.obj zutil.obj
CC = wcc
LINKER = wcl
CFLAGS = -zq -ml -s -bt=dos -oilrtfm -fr=nul -wx
ZLIB_LIB = zlib_l.lib
.C.OBJ:
$(CC) $(CFLAGS) $[@
all: $(ZLIB_LIB) example.exe minigzip.exe
$(ZLIB_LIB): $(OBJS)
wlib -b -c $(ZLIB_LIB) -+adler32.obj -+compress.obj -+crc32.obj
wlib -b -c $(ZLIB_LIB) -+deflate.obj -+gzio.obj -+infback.obj
wlib -b -c $(ZLIB_LIB) -+inffast.obj -+inflate.obj -+inftrees.obj
wlib -b -c $(ZLIB_LIB) -+trees.obj -+uncompr.obj -+zutil.obj
example.exe: $(ZLIB_LIB) example.obj
$(LINKER) -fe=example.exe example.obj $(ZLIB_LIB)
minigzip.exe: $(ZLIB_LIB) minigzip.obj
$(LINKER) -fe=minigzip.exe minigzip.obj $(ZLIB_LIB)
clean: .SYMBOLIC
del *.obj
del $(ZLIB_LIB)
@echo Cleaning done
win32/DLL_FAQ.txt
浏览文件 @ b1c19ca6
......@@ -16,7 +16,7 @@ in the zlib distribution, or at the following location:
Pointers to a precompiled ZLIB1.DLL can be found in the zlib
web site at:
http://www.zlib.org/
http://www.zlib.net/
Applications that link to ZLIB1.DLL can rely on the following
specification:
......@@ -350,9 +350,9 @@ in the zlib distribution, or at the following location:
your build is unofficial. You should give it a different file
name, and/or install it in a private directory that can be
accessed by your application only, and is not visible to the
others (e.g. it's not in the SYSTEM or the SYSTEM32 directory,
and it's not in the PATH). Otherwise, your build may clash
with applications that link to the official build.
others (i.e. it's neither in the PATH, nor in the SYSTEM or
SYSTEM32 directories). Otherwise, your build may clash with
applications that link to the official build.
For example, in Cygwin, zlib is linked to the Cygwin runtime
CYGWIN1.DLL, and it is distributed under the name CYGZ.DLL.
......
win32/Makefile.bor
浏览文件 @ b1c19ca6
# Makefile for zlib
# Borland C++ for Win32
#
# Updated for zlib 1.2.x by Cosmin Truta, 11-Mar-2003
# Last updated: 28-Aug-2003
#
# Usage:
# make -f win32/Makefile.bor
# make -f win32/Makefile.bor LOCAL_ZLIB=-DASMV OBJA=match.obj OBJPA=+match.obj
......@@ -99,8 +96,8 @@ minigzip.exe: minigzip.obj $(ZLIB_LIB)
# cleanup
clean:
-del $(ZLIB_LIB)
-del *.obj
-del *.lib
-del *.exe
-del *.tds
-del zlib.bak
......
win32/Makefile.msc
浏览文件 @ b1c19ca6
# Makefile for zlib -- Microsoft (Visual) C
#
# Authors:
# Cosmin Truta, 11-Mar-2003
# Christian Spieler, 19-Mar-2003
#
# Last updated:
# Cosmin Truta, 27-Aug-2003
# Makefile for zlib using Microsoft (Visual) C
# zlib is copyright (C) 1995-2006 Jean-loup Gailly and Mark Adler
#
# Usage:
# nmake -f win32/Makefile.msc (standard build)
......@@ -27,9 +21,10 @@ AS = ml
LD = link
AR = lib
RC = rc
CFLAGS = -nologo -MD -O2 $(LOC)
CFLAGS = -nologo -MD -O2 -Oy- $(LOC)
WFLAGS = -D_CRT_SECURE_NO_DEPRECATE -D_CRT_NONSTDC_NO_DEPRECATE
ASFLAGS = -coff
LDFLAGS = -nologo -release
LDFLAGS = -nologo -debug -release
ARFLAGS = -nologo
RCFLAGS = /dWIN32 /r
......@@ -50,21 +45,31 @@ $(IMPLIB): $(SHAREDLIB)
$(SHAREDLIB): win32/zlib.def $(OBJS) $(OBJA) zlib1.res
$(LD) $(LDFLAGS) -def:win32/zlib.def -dll -implib:$(IMPLIB) \
-out:$@ $(OBJS) $(OBJA) zlib1.res
if exist $@.manifest \
mt -nologo -manifest $@.manifest -outputresource:$@;2
example.exe: example.obj $(STATICLIB)
$(LD) $(LDFLAGS) example.obj $(STATICLIB)
if exist $@.manifest \
mt -nologo -manifest $@.manifest -outputresource:$@;1
minigzip.exe: minigzip.obj $(STATICLIB)
$(LD) $(LDFLAGS) minigzip.obj $(STATICLIB)
if exist $@.manifest \
mt -nologo -manifest $@.manifest -outputresource:$@;1
example_d.exe: example.obj $(IMPLIB)
$(LD) $(LDFLAGS) -out:$@ example.obj $(IMPLIB)
if exist $@.manifest \
mt -nologo -manifest $@.manifest -outputresource:$@;1
minigzip_d.exe: minigzip.obj $(IMPLIB)
$(LD) $(LDFLAGS) -out:$@ minigzip.obj $(IMPLIB)
if exist $@.manifest \
mt -nologo -manifest $@.manifest -outputresource:$@;1
.c.obj:
$(CC) -c $(CFLAGS) $<
$(CC) -c $(WFLAGS) $(CFLAGS) $<
.asm.obj:
$(AS) -c $(ASFLAGS) $<
......@@ -123,4 +128,6 @@ clean:
-del *.res
-del *.exp
-del *.exe
-del *.pdb
-del *.manifest
-del foo.gz
win32/zlib.def
浏览文件 @ b1c19ca6
此差异已折叠。
win32/zlib1.rc
浏览文件 @ b1c19ca6
此差异已折叠。
zconf.h
浏览文件 @ b1c19ca6
此差异已折叠。
zconf.in.h
浏览文件 @ b1c19ca6
此差异已折叠。
zlib.3
浏览文件 @ b1c19ca6
.TH ZLIB 3 "18 July 2005"
.TH ZLIB 3 "16 August 2006"
.SH NAME
zlib \- compression/decompression library
.SH SYNOPSIS
......@@ -133,7 +133,7 @@ before asking for help.
Send questions and/or comments to zlib@gzip.org,
or (for the Windows DLL version) to Gilles Vollant (info@winimage.com).
.SH AUTHORS
Version 1.2.3
Version 1.2.3.1
Copyright (C) 1995-2005 Jean-loup Gailly (jloup@gzip.org)
and Mark Adler (madler@alumni.caltech.edu).
.LP
......
zlib.h
浏览文件 @ b1c19ca6
此差异已折叠。
zlib.map 0 → 100644
浏览文件 @ b1c19ca6
此差异已折叠。
zlib.pc.in 0 → 100644
浏览文件 @ b1c19ca6
此差异已折叠。
zutil.h
浏览文件 @ b1c19ca6
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或