Skip to content

T
Third Party Zlib

OpenHarmony / Third Party Zlib
1 年多 前同步成功

通知 16
Star 112
Fork 2
T
Third Party Zlib
提交 9c3a5830 编写于 作者: M Mark Adler
浏览文件
操作

zlib 1.2.2.4

上级 6b8233bf
显示空白变更内容
内联 并排
Showing with 1035 addition and 137 deletion
ChangeLog
浏览文件 @ 9c3a5830
ChangeLog file for zlib
Changes in 1.2.2.4 (11 July 2005)
- Add inflatePrime() function for starting inflation at bit boundary
- Avoid some Visual C warnings in deflate.c
- Avoid more silly Visual C warnings in inflate.c and inftrees.c for 64-bit
compile
- Fix some spelling errors in comments [Betts]
- Correct inflateInit2() error return documentation in zlib.h
- Added zran.c example of compressed data random access to examples
directory, shows use of inflatePrime()
- Fix cast for assignments to strm->state in inflate.c and infback.c
- Fix zlibCompileFlags() in zutil.c to use 1L for long shifts [Oberhumer]
- Move declarations of gf2 functions to right place in crc32.c [Oberhumer]
- Add cast in trees.c t avoid a warning [Oberhumer]
- Avoid some warnings in fitblk.c, gun.c, gzjoin.c in examples [Oberhumer]
- Update make_vms.com [Zinser]
- Initialize state->write in inflateReset() since copied in inflate_fast()
- Be more strict on incomplete code sets in inflate_table() and increase
ENOUGH and MAXD -- this repairs a possible security vulnerability for
invalid inflate input. Thanks to Tavis Ormandy and Markus Oberhumer for
discovering the vulnerability and providing test cases.
- Add ia64 support to configure for HP-UX [Smith]
- Add error return to gzread() for format or i/o error [Levin]
- Use malloc.h for OS/2 [Necasek]
Changes in 1.2.2.3 (27 May 2005)
- Replace 1U constants in inflate.c and inftrees.c for 64-bit compile
- Typecast fread() return values in gzio.c [Vollant]
......@@ -511,7 +535,7 @@ Changes in 1.0.7 (20 Jan 1998)
Changes in 1.0.6 (19 Jan 1998)
- add functions gzprintf, gzputc, gzgetc, gztell, gzeof, gzseek, gzrewind and
gzsetparams (thanks to Roland Giersig and Kevin Ruland for some of this code)
- Fix a deflate bug occuring only with compression level 0 (thanks to
- Fix a deflate bug occurring only with compression level 0 (thanks to
Andy Buckler for finding this one).
- In minigzip, pass transparently also the first byte for .Z files.
- return Z_BUF_ERROR instead of Z_OK if output buffer full in uncompress()
......
Makefile
浏览文件 @ 9c3a5830
# Makefile for zlib
# Copyright (C) 1995-2003 Jean-loup Gailly.
# Copyright (C) 1995-2005 Jean-loup Gailly.
# For conditions of distribution and use, see copyright notice in zlib.h
# To compile and test, type:
......@@ -30,7 +30,7 @@ CPP=$(CC) -E
LIBS=libz.a
SHAREDLIB=libz.so
SHAREDLIBV=libz.so.1.2.2.3
SHAREDLIBV=libz.so.1.2.2.4
SHAREDLIBM=libz.so.1
AR=ar rc
......
Makefile.in
浏览文件 @ 9c3a5830
# Makefile for zlib
# Copyright (C) 1995-2003 Jean-loup Gailly.
# Copyright (C) 1995-2005 Jean-loup Gailly.
# For conditions of distribution and use, see copyright notice in zlib.h
# To compile and test, type:
......@@ -30,7 +30,7 @@ CPP=$(CC) -E
LIBS=libz.a
SHAREDLIB=libz.so
SHAREDLIBV=libz.so.1.2.2.3
SHAREDLIBV=libz.so.1.2.2.4
SHAREDLIBM=libz.so.1
AR=ar rc
......
README
浏览文件 @ 9c3a5830
ZLIB DATA COMPRESSION LIBRARY
zlib 1.2.2.3 is a general purpose data compression library. All the code is
zlib 1.2.2.4 is a general purpose data compression library. All the code is
thread safe. The data format used by the zlib library is described by RFCs
(Request for Comments) 1950 to 1952 in the files
http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format)
......@@ -33,7 +33,7 @@ Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan. 1997
issue of Dr. Dobb's Journal; a copy of the article is available in
http://dogma.net/markn/articles/zlibtool/zlibtool.htm
The changes made in version 1.2.2.3 are documented in the file ChangeLog.
The changes made in version 1.2.2.4 are documented in the file ChangeLog.
Unsupported third party contributions are provided in directory "contrib".
......
as400/zlib.inc
浏览文件 @ 9c3a5830
* ZLIB.INC - Interface to the general purpose compression library
*
* ILE RPG400 version by Patrick Monnerat, DATASPHERE.
* Version 1.2.2.3
* Version 1.2.2.4
*
*
* WARNING:
......@@ -22,8 +22,8 @@
*
* Versioning information.
*
D ZLIB_VERSION C '1.2.2.3'
D ZLIB_VERNUM C X'1223'
D ZLIB_VERSION C '1.2.2.4'
D ZLIB_VERNUM C X'1224'
*
* Other equates.
*
......
configure
浏览文件 @ 9c3a5830
......@@ -82,9 +82,16 @@ if test "$gcc" -eq 1 && ($cc -c $cflags $test.c) 2>/dev/null; then
QNX*) # This is for QNX6. I suppose that the QNX rule below is for QNX2,QNX4
# (alain.bonnefoy@icbt.com)
LDSHARED=${LDSHARED-"$cc -shared -Wl,-hlibz.so.1"};;
HP-UX*) LDSHARED=${LDSHARED-"$cc -shared $SFLAGS"}
HP-UX*)
LDSHARED=${LDSHARED-"$cc -shared $SFLAGS"}
case `(uname -m || echo unknown) 2>/dev/null` in
ia64)
shared_ext='.so'
SHAREDLIB='libz.so';;
*)
shared_ext='.sl'
SHAREDLIB='libz.sl';;
esac;;
Darwin*) shared_ext='.dylib'
SHAREDLIB=libz$shared_ext
SHAREDLIBV=libz.$VER$shared_ext
......@@ -100,8 +107,14 @@ else
CFLAGS=${CFLAGS-"-O"}
# LDSHARED=${LDSHARED-"ld -b +vnocompatwarnings"}
LDSHARED=${LDSHARED-"ld -b"}
case `(uname -m || echo unknown) 2>/dev/null` in
ia64)
shared_ext='.so'
SHAREDLIB='libz.so';;
*)
shared_ext='.sl'
SHAREDLIB='libz.sl';;
esac;;
IRIX*) SFLAGS=${CFLAGS-"-ansi -O2 -rpath ."}
CFLAGS=${CFLAGS-"-ansi -O2"}
LDSHARED=${LDSHARED-"cc -shared"};;
......
contrib/infback9/inftree9.c
浏览文件 @ 9c3a5830
......@@ -9,7 +9,7 @@
#define MAXBITS 15
const char inflate9_copyright[] =
" inflate9 1.2.2.3 Copyright 1995-2005 Mark Adler ";
" inflate9 1.2.2.4 Copyright 1995-2005 Mark Adler ";
/*
If you use the zlib library in a product, an acknowledgment is welcome
in the documentation of your product. If for some reason you cannot
......@@ -64,7 +64,7 @@ unsigned short FAR *work;
static const unsigned short lext[31] = { /* Length codes 257..285 extra */
128, 128, 128, 128, 128, 128, 128, 128, 129, 129, 129, 129,
130, 130, 130, 130, 131, 131, 131, 131, 132, 132, 132, 132,
133, 133, 133, 133, 144, 66, 71};
133, 133, 133, 133, 144, 206, 69};
static const unsigned short dbase[32] = { /* Distance codes 0..31 base */
1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49,
65, 97, 129, 193, 257, 385, 513, 769, 1025, 1537, 2049, 3073,
......
contrib/vstudio/vc7/zlib.rc
浏览文件 @ 9c3a5830
......@@ -2,8 +2,8 @@
#define IDR_VERSION1 1
IDR_VERSION1 VERSIONINFO MOVEABLE IMPURE LOADONCALL DISCARDABLE
FILEVERSION 1,2,2,3
PRODUCTVERSION 1,2,2,3
FILEVERSION 1,2,2,4
PRODUCTVERSION 1,2,2,4
FILEFLAGSMASK VS_FFI_FILEFLAGSMASK
FILEFLAGS 0
FILEOS VOS_DOS_WINDOWS32
......@@ -17,7 +17,7 @@ BEGIN
BEGIN
VALUE "FileDescription", "zlib data compression library\0"
VALUE "FileVersion", "1.2.2.3\0"
VALUE "FileVersion", "1.2.2.4\0"
VALUE "InternalName", "zlib\0"
VALUE "OriginalFilename", "zlib.dll\0"
VALUE "ProductName", "ZLib.DLL\0"
......
crc32.c
浏览文件 @ 9c3a5830
......@@ -64,6 +64,11 @@
# define TBLS 1
#endif /* BYFOUR */
/* Local functions for crc concatenation */
local unsigned long gf2_matrix_times OF((unsigned long *mat,
unsigned long vec));
local void gf2_matrix_square OF((unsigned long *square, unsigned long *mat));
#ifdef DYNAMIC_CRC_TABLE
local volatile int crc_table_empty = 1;
......@@ -72,10 +77,6 @@ local void make_crc_table OF((void));
#ifdef MAKECRCH
local void write_table OF((FILE *, const unsigned long FAR *));
#endif /* MAKECRCH */
local unsigned long gf2_matrix_times OF((unsigned long *mat,
unsigned long vec));
local void gf2_matrix_square OF((unsigned long *square, unsigned long *mat));
/*
Generate tables for a byte-wise 32-bit CRC calculation on the polynomial:
x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1.
......
deflate.c
浏览文件 @ 9c3a5830
......@@ -52,7 +52,7 @@
#include "deflate.h"
const char deflate_copyright[] =
" deflate 1.2.2.3 Copyright 1995-2005 Jean-loup Gailly ";
" deflate 1.2.2.4 Copyright 1995-2005 Jean-loup Gailly ";
/*
If you use the zlib library in a product, an acknowledgment is welcome
in the documentation of your product. If for some reason you cannot
......@@ -600,10 +600,10 @@ int ZEXPORT deflate (strm, flush)
(s->gzhead->name == Z_NULL ? 0 : 8) +
(s->gzhead->comment == Z_NULL ? 0 : 16)
);
put_byte(s, s->gzhead->time & 0xff);
put_byte(s, (s->gzhead->time >> 8) & 0xff);
put_byte(s, (s->gzhead->time >> 16) & 0xff);
put_byte(s, (s->gzhead->time >> 24) & 0xff);
put_byte(s, (Byte)(s->gzhead->time & 0xff));
put_byte(s, (Byte)((s->gzhead->time >> 8) & 0xff));
put_byte(s, (Byte)((s->gzhead->time >> 16) & 0xff));
put_byte(s, (Byte)((s->gzhead->time >> 24) & 0xff));
put_byte(s, s->level == 9 ? 2 :
(s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
4 : 0));
......@@ -651,7 +651,7 @@ int ZEXPORT deflate (strm, flush)
#ifdef GZIP
if (s->status == EXTRA_STATE) {
if (s->gzhead->extra != NULL) {
int beg = s->pending; /* start of bytes to update crc */
uInt beg = s->pending; /* start of bytes to update crc */
while (s->gzindex < (s->gzhead->extra_len & 0xffff)) {
if (s->pending == s->pending_buf_size) {
......@@ -679,7 +679,7 @@ int ZEXPORT deflate (strm, flush)
}
if (s->status == NAME_STATE) {
if (s->gzhead->name != NULL) {
int beg = s->pending; /* start of bytes to update crc */
uInt beg = s->pending; /* start of bytes to update crc */
int val;
do {
......@@ -710,7 +710,7 @@ int ZEXPORT deflate (strm, flush)
}
if (s->status == COMMENT_STATE) {
if (s->gzhead->comment != NULL) {
int beg = s->pending; /* start of bytes to update crc */
uInt beg = s->pending; /* start of bytes to update crc */
int val;
do {
......@@ -742,8 +742,8 @@ int ZEXPORT deflate (strm, flush)
if (s->pending + 2 > s->pending_buf_size)
flush_pending(strm);
if (s->pending + 2 <= s->pending_buf_size) {
put_byte(s, strm->adler & 0xff);
put_byte(s, (strm->adler >> 8) & 0xff);
put_byte(s, (Byte)(strm->adler & 0xff));
put_byte(s, (Byte)((strm->adler >> 8) & 0xff));
strm->adler = crc32(0L, Z_NULL, 0);
s->status = BUSY_STATE;
}
......@@ -1303,6 +1303,7 @@ local void fill_window(s)
later. (Using level 0 permanently is not an optimal usage of
zlib, so we don't care about this pathological case.)
*/
/* %%% avoid this when Z_RLE */
n = s->hash_size;
p = &s->head[n];
do {
......@@ -1672,3 +1673,64 @@ local block_state deflate_slow(s, flush)
return flush == Z_FINISH ? finish_done : block_done;
}
#endif /* FASTEST */
#if 0
/* ===========================================================================
* For Z_RLE, simply look for runs of bytes, generate matches only of distance
* one. Do not maintain a hash table. (It will be regenerated if this run of
* deflate switches away from Z_RLE.)
*/
local block_state deflate_rle(s, flush)
deflate_state *s;
int flush;
{
int bflush; /* set if current block must be flushed */
uInt run; /* length of run */
uInt max; /* maximum length of run */
uInt prev; /* byte at distance one to match */
Bytef *scan; /* scan for end of run */
for (;;) {
/* Make sure that we always have enough lookahead, except
* at the end of the input file. We need MAX_MATCH bytes
* for the longest encodable run.
*/
if (s->lookahead < MAX_MATCH) {
fill_window(s);
if (s->lookahead < MAX_MATCH && flush == Z_NO_FLUSH) {
return need_more;
}
if (s->lookahead == 0) break; /* flush the current block */
}
/* See how many times the previous byte repeats */
run = 0;
if (s->strstart > 0) { /* if there is a previous byte, that is */
max = s->lookahead < MAX_MATCH ? s->lookahead : MAX_MATCH;
scan = s->window + s->strstart - 1;
prev = *scan++;
do {
if (*scan++ != prev)
break;
} while (++run < max);
}
/* Emit match if have run of MIN_MATCH or longer, else emit literal */
if (run >= MIN_MATCH) {
check_match(s, s->strstart, s->strstart - 1, run);
_tr_tally_dist(s, 1, run - MIN_MATCH, bflush);
s->lookahead -= run;
s->strstart += run;
} else {
/* No match, output a literal byte */
Tracevv((stderr,"%c", s->window[s->strstart]));
_tr_tally_lit (s, s->window[s->strstart], bflush);
s->lookahead--;
s->strstart++;
}
if (bflush) FLUSH_BLOCK(s, 0);
}
FLUSH_BLOCK(s, flush == Z_FINISH);
return flush == Z_FINISH ? finish_done : block_done;
}
#endif
deflate.h
浏览文件 @ 9c3a5830
......@@ -97,10 +97,10 @@ typedef struct internal_state {
Bytef *pending_buf; /* output still pending */
ulg pending_buf_size; /* size of pending_buf */
Bytef *pending_out; /* next pending byte to output to the stream */
int pending; /* nb of bytes in the pending buffer */
uInt pending; /* nb of bytes in the pending buffer */
int wrap; /* bit 0 true for zlib, bit 1 true for gzip */
gz_headerp gzhead; /* gzip header information to write */
int gzindex; /* where in extra, name, or comment */
uInt gzindex; /* where in extra, name, or comment */
Byte method; /* STORED (for zip only) or DEFLATED */
int last_flush; /* value of flush param for previous deflate call */
......
examples/README.examples
浏览文件 @ 9c3a5830
......@@ -35,3 +35,8 @@ zpipe.c
reads and writes zlib streams from stdin to stdout
- illustrates the proper use of deflate() and inflate()
- deeply commented in zlib_how.html (see above)
zran.c
index a zlib or gzip stream and randomly access it
- illustrates the use of Z_BLOCK, inflatePrime(), and
inflateSetDictionary() to provide random access
examples/fitblk.c
浏览文件 @ 9c3a5830
......@@ -73,7 +73,7 @@ local void quit(char *why)
local int partcompress(FILE *in, z_streamp def)
{
int ret, flush;
char raw[RAWLEN];
unsigned char raw[RAWLEN];
flush = Z_NO_FLUSH;
do {
......@@ -96,7 +96,7 @@ local int partcompress(FILE *in, z_streamp def)
local int recompress(z_streamp inf, z_streamp def)
{
int ret, flush;
char raw[RAWLEN];
unsigned char raw[RAWLEN];
flush = Z_NO_FLUSH;
do {
......@@ -129,8 +129,8 @@ int main(int argc, char **argv)
int ret; /* return code */
unsigned size; /* requested fixed output block size */
unsigned have; /* bytes written by deflate() call */
char *blk; /* intermediate and final stream */
char *tmp; /* close to desired size stream */
unsigned char *blk; /* intermediate and final stream */
unsigned char *tmp; /* close to desired size stream */
z_stream def, inf; /* zlib deflate and inflate states */
/* get requested output size */
......@@ -163,8 +163,7 @@ int main(int argc, char **argv)
if (ret == Z_STREAM_END && def.avail_out >= EXCESS) {
/* write block to stdout */
have = size + EXCESS - def.avail_out;
ret = fwrite(blk, 1, have, stdout);
if (ret != have || ferror(stdout))
if (fwrite(blk, 1, have, stdout) != have || ferror(stdout))
quit("error writing output");
/* clean up and print results to stderr */
......@@ -217,8 +216,7 @@ int main(int argc, char **argv)
/* done -- write block to stdout */
have = size - def.avail_out;
ret = fwrite(blk, 1, have, stdout);
if (ret != have || ferror(stdout))
if (fwrite(blk, 1, have, stdout) != have || ferror(stdout))
quit("error writing output");
/* clean up and print results to stderr */
......
examples/gun.c
浏览文件 @ 9c3a5830
/* gun.c -- simple gunzip to give an example of the use of inflateBack()
* Copyright (C) 2003, 2005 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
Version 1.2 20 March 2005 Mark Adler */
Version 1.3 12 June 2005 Mark Adler */
/* Version history:
1.0 16 Feb 2003 First version for testing of inflateBack()
......@@ -14,6 +14,7 @@
Add a bunch of comments
1.2 20 Mar 2005 Add Unix compress (LZW) decompression
Copy file attributes from input file to output file
1.3 12 Jun 2005 Add casts for error messages [Oberhumer]
*/
/*
......@@ -221,12 +222,12 @@ local int lunpipe(unsigned have, unsigned char *next, struct ind *indp,
if (last == -1)
return Z_BUF_ERROR;
if (flags & 0x60) {
strm->msg = "unknown lzw flags set";
strm->msg = (char *)"unknown lzw flags set";
return Z_DATA_ERROR;
}
max = flags & 0x1f;
if (max < 9 || max > 16) {
strm->msg = "lzw bits out of range";
strm->msg = (char *)"lzw bits out of range";
return Z_DATA_ERROR;
}
if (max == 9) /* 9 doesn't really mean 9 */
......@@ -246,7 +247,7 @@ local int lunpipe(unsigned have, unsigned char *next, struct ind *indp,
if (NEXT() == -1) /* missing a bit */
return Z_BUF_ERROR;
if (last & 1) { /* code must be < 256 */
strm->msg = "invalid lzw code";
strm->msg = (char *)"invalid lzw code";
return Z_DATA_ERROR;
}
rem = (unsigned)last >> 1; /* remaining 7 bits */
......@@ -313,7 +314,7 @@ local int lunpipe(unsigned have, unsigned char *next, struct ind *indp,
to detect random or corrupted input after a compress header.
In any case, the prev > end check must be retained. */
if (code != end + 1 || prev > end) {
strm->msg = "invalid lzw code";
strm->msg = (char *)"invalid lzw code";
return Z_DATA_ERROR;
}
match[stack++] = (unsigned char)final;
......@@ -394,7 +395,7 @@ local int gunpipe(z_stream *strm, int infile, int outfile)
break; /* empty gzip stream is ok */
}
if (last != 31 || (NEXT() != 139 && last != 157)) {
strm->msg = "incorrect header check";
strm->msg = (char *)"incorrect header check";
ret = first ? Z_DATA_ERROR : Z_ERRNO;
break; /* not a gzip or compress header */
}
......@@ -410,7 +411,7 @@ local int gunpipe(z_stream *strm, int infile, int outfile)
ret = Z_BUF_ERROR;
if (NEXT() != 8) { /* only deflate method allowed */
if (last == -1) break;
strm->msg = "unknown compression method";
strm->msg = (char *)"unknown compression method";
ret = Z_DATA_ERROR;
break;
}
......@@ -423,7 +424,7 @@ local int gunpipe(z_stream *strm, int infile, int outfile)
NEXT();
if (last == -1) break;
if (flags & 0xe0) {
strm->msg = "unknown header flags set";
strm->msg = (char *)"unknown header flags set";
ret = Z_DATA_ERROR;
break;
}
......@@ -476,7 +477,7 @@ local int gunpipe(z_stream *strm, int infile, int outfile)
NEXT() != ((outd.crc >> 24) & 0xff)) {
/* crc error */
if (last != -1) {
strm->msg = "incorrect data check";
strm->msg = (char *)"incorrect data check";
ret = Z_DATA_ERROR;
}
break;
......@@ -487,7 +488,7 @@ local int gunpipe(z_stream *strm, int infile, int outfile)
NEXT() != ((outd.total >> 24) & 0xff)) {
/* length error */
if (last != -1) {
strm->msg = "incorrect length check";
strm->msg = (char *)"incorrect length check";
ret = Z_DATA_ERROR;
}
break;
......@@ -641,7 +642,7 @@ int main(int argc, char **argv)
argv++;
test = 0;
if (argc && strcmp(*argv, "-h") == 0) {
fprintf(stderr, "gun 1.2 (20 Mar 2005)\n");
fprintf(stderr, "gun 1.3 (12 Jun 2005)\n");
fprintf(stderr, "Copyright (c) 2005 Mark Adler\n");
fprintf(stderr, "usage: gun [-t] [file1.gz [file2.Z ...]]\n");
return 0;
......
examples/gzjoin.c
浏览文件 @ 9c3a5830
......@@ -26,6 +26,7 @@
* Change history:
*
* 1.0 11 Dec 2004 - First version
* 1.1 12 Jun 2005 - Changed ssize_t to long for portability
*/
/*
......@@ -118,7 +119,7 @@ local bin *bopen(char *name)
1 indicating that end-of-file was reached */
local int bload(bin *in)
{
ssize_t len;
long len;
if (in == NULL)
return -1;
......@@ -126,7 +127,7 @@ local int bload(bin *in)
return 0;
in->next = in->buf;
do {
len = read(in->fd, in->buf + in->left, CHUNK - in->left);
len = (long)read(in->fd, in->buf + in->left, CHUNK - in->left);
if (len < 0)
return -1;
in->left += (unsigned)len;
......
examples/zran.c 0 → 100644
浏览文件 @ 9c3a5830
/* zran.c -- example of zlib/gzip stream indexing and random access
* Copyright (C) 2005 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
Version 1.0 29 May 2005 Mark Adler */
/* Illustrate the use of Z_BLOCK, inflatePrime(), and inflateSetDictionary()
for random access of a compressed file. A file containing a zlib or gzip
stream is provided on the command line. The compressed stream is decoded in
its entirety, and an index built with access points about every SPAN bytes
in the uncompressed output. The compressed file is left open, and can then
be read randomly, having to decompress on the average SPAN/2 uncompressed
bytes before getting to the desired block of data.
An access point can be created at the start of any deflate block, by saving
the starting file offset and bit of that block, and the 32K bytes of
uncompressed data that precede that block. Also the uncompressed offset of
that block is saved to provide a referece for locating a desired starting
point in the uncompressed stream. build_index() works by decompressing the
input zlib or gzip stream a block at a time, and at the end of each block
deciding if enough uncompressed data has gone by to justify the creation of
a new access point. If so, that point is saved in a data structure that
grows as needed to accommodate the points.
To use the index, an offset in the uncompressed data is provided, for which
the latest accees point at or preceding that offset is located in the index.
The input file is positioned to the specified location in the index, and if
necessary the first few bits of the compressed data is read from the file.
inflate is initialized with those bits and the 32K of uncompressed data, and
the decompression then proceeds until the desired offset in the file is
reached. Then the decompression continues to read the desired uncompressed
data from the file.
Another approach would be to generate the index on demand. In that case,
requests for random access reads from the compressed data would try to use
the index, but if a read far enough past the end of the index is required,
then further index entries would be generated and added.
There is some fair bit of overhead to starting inflation for the random
access, mainly copying the 32K byte dictionary. So if small pieces of the
file are being accessed, it would make sense to implement a cache to hold
some lookahead and avoid many calls to extract() for small lengths.
Another way to build an index would be to use inflateCopy(). That would
not be constrained to have access points at block boundaries, but requires
more memory per access point, and also cannot be saved to file due to the
use of pointers in the state. The approach here allows for storage of the
index in a file.
*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "zlib.h"
#define local static
#define SPAN 1048576L /* desired distance between access points */
#define WINSIZE 32768U /* sliding window size */
#define CHUNK 16384 /* file input buffer size */
/* access point entry */
struct point {
off_t out; /* corresponding offset in uncompressed data */
off_t in; /* offset in input file of first full byte */
int bits; /* number of bits (1-7) from byte at in - 1, or 0 */
unsigned char window[WINSIZE]; /* preceding 32K of uncompressed data */
};
/* access point list */
struct access {
int have; /* number of list entries filled in */
int size; /* number of list entries allocated */
struct point *list; /* allocated list */
};
/* Deallocate an index built by build_index() */
local void free_index(struct access *index)
{
if (index != NULL) {
free(index->list);
free(index);
}
}
/* Add an entry to the access point list. If out of memory, deallocate the
existing list and return NULL. */
local struct access *addpoint(struct access *index, int bits,
off_t in, off_t out, unsigned left, unsigned char *window)
{
struct point *next;
/* if list is empty, create it (start with eight points) */
if (index == NULL) {
index = malloc(sizeof(struct access));
if (index == NULL) return NULL;
index->list = malloc(sizeof(struct point) << 3);
if (index->list == NULL) {
free(index);
return NULL;
}
index->size = 8;
index->have = 0;
}
/* if list is full, make it bigger */
else if (index->have == index->size) {
index->size <<= 1;
next = realloc(index->list, sizeof(struct point) * index->size);
if (next == NULL) {
free_index(index);
return NULL;
}
index->list = next;
}
/* fill in entry and increment how many we have */
next = index->list + index->have;
next->bits = bits;
next->in = in;
next->out = out;
if (left)
memcpy(next->window, window + WINSIZE - left, left);
if (left < WINSIZE)
memcpy(next->window + left, window, WINSIZE - left);
index->have++;
/* return list, possibly reallocated */
return index;
}
/* Make one entire pass through the compressed stream and build an index, with
access points about every span bytes of uncompressed output -- span is
chosen to balance the speed of random access against the memory requirements
of the list, about 32K bytes per access point. Note that data after the end
of the first zlib or gzip stream in the file is ignored. build_index()
returns the number of access points on success (>= 1), Z_MEM_ERROR for out
of memory, Z_DATA_ERROR for an error in the input file, or Z_ERRNO for a
file read error. On success, *built points to the resulting index. */
local int build_index(FILE *in, off_t span, struct access **built)
{
int ret;
off_t totin, totout; /* our own total counters to avoid 4GB limit */
off_t last; /* totout value of last access point */
struct access *index; /* access points being generated */
z_stream strm;
unsigned char input[CHUNK];
unsigned char window[WINSIZE];
/* initialize inflate */
strm.zalloc = Z_NULL;
strm.zfree = Z_NULL;
strm.opaque = Z_NULL;
strm.avail_in = 0;
strm.next_in = Z_NULL;
ret = inflateInit2(&strm, 47); /* automatic zlib or gzip decoding */
if (ret != Z_OK)
return ret;
/* inflate the input, maintain a sliding window, and build an index -- this
also validates the integrity of the compressed data using the check
information at the end of the gzip or zlib stream */
totin = totout = last = 0;
index = NULL; /* will be allocated by first addpoint() */
strm.avail_out = 0;
do {
/* get some compressed data from input file */
strm.avail_in = fread(input, 1, CHUNK, in);
if (ferror(in)) {
ret = Z_ERRNO;
goto build_index_error;
}
if (strm.avail_in == 0) {
ret = Z_DATA_ERROR;
goto build_index_error;
}
strm.next_in = input;
/* process all of that, or until end of stream */
do {
/* reset sliding window if necessary */
if (strm.avail_out == 0) {
strm.avail_out = WINSIZE;
strm.next_out = window;
}
/* inflate until out of input, output, or at end of block --
update the total input and output counters */
totin += strm.avail_in;
totout += strm.avail_out;
ret = inflate(&strm, Z_BLOCK); /* return at end of block */
totin -= strm.avail_in;
totout -= strm.avail_out;
if (ret == Z_NEED_DICT)
ret = Z_DATA_ERROR;
if (ret == Z_MEM_ERROR || ret == Z_DATA_ERROR)
goto build_index_error;
if (ret == Z_STREAM_END)
break;
/* if at end of block, consider adding an index entry (note that if
data_type indicates an end-of-block, then all of the
uncompressed data from that block has been delivered, and none
of the compressed data after that block has been consumed,
except for up to seven bits) -- the totout == 0 provides an
entry point after the zlib or gzip header, and assures that the
index always has at least one access point; we avoid creating an
access point after the last block by checking bit 6 of data_type
*/
if ((strm.data_type & 128) && !(strm.data_type & 64) &&
(totout == 0 || totout - last > span)) {
index = addpoint(index, strm.data_type & 7, totin,
totout, strm.avail_out, window);
if (index == NULL) {
ret = Z_MEM_ERROR;
goto build_index_error;
}
last = totout;
}
} while (strm.avail_in != 0);
} while (ret != Z_STREAM_END);
/* clean up and return index (release unused entries in list) */
(void)inflateEnd(&strm);
index = realloc(index, sizeof(struct point) * index->have);
index->size = index->have;
*built = index;
return index->size;
/* return error */
build_index_error:
(void)inflateEnd(&strm);
if (index != NULL)
free_index(index);
return ret;
}
/* Use the index to read len bytes from offset into buf, return bytes read or
negative for error (Z_DATA_ERROR or Z_MEM_ERROR). If data is requested past
the end of the uncompressed data, then extract() will return a value less
than len, indicating how much as actually read into buf. This function
should not return a data error unless the file was modified since the index
was generated. extract() may also return Z_ERRNO if there is an error on
reading or seeking the input file. */
local int extract(FILE *in, struct access *index, off_t offset,
unsigned char *buf, int len)
{
int ret, skip;
z_stream strm;
struct point *here;
unsigned char input[CHUNK];
unsigned char discard[WINSIZE];
/* proceed only if something reasonable to do */
if (len < 0)
return 0;
/* find where in stream to start */
here = index->list;
ret = index->have;
while (--ret && here[1].out <= offset)
here++;
/* initialize file and inflate state to start there */
strm.zalloc = Z_NULL;
strm.zfree = Z_NULL;
strm.opaque = Z_NULL;
strm.avail_in = 0;
strm.next_in = Z_NULL;
ret = inflateInit2(&strm, -15); /* raw inflate */
if (ret != Z_OK)
return ret;
ret = fseeko(in, here->in - (here->bits ? 1 : 0), SEEK_SET);
if (ret == -1)
goto extract_ret;
if (here->bits) {
ret = getc(in);
if (ret == -1) {
ret = ferror(in) ? Z_ERRNO : Z_DATA_ERROR;
goto extract_ret;
}
(void)inflatePrime(&strm, here->bits, ret >> (8 - here->bits));
}
(void)inflateSetDictionary(&strm, here->window, WINSIZE);
/* skip uncompressed bytes until offset reached, then satisfy request */
offset -= here->out;
strm.avail_in = 0;
skip = 1; /* while skipping to offset */
do {
/* define where to put uncompressed data, and how much */
if (offset == 0 && skip) { /* at offset now */
strm.avail_out = len;
strm.next_out = buf;
skip = 0; /* only do this once */
}
if (offset > WINSIZE) { /* skip WINSIZE bytes */
strm.avail_out = WINSIZE;
strm.next_out = discard;
offset -= WINSIZE;
}
else if (offset != 0) { /* last skip */
strm.avail_out = (unsigned)offset;
strm.next_out = discard;
offset = 0;
}
/* uncompress until avail_out filled, or end of stream */
do {
if (strm.avail_in == 0) {
strm.avail_in = fread(input, 1, CHUNK, in);
if (ferror(in)) {
ret = Z_ERRNO;
goto extract_ret;
}
if (strm.avail_in == 0) {
ret = Z_DATA_ERROR;
goto extract_ret;
}
strm.next_in = input;
}
ret = inflate(&strm, Z_NO_FLUSH); /* normal inflate */
if (ret == Z_NEED_DICT)
ret = Z_DATA_ERROR;
if (ret == Z_MEM_ERROR || ret == Z_DATA_ERROR)
goto extract_ret;
if (ret == Z_STREAM_END)
break;
} while (strm.avail_out != 0);
/* if reach end of stream, then don't keep trying to get more */
if (ret == Z_STREAM_END)
break;
/* do until offset reached and requested data read, or stream ends */
} while (skip);
/* compute number of uncompressed bytes read after offset */
ret = skip ? 0 : len - strm.avail_out;
/* clean up and return bytes read or error */
extract_ret:
(void)inflateEnd(&strm);
return ret;
}
/* Demonstrate the use of build_index() and extract() by processing the file
provided on the command line, and the extracting 16K from about 2/3rds of
the way through the uncompressed output, and writing that to stdout. */
int main(int argc, char **argv)
{
int len;
off_t offset;
FILE *in;
struct access *index;
unsigned char buf[CHUNK];
/* open input file */
if (argc != 2) {
fprintf(stderr, "usage: zran file.gz\n");
return 1;
}
in = fopen(argv[1], "rb");
if (in == NULL) {
fprintf(stderr, "zran: could not open %s for reading\n", argv[1]);
return 1;
}
/* build index */
len = build_index(in, SPAN, &index);
if (len < 0) {
fclose(in);
switch (len) {
case Z_MEM_ERROR:
fprintf(stderr, "zran: out of memory\n");
break;
case Z_DATA_ERROR:
fprintf(stderr, "zran: compressed data error in %s\n", argv[1]);
break;
case Z_ERRNO:
fprintf(stderr, "zran: read error on %s\n", argv[1]);
break;
default:
fprintf(stderr, "zran: error %d while building index\n", len);
}
return 1;
}
fprintf(stderr, "zran: built index with %d access points\n", len);
/* use index by reading some bytes from an arbitrary offset */
offset = (index->list[index->have - 1].out << 1) / 3;
len = extract(in, index, offset, buf, CHUNK);
if (len < 0)
fprintf(stderr, "zran: extraction failed: %s error\n",
len == Z_MEM_ERROR ? "out of memory" : "input corrupted");
else {
fwrite(buf, 1, len, stdout);
fprintf(stderr, "zran: extracted %d bytes at %llu\n", len, offset);
}
/* clean up and exit */
free_index(index);
fclose(in);
return 0;
}
gzio.c
浏览文件 @ 9c3a5830
......@@ -489,6 +489,9 @@ int ZEXPORT gzread (file, buf, len)
}
s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start));
if (len == s->stream.avail_out &&
(s->z_err == Z_DATA_ERROR || s->z_err == Z_ERRNO))
return -1;
return (int)(len - s->stream.avail_out);
}
......@@ -975,9 +978,9 @@ int ZEXPORT gzclose (file)
#endif
/* ===========================================================================
Returns the error message for the last error which occured on the
Returns the error message for the last error which occurred on the
given compressed file. errnum is set to zlib error number. If an
error occured in the file system and not in the compression library,
error occurred in the file system and not in the compression library,
errnum is set to Z_ERRNO and the application may consult errno
to get the exact error code.
*/
......
infback.c
浏览文件 @ 9c3a5830
/* infback.c -- inflate using a call-back interface
* Copyright (C) 1995-2004 Mark Adler
* Copyright (C) 1995-2005 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
......@@ -50,7 +50,7 @@ int stream_size;
sizeof(struct inflate_state));
if (state == Z_NULL) return Z_MEM_ERROR;
Tracev((stderr, "inflate: allocated\n"));
strm->state = (voidpf)state;
strm->state = (struct internal_state FAR *)state;
state->dmax = 32768U;
state->wbits = windowBits;
state->wsize = 1U << windowBits;
......
inflate.c
浏览文件 @ 9c3a5830
......@@ -117,6 +117,7 @@ z_streamp strm;
state->head = Z_NULL;
state->wsize = 0;
state->whave = 0;
state->write = 0;
state->hold = 0;
state->bits = 0;
state->lencode = state->distcode = state->next = state->codes;
......@@ -124,6 +125,22 @@ z_streamp strm;
return Z_OK;
}
int ZEXPORT inflatePrime(strm, bits, value)
z_streamp strm;
int bits;
int value;
{
struct inflate_state FAR *state;
if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
state = (struct inflate_state FAR *)strm->state;
if (bits > 16 || state->bits + bits > 32) return Z_STREAM_ERROR;
value &= (1L << bits) - 1;
state->hold += value << state->bits;
state->bits += bits;
return Z_OK;
}
int ZEXPORT inflateInit2_(strm, windowBits, version, stream_size)
z_streamp strm;
int windowBits;
......@@ -146,7 +163,7 @@ int stream_size;
ZALLOC(strm, 1, sizeof(struct inflate_state));
if (state == Z_NULL) return Z_MEM_ERROR;
Tracev((stderr, "inflate: allocated\n"));
strm->state = (voidpf)state;
strm->state = (struct internal_state FAR *)state;
if (windowBits < 0) {
state->wrap = 0;
windowBits = -windowBits;
......@@ -1310,6 +1327,7 @@ z_streamp source;
struct inflate_state FAR *state;
struct inflate_state FAR *copy;
unsigned char FAR *window;
unsigned wsize;
/* check input */
if (dest == Z_NULL || source == Z_NULL || source->state == Z_NULL ||
......@@ -1335,15 +1353,16 @@ z_streamp source;
zmemcpy(dest, source, sizeof(z_stream));
zmemcpy(copy, state, sizeof(struct inflate_state));
if (state->lencode >= state->codes &&
state->lencode <= state->codes + ENOUGH - 1)
{
state->lencode <= state->codes + ENOUGH - 1) {
copy->lencode = copy->codes + (state->lencode - state->codes);
copy->distcode = copy->codes + (state->distcode - state->codes);
}
copy->next = copy->codes + (state->next - state->codes);
if (window != Z_NULL)
zmemcpy(window, state->window, (uInt)(1U << state->wbits));
if (window != Z_NULL) {
wsize = 1U << state->wbits;
zmemcpy(window, state->window, wsize);
}
copy->window = window;
dest->state = (voidpf)copy;
dest->state = (struct internal_state FAR *)copy;
return Z_OK;
}
inftrees.c
浏览文件 @ 9c3a5830
......@@ -9,7 +9,7 @@
#define MAXBITS 15
const char inflate_copyright[] =
" inflate 1.2.2.3 Copyright 1995-2005 Mark Adler ";
" inflate 1.2.2.4 Copyright 1995-2005 Mark Adler ";
/*
If you use the zlib library in a product, an acknowledgment is welcome
in the documentation of your product. If for some reason you cannot
......@@ -62,7 +62,7 @@ unsigned short FAR *work;
35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
static const unsigned short lext[31] = { /* Length codes 257..285 extra */
16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 66, 71};
19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 206, 69};
static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
......@@ -134,7 +134,7 @@ unsigned short FAR *work;
left -= count[len];
if (left < 0) return -1; /* over-subscribed */
}
if (left > 0 && (type == CODES || (codes - count[0] != 1)))
if (left > 0 && (type == CODES || max != 1))
return -1; /* incomplete set */
/* generate offsets into symbol table for each length for sorting */
......@@ -232,6 +232,7 @@ unsigned short FAR *work;
/* replicate for those indices with low len bits equal to huff */
incr = 1U << (len - drop);
fill = 1U << curr;
min = fill; /* save offset to next table */
do {
fill -= incr;
next[(huff >> drop) + fill] = this;
......@@ -262,7 +263,7 @@ unsigned short FAR *work;
drop = root;
/* increment past last table */
next += (unsigned)(1U << curr);
next += min; /* here min is 1 << curr */
/* determine length of next table */
curr = len - drop;
......
inftrees.h
浏览文件 @ 9c3a5830
/* inftrees.h -- header to use inftrees.c
* Copyright (C) 1995-2003 Mark Adler
* Copyright (C) 1995-2005 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
......@@ -36,12 +36,12 @@ typedef struct {
*/
/* Maximum size of dynamic tree. The maximum found in a long but non-
exhaustive search was 1004 code structures (850 for length/literals
and 154 for distances, the latter actually the result of an
exhaustive search was 1444 code structures (852 for length/literals
and 592 for distances, the latter actually the result of an
exhaustive search). The true maximum is not known, but the value
below is more than safe. */
#define ENOUGH 1440
#define MAXD 154
#define ENOUGH 2048
#define MAXD 592
/* Type of code to build for inftable() */
typedef enum {
......
make_vms.com
浏览文件 @ 9c3a5830
$! make libz under VMS
$! written by Martin P.J. Zinser <m.zinser@gsi.de>
$! make libz under VMS written by
$! Martin P.J. Zinser
$! <zinser@zinser.no-ip.info or zinser@sysdev.deutsche-boerse.com>
$!
$! Look for the compiler used
$ on error then goto err_exit
$!
$!
$! Just some general constants...
$!
$ true = 1
$ false = 0
$ tmpnam = "temp_" + f$getjpi("","pid")
$ SAY = "WRITE SYS$OUTPUT"
$!
$! Setup variables holding "config" information
$!
$ Make = ""
$ name = "Zlib"
$ version = "?.?.?"
$ v_string = "ZLIB_VERSION"
$ v_file = "zlib.h"
$ ccopt = ""
$ if f$getsyi("HW_MODEL").ge.1024
$ lopts = ""
$ linkonly = false
$ optfile = name + ".opt"
$ its_decc = false
$ its_vaxc = false
$ its_gnuc = false
$ axp = f$getsyi("HW_MODEL").ge.1024
$ s_case = false
$! Check for MMK/MMS
$!
$ If F$Search ("Sys$System:MMS.EXE") .nes. "" Then Make = "MMS"
$ If F$Type (MMK) .eqs. "STRING" Then Make = "MMK"
$!
$!
$ gosub find_version
$!
$ gosub check_opts
$!
$! Look for the compiler used
$!
$ gosub check_compiler
$ if its_decc
$ then
$ ccopt = "/prefix=all"+ccopt
$ comp = "__decc__=1"
$ if f$trnlnm("SYS").eqs."" then define sys sys$library:
$ else
$ if f$search("SYS$SYSTEM:DECC$COMPILER.EXE").eqs.""
$ ccopt = "/prefix=all" + ccopt
$ if f$trnlnm("SYS") .eqs. ""
$ then
$ comp = "__vaxc__=1"
$ if f$trnlnm("SYS").eqs."" then define sys sys$library:
$ if axp
$ then
$ define sys sys$library:
$ else
$ if f$trnlnm("SYS").eqs."" then define sys decc$library_include:
$ ccopt = "/decc/prefix=all"+ccopt
$ comp = "__decc__=1"
$ ccopt = "/decc" + ccopt
$ define sys decc$library_include:
$ endif
$ endif
$ endif
$ if its_vaxc .or. its_gnuc
$ then
$ if f$trnlnm("SYS").eqs."" then define sys sys$library:
$ endif
$!
$! Build the thing plain or with mms
$!
$ write sys$output "Compiling Zlib sources ..."
$ if f$search("SYS$SYSTEM:MMS.EXE").eqs.""
$ if make.eqs.""
$ then
$ dele example.obj;*,minigzip.obj;*
$ CALL MAKE adler32.OBJ "CC ''CCOPT' adler32" -
......@@ -32,24 +71,21 @@ $ CALL MAKE adler32.OBJ "CC ''CCOPT' adler32" -
$ CALL MAKE compress.OBJ "CC ''CCOPT' compress" -
compress.c zlib.h zconf.h
$ CALL MAKE crc32.OBJ "CC ''CCOPT' crc32" -
crc32.c crc32.h zlib.h zconf.h zutil.h
crc32.c zlib.h zconf.h
$ CALL MAKE deflate.OBJ "CC ''CCOPT' deflate" -
deflate.c deflate.h zutil.h zlib.h zconf.h
$ CALL MAKE gzio.OBJ "CC ''CCOPT' gzio /define=""NO_vsnprintf""" -
$ CALL MAKE gzio.OBJ "CC ''CCOPT' gzio" -
gzio.c zutil.h zlib.h zconf.h
$ CALL MAKE infback.OBJ "CC ''CCOPT' infback" -
infback.c zutil.h zlib.h zconf.h -
"inftrees.h inflate.h inffast.h inffixed.h"
infback.c zutil.h inftrees.h inflate.h inffast.h inffixed.h
$ CALL MAKE inffast.OBJ "CC ''CCOPT' inffast" -
inffast.c zutil.h zlib.h zconf.h -
"inftrees.h inflate.h inffast.h"
inffast.c zutil.h zlib.h zconf.h inffast.h
$ CALL MAKE inflate.OBJ "CC ''CCOPT' inflate" -
inflate.c zutil.h zlib.h zconf.h -
"inftrees.h inflate.h inffast.h inffixed.h"
inflate.c zutil.h zlib.h zconf.h infblock.h
$ CALL MAKE inftrees.OBJ "CC ''CCOPT' inftrees" -
inftrees.c zutil.h zlib.h zconf.h inftrees.h
$ CALL MAKE trees.OBJ "CC ''CCOPT' trees" -
trees.c trees.h deflate.h zutil.h zlib.h zconf.h
trees.c deflate.h zutil.h zlib.h zconf.h
$ CALL MAKE uncompr.OBJ "CC ''CCOPT' uncompr" -
uncompr.c zlib.h zconf.h
$ CALL MAKE zutil.OBJ "CC ''CCOPT' zutil" -
......@@ -60,17 +96,45 @@ $ write sys$output "Building example..."
$ CALL MAKE example.OBJ "CC ''CCOPT' example" -
example.c zlib.h zconf.h
$ call make example.exe "LINK example,libz.olb/lib" example.obj libz.olb
$ if f$search("x11vms:xvmsutils.olb") .nes. ""
$ then
$ write sys$output "Building minigzip..."
$ CALL MAKE minigzip.OBJ "CC ''CCOPT' minigzip" -
minigzip.c zlib.h zconf.h
$ call make minigzip.exe -
"LINK minigzip,libz.olb/lib" -
"LINK minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib" -
minigzip.obj libz.olb
$ endif
$ else
$ mms/macro=('comp')
$ gosub crea_mms
$ SAY "Make ''name' ''version' with ''Make' "
$ 'make'
$ endif
$!
$! Alpha gets a shareable image
$!
$ If axp
$ Then
$ gosub crea_olist
$ write sys$output "Creating libzshr.exe"
$ call anal_obj_axp modules.opt _link.opt
$ if s_case
$ then
$ open/append optf modules.opt
$ write optf "case_sensitive=YES"
$ close optf
$ endif
$ LINK_'lopts'/SHARE=libzshr.exe modules.opt/opt,_link.opt/opt
$ endif
$ write sys$output "Zlib build completed"
$ exit
$CC_ERR:
$ write sys$output "C compiler required to build ''name'"
$ goto err_exit
$ERR_EXIT:
$ set message/facil/ident/sever/text
$ write sys$output "Exiting..."
$ exit 2
$!
$!
$MAKE: SUBROUTINE !SUBROUTINE TO CHECK DEPENDENCIES
......@@ -112,3 +176,286 @@ $ VV='F$Verify(VV)
$Exit:
$ If V Then Set Verify
$ENDSUBROUTINE
$!------------------------------------------------------------------------------
$!
$! Check command line options and set symbols accordingly
$!
$ CHECK_OPTS:
$ i = 1
$ OPT_LOOP:
$ if i .lt. 9
$ then
$ cparm = f$edit(p'i',"upcase")
$ if cparm .eqs. "DEBUG"
$ then
$ ccopt = ccopt + "/noopt/deb"
$ lopts = lopts + "/deb"
$ endif
$ if f$locate("CCOPT=",cparm) .lt. f$length(cparm)
$ then
$ start = f$locate("=",cparm) + 1
$ len = f$length(cparm) - start
$ ccopt = ccopt + f$extract(start,len,cparm)
$ if f$locate("AS_IS",f$edit(ccopt,"UPCASE")) .lt. f$length(ccopt) -
then s_case = true
$ endif
$ if cparm .eqs. "LINK" then linkonly = true
$ if f$locate("LOPTS=",cparm) .lt. f$length(cparm)
$ then
$ start = f$locate("=",cparm) + 1
$ len = f$length(cparm) - start
$ lopts = lopts + f$extract(start,len,cparm)
$ endif
$ if f$locate("CC=",cparm) .lt. f$length(cparm)
$ then
$ start = f$locate("=",cparm) + 1
$ len = f$length(cparm) - start
$ cc_com = f$extract(start,len,cparm)
if (cc_com .nes. "DECC") .and. -
(cc_com .nes. "VAXC") .and. -
(cc_com .nes. "GNUC")
$ then
$ write sys$output "Unsupported compiler choice ''cc_com' ignored"
$ write sys$output "Use DECC, VAXC, or GNUC instead"
$ else
$ if cc_com .eqs. "DECC" then its_decc = true
$ if cc_com .eqs. "VAXC" then its_vaxc = true
$ if cc_com .eqs. "GNUC" then its_gnuc = true
$ endif
$ endif
$ if f$locate("MAKE=",cparm) .lt. f$length(cparm)
$ then
$ start = f$locate("=",cparm) + 1
$ len = f$length(cparm) - start
$ mmks = f$extract(start,len,cparm)
$ if (mmks .eqs. "MMK") .or. (mmks .eqs. "MMS")
$ then
$ make = mmks
$ else
$ write sys$output "Unsupported make choice ''mmks' ignored"
$ write sys$output "Use MMK or MMS instead"
$ endif
$ endif
$ i = i + 1
$ goto opt_loop
$ endif
$ return
$!------------------------------------------------------------------------------
$!
$! Look for the compiler used
$!
$CHECK_COMPILER:
$ if (.not. (its_decc .or. its_vaxc .or. its_gnuc))
$ then
$ its_decc = (f$search("SYS$SYSTEM:DECC$COMPILER.EXE") .nes. "")
$ its_vaxc = .not. its_decc .and. (F$Search("SYS$System:VAXC.Exe") .nes. "")
$ its_gnuc = .not. (its_decc .or. its_vaxc) .and. (f$trnlnm("gnu_cc") .nes. "")
$ endif
$!
$! Exit if no compiler available
$!
$ if (.not. (its_decc .or. its_vaxc .or. its_gnuc))
$ then goto CC_ERR
$ else
$ if its_decc then write sys$output "CC compiler check ... Compaq C"
$ if its_vaxc then write sys$output "CC compiler check ... VAX C"
$ if its_gnuc then write sys$output "CC compiler check ... GNU C"
$ endif
$ return
$!------------------------------------------------------------------------------
$!
$! If MMS/MMK are available dump out the descrip.mms if required
$!
$CREA_MMS:
$ write sys$output "Creating descrip.mms..."
$ create descrip.mms
$ open/append out descrip.mms
$ copy sys$input: out
$ deck
# descrip.mms: MMS description file for building zlib on VMS
# written by Martin P.J. Zinser
# <zinser@zinser.no-ip.info or zinser@sysdev.deutsche-boerse.com>
OBJS = adler32.obj, compress.obj, crc32.obj, gzio.obj, uncompr.obj, infback.obj\
deflate.obj, trees.obj, zutil.obj, inflate.obj, \
inftrees.obj, inffast.obj
$ eod
$ write out "CFLAGS=", ccopt
$ write out "LOPTS=", lopts
$ copy sys$input: out
$ deck
all : example.exe minigzip.exe libz.olb
@ write sys$output " Example applications available"
libz.olb : libz.olb($(OBJS))
@ write sys$output " libz available"
example.exe : example.obj libz.olb
link $(LOPTS) example,libz.olb/lib
minigzip.exe : minigzip.obj libz.olb
link $(LOPTS) minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib
clean :
delete *.obj;*,libz.olb;*,*.opt;*,*.exe;*
# Other dependencies.
adler32.obj : adler32.c zutil.h zlib.h zconf.h
compress.obj : compress.c zlib.h zconf.h
crc32.obj : crc32.c zutil.h zlib.h zconf.h
deflate.obj : deflate.c deflate.h zutil.h zlib.h zconf.h
example.obj : example.c zlib.h zconf.h
gzio.obj : gzio.c zutil.h zlib.h zconf.h
inffast.obj : inffast.c zutil.h zlib.h zconf.h inftrees.h inffast.h
inflate.obj : inflate.c zutil.h zlib.h zconf.h
inftrees.obj : inftrees.c zutil.h zlib.h zconf.h inftrees.h
minigzip.obj : minigzip.c zlib.h zconf.h
trees.obj : trees.c deflate.h zutil.h zlib.h zconf.h
uncompr.obj : uncompr.c zlib.h zconf.h
zutil.obj : zutil.c zutil.h zlib.h zconf.h
infback.obj : infback.c zutil.h inftrees.h inflate.h inffast.h inffixed.h
$ eod
$ close out
$ return
$!------------------------------------------------------------------------------
$!
$! Read list of core library sources from makefile.in and create options
$! needed to build shareable image
$!
$CREA_OLIST:
$ open/read min makefile.in
$ open/write mod modules.opt
$ src_check = "OBJS ="
$MRLOOP:
$ read/end=mrdone min rec
$ if (f$extract(0,6,rec) .nes. src_check) then goto mrloop
$ rec = rec - src_check
$ gosub extra_filnam
$ if (f$element(1,"\",rec) .eqs. "\") then goto mrdone
$MRSLOOP:
$ read/end=mrdone min rec
$ gosub extra_filnam
$ if (f$element(1,"\",rec) .nes. "\") then goto mrsloop
$MRDONE:
$ close min
$ close mod
$ return
$!------------------------------------------------------------------------------
$!
$! Take record extracted in crea_olist and split it into single filenames
$!
$EXTRA_FILNAM:
$ myrec = f$edit(rec - "\", "trim,compress")
$ i = 0
$FELOOP:
$ srcfil = f$element(i," ", myrec)
$ if (srcfil .nes. " ")
$ then
$ write mod f$parse(srcfil,,,"NAME"), ".obj"
$ i = i + 1
$ goto feloop
$ endif
$ return
$!------------------------------------------------------------------------------
$!
$! Find current Zlib version number
$!
$FIND_VERSION:
$ open/read h_in 'v_file'
$hloop:
$ read/end=hdone h_in rec
$ rec = f$edit(rec,"TRIM")
$ if (f$extract(0,1,rec) .nes. "#") then goto hloop
$ rec = f$edit(rec - "#", "TRIM")
$ if f$element(0," ",rec) .nes. "define" then goto hloop
$ if f$element(1," ",rec) .eqs. v_string
$ then
$ version = 'f$element(2," ",rec)'
$ goto hdone
$ endif
$ goto hloop
$hdone:
$ close h_in
$ return
$!------------------------------------------------------------------------------
$!
$! Analyze Object files for OpenVMS AXP to extract Procedure and Data
$! information to build a symbol vector for a shareable image
$! All the "brains" of this logic was suggested by Hartmut Becker
$! (Hartmut.Becker@compaq.com). All the bugs were introduced by me
$! (zinser@decus.de), so if you do have problem reports please do not
$! bother Hartmut/HP, but get in touch with me
$!
$ ANAL_OBJ_AXP: Subroutine
$ V = 'F$Verify(0)
$ SAY := "WRITE_ SYS$OUTPUT"
$
$ IF F$SEARCH("''P1'") .EQS. ""
$ THEN
$ SAY "ANAL_OBJ_AXP-E-NOSUCHFILE: Error, inputfile ''p1' not available"
$ goto exit_aa
$ ENDIF
$ IF "''P2'" .EQS. ""
$ THEN
$ SAY "ANAL_OBJ_AXP: Error, no output file provided"
$ goto exit_aa
$ ENDIF
$
$ open/read in 'p1
$ create a.tmp
$ open/append atmp a.tmp
$ loop:
$ read/end=end_loop in line
$ f= f$search(line)
$ if f .eqs. ""
$ then
$ write sys$output "ANAL_OBJ_AXP-w-nosuchfile, ''line'"
$ goto loop
$ endif
$ define/user sys$output nl:
$ define/user sys$error nl:
$ anal/obj/gsd 'f /out=x.tmp
$ open/read xtmp x.tmp
$ XLOOP:
$ read/end=end_xloop xtmp xline
$ xline = f$edit(xline,"compress")
$ write atmp xline
$ goto xloop
$ END_XLOOP:
$ close xtmp
$ goto loop
$ end_loop:
$ close in
$ close atmp
$ if f$search("a.tmp") .eqs. "" -
then $ exit
$ ! all global definitions
$ search a.tmp "symbol:","EGSY$V_DEF 1","EGSY$V_NORM 1"/out=b.tmp
$ ! all procedures
$ search b.tmp "EGSY$V_NORM 1"/wind=(0,1) /out=c.tmp
$ search c.tmp "symbol:"/out=d.tmp
$ define/user sys$output nl:
$ edito/edt/command=sys$input d.tmp
sub/symbol: "/symbol_vector=(/whole
sub/"/=PROCEDURE)/whole
exit
$ ! all data
$ search b.tmp "EGSY$V_DEF 1"/wind=(0,1) /out=e.tmp
$ search e.tmp "symbol:"/out=f.tmp
$ define/user sys$output nl:
$ edito/edt/command=sys$input f.tmp
sub/symbol: "/symbol_vector=(/whole
sub/"/=DATA)/whole
exit
$ sort/nodupl d.tmp,f.tmp 'p2'
$ delete a.tmp;*,b.tmp;*,c.tmp;*,d.tmp;*,e.tmp;*,f.tmp;*
$ if f$search("x.tmp") .nes. "" -
then $ delete x.tmp;*
$!
$ EXIT_AA:
$ if V then set verify
$ endsubroutine
$!------------------------------------------------------------------------------
qnx/package.qpg
浏览文件 @ 9c3a5830
......@@ -25,10 +25,10 @@
<QPG:Files>
<QPG:Add file="../zconf.h" install="/opt/include/" user="root:sys" permission="644"/>
<QPG:Add file="../zlib.h" install="/opt/include/" user="root:sys" permission="644"/>
<QPG:Add file="../libz.so.1.2.2.3" install="/opt/lib/" user="root:bin" permission="644"/>
<QPG:Add file="libz.so" install="/opt/lib/" component="dev" filetype="symlink" linkto="libz.so.1.2.2.3"/>
<QPG:Add file="libz.so.1" install="/opt/lib/" filetype="symlink" linkto="libz.so.1.2.2.3"/>
<QPG:Add file="../libz.so.1.2.2.3" install="/opt/lib/" component="slib"/>
<QPG:Add file="../libz.so.1.2.2.4" install="/opt/lib/" user="root:bin" permission="644"/>
<QPG:Add file="libz.so" install="/opt/lib/" component="dev" filetype="symlink" linkto="libz.so.1.2.2.4"/>
<QPG:Add file="libz.so.1" install="/opt/lib/" filetype="symlink" linkto="libz.so.1.2.2.4"/>
<QPG:Add file="../libz.so.1.2.2.4" install="/opt/lib/" component="slib"/>
</QPG:Files>
<QPG:PackageFilter>
......@@ -63,7 +63,7 @@
</QPM:ProductDescription>
<QPM:ReleaseDescription>
<QPM:ReleaseVersion>1.2.2.3</QPM:ReleaseVersion>
<QPM:ReleaseVersion>1.2.2.4</QPM:ReleaseVersion>
<QPM:ReleaseUrgency>Medium</QPM:ReleaseUrgency>
<QPM:ReleaseStability>Stable</QPM:ReleaseStability>
<QPM:ReleaseNoteMinor></QPM:ReleaseNoteMinor>
......
trees.c
浏览文件 @ 9c3a5830
/* trees.c -- output deflated data using Huffman coding
* Copyright (C) 1995-2004 Jean-loup Gailly
* Copyright (C) 1995-2005 Jean-loup Gailly
* For conditions of distribution and use, see copyright notice in zlib.h
*/
......@@ -555,7 +555,7 @@ local void gen_bitlen(s, desc)
while (n != 0) {
m = s->heap[--h];
if (m > max_code) continue;
if (tree[m].Len != (unsigned) bits) {
if ((unsigned) tree[m].Len != (unsigned) bits) {
Trace((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits));
s->opt_len += ((long)bits - (long)tree[m].Len)
*(long)tree[m].Freq;
......
win32/zlib1.rc
浏览文件 @ 9c3a5830
......@@ -5,8 +5,8 @@ VS_VERSION_INFO VERSIONINFO
#else
VS_VERSION_INFO VERSIONINFO MOVEABLE IMPURE LOADONCALL DISCARDABLE
#endif
FILEVERSION 1,2,2,3
PRODUCTVERSION 1,2,2,3
FILEVERSION 1,2,2,4
PRODUCTVERSION 1,2,2,4
FILEFLAGSMASK VS_FFI_FILEFLAGSMASK
#ifdef _DEBUG
FILEFLAGS 1
......@@ -23,12 +23,12 @@ BEGIN
//language ID = U.S. English, char set = Windows, Multilingual
BEGIN
VALUE "FileDescription", "zlib data compression library\0"
VALUE "FileVersion", "1.2.2.3\0"
VALUE "FileVersion", "1.2.2.4\0"
VALUE "InternalName", "zlib1.dll\0"
VALUE "LegalCopyright", "(C) 1995-2004 Jean-loup Gailly & Mark Adler\0"
VALUE "OriginalFilename", "zlib1.dll\0"
VALUE "ProductName", "zlib\0"
VALUE "ProductVersion", "1.2.2.3\0"
VALUE "ProductVersion", "1.2.2.4\0"
VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0"
END
END
......
zlib.3
浏览文件 @ 9c3a5830
.TH ZLIB 3 "27 May 2005"
.TH ZLIB 3 "11 July 2005"
.SH NAME
zlib \- compression/decompression library
.SH SYNOPSIS
......@@ -133,8 +133,8 @@ before asking for help.
Send questions and/or comments to zlib@gzip.org,
or (for the Windows DLL version) to Gilles Vollant (info@winimage.com).
.SH AUTHORS
Version 1.2.2.3
Copyright (C) 1995-2004 Jean-loup Gailly (jloup@gzip.org)
Version 1.2.2.4
Copyright (C) 1995-2005 Jean-loup Gailly (jloup@gzip.org)
and Mark Adler (madler@alumni.caltech.edu).
.LP
This software is provided "as-is,"
......
zlib.h
浏览文件 @ 9c3a5830
/* zlib.h -- interface of the 'zlib' general purpose compression library
version 1.2.2.3, May 27th, 2005
version 1.2.2.4, July 11th, 2005
Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler
......@@ -37,8 +37,8 @@
extern "C" {
#endif
#define ZLIB_VERSION "1.2.2.3"
#define ZLIB_VERNUM 0x1223
#define ZLIB_VERSION "1.2.2.4"
#define ZLIB_VERNUM 0x1224
/*
The 'zlib' compression library provides in-memory compression and
......@@ -726,11 +726,11 @@ ZEXTERN int ZEXPORT inflateInit2 OF((z_streamp strm,
a crc32 instead of an adler32.
inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
memory, Z_STREAM_ERROR if a parameter is invalid (such as a negative
memLevel). msg is set to null if there is no error message. inflateInit2
does not perform any decompression apart from reading the zlib header if
present: this will be done by inflate(). (So next_in and avail_in may be
modified, but next_out and avail_out are unchanged.)
memory, Z_STREAM_ERROR if a parameter is invalid (such as a null strm). msg
is set to null if there is no error message. inflateInit2 does not perform
any decompression apart from reading the zlib header if present: this will
be done by inflate(). (So next_in and avail_in may be modified, but next_out
and avail_out are unchanged.)
*/
ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
......@@ -796,6 +796,22 @@ ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
stream state was inconsistent (such as zalloc or state being NULL).
*/
ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm,
int bits,
int value));
/*
This function inserts bits in the inflate input stream. The intent is
that this function is used to start inflating at a bit position in the
middle of a byte. The provided bits will be used before any bytes are used
from next_in. This function should only be used with raw inflate, and
should be used before the first inflate() call after inflateInit2() or
inflateReset(). bits must be less than or equal to 16, and that many of the
least significant bits of value will be inserted in the input.
inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
stream state was inconsistent.
*/
ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm,
gz_headerp head));
/*
......
zutil.c
浏览文件 @ 9c3a5830
/* zutil.c -- target dependent utility functions for the compression library
* Copyright (C) 1995-2004 Jean-loup Gailly.
* Copyright (C) 1995-2005 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
......@@ -74,38 +74,38 @@ uLong ZEXPORT zlibCompileFlags()
flags += 1 << 13;
#endif
#ifdef NO_GZCOMPRESS
flags += 1 << 16;
flags += 1L << 16;
#endif
#ifdef NO_GZIP
flags += 1 << 17;
flags += 1L << 17;
#endif
#ifdef PKZIP_BUG_WORKAROUND
flags += 1 << 20;
flags += 1L << 20;
#endif
#ifdef FASTEST
flags += 1 << 21;
flags += 1L << 21;
#endif
#ifdef STDC
# ifdef NO_vsnprintf
flags += 1 << 25;
flags += 1L << 25;
# ifdef HAS_vsprintf_void
flags += 1 << 26;
flags += 1L << 26;
# endif
# else
# ifdef HAS_vsnprintf_void
flags += 1 << 26;
flags += 1L << 26;
# endif
# endif
#else
flags += 1 << 24;
flags += 1L << 24;
# ifdef NO_snprintf
flags += 1 << 25;
flags += 1L << 25;
# ifdef HAS_sprintf_void
flags += 1 << 26;
flags += 1L << 26;
# endif
# else
# ifdef HAS_snprintf_void
flags += 1 << 26;
flags += 1L << 26;
# endif
# endif
#endif
......
zutil.h
浏览文件 @ 9c3a5830
......@@ -117,6 +117,9 @@ extern const char * const z_errmsg[10]; /* indexed by 2-zlib_error */
#ifdef OS2
# define OS_CODE 0x06
# ifdef M_I86
#include <malloc.h>
# endif
#endif
#if defined(MACOS) || defined(TARGET_OS_MAC)
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或