Skip to content

T
Third Party Zlib

OpenHarmony / Third Party Zlib
1 年多 前同步成功

通知 16
Star 112
Fork 2
T
Third Party Zlib
提交 6b8233bf 编写于 作者: M Mark Adler
浏览文件
操作

zlib 1.2.2.3

上级 0484693e
展开全部 隐藏空白更改
内联 并排
Showing with 11616 addition and 8906 deletion
ChangeLog
浏览文件 @ 6b8233bf
ChangeLog file for zlib
Changes in 1.2.2.3 (27 May 2005)
- Replace 1U constants in inflate.c and inftrees.c for 64-bit compile
- Typecast fread() return values in gzio.c [Vollant]
- Remove trailing space in minigzip.c outmode (VC++ can't deal with it)
- Fix crc check bug in gzread() after gzungetc() [Heiner]
- Add the deflateTune() function to adjust internal compression parameters
- Add a fast gzip decompressor, gun.c, to examples (use of inflateBack)
- Remove an incorrect assertion in examples/zpipe.c
- Add C++ wrapper in infback9.h [Donais]
- Fix bug in inflateCopy() when decoding fixed codes
- Note in zlib.h how much deflateSetDictionary() actually uses
- Remove USE_DICT_HEAD in deflate.c (would mess up inflate if used)
- Add _WIN32_WCE to define WIN32 in zconf.in.h [Spencer]
- Don't include stderr.h or errno.h for _WIN32_WCE in zutil.h [Spencer]
- Add gzdirect() function to indicate transparent reads
- Update contrib/minizip [Vollant]
- Fix compilation of deflate.c when both ASMV and FASTEST [Oberhumer]
- Add casts in crc32.c to avoid warnings [Oberhumer]
- Add contrib/masmx64 [Vollant]
- Update contrib/asm586, asm686, masmx86, testzlib, vstudio [Vollant]
Changes in 1.2.2.2 (30 December 2004)
- Replace structure assignments in deflate.c and inflate.c with zmemcpy to
avoid implicit memcpy calls (portability for no-library compilation)
......
Makefile
浏览文件 @ 6b8233bf
......@@ -30,7 +30,7 @@ CPP=$(CC) -E
LIBS=libz.a
SHAREDLIB=libz.so
SHAREDLIBV=libz.so.1.2.2.2
SHAREDLIBV=libz.so.1.2.2.3
SHAREDLIBM=libz.so.1
AR=ar rc
......
Makefile.in
浏览文件 @ 6b8233bf
......@@ -30,7 +30,7 @@ CPP=$(CC) -E
LIBS=libz.a
SHAREDLIB=libz.so
SHAREDLIBV=libz.so.1.2.2.2
SHAREDLIBV=libz.so.1.2.2.3
SHAREDLIBM=libz.so.1
AR=ar rc
......
README
浏览文件 @ 6b8233bf
ZLIB DATA COMPRESSION LIBRARY
zlib 1.2.2.2 is a general purpose data compression library. All the code is
zlib 1.2.2.3 is a general purpose data compression library. All the code is
thread safe. The data format used by the zlib library is described by RFCs
(Request for Comments) 1950 to 1952 in the files
http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format)
......@@ -33,7 +33,7 @@ Mark Nelson <markn@ieee.org> wrote an article about zlib for the Jan. 1997
issue of Dr. Dobb's Journal; a copy of the article is available in
http://dogma.net/markn/articles/zlibtool/zlibtool.htm
The changes made in version 1.2.2.2 are documented in the file ChangeLog.
The changes made in version 1.2.2.3 are documented in the file ChangeLog.
Unsupported third party contributions are provided in directory "contrib".
......
as400/zlib.inc
浏览文件 @ 6b8233bf
* ZLIB.INC - Interface to the general purpose compression library
*
* ILE RPG400 version by Patrick Monnerat, DATASPHERE.
* Version 1.2.2.2
* Version 1.2.2.3
*
*
* WARNING:
......@@ -20,8 +20,12 @@
* Constants
**************************************************************************
*
D ZLIB_VERSION C '1.2.2.2' Header's version
D ZLIB_VERNUM C X'1222'
* Versioning information.
*
D ZLIB_VERSION C '1.2.2.3'
D ZLIB_VERNUM C X'1223'
*
* Other equates.
*
D Z_NO_FLUSH C 0
D Z_SYNC_FLUSH C 2
......
contrib/README.contrib
浏览文件 @ 6b8233bf
......@@ -42,6 +42,10 @@ masm686/ by Dan Higdon <hdan@kinesoft.com>
and Chuck Walbourn <chuckw@kinesoft.com>
asm code for Pentium Pro/PII, using the MASM syntax
masmx64/ by Gilles Vollant <info@winimage.com>
x86 64-bit (AMD64 and Intel EM64t) code for x64 assembler to
replace longest_match() and inflate_fast()
masmx86/ by Gilles Vollant <info@winimage.com>
x86 asm code to replace longest_match() and inflate_fast(),
for Visual C++ and MASM
......
contrib/asm586/match.S
浏览文件 @ 6b8233bf
此差异已折叠。
contrib/asm686/match.S
浏览文件 @ 6b8233bf
/* match.s -- Pentium-Pro-optimized version of longest_match()
* Written for zlib 1.1.2
* Copyright (C) 1998 Brian Raiter <breadbox@muppetlabs.com>
*
* This is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License.
*/
#ifndef NO_UNDERLINE
#define match_init _match_init
#define longest_match _longest_match
#endif
#define MAX_MATCH (258)
#define MIN_MATCH (3)
#define MIN_LOOKAHEAD (MAX_MATCH + MIN_MATCH + 1)
#define MAX_MATCH_8 ((MAX_MATCH + 7) & ~7)
/* stack frame offsets */
#define chainlenwmask 0 /* high word: current chain len */
/* low word: s->wmask */
#define window 4 /* local copy of s->window */
#define windowbestlen 8 /* s->window + bestlen */
#define scanstart 16 /* first two bytes of string */
#define scanend 12 /* last two bytes of string */
#define scanalign 20 /* dword-misalignment of string */
#define nicematch 24 /* a good enough match size */
#define bestlen 28 /* size of best match so far */
#define scan 32 /* ptr to string wanting match */
#define LocalVarsSize (36)
/* saved ebx 36 */
/* saved edi 40 */
/* saved esi 44 */
/* saved ebp 48 */
/* return address 52 */
#define deflatestate 56 /* the function arguments */
#define curmatch 60
/* Offsets for fields in the deflate_state structure. These numbers
* are calculated from the definition of deflate_state, with the
* assumption that the compiler will dword-align the fields. (Thus,
* changing the definition of deflate_state could easily cause this
* program to crash horribly, without so much as a warning at
* compile time. Sigh.)
*/
#define dsWSize 36
#define dsWMask 44
#define dsWindow 48
#define dsPrev 56
#define dsMatchLen 88
#define dsPrevMatch 92
#define dsStrStart 100
#define dsMatchStart 104
#define dsLookahead 108
#define dsPrevLen 112
#define dsMaxChainLen 116
#define dsGoodMatch 132
#define dsNiceMatch 136
.file "match.S"
.globl match_init, longest_match
.text
/* uInt longest_match(deflate_state *deflatestate, IPos curmatch) */
longest_match:
/* Save registers that the compiler may be using, and adjust %esp to */
/* make room for our stack frame. */
pushl %ebp
pushl %edi
pushl %esi
pushl %ebx
subl $LocalVarsSize, %esp
/* Retrieve the function arguments. %ecx will hold cur_match */
/* throughout the entire function. %edx will hold the pointer to the */
/* deflate_state structure during the function's setup (before */
/* entering the main loop). */
movl deflatestate(%esp), %edx
movl curmatch(%esp), %ecx
/* uInt wmask = s->w_mask; */
/* unsigned chain_length = s->max_chain_length; */
/* if (s->prev_length >= s->good_match) { */
/* chain_length >>= 2; */
/* } */
movl dsPrevLen(%edx), %eax
movl dsGoodMatch(%edx), %ebx
cmpl %ebx, %eax
movl dsWMask(%edx), %eax
movl dsMaxChainLen(%edx), %ebx
jl LastMatchGood
shrl $2, %ebx
LastMatchGood:
/* chainlen is decremented once beforehand so that the function can */
/* use the sign flag instead of the zero flag for the exit test. */
/* It is then shifted into the high word, to make room for the wmask */
/* value, which it will always accompany. */
decl %ebx
shll $16, %ebx
orl %eax, %ebx
movl %ebx, chainlenwmask(%esp)
/* if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead; */
movl dsNiceMatch(%edx), %eax
movl dsLookahead(%edx), %ebx
cmpl %eax, %ebx
jl LookaheadLess
movl %eax, %ebx
LookaheadLess: movl %ebx, nicematch(%esp)
/* register Bytef *scan = s->window + s->strstart; */
movl dsWindow(%edx), %esi
movl %esi, window(%esp)
movl dsStrStart(%edx), %ebp
lea (%esi,%ebp), %edi
movl %edi, scan(%esp)
/* Determine how many bytes the scan ptr is off from being */
/* dword-aligned. */
movl %edi, %eax
negl %eax
andl $3, %eax
movl %eax, scanalign(%esp)
/* IPos limit = s->strstart > (IPos)MAX_DIST(s) ? */
/* s->strstart - (IPos)MAX_DIST(s) : NIL; */
movl dsWSize(%edx), %eax
subl $MIN_LOOKAHEAD, %eax
subl %eax, %ebp
jg LimitPositive
xorl %ebp, %ebp
LimitPositive:
/* int best_len = s->prev_length; */
movl dsPrevLen(%edx), %eax
movl %eax, bestlen(%esp)
/* Store the sum of s->window + best_len in %esi locally, and in %esi. */
addl %eax, %esi
movl %esi, windowbestlen(%esp)
/* register ush scan_start = *(ushf*)scan; */
/* register ush scan_end = *(ushf*)(scan+best_len-1); */
/* Posf *prev = s->prev; */
movzwl (%edi), %ebx
movl %ebx, scanstart(%esp)
movzwl -1(%edi,%eax), %ebx
movl %ebx, scanend(%esp)
movl dsPrev(%edx), %edi
/* Jump into the main loop. */
movl chainlenwmask(%esp), %edx
jmp LoopEntry
.balign 16
/* do {
* match = s->window + cur_match;
* if (*(ushf*)(match+best_len-1) != scan_end ||
* *(ushf*)match != scan_start) continue;
* [...]
* } while ((cur_match = prev[cur_match & wmask]) > limit
* && --chain_length != 0);
*
* Here is the inner loop of the function. The function will spend the
* majority of its time in this loop, and majority of that time will
* be spent in the first ten instructions.
*
* Within this loop:
* %ebx = scanend
* %ecx = curmatch
* %edx = chainlenwmask - i.e., ((chainlen << 16) | wmask)
* %esi = windowbestlen - i.e., (window + bestlen)
* %edi = prev
* %ebp = limit
*/
LookupLoop:
andl %edx, %ecx
movzwl (%edi,%ecx,2), %ecx
cmpl %ebp, %ecx
jbe LeaveNow
subl $0x00010000, %edx
js LeaveNow
LoopEntry: movzwl -1(%esi,%ecx), %eax
cmpl %ebx, %eax
jnz LookupLoop
movl window(%esp), %eax
movzwl (%eax,%ecx), %eax
cmpl scanstart(%esp), %eax
jnz LookupLoop
/* Store the current value of chainlen. */
movl %edx, chainlenwmask(%esp)
/* Point %edi to the string under scrutiny, and %esi to the string we */
/* are hoping to match it up with. In actuality, %esi and %edi are */
/* both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and %edx is */
/* initialized to -(MAX_MATCH_8 - scanalign). */
movl window(%esp), %esi
movl scan(%esp), %edi
addl %ecx, %esi
movl scanalign(%esp), %eax
movl $(-MAX_MATCH_8), %edx
lea MAX_MATCH_8(%edi,%eax), %edi
lea MAX_MATCH_8(%esi,%eax), %esi
/* Test the strings for equality, 8 bytes at a time. At the end,
* adjust %edx so that it is offset to the exact byte that mismatched.
*
* We already know at this point that the first three bytes of the
* strings match each other, and they can be safely passed over before
* starting the compare loop. So what this code does is skip over 0-3
* bytes, as much as necessary in order to dword-align the %edi
* pointer. (%esi will still be misaligned three times out of four.)
*
* It should be confessed that this loop usually does not represent
* much of the total running time. Replacing it with a more
* straightforward "rep cmpsb" would not drastically degrade
* performance.
*/
LoopCmps:
movl (%esi,%edx), %eax
xorl (%edi,%edx), %eax
jnz LeaveLoopCmps
movl 4(%esi,%edx), %eax
xorl 4(%edi,%edx), %eax
jnz LeaveLoopCmps4
addl $8, %edx
jnz LoopCmps
jmp LenMaximum
LeaveLoopCmps4: addl $4, %edx
LeaveLoopCmps: testl $0x0000FFFF, %eax
jnz LenLower
addl $2, %edx
shrl $16, %eax
LenLower: subb $1, %al
adcl $0, %edx
/* Calculate the length of the match. If it is longer than MAX_MATCH, */
/* then automatically accept it as the best possible match and leave. */
lea (%edi,%edx), %eax
movl scan(%esp), %edi
subl %edi, %eax
cmpl $MAX_MATCH, %eax
jge LenMaximum
/* If the length of the match is not longer than the best match we */
/* have so far, then forget it and return to the lookup loop. */
movl deflatestate(%esp), %edx
movl bestlen(%esp), %ebx
cmpl %ebx, %eax
jg LongerMatch
movl windowbestlen(%esp), %esi
movl dsPrev(%edx), %edi
movl scanend(%esp), %ebx
movl chainlenwmask(%esp), %edx
jmp LookupLoop
/* s->match_start = cur_match; */
/* best_len = len; */
/* if (len >= nice_match) break; */
/* scan_end = *(ushf*)(scan+best_len-1); */
LongerMatch: movl nicematch(%esp), %ebx
movl %eax, bestlen(%esp)
movl %ecx, dsMatchStart(%edx)
cmpl %ebx, %eax
jge LeaveNow
movl window(%esp), %esi
addl %eax, %esi
movl %esi, windowbestlen(%esp)
movzwl -1(%edi,%eax), %ebx
movl dsPrev(%edx), %edi
movl %ebx, scanend(%esp)
movl chainlenwmask(%esp), %edx
jmp LookupLoop
/* Accept the current string, with the maximum possible length. */
LenMaximum: movl deflatestate(%esp), %edx
movl $MAX_MATCH, bestlen(%esp)
movl %ecx, dsMatchStart(%edx)
/* if ((uInt)best_len <= s->lookahead) return (uInt)best_len; */
/* return s->lookahead; */
LeaveNow:
movl deflatestate(%esp), %edx
movl bestlen(%esp), %ebx
movl dsLookahead(%edx), %eax
cmpl %eax, %ebx
jg LookaheadRet
movl %ebx, %eax
LookaheadRet:
/* Restore the stack and return from whence we came. */
addl $LocalVarsSize, %esp
popl %ebx
popl %esi
popl %edi
popl %ebp
match_init: ret
/* match.s -- Pentium-Pro-optimized version of longest_match()
* Written for zlib 1.1.2
* Copyright (C) 1998 Brian Raiter <breadbox@muppetlabs.com>
*
* This is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License.
*/
#ifndef NO_UNDERLINE
#define match_init _match_init
#define longest_match _longest_match
#endif
#define MAX_MATCH (258)
#define MIN_MATCH (3)
#define MIN_LOOKAHEAD (MAX_MATCH + MIN_MATCH + 1)
#define MAX_MATCH_8 ((MAX_MATCH + 7) & ~7)
/* stack frame offsets */
#define chainlenwmask 0 /* high word: current chain len */
/* low word: s->wmask */
#define window 4 /* local copy of s->window */
#define windowbestlen 8 /* s->window + bestlen */
#define scanstart 16 /* first two bytes of string */
#define scanend 12 /* last two bytes of string */
#define scanalign 20 /* dword-misalignment of string */
#define nicematch 24 /* a good enough match size */
#define bestlen 28 /* size of best match so far */
#define scan 32 /* ptr to string wanting match */
#define LocalVarsSize (36)
/* saved ebx 36 */
/* saved edi 40 */
/* saved esi 44 */
/* saved ebp 48 */
/* return address 52 */
#define deflatestate 56 /* the function arguments */
#define curmatch 60
/* All the +zlib1222add offsets are due to the addition of fields
* in zlib in the deflate_state structure since the asm code was first written
* (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
* (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
* if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
*/
#define zlib1222add (8)
#define dsWSize (36+zlib1222add)
#define dsWMask (44+zlib1222add)
#define dsWindow (48+zlib1222add)
#define dsPrev (56+zlib1222add)
#define dsMatchLen (88+zlib1222add)
#define dsPrevMatch (92+zlib1222add)
#define dsStrStart (100+zlib1222add)
#define dsMatchStart (104+zlib1222add)
#define dsLookahead (108+zlib1222add)
#define dsPrevLen (112+zlib1222add)
#define dsMaxChainLen (116+zlib1222add)
#define dsGoodMatch (132+zlib1222add)
#define dsNiceMatch (136+zlib1222add)
.file "match.S"
.globl match_init, longest_match
.text
/* uInt longest_match(deflate_state *deflatestate, IPos curmatch) */
longest_match:
/* Save registers that the compiler may be using, and adjust %esp to */
/* make room for our stack frame. */
pushl %ebp
pushl %edi
pushl %esi
pushl %ebx
subl $LocalVarsSize, %esp
/* Retrieve the function arguments. %ecx will hold cur_match */
/* throughout the entire function. %edx will hold the pointer to the */
/* deflate_state structure during the function's setup (before */
/* entering the main loop). */
movl deflatestate(%esp), %edx
movl curmatch(%esp), %ecx
/* uInt wmask = s->w_mask; */
/* unsigned chain_length = s->max_chain_length; */
/* if (s->prev_length >= s->good_match) { */
/* chain_length >>= 2; */
/* } */
movl dsPrevLen(%edx), %eax
movl dsGoodMatch(%edx), %ebx
cmpl %ebx, %eax
movl dsWMask(%edx), %eax
movl dsMaxChainLen(%edx), %ebx
jl LastMatchGood
shrl $2, %ebx
LastMatchGood:
/* chainlen is decremented once beforehand so that the function can */
/* use the sign flag instead of the zero flag for the exit test. */
/* It is then shifted into the high word, to make room for the wmask */
/* value, which it will always accompany. */
decl %ebx
shll $16, %ebx
orl %eax, %ebx
movl %ebx, chainlenwmask(%esp)
/* if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead; */
movl dsNiceMatch(%edx), %eax
movl dsLookahead(%edx), %ebx
cmpl %eax, %ebx
jl LookaheadLess
movl %eax, %ebx
LookaheadLess: movl %ebx, nicematch(%esp)
/* register Bytef *scan = s->window + s->strstart; */
movl dsWindow(%edx), %esi
movl %esi, window(%esp)
movl dsStrStart(%edx), %ebp
lea (%esi,%ebp), %edi
movl %edi, scan(%esp)
/* Determine how many bytes the scan ptr is off from being */
/* dword-aligned. */
movl %edi, %eax
negl %eax
andl $3, %eax
movl %eax, scanalign(%esp)
/* IPos limit = s->strstart > (IPos)MAX_DIST(s) ? */
/* s->strstart - (IPos)MAX_DIST(s) : NIL; */
movl dsWSize(%edx), %eax
subl $MIN_LOOKAHEAD, %eax
subl %eax, %ebp
jg LimitPositive
xorl %ebp, %ebp
LimitPositive:
/* int best_len = s->prev_length; */
movl dsPrevLen(%edx), %eax
movl %eax, bestlen(%esp)
/* Store the sum of s->window + best_len in %esi locally, and in %esi. */
addl %eax, %esi
movl %esi, windowbestlen(%esp)
/* register ush scan_start = *(ushf*)scan; */
/* register ush scan_end = *(ushf*)(scan+best_len-1); */
/* Posf *prev = s->prev; */
movzwl (%edi), %ebx
movl %ebx, scanstart(%esp)
movzwl -1(%edi,%eax), %ebx
movl %ebx, scanend(%esp)
movl dsPrev(%edx), %edi
/* Jump into the main loop. */
movl chainlenwmask(%esp), %edx
jmp LoopEntry
.balign 16
/* do {
* match = s->window + cur_match;
* if (*(ushf*)(match+best_len-1) != scan_end ||
* *(ushf*)match != scan_start) continue;
* [...]
* } while ((cur_match = prev[cur_match & wmask]) > limit
* && --chain_length != 0);
*
* Here is the inner loop of the function. The function will spend the
* majority of its time in this loop, and majority of that time will
* be spent in the first ten instructions.
*
* Within this loop:
* %ebx = scanend
* %ecx = curmatch
* %edx = chainlenwmask - i.e., ((chainlen << 16) | wmask)
* %esi = windowbestlen - i.e., (window + bestlen)
* %edi = prev
* %ebp = limit
*/
LookupLoop:
andl %edx, %ecx
movzwl (%edi,%ecx,2), %ecx
cmpl %ebp, %ecx
jbe LeaveNow
subl $0x00010000, %edx
js LeaveNow
LoopEntry: movzwl -1(%esi,%ecx), %eax
cmpl %ebx, %eax
jnz LookupLoop
movl window(%esp), %eax
movzwl (%eax,%ecx), %eax
cmpl scanstart(%esp), %eax
jnz LookupLoop
/* Store the current value of chainlen. */
movl %edx, chainlenwmask(%esp)
/* Point %edi to the string under scrutiny, and %esi to the string we */
/* are hoping to match it up with. In actuality, %esi and %edi are */
/* both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and %edx is */
/* initialized to -(MAX_MATCH_8 - scanalign). */
movl window(%esp), %esi
movl scan(%esp), %edi
addl %ecx, %esi
movl scanalign(%esp), %eax
movl $(-MAX_MATCH_8), %edx
lea MAX_MATCH_8(%edi,%eax), %edi
lea MAX_MATCH_8(%esi,%eax), %esi
/* Test the strings for equality, 8 bytes at a time. At the end,
* adjust %edx so that it is offset to the exact byte that mismatched.
*
* We already know at this point that the first three bytes of the
* strings match each other, and they can be safely passed over before
* starting the compare loop. So what this code does is skip over 0-3
* bytes, as much as necessary in order to dword-align the %edi
* pointer. (%esi will still be misaligned three times out of four.)
*
* It should be confessed that this loop usually does not represent
* much of the total running time. Replacing it with a more
* straightforward "rep cmpsb" would not drastically degrade
* performance.
*/
LoopCmps:
movl (%esi,%edx), %eax
xorl (%edi,%edx), %eax
jnz LeaveLoopCmps
movl 4(%esi,%edx), %eax
xorl 4(%edi,%edx), %eax
jnz LeaveLoopCmps4
addl $8, %edx
jnz LoopCmps
jmp LenMaximum
LeaveLoopCmps4: addl $4, %edx
LeaveLoopCmps: testl $0x0000FFFF, %eax
jnz LenLower
addl $2, %edx
shrl $16, %eax
LenLower: subb $1, %al
adcl $0, %edx
/* Calculate the length of the match. If it is longer than MAX_MATCH, */
/* then automatically accept it as the best possible match and leave. */
lea (%edi,%edx), %eax
movl scan(%esp), %edi
subl %edi, %eax
cmpl $MAX_MATCH, %eax
jge LenMaximum
/* If the length of the match is not longer than the best match we */
/* have so far, then forget it and return to the lookup loop. */
movl deflatestate(%esp), %edx
movl bestlen(%esp), %ebx
cmpl %ebx, %eax
jg LongerMatch
movl windowbestlen(%esp), %esi
movl dsPrev(%edx), %edi
movl scanend(%esp), %ebx
movl chainlenwmask(%esp), %edx
jmp LookupLoop
/* s->match_start = cur_match; */
/* best_len = len; */
/* if (len >= nice_match) break; */
/* scan_end = *(ushf*)(scan+best_len-1); */
LongerMatch: movl nicematch(%esp), %ebx
movl %eax, bestlen(%esp)
movl %ecx, dsMatchStart(%edx)
cmpl %ebx, %eax
jge LeaveNow
movl window(%esp), %esi
addl %eax, %esi
movl %esi, windowbestlen(%esp)
movzwl -1(%edi,%eax), %ebx
movl dsPrev(%edx), %edi
movl %ebx, scanend(%esp)
movl chainlenwmask(%esp), %edx
jmp LookupLoop
/* Accept the current string, with the maximum possible length. */
LenMaximum: movl deflatestate(%esp), %edx
movl $MAX_MATCH, bestlen(%esp)
movl %ecx, dsMatchStart(%edx)
/* if ((uInt)best_len <= s->lookahead) return (uInt)best_len; */
/* return s->lookahead; */
LeaveNow:
movl deflatestate(%esp), %edx
movl bestlen(%esp), %ebx
movl dsLookahead(%edx), %eax
cmpl %eax, %ebx
jg LookaheadRet
movl %ebx, %eax
LookaheadRet:
/* Restore the stack and return from whence we came. */
addl $LocalVarsSize, %esp
popl %ebx
popl %esi
popl %edi
popl %ebp
match_init: ret
contrib/infback9/infback9.h
浏览文件 @ 6b8233bf
......@@ -16,6 +16,10 @@
* zlib.h must be included before this header file.
*/
#ifdef __cplusplus
extern "C" {
#endif
ZEXTERN int ZEXPORT inflateBack9 OF((z_stream FAR *strm,
in_func in, void FAR *in_desc,
out_func out, void FAR *out_desc));
......@@ -27,3 +31,7 @@ ZEXTERN int ZEXPORT inflateBack9Init_ OF((z_stream FAR *strm,
#define inflateBack9Init(strm, window) \
inflateBack9Init_((strm), (window), \
ZLIB_VERSION, sizeof(z_stream))
#ifdef __cplusplus
}
#endif
contrib/infback9/inftree9.c
浏览文件 @ 6b8233bf
/* inftree9.c -- generate Huffman trees for efficient decoding
* Copyright (C) 1995-2003 Mark Adler
* Copyright (C) 1995-2005 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
......@@ -9,7 +9,7 @@
#define MAXBITS 15
const char inflate9_copyright[] =
" inflate9 1.2.2.2 Copyright 1995-2004 Mark Adler ";
" inflate9 1.2.2.3 Copyright 1995-2005 Mark Adler ";
/*
If you use the zlib library in a product, an acknowledgment is welcome
in the documentation of your product. If for some reason you cannot
......@@ -64,7 +64,7 @@ unsigned short FAR *work;
static const unsigned short lext[31] = { /* Length codes 257..285 extra */
128, 128, 128, 128, 128, 128, 128, 128, 129, 129, 129, 129,
130, 130, 130, 130, 131, 131, 131, 131, 132, 132, 132, 132,
133, 133, 133, 133, 144, 72, 199};
133, 133, 133, 133, 144, 66, 71};
static const unsigned short dbase[32] = { /* Distance codes 0..31 base */
1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49,
65, 97, 129, 193, 257, 385, 513, 769, 1025, 1537, 2049, 3073,
......
contrib/masm686/match.asm
浏览文件 @ 6b8233bf
此差异已折叠。
contrib/masmx64/bld_ml64.bat 0 → 100644
浏览文件 @ 6b8233bf
ml64.exe /Flinffasx64 /c /Zi inffasx64.asm
ml64.exe /Flgvmat64 /c /Zi gvmat64.asm
contrib/masmx64/gvmat64.asm 0 → 100644
浏览文件 @ 6b8233bf
;uInt longest_match_x64(
; deflate_state *s,
; IPos cur_match); /* current match */
; gvmat64.asm -- Asm portion of the optimized longest_match for 32 bits x86
; Copyright (C) 1995-2005 Jean-loup Gailly, Brian Raiter and Gilles Vollant.
; File written by Gilles Vollant, by modifiying the longest_match
; from Jean-loup Gailly in deflate.c
; and modifying asm686 with masm, optimised assembly code from Brian Raiter,
; written 1998
; http://www.zlib.net
; http://www.winimage.com/zLibDll
; http://www.muppetlabs.com/~breadbox/software/assembly.html
;
; to compile this file, I use option
; ml64.exe /Flgvmat64 /c /Zi gvmat64.asm
; with Microsoft Macro Assembler (x64) for AMD64
;
; ml64.exe is given with Visual Studio 2005, Windows 2003 server DDK
;
; (you can get Windows 2003 server DDK with ml64 and cl for AMD64 from
; http://www.microsoft.com/whdc/devtools/ddk/default.mspx for low price)
;
; Be carrefull to adapt zlib1222add below to your version of zLib
;uInt longest_match(s, cur_match)
; deflate_state *s;
; IPos cur_match; /* current match */
.code
longest_match PROC
;LocalVarsSize equ 88
LocalVarsSize equ 72
; register used : rax,rbx,rcx,rdx,rsi,rdi,r8,r9,r10,r11,r12
; free register : r14,r15
; register can be saved : rsp
chainlenwmask equ rsp + 8 - LocalVarsSize ; high word: current chain len
; low word: s->wmask
;window equ rsp + xx - LocalVarsSize ; local copy of s->window ; stored in r10
;windowbestlen equ rsp + xx - LocalVarsSize ; s->window + bestlen , use r10+r11
;scanstart equ rsp + xx - LocalVarsSize ; first two bytes of string ; stored in r12w
;scanend equ rsp + xx - LocalVarsSize ; last two bytes of string use ebx
;scanalign equ rsp + xx - LocalVarsSize ; dword-misalignment of string r13
;bestlen equ rsp + xx - LocalVarsSize ; size of best match so far -> r11d
;scan equ rsp + xx - LocalVarsSize ; ptr to string wanting match -> r9
nicematch equ rsp + 16 - LocalVarsSize ; a good enough match size -> r14
save_rdi equ rsp + 24 - LocalVarsSize
save_rsi equ rsp + 32 - LocalVarsSize
save_rbx equ rsp + 40 - LocalVarsSize
save_rbp equ rsp + 48 - LocalVarsSize
save_r12 equ rsp + 56 - LocalVarsSize
save_r13 equ rsp + 64 - LocalVarsSize
;save_r14 equ rsp + 72 - LocalVarsSize
;save_r15 equ rsp + 80 - LocalVarsSize
; all the +4 offsets are due to the addition of pending_buf_size (in zlib
; in the deflate_state structure since the asm code was first written
; (if you compile with zlib 1.0.4 or older, remove the +4).
; Note : these value are good with a 8 bytes boundary pack structure
MAX_MATCH equ 258
MIN_MATCH equ 3
MIN_LOOKAHEAD equ (MAX_MATCH+MIN_MATCH+1)
;;; Offsets for fields in the deflate_state structure. These numbers
;;; are calculated from the definition of deflate_state, with the
;;; assumption that the compiler will dword-align the fields. (Thus,
;;; changing the definition of deflate_state could easily cause this
;;; program to crash horribly, without so much as a warning at
;;; compile time. Sigh.)
; all the +zlib1222add offsets are due to the addition of fields
; in zlib in the deflate_state structure since the asm code was first written
; (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
; (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
; if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
zlib1222add equ 8
dsWSize equ 56+zlib1222add+(zlib1222add/2)
dsWMask equ 64+zlib1222add+(zlib1222add/2)
dsWindow equ 72+zlib1222add
dsPrev equ 88+zlib1222add
dsMatchLen equ 128+zlib1222add
dsPrevMatch equ 132+zlib1222add
dsStrStart equ 140+zlib1222add
dsMatchStart equ 144+zlib1222add
dsLookahead equ 148+zlib1222add
dsPrevLen equ 152+zlib1222add
dsMaxChainLen equ 156+zlib1222add
dsGoodMatch equ 172+zlib1222add
dsNiceMatch equ 176+zlib1222add
; parameter 1 in r8(deflate state s), param 2 in rdx (cur match)
; see http://weblogs.asp.net/oldnewthing/archive/2004/01/14/58579.aspx and
; http://msdn.microsoft.com/library/en-us/kmarch/hh/kmarch/64bitAMD_8e951dd2-ee77-4728-8702-55ce4b5dd24a.xml.asp
;
; All registers must be preserved across the call, except for
; rax, rcx, rdx, r8, r-9, r10, and r11, which are scratch.
;;; Save registers that the compiler may be using, and adjust esp to
;;; make room for our stack frame.
;;; Retrieve the function arguments. r8d will hold cur_match
;;; throughout the entire function. edx will hold the pointer to the
;;; deflate_state structure during the function's setup (before
;;; entering the main loop.
; parameter 1 in rcx (deflate_state* s), param 2 in edx -> r8 (cur match)
; this clear high 32 bits of r8, which can be garbage in both r8 and rdx
mov [save_rdi],rdi
mov [save_rsi],rsi
mov [save_rbx],rbx
mov [save_rbp],rbp
mov r8d,edx
mov [save_r12],r12
mov [save_r13],r13
; mov [save_r14],r14
; mov [save_r15],r15
;;; uInt wmask = s->w_mask;
;;; unsigned chain_length = s->max_chain_length;
;;; if (s->prev_length >= s->good_match) {
;;; chain_length >>= 2;
;;; }
mov edi, [rcx + dsPrevLen]
mov esi, [rcx + dsGoodMatch]
mov eax, [rcx + dsWMask]
mov ebx, [rcx + dsMaxChainLen]
cmp edi, esi
jl LastMatchGood
shr ebx, 2
LastMatchGood:
;;; chainlen is decremented once beforehand so that the function can
;;; use the sign flag instead of the zero flag for the exit test.
;;; It is then shifted into the high word, to make room for the wmask
;;; value, which it will always accompany.
dec ebx
shl ebx, 16
or ebx, eax
mov [chainlenwmask], ebx
;;; if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
mov eax, [rcx + dsNiceMatch]
mov r10d, [rcx + dsLookahead]
cmp r10d, eax
cmovnl r10d, eax
mov [nicematch],r10d
LookaheadLess:
;;; register Bytef *scan = s->window + s->strstart;
mov r10, [rcx + dsWindow]
mov ebp, [rcx + dsStrStart]
lea r13, [r10 + rbp]
;;; Determine how many bytes the scan ptr is off from being
;;; dword-aligned.
mov r9,r13
neg r13
and r13,3
;;; IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
;;; s->strstart - (IPos)MAX_DIST(s) : NIL;
mov eax, [rcx + dsWSize]
sub eax, MIN_LOOKAHEAD
xor edi,edi
sub ebp, eax
mov r11d, [rcx + dsPrevLen]
cmovng ebp,edi
;;; int best_len = s->prev_length;
;;; Store the sum of s->window + best_len in esi locally, and in esi.
lea rsi,[r10+r11]
;;; register ush scan_start = *(ushf*)scan;
;;; register ush scan_end = *(ushf*)(scan+best_len-1);
;;; Posf *prev = s->prev;
movzx r12d,word ptr [r9]
movzx ebx, word ptr [r9 + r11 - 1]
mov rdi, [rcx + dsPrev]
;;; Jump into the main loop.
mov edx, [chainlenwmask]
cmp bx,word ptr [rsi + r8 - 1]
jz LookupLoopIsZero
LookupLoop1:
and r8d, edx
movzx r8d, word ptr [rdi + r8*2]
cmp r8d, ebp
jbe LeaveNow
sub edx, 00010000h
js LeaveNow
LoopEntry1:
cmp bx,word ptr [rsi + r8 - 1]
jz LookupLoopIsZero
LookupLoop2:
and r8d, edx
movzx r8d, word ptr [rdi + r8*2]
cmp r8d, ebp
jbe LeaveNow
sub edx, 00010000h
js LeaveNow
LoopEntry2:
cmp bx,word ptr [rsi + r8 - 1]
jz LookupLoopIsZero
LookupLoop4:
and r8d, edx
movzx r8d, word ptr [rdi + r8*2]
cmp r8d, ebp
jbe LeaveNow
sub edx, 00010000h
js LeaveNow
LoopEntry4:
cmp bx,word ptr [rsi + r8 - 1]
jnz LookupLoop1
jmp LookupLoopIsZero
;;; do {
;;; match = s->window + cur_match;
;;; if (*(ushf*)(match+best_len-1) != scan_end ||
;;; *(ushf*)match != scan_start) continue;
;;; [...]
;;; } while ((cur_match = prev[cur_match & wmask]) > limit
;;; && --chain_length != 0);
;;;
;;; Here is the inner loop of the function. The function will spend the
;;; majority of its time in this loop, and majority of that time will
;;; be spent in the first ten instructions.
;;;
;;; Within this loop:
;;; ebx = scanend
;;; r8d = curmatch
;;; edx = chainlenwmask - i.e., ((chainlen << 16) | wmask)
;;; esi = windowbestlen - i.e., (window + bestlen)
;;; edi = prev
;;; ebp = limit
LookupLoop:
and r8d, edx
movzx r8d, word ptr [rdi + r8*2]
cmp r8d, ebp
jbe LeaveNow
sub edx, 00010000h
js LeaveNow
LoopEntry:
cmp bx,word ptr [rsi + r8 - 1]
jnz LookupLoop1
LookupLoopIsZero:
cmp r12w, word ptr [r10 + r8]
jnz LookupLoop1
;;; Store the current value of chainlen.
mov [chainlenwmask], edx
;;; Point edi to the string under scrutiny, and esi to the string we
;;; are hoping to match it up with. In actuality, esi and edi are
;;; both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and edx is
;;; initialized to -(MAX_MATCH_8 - scanalign).
lea rsi,[r8+r10]
mov rdx, 0fffffffffffffef8h; -(MAX_MATCH_8)
lea rsi, [rsi + r13 + 0108h] ;MAX_MATCH_8]
lea rdi, [r9 + r13 + 0108h] ;MAX_MATCH_8]
prefetcht1 [rsi+rdx]
prefetcht1 [rdi+rdx]
;;; Test the strings for equality, 8 bytes at a time. At the end,
;;; adjust edx so that it is offset to the exact byte that mismatched.
;;;
;;; We already know at this point that the first three bytes of the
;;; strings match each other, and they can be safely passed over before
;;; starting the compare loop. So what this code does is skip over 0-3
;;; bytes, as much as necessary in order to dword-align the edi
;;; pointer. (esi will still be misaligned three times out of four.)
;;;
;;; It should be confessed that this loop usually does not represent
;;; much of the total running time. Replacing it with a more
;;; straightforward "rep cmpsb" would not drastically degrade
;;; performance.
;LoopCmps:
; mov eax, [rsi + rdx]
; xor eax, [rdi + rdx]
; jnz LeaveLoopCmps
; mov eax, [rsi + rdx + 4]
; xor eax, [rdi + rdx + 4]
; jnz LeaveLoopCmps4
; add rdx, 8
; jnz LoopCmps
; jmp LenMaximum
;LeaveLoopCmps4: add rdx, 4
;LeaveLoopCmps: test eax, 0000FFFFh
; jnz LenLower
; add rdx, 2
; shr eax, 16
;LenLower: sub al, 1
; adc rdx, 0
LoopCmps:
mov rax, [rsi + rdx]
xor rax, [rdi + rdx]
jnz LeaveLoopCmps
mov rax, [rsi + rdx + 8]
xor rax, [rdi + rdx + 8]
jnz LeaveLoopCmps8
mov rax, [rsi + rdx + 8+8]
xor rax, [rdi + rdx + 8+8]
jnz LeaveLoopCmps16
add rdx,8+8+8
jmp short LoopCmps
LeaveLoopCmps16: add rdx,8
LeaveLoopCmps8: add rdx,8
LeaveLoopCmps:
test eax, 0000FFFFh
jnz LenLower
test eax,0ffffffffh
jnz LenLower32
add rdx,4
shr rax,32
or ax,ax
jnz LenLower
LenLower32:
shr eax,16
add rdx,2
LenLower: sub al, 1
adc rdx, 0
;;; Calculate the length of the match. If it is longer than MAX_MATCH,
;;; then automatically accept it as the best possible match and leave.
lea rax, [rdi + rdx]
sub rax, r9
cmp eax, MAX_MATCH
jge LenMaximum
;;; If the length of the match is not longer than the best match we
;;; have so far, then forget it and return to the lookup loop.
;///////////////////////////////////
cmp eax, r11d
jg LongerMatch
lea rsi,[r10+r11]
mov rdi, [rcx + dsPrev]
mov edx, [chainlenwmask]
jmp LookupLoop
;;; s->match_start = cur_match;
;;; best_len = len;
;;; if (len >= nice_match) break;
;;; scan_end = *(ushf*)(scan+best_len-1);
LongerMatch:
mov r11d, eax
mov [rcx + dsMatchStart], r8d
cmp eax, [nicematch]
jge LeaveNow
lea rsi,[r10+rax]
movzx ebx, word ptr [r9 + rax - 1]
mov rdi, [rcx + dsPrev]
mov edx, [chainlenwmask]
jmp LookupLoop
;;; Accept the current string, with the maximum possible length.
LenMaximum:
mov r11d,MAX_MATCH
mov [rcx + dsMatchStart], r8d
;;; if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
;;; return s->lookahead;
LeaveNow:
mov eax, [rcx + dsLookahead]
cmp r11d, eax
cmovng eax, r11d
;;; Restore the stack and return from whence we came.
mov rsi,[save_rsi]
mov rdi,[save_rdi]
mov rbx,[save_rbx]
mov rbp,[save_rbp]
mov r12,[save_r12]
mov r13,[save_r13]
; mov r14,[save_r14]
; mov r15,[save_r15]
ret 0
; please don't remove this string !
; Your can freely use gvmat32 in any free or commercial app if you don't remove the string in the binary!
db 0dh,0ah,"asm686 with masm, optimised assembly code from Brian Raiter, written 1998, converted to amd 64 by Gilles Vollant 2005",0dh,0ah,0
longest_match ENDP
match_init PROC
ret 0
match_init ENDP
END
contrib/masmx64/inffas8664.c 0 → 100644
浏览文件 @ 6b8233bf
/* inffas8664.c is a hand tuned assembler version of inffast.c - fast decoding
* version for AMD64 on Windows using Microsoft C compiler
*
* Copyright (C) 1995-2003 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*
* Copyright (C) 2003 Chris Anderson <christop@charm.net>
* Please use the copyright conditions above.
*
* 2005 - Adaptation to Microsoft C Compiler for AMD64 by Gilles Vollant
*
* inffas8664.c call function inffas8664fnc in inffasx64.asm
* inffasx64.asm is automatically convert from AMD64 portion of inffas86.c
*
* Dec-29-2003 -- I added AMD64 inflate asm support. This version is also
* slightly quicker on x86 systems because, instead of using rep movsb to copy
* data, it uses rep movsw, which moves data in 2-byte chunks instead of single
* bytes. I've tested the AMD64 code on a Fedora Core 1 + the x86_64 updates
* from http://fedora.linux.duke.edu/fc1_x86_64
* which is running on an Athlon 64 3000+ / Gigabyte GA-K8VT800M system with
* 1GB ram. The 64-bit version is about 4% faster than the 32-bit version,
* when decompressing mozilla-source-1.3.tar.gz.
*
* Mar-13-2003 -- Most of this is derived from inffast.S which is derived from
* the gcc -S output of zlib-1.2.0/inffast.c. Zlib-1.2.0 is in beta release at
* the moment. I have successfully compiled and tested this code with gcc2.96,
* gcc3.2, icc5.0, msvc6.0. It is very close to the speed of inffast.S
* compiled with gcc -DNO_MMX, but inffast.S is still faster on the P3 with MMX
* enabled. I will attempt to merge the MMX code into this version. Newer
* versions of this and inffast.S can be found at
* http://www.eetbeetee.com/zlib/ and http://www.charm.net/~christop/zlib/
*
*/
#include <stdio.h>
#include "zutil.h"
#include "inftrees.h"
#include "inflate.h"
#include "inffast.h"
/* Mark Adler's comments from inffast.c: */
/*
Decode literal, length, and distance codes and write out the resulting
literal and match bytes until either not enough input or output is
available, an end-of-block is encountered, or a data error is encountered.
When large enough input and output buffers are supplied to inflate(), for
example, a 16K input buffer and a 64K output buffer, more than 95% of the
inflate execution time is spent in this routine.
Entry assumptions:
state->mode == LEN
strm->avail_in >= 6
strm->avail_out >= 258
start >= strm->avail_out
state->bits < 8
On return, state->mode is one of:
LEN -- ran out of enough output space or enough available input
TYPE -- reached end of block code, inflate() to interpret next block
BAD -- error in block data
Notes:
- The maximum input bits used by a length/distance pair is 15 bits for the
length code, 5 bits for the length extra, 15 bits for the distance code,
and 13 bits for the distance extra. This totals 48 bits, or six bytes.
Therefore if strm->avail_in >= 6, then there is enough input to avoid
checking for available input while decoding.
- The maximum bytes that a single length/distance pair can output is 258
bytes, which is the maximum length that can be coded. inflate_fast()
requires strm->avail_out >= 258 for each loop to avoid checking for
output space.
*/
typedef struct inffast_ar {
/* 64 32 x86 x86_64 */
/* ar offset register */
/* 0 0 */ void *esp; /* esp save */
/* 8 4 */ void *ebp; /* ebp save */
/* 16 8 */ unsigned char FAR *in; /* esi rsi local strm->next_in */
/* 24 12 */ unsigned char FAR *last; /* r9 while in < last */
/* 32 16 */ unsigned char FAR *out; /* edi rdi local strm->next_out */
/* 40 20 */ unsigned char FAR *beg; /* inflate()'s init next_out */
/* 48 24 */ unsigned char FAR *end; /* r10 while out < end */
/* 56 28 */ unsigned char FAR *window;/* size of window, wsize!=0 */
/* 64 32 */ code const FAR *lcode; /* ebp rbp local strm->lencode */
/* 72 36 */ code const FAR *dcode; /* r11 local strm->distcode */
/* 80 40 */ size_t /*unsigned long */hold; /* edx rdx local strm->hold */
/* 88 44 */ unsigned bits; /* ebx rbx local strm->bits */
/* 92 48 */ unsigned wsize; /* window size */
/* 96 52 */ unsigned write; /* window write index */
/*100 56 */ unsigned lmask; /* r12 mask for lcode */
/*104 60 */ unsigned dmask; /* r13 mask for dcode */
/*108 64 */ unsigned len; /* r14 match length */
/*112 68 */ unsigned dist; /* r15 match distance */
/*116 72 */ unsigned status; /* set when state chng*/
} type_ar;
#ifdef ASMINF
void inflate_fast(strm, start)
z_streamp strm;
unsigned start; /* inflate()'s starting value for strm->avail_out */
{
struct inflate_state FAR *state;
type_ar ar;
void inffas8664fnc(struct inffast_ar * par);
#if (defined( __GNUC__ ) && defined( __amd64__ ) && ! defined( __i386 )) || (defined(_MSC_VER) && defined(_M_AMD64))
#define PAD_AVAIL_IN 6
#define PAD_AVAIL_OUT 258
#else
#define PAD_AVAIL_IN 5
#define PAD_AVAIL_OUT 257
#endif
/* copy state to local variables */
state = (struct inflate_state FAR *)strm->state;
ar.in = strm->next_in;
ar.last = ar.in + (strm->avail_in - PAD_AVAIL_IN);
ar.out = strm->next_out;
ar.beg = ar.out - (start - strm->avail_out);
ar.end = ar.out + (strm->avail_out - PAD_AVAIL_OUT);
ar.wsize = state->wsize;
ar.write = state->write;
ar.window = state->window;
ar.hold = state->hold;
ar.bits = state->bits;
ar.lcode = state->lencode;
ar.dcode = state->distcode;
ar.lmask = (1U << state->lenbits) - 1;
ar.dmask = (1U << state->distbits) - 1;
/* decode literals and length/distances until end-of-block or not enough
input data or output space */
/* align in on 1/2 hold size boundary */
while (((size_t)(void *)ar.in & (sizeof(ar.hold) / 2 - 1)) != 0) {
ar.hold += (unsigned long)*ar.in++ << ar.bits;
ar.bits += 8;
}
inffas8664fnc(&ar);
if (ar.status > 1) {
if (ar.status == 2)
strm->msg = "invalid literal/length code";
else if (ar.status == 3)
strm->msg = "invalid distance code";
else
strm->msg = "invalid distance too far back";
state->mode = BAD;
}
else if ( ar.status == 1 ) {
state->mode = TYPE;
}
/* return unused bytes (on entry, bits < 8, so in won't go too far back) */
ar.len = ar.bits >> 3;
ar.in -= ar.len;
ar.bits -= ar.len << 3;
ar.hold &= (1U << ar.bits) - 1;
/* update state and return */
strm->next_in = ar.in;
strm->next_out = ar.out;
strm->avail_in = (unsigned)(ar.in < ar.last ?
PAD_AVAIL_IN + (ar.last - ar.in) :
PAD_AVAIL_IN - (ar.in - ar.last));
strm->avail_out = (unsigned)(ar.out < ar.end ?
PAD_AVAIL_OUT + (ar.end - ar.out) :
PAD_AVAIL_OUT - (ar.out - ar.end));
state->hold = (unsigned long)ar.hold;
state->bits = ar.bits;
return;
}
#endif
contrib/masmx64/inffasx64.asm 0 → 100644
浏览文件 @ 6b8233bf
; inffasx64.asm is a hand tuned assembler version of inffast.c - fast decoding
; version for AMD64 on Windows using Microsoft C compiler
;
; inffasx64.asm is automatically convert from AMD64 portion of inffas86.c
; inffasx64.asm is called by inffas8664.c, which contain more info.
; to compile this file, I use option
; ml64.exe /Flinffasx64 /c /Zi inffasx64.asm
; with Microsoft Macro Assembler (x64) for AMD64
;
; ml64.exe is given with Visual Studio 2005, Windows 2003 server DDK
;
; (you can get Windows 2003 server DDK with ml64 and cl.exe for AMD64 from
; http://www.microsoft.com/whdc/devtools/ddk/default.mspx for low price)
;
.code
inffas8664fnc PROC
; see http://weblogs.asp.net/oldnewthing/archive/2004/01/14/58579.aspx and
; http://msdn.microsoft.com/library/en-us/kmarch/hh/kmarch/64bitAMD_8e951dd2-ee77-4728-8702-55ce4b5dd24a.xml.asp
;
; All registers must be preserved across the call, except for
; rax, rcx, rdx, r8, r-9, r10, and r11, which are scratch.
mov [rsp-8],rsi
mov [rsp-16],rdi
mov [rsp-24],r12
mov [rsp-32],r13
mov [rsp-40],r14
mov [rsp-48],r15
mov [rsp-56],rbx
mov rax,rcx
mov [rax+8], rbp ; /* save regs rbp and rsp */
mov [rax], rsp
mov rsp, rax ; /* make rsp point to &ar */
mov rsi, [rsp+16] ; /* rsi = in */
mov rdi, [rsp+32] ; /* rdi = out */
mov r9, [rsp+24] ; /* r9 = last */
mov r10, [rsp+48] ; /* r10 = end */
mov rbp, [rsp+64] ; /* rbp = lcode */
mov r11, [rsp+72] ; /* r11 = dcode */
mov rdx, [rsp+80] ; /* rdx = hold */
mov ebx, [rsp+88] ; /* ebx = bits */
mov r12d, [rsp+100] ; /* r12d = lmask */
mov r13d, [rsp+104] ; /* r13d = dmask */
; /* r14d = len */
; /* r15d = dist */
cld
cmp r10, rdi
je L_one_time ; /* if only one decode left */
cmp r9, rsi
jne L_do_loop
L_one_time:
mov r8, r12 ; /* r8 = lmask */
cmp bl, 32
ja L_get_length_code_one_time
lodsd ; /* eax = *(uint *)in++ */
mov cl, bl ; /* cl = bits, needs it for shifting */
add bl, 32 ; /* bits += 32 */
shl rax, cl
or rdx, rax ; /* hold |= *((uint *)in)++ << bits */
jmp L_get_length_code_one_time
ALIGN 4
L_while_test:
cmp r10, rdi
jbe L_break_loop
cmp r9, rsi
jbe L_break_loop
L_do_loop:
mov r8, r12 ; /* r8 = lmask */
cmp bl, 32
ja L_get_length_code ; /* if (32 < bits) */
lodsd ; /* eax = *(uint *)in++ */
mov cl, bl ; /* cl = bits, needs it for shifting */
add bl, 32 ; /* bits += 32 */
shl rax, cl
or rdx, rax ; /* hold |= *((uint *)in)++ << bits */
L_get_length_code:
and r8, rdx ; /* r8 &= hold */
mov eax, [rbp+r8*4] ; /* eax = lcode[hold & lmask] */
mov cl, ah ; /* cl = this.bits */
sub bl, ah ; /* bits -= this.bits */
shr rdx, cl ; /* hold >>= this.bits */
test al, al
jnz L_test_for_length_base ; /* if (op != 0) 45.7% */
mov r8, r12 ; /* r8 = lmask */
shr eax, 16 ; /* output this.val char */
stosb
L_get_length_code_one_time:
and r8, rdx ; /* r8 &= hold */
mov eax, [rbp+r8*4] ; /* eax = lcode[hold & lmask] */
L_dolen:
mov cl, ah ; /* cl = this.bits */
sub bl, ah ; /* bits -= this.bits */
shr rdx, cl ; /* hold >>= this.bits */
test al, al
jnz L_test_for_length_base ; /* if (op != 0) 45.7% */
shr eax, 16 ; /* output this.val char */
stosb
jmp L_while_test
ALIGN 4
L_test_for_length_base:
mov r14d, eax ; /* len = this */
shr r14d, 16 ; /* len = this.val */
mov cl, al
test al, 16
jz L_test_for_second_level_length ; /* if ((op & 16) == 0) 8% */
and cl, 15 ; /* op &= 15 */
jz L_decode_distance ; /* if (!op) */
L_add_bits_to_len:
sub bl, cl
xor eax, eax
inc eax
shl eax, cl
dec eax
and eax, edx ; /* eax &= hold */
shr rdx, cl
add r14d, eax ; /* len += hold & mask[op] */
L_decode_distance:
mov r8, r13 ; /* r8 = dmask */
cmp bl, 32
ja L_get_distance_code ; /* if (32 < bits) */
lodsd ; /* eax = *(uint *)in++ */
mov cl, bl ; /* cl = bits, needs it for shifting */
add bl, 32 ; /* bits += 32 */
shl rax, cl
or rdx, rax ; /* hold |= *((uint *)in)++ << bits */
L_get_distance_code:
and r8, rdx ; /* r8 &= hold */
mov eax, [r11+r8*4] ; /* eax = dcode[hold & dmask] */
L_dodist:
mov r15d, eax ; /* dist = this */
shr r15d, 16 ; /* dist = this.val */
mov cl, ah
sub bl, ah ; /* bits -= this.bits */
shr rdx, cl ; /* hold >>= this.bits */
mov cl, al ; /* cl = this.op */
test al, 16 ; /* if ((op & 16) == 0) */
jz L_test_for_second_level_dist
and cl, 15 ; /* op &= 15 */
jz L_check_dist_one
L_add_bits_to_dist:
sub bl, cl
xor eax, eax
inc eax
shl eax, cl
dec eax ; /* (1 << op) - 1 */
and eax, edx ; /* eax &= hold */
shr rdx, cl
add r15d, eax ; /* dist += hold & ((1 << op) - 1) */
L_check_window:
mov r8, rsi ; /* save in so from can use it's reg */
mov rax, rdi
sub rax, [rsp+40] ; /* nbytes = out - beg */
cmp eax, r15d
jb L_clip_window ; /* if (dist > nbytes) 4.2% */
mov ecx, r14d ; /* ecx = len */
mov rsi, rdi
sub rsi, r15 ; /* from = out - dist */
sar ecx, 1
jnc L_copy_two ; /* if len % 2 == 0 */
rep movsw
mov al, [rsi]
mov [rdi], al
inc rdi
mov rsi, r8 ; /* move in back to %rsi, toss from */
jmp L_while_test
L_copy_two:
rep movsw
mov rsi, r8 ; /* move in back to %rsi, toss from */
jmp L_while_test
ALIGN 4
L_check_dist_one:
cmp r15d, 1 ; /* if dist 1, is a memset */
jne L_check_window
cmp [rsp+40], rdi ; /* if out == beg, outside window */
je L_check_window
mov ecx, r14d ; /* ecx = len */
mov al, [rdi-1]
mov ah, al
sar ecx, 1
jnc L_set_two
mov [rdi], al
inc rdi
L_set_two:
rep stosw
jmp L_while_test
ALIGN 4
L_test_for_second_level_length:
test al, 64
jnz L_test_for_end_of_block ; /* if ((op & 64) != 0) */
xor eax, eax
inc eax
shl eax, cl
dec eax
and eax, edx ; /* eax &= hold */
add eax, r14d ; /* eax += len */
mov eax, [rbp+rax*4] ; /* eax = lcode[val+(hold&mask[op])]*/
jmp L_dolen
ALIGN 4
L_test_for_second_level_dist:
test al, 64
jnz L_invalid_distance_code ; /* if ((op & 64) != 0) */
xor eax, eax
inc eax
shl eax, cl
dec eax
and eax, edx ; /* eax &= hold */
add eax, r15d ; /* eax += dist */
mov eax, [r11+rax*4] ; /* eax = dcode[val+(hold&mask[op])]*/
jmp L_dodist
ALIGN 4
L_clip_window:
mov ecx, eax ; /* ecx = nbytes */
mov eax, [rsp+92] ; /* eax = wsize, prepare for dist cmp */
neg ecx ; /* nbytes = -nbytes */
cmp eax, r15d
jb L_invalid_distance_too_far ; /* if (dist > wsize) */
add ecx, r15d ; /* nbytes = dist - nbytes */
cmp dword ptr [rsp+96], 0
jne L_wrap_around_window ; /* if (write != 0) */
mov rsi, [rsp+56] ; /* from = window */
sub eax, ecx ; /* eax -= nbytes */
add rsi, rax ; /* from += wsize - nbytes */
mov eax, r14d ; /* eax = len */
cmp r14d, ecx
jbe L_do_copy ; /* if (nbytes >= len) */
sub eax, ecx ; /* eax -= nbytes */
rep movsb
mov rsi, rdi
sub rsi, r15 ; /* from = &out[ -dist ] */
jmp L_do_copy
ALIGN 4
L_wrap_around_window:
mov eax, [rsp+96] ; /* eax = write */
cmp ecx, eax
jbe L_contiguous_in_window ; /* if (write >= nbytes) */
mov esi, [rsp+92] ; /* from = wsize */
add rsi, [rsp+56] ; /* from += window */
add rsi, rax ; /* from += write */
sub rsi, rcx ; /* from -= nbytes */
sub ecx, eax ; /* nbytes -= write */
mov eax, r14d ; /* eax = len */
cmp eax, ecx
jbe L_do_copy ; /* if (nbytes >= len) */
sub eax, ecx ; /* len -= nbytes */
rep movsb
mov rsi, [rsp+56] ; /* from = window */
mov ecx, [rsp+96] ; /* nbytes = write */
cmp eax, ecx
jbe L_do_copy ; /* if (nbytes >= len) */
sub eax, ecx ; /* len -= nbytes */
rep movsb
mov rsi, rdi
sub rsi, r15 ; /* from = out - dist */
jmp L_do_copy
ALIGN 4
L_contiguous_in_window:
mov rsi, [rsp+56] ; /* rsi = window */
add rsi, rax
sub rsi, rcx ; /* from += write - nbytes */
mov eax, r14d ; /* eax = len */
cmp eax, ecx
jbe L_do_copy ; /* if (nbytes >= len) */
sub eax, ecx ; /* len -= nbytes */
rep movsb
mov rsi, rdi
sub rsi, r15 ; /* from = out - dist */
jmp L_do_copy ; /* if (nbytes >= len) */
ALIGN 4
L_do_copy:
mov ecx, eax ; /* ecx = len */
rep movsb
mov rsi, r8 ; /* move in back to %esi, toss from */
jmp L_while_test
L_test_for_end_of_block:
test al, 32
jz L_invalid_literal_length_code
mov dword ptr [rsp+116], 1
jmp L_break_loop_with_status
L_invalid_literal_length_code:
mov dword ptr [rsp+116], 2
jmp L_break_loop_with_status
L_invalid_distance_code:
mov dword ptr [rsp+116], 3
jmp L_break_loop_with_status
L_invalid_distance_too_far:
mov dword ptr [rsp+116], 4
jmp L_break_loop_with_status
L_break_loop:
mov dword ptr [rsp+116], 0
L_break_loop_with_status:
; /* put in, out, bits, and hold back into ar and pop esp */
mov [rsp+16], rsi ; /* in */
mov [rsp+32], rdi ; /* out */
mov [rsp+88], ebx ; /* bits */
mov [rsp+80], rdx ; /* hold */
mov rax, [rsp] ; /* restore rbp and rsp */
mov rbp, [rsp+8]
mov rsp, rax
mov rsi,[rsp-8]
mov rdi,[rsp-16]
mov r12,[rsp-24]
mov r13,[rsp-32]
mov r14,[rsp-40]
mov r15,[rsp-48]
mov rbx,[rsp-56]
ret 0
; :
; : "m" (ar)
; : "memory", "%rax", "%rbx", "%rcx", "%rdx", "%rsi", "%rdi",
; "%r8", "%r9", "%r10", "%r11", "%r12", "%r13", "%r14", "%r15"
; );
inffas8664fnc ENDP
;_TEXT ENDS
END
contrib/masmx64/readme.txt 0 → 100644
浏览文件 @ 6b8233bf
Summary
-------
This directory contains ASM implementations of the functions
longest_match() and inflate_fast(), for 64 bits x86 (both AMD64 and Intel EM64t),
for use with Microsoft Macro Assembler (x64) for AMD64 and Microsoft C++ 64 bits.
gvmat64.asm is written by Gilles Vollant (2005), by using Brian Raiter 686/32 bits
assembly optimized version from Jean-loup Gailly original longest_match function
inffasx64.asm and inffas8664.c were written by Chris Anderson, by optimizing
original function from Mark Adler
Use instructions
----------------
Copy these files into the zlib source directory.
define ASMV and ASMINF in your project. Include inffas8664.c in your source tree,
and inffasx64.obj and gvmat64.obj as object to link.
Build instructions
------------------
run bld_64.bat with Microsoft Macro Assembler (x64) for AMD64 (ml64.exe)
ml64.exe is given with Visual Studio 2005, Windows 2003 server DDK
You can get Windows 2003 server DDK with ml64 and cl for AMD64 from
http://www.microsoft.com/whdc/devtools/ddk/default.mspx for low price)
contrib/masmx86/bld_ml32.bat 0 → 100644
浏览文件 @ 6b8233bf
ml /coff /Zi /c /Flgvmat32.lst gvmat32.asm
ml /coff /Zi /c /Flinffas32.lst inffas32.asm
contrib/masmx86/gvmat32.asm
浏览文件 @ 6b8233bf
此差异已折叠。
contrib/masmx86/gvmat32c.c
浏览文件 @ 6b8233bf
/* gvmat32.c -- C portion of the optimized longest_match for 32 bits x86
* Copyright (C) 1995-1996 Jean-loup Gailly and Gilles Vollant.
* File written by Gilles Vollant, by modifiying the longest_match
* from Jean-loup Gailly in deflate.c
* it prepare all parameters and call the assembly longest_match_gvasm
* longest_match execute standard C code is wmask != 0x7fff
* (assembly code is faster with a fixed wmask)
*
*/
#include "deflate.h"
#ifdef ASMV
#define NIL 0
#define UNALIGNED_OK
/* if your C compiler don't add underline before function name,
define ADD_UNDERLINE_ASMFUNC */
#ifdef ADD_UNDERLINE_ASMFUNC
#define longest_match_7fff _longest_match_7fff
#define longest_match_686 _longest_match_686
#define cpudetect32 _cpudetect32
#endif
void match_init()
{
}
unsigned long cpudetect32();
uInt longest_match_c(
deflate_state *s,
IPos cur_match); /* current match */
uInt longest_match_7fff(
deflate_state *s,
IPos cur_match); /* current match */
uInt longest_match_686(
deflate_state *s,
IPos cur_match); /* current match */
uInt longest_match(
deflate_state *s,
IPos cur_match) /* current match */
{
static uInt iIsPPro=2;
if ((s->w_mask == 0x7fff) && (iIsPPro==0))
return longest_match_7fff(s,cur_match);
if (iIsPPro==1)
return longest_match_686(s,cur_match);
if (iIsPPro==2)
iIsPPro = (((cpudetect32()/0x100)&0xf)>=6) ? 1 : 0;
return longest_match_c(s,cur_match);
}
uInt longest_match_c(s, cur_match)
deflate_state *s;
IPos cur_match; /* current match */
{
unsigned chain_length = s->max_chain_length;/* max hash chain length */
register Bytef *scan = s->window + s->strstart; /* current string */
register Bytef *match; /* matched string */
register int len; /* length of current match */
int best_len = s->prev_length; /* best match length so far */
int nice_match = s->nice_match; /* stop if match long enough */
IPos limit = s->strstart > (IPos)MAX_DIST(s) ?
s->strstart - (IPos)MAX_DIST(s) : NIL;
/* Stop when cur_match becomes <= limit. To simplify the code,
* we prevent matches with the string of window index 0.
*/
Posf *prev = s->prev;
uInt wmask = s->w_mask;
#ifdef UNALIGNED_OK
/* Compare two bytes at a time. Note: this is not always beneficial.
* Try with and without -DUNALIGNED_OK to check.
*/
register Bytef *strend = s->window + s->strstart + MAX_MATCH - 1;
register ush scan_start = *(ushf*)scan;
register ush scan_end = *(ushf*)(scan+best_len-1);
#else
register Bytef *strend = s->window + s->strstart + MAX_MATCH;
register Byte scan_end1 = scan[best_len-1];
register Byte scan_end = scan[best_len];
#endif
/* The code is optimized for HASH_BITS >= 8 and MAX_MATCH-2 multiple of 16.
* It is easy to get rid of this optimization if necessary.
*/
Assert(s->hash_bits >= 8 && MAX_MATCH == 258, "Code too clever");
/* Do not waste too much time if we already have a good match: */
if (s->prev_length >= s->good_match) {
chain_length >>= 2;
}
/* Do not look for matches beyond the end of the input. This is necessary
* to make deflate deterministic.
*/
if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;
Assert((ulg)s->strstart <= s->window_size-MIN_LOOKAHEAD, "need lookahead");
do {
Assert(cur_match < s->strstart, "no future");
match = s->window + cur_match;
/* Skip to next match if the match length cannot increase
* or if the match length is less than 2:
*/
#if (defined(UNALIGNED_OK) && MAX_MATCH == 258)
/* This code assumes sizeof(unsigned short) == 2. Do not use
* UNALIGNED_OK if your compiler uses a different size.
*/
if (*(ushf*)(match+best_len-1) != scan_end ||
*(ushf*)match != scan_start) continue;
/* It is not necessary to compare scan[2] and match[2] since they are
* always equal when the other bytes match, given that the hash keys
* are equal and that HASH_BITS >= 8. Compare 2 bytes at a time at
* strstart+3, +5, ... up to strstart+257. We check for insufficient
* lookahead only every 4th comparison; the 128th check will be made
* at strstart+257. If MAX_MATCH-2 is not a multiple of 8, it is
* necessary to put more guard bytes at the end of the window, or
* to check more often for insufficient lookahead.
*/
Assert(scan[2] == match[2], "scan[2]?");
scan++, match++;
do {
} while (*(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
*(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
*(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
*(ushf*)(scan+=2) == *(ushf*)(match+=2) &&
scan < strend);
/* The funny "do {}" generates better code on most compilers */
/* Here, scan <= window+strstart+257 */
Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
if (*scan == *match) scan++;
len = (MAX_MATCH - 1) - (int)(strend-scan);
scan = strend - (MAX_MATCH-1);
#else /* UNALIGNED_OK */
if (match[best_len] != scan_end ||
match[best_len-1] != scan_end1 ||
*match != *scan ||
*++match != scan[1]) continue;
/* The check at best_len-1 can be removed because it will be made
* again later. (This heuristic is not always a win.)
* It is not necessary to compare scan[2] and match[2] since they
* are always equal when the other bytes match, given that
* the hash keys are equal and that HASH_BITS >= 8.
*/
scan += 2, match++;
Assert(*scan == *match, "match[2]?");
/* We check for insufficient lookahead only every 8th comparison;
* the 256th check will be made at strstart+258.
*/
do {
} while (*++scan == *++match && *++scan == *++match &&
*++scan == *++match && *++scan == *++match &&
*++scan == *++match && *++scan == *++match &&
*++scan == *++match && *++scan == *++match &&
scan < strend);
Assert(scan <= s->window+(unsigned)(s->window_size-1), "wild scan");
len = MAX_MATCH - (int)(strend - scan);
scan = strend - MAX_MATCH;
#endif /* UNALIGNED_OK */
if (len > best_len) {
s->match_start = cur_match;
best_len = len;
if (len >= nice_match) break;
#ifdef UNALIGNED_OK
scan_end = *(ushf*)(scan+best_len-1);
#else
scan_end1 = scan[best_len-1];
scan_end = scan[best_len];
#endif
}
} while ((cur_match = prev[cur_match & wmask]) > limit
&& --chain_length != 0);
if ((uInt)best_len <= s->lookahead) return (uInt)best_len;
return s->lookahead;
}
#endif /* ASMV */
/* gvmat32.c -- C portion of the optimized longest_match for 32 bits x86
* Copyright (C) 1995-1996 Jean-loup Gailly and Gilles Vollant.
* File written by Gilles Vollant, by modifiying the longest_match
* from Jean-loup Gailly in deflate.c
* it prepare all parameters and call the assembly longest_match_gvasm
* longest_match execute standard C code is wmask != 0x7fff
* (assembly code is faster with a fixed wmask)
*
* Read comment at beginning of gvmat32.asm for more information
*/
#if defined(ASMV) && (!defined(NOOLDPENTIUMCODE))
#include "deflate.h"
/* if your C compiler don't add underline before function name,
define ADD_UNDERLINE_ASMFUNC */
#ifdef ADD_UNDERLINE_ASMFUNC
#define longest_match_7fff _longest_match_7fff
#define longest_match_686 _longest_match_686
#define cpudetect32 _cpudetect32
#endif
unsigned long cpudetect32();
uInt longest_match_c(
deflate_state *s,
IPos cur_match); /* current match */
uInt longest_match_7fff(
deflate_state *s,
IPos cur_match); /* current match */
uInt longest_match_686(
deflate_state *s,
IPos cur_match); /* current match */
static uInt iIsPPro=2;
void match_init ()
{
iIsPPro = (((cpudetect32()/0x100)&0xf)>=6) ? 1 : 0;
}
uInt longest_match(
deflate_state *s,
IPos cur_match) /* current match */
{
if (iIsPPro!=0)
return longest_match_686(s,cur_match);
if (s->w_mask != 0x7fff)
return longest_match_686(s,cur_match);
/* now ((s->w_mask == 0x7fff) && (iIsPPro==0)) */
return longest_match_7fff(s,cur_match);
}
#endif /* defined(ASMV) && (!defined(NOOLDPENTIUMCODE)) */
contrib/masmx86/inffas32.asm
浏览文件 @ 6b8233bf
此差异已折叠。
contrib/minizip/ChangeLogUnzip
浏览文件 @ 6b8233bf
Change in 1.01b (20 may 04)
- Integrate patch from Debian package (submited by Mark Brown)
- Add tools mztools from Xavier Roche
Change in 1.01 (8 may 04)
- fix buffer overrun risk in unzip.c (Xavier Roche)
- fix a minor buffer insecurity in minizip.c (Mike Whittaker)
Change in 1.00: (10 sept 03)
- rename to 1.00
- cosmetic code change
Change in 0.22: (19 May 03)
- crypting support (unless you define NOCRYPT)
- append file in existing zipfile
Change in 0.21: (10 Mar 03)
- bug fixes
Change in 0.17: (27 Jan 02)
- bug fixes
Change in 0.16: (19 Jan 02)
- Support of ioapi for virtualize zip file access
Change in 0.15: (19 Mar 98)
- fix memory leak in minizip.c
Change in 0.14: (10 Mar 98)
- fix bugs in minizip.c sample for zipping big file
- fix problem in month in date handling
- fix bug in unzlocal_GetCurrentFileInfoInternal in unzip.c for
comment handling
Change in 0.13: (6 Mar 98)
- fix bugs in zip.c
- add real minizip sample
Change in 0.12: (4 Mar 98)
- add zip.c and zip.h for creates .zip file
- fix change_file_date in miniunz.c for Unix (Jean-loup Gailly)
- fix miniunz.c for file without specific record for directory
Change in 0.11: (3 Mar 98)
- fix bug in unzGetCurrentFileInfo for get extra field and comment
- enhance miniunz sample, remove the bad unztst.c sample
Change in 0.10: (2 Mar 98)
- fix bug in unzReadCurrentFile
- rename unzip* to unz* function and structure
- remove Windows-like hungary notation variable name
- modify some structure in unzip.h
- add somes comment in source
- remove unzipGetcCurrentFile function
- replace ZUNZEXPORT by ZEXPORT
- add unzGetLocalExtrafield for get the local extrafield info
- add a new sample, miniunz.c
Change in 0.4: (25 Feb 98)
- suppress the type unzipFileInZip.
Only on file in the zipfile can be open at the same time
- fix somes typo in code
- added tm_unz structure in unzip_file_info (date/time in readable format)
Change in 1.01e (12 feb 05)
- Fix in zipOpen2 for globalcomment (Rolf Kalbermatter)
- Fix possible memory leak in unzip.c (Zoran Stevanovic)
Change in 1.01b (20 may 04)
- Integrate patch from Debian package (submited by Mark Brown)
- Add tools mztools from Xavier Roche
Change in 1.01 (8 may 04)
- fix buffer overrun risk in unzip.c (Xavier Roche)
- fix a minor buffer insecurity in minizip.c (Mike Whittaker)
Change in 1.00: (10 sept 03)
- rename to 1.00
- cosmetic code change
Change in 0.22: (19 May 03)
- crypting support (unless you define NOCRYPT)
- append file in existing zipfile
Change in 0.21: (10 Mar 03)
- bug fixes
Change in 0.17: (27 Jan 02)
- bug fixes
Change in 0.16: (19 Jan 02)
- Support of ioapi for virtualize zip file access
Change in 0.15: (19 Mar 98)
- fix memory leak in minizip.c
Change in 0.14: (10 Mar 98)
- fix bugs in minizip.c sample for zipping big file
- fix problem in month in date handling
- fix bug in unzlocal_GetCurrentFileInfoInternal in unzip.c for
comment handling
Change in 0.13: (6 Mar 98)
- fix bugs in zip.c
- add real minizip sample
Change in 0.12: (4 Mar 98)
- add zip.c and zip.h for creates .zip file
- fix change_file_date in miniunz.c for Unix (Jean-loup Gailly)
- fix miniunz.c for file without specific record for directory
Change in 0.11: (3 Mar 98)
- fix bug in unzGetCurrentFileInfo for get extra field and comment
- enhance miniunz sample, remove the bad unztst.c sample
Change in 0.10: (2 Mar 98)
- fix bug in unzReadCurrentFile
- rename unzip* to unz* function and structure
- remove Windows-like hungary notation variable name
- modify some structure in unzip.h
- add somes comment in source
- remove unzipGetcCurrentFile function
- replace ZUNZEXPORT by ZEXPORT
- add unzGetLocalExtrafield for get the local extrafield info
- add a new sample, miniunz.c
Change in 0.4: (25 Feb 98)
- suppress the type unzipFileInZip.
Only on file in the zipfile can be open at the same time
- fix somes typo in code
- added tm_unz structure in unzip_file_info (date/time in readable format)
contrib/minizip/Makefile
浏览文件 @ 6b8233bf
CC=cc
CFLAGS=-O -I../..
UNZ_OBJS = miniunz.o unzip.o ioapi.o ../../libz.a
ZIP_OBJS = minizip.o zip.o ioapi.o ../../libz.a
.c.o:
$(CC) -c $(CFLAGS) $*.c
all: miniunz minizip
miniunz: $(UNZ_OBJS)
$(CC) $(CFLAGS) -o $@ $(UNZ_OBJS)
minizip: $(ZIP_OBJS)
$(CC) $(CFLAGS) -o $@ $(ZIP_OBJS)
test: miniunz minizip
./minizip test readme.txt
./miniunz -l test.zip
mv readme.txt readme.old
./miniunz test.zip
clean:
/bin/rm -f *.o *~ minizip miniunz
CC=cc
CFLAGS=-O -I../..
UNZ_OBJS = miniunz.o unzip.o ioapi.o ../../libz.a
ZIP_OBJS = minizip.o zip.o ioapi.o ../../libz.a
.c.o:
$(CC) -c $(CFLAGS) $*.c
all: miniunz minizip
miniunz: $(UNZ_OBJS)
$(CC) $(CFLAGS) -o $@ $(UNZ_OBJS)
minizip: $(ZIP_OBJS)
$(CC) $(CFLAGS) -o $@ $(ZIP_OBJS)
test: miniunz minizip
./minizip test readme.txt
./miniunz -l test.zip
mv readme.txt readme.old
./miniunz test.zip
clean:
/bin/rm -f *.o *~ minizip miniunz
contrib/minizip/crypt.h
浏览文件 @ 6b8233bf
/* crypt.h -- base code for crypt/uncrypt ZIPfile
Version 1.01, May 8th, 2004
Copyright (C) 1998-2004 Gilles Vollant
This code is a modified version of crypting code in Infozip distribution
The encryption/decryption parts of this source code (as opposed to the
non-echoing password parts) were originally written in Europe. The
whole source package can be freely distributed, including from the USA.
(Prior to January 2000, re-export from the US was a violation of US law.)
This encryption code is a direct transcription of the algorithm from
Roger Schlafly, described by Phil Katz in the file appnote.txt. This
file (appnote.txt) is distributed with the PKZIP program (even in the
version without encryption capabilities).
If you don't need crypting in your application, just define symbols
NOCRYPT and NOUNCRYPT.
This code support the "Traditional PKWARE Encryption".
The new AES encryption added on Zip format by Winzip (see the page
http://www.winzip.com/aes_info.htm ) and PKWare PKZip 5.x Strong
Encryption is not supported.
*/
#define CRC32(c, b) ((*(pcrc_32_tab+(((int)(c) ^ (b)) & 0xff))) ^ ((c) >> 8))
/***********************************************************************
* Return the next byte in the pseudo-random sequence
*/
static int decrypt_byte(unsigned long* pkeys, const unsigned long* pcrc_32_tab)
{
unsigned temp; /* POTENTIAL BUG: temp*(temp^1) may overflow in an
* unpredictable manner on 16-bit systems; not a problem
* with any known compiler so far, though */
temp = ((unsigned)(*(pkeys+2)) & 0xffff) | 2;
return (int)(((temp * (temp ^ 1)) >> 8) & 0xff);
}
/***********************************************************************
* Update the encryption keys with the next byte of plain text
*/
static int update_keys(unsigned long* pkeys,const unsigned long* pcrc_32_tab,int c)
{
(*(pkeys+0)) = CRC32((*(pkeys+0)), c);
(*(pkeys+1)) += (*(pkeys+0)) & 0xff;
(*(pkeys+1)) = (*(pkeys+1)) * 134775813L + 1;
{
register int keyshift = (int)((*(pkeys+1)) >> 24);
(*(pkeys+2)) = CRC32((*(pkeys+2)), keyshift);
}
return c;
}
/***********************************************************************
* Initialize the encryption keys and the random header according to
* the given password.
*/
static void init_keys(const char* passwd,unsigned long* pkeys,const unsigned long* pcrc_32_tab)
{
*(pkeys+0) = 305419896L;
*(pkeys+1) = 591751049L;
*(pkeys+2) = 878082192L;
while (*passwd != '\0') {
update_keys(pkeys,pcrc_32_tab,(int)*passwd);
passwd++;
}
}
#define zdecode(pkeys,pcrc_32_tab,c) \
(update_keys(pkeys,pcrc_32_tab,c ^= decrypt_byte(pkeys,pcrc_32_tab)))
#define zencode(pkeys,pcrc_32_tab,c,t) \
(t=decrypt_byte(pkeys,pcrc_32_tab), update_keys(pkeys,pcrc_32_tab,c), t^(c))
#ifdef INCLUDECRYPTINGCODE_IFCRYPTALLOWED
#define RAND_HEAD_LEN 12
/* "last resort" source for second part of crypt seed pattern */
# ifndef ZCR_SEED2
# define ZCR_SEED2 3141592654UL /* use PI as default pattern */
# endif
static int crypthead(passwd, buf, bufSize, pkeys, pcrc_32_tab, crcForCrypting)
const char *passwd; /* password string */
unsigned char *buf; /* where to write header */
int bufSize;
unsigned long* pkeys;
const unsigned long* pcrc_32_tab;
unsigned long crcForCrypting;
{
int n; /* index in random header */
int t; /* temporary */
int c; /* random byte */
unsigned char header[RAND_HEAD_LEN-2]; /* random header */
static unsigned calls = 0; /* ensure different random header each time */
if (bufSize<RAND_HEAD_LEN)
return 0;
/* First generate RAND_HEAD_LEN-2 random bytes. We encrypt the
* output of rand() to get less predictability, since rand() is
* often poorly implemented.
*/
if (++calls == 1)
{
srand((unsigned)(time(NULL) ^ ZCR_SEED2));
}
init_keys(passwd, pkeys, pcrc_32_tab);
for (n = 0; n < RAND_HEAD_LEN-2; n++)
{
c = (rand() >> 7) & 0xff;
header[n] = (unsigned char)zencode(pkeys, pcrc_32_tab, c, t);
}
/* Encrypt random header (last two bytes is high word of crc) */
init_keys(passwd, pkeys, pcrc_32_tab);
for (n = 0; n < RAND_HEAD_LEN-2; n++)
{
buf[n] = (unsigned char)zencode(pkeys, pcrc_32_tab, header[n], t);
}
buf[n++] = zencode(pkeys, pcrc_32_tab, (int)(crcForCrypting >> 16) & 0xff, t);
buf[n++] = zencode(pkeys, pcrc_32_tab, (int)(crcForCrypting >> 24) & 0xff, t);
return n;
}
#endif
/* crypt.h -- base code for crypt/uncrypt ZIPfile
Version 1.01e, February 12th, 2005
Copyright (C) 1998-2005 Gilles Vollant
This code is a modified version of crypting code in Infozip distribution
The encryption/decryption parts of this source code (as opposed to the
non-echoing password parts) were originally written in Europe. The
whole source package can be freely distributed, including from the USA.
(Prior to January 2000, re-export from the US was a violation of US law.)
This encryption code is a direct transcription of the algorithm from
Roger Schlafly, described by Phil Katz in the file appnote.txt. This
file (appnote.txt) is distributed with the PKZIP program (even in the
version without encryption capabilities).
If you don't need crypting in your application, just define symbols
NOCRYPT and NOUNCRYPT.
This code support the "Traditional PKWARE Encryption".
The new AES encryption added on Zip format by Winzip (see the page
http://www.winzip.com/aes_info.htm ) and PKWare PKZip 5.x Strong
Encryption is not supported.
*/
#define CRC32(c, b) ((*(pcrc_32_tab+(((int)(c) ^ (b)) & 0xff))) ^ ((c) >> 8))
/***********************************************************************
* Return the next byte in the pseudo-random sequence
*/
static int decrypt_byte(unsigned long* pkeys, const unsigned long* pcrc_32_tab)
{
unsigned temp; /* POTENTIAL BUG: temp*(temp^1) may overflow in an
* unpredictable manner on 16-bit systems; not a problem
* with any known compiler so far, though */
temp = ((unsigned)(*(pkeys+2)) & 0xffff) | 2;
return (int)(((temp * (temp ^ 1)) >> 8) & 0xff);
}
/***********************************************************************
* Update the encryption keys with the next byte of plain text
*/
static int update_keys(unsigned long* pkeys,const unsigned long* pcrc_32_tab,int c)
{
(*(pkeys+0)) = CRC32((*(pkeys+0)), c);
(*(pkeys+1)) += (*(pkeys+0)) & 0xff;
(*(pkeys+1)) = (*(pkeys+1)) * 134775813L + 1;
{
register int keyshift = (int)((*(pkeys+1)) >> 24);
(*(pkeys+2)) = CRC32((*(pkeys+2)), keyshift);
}
return c;
}
/***********************************************************************
* Initialize the encryption keys and the random header according to
* the given password.
*/
static void init_keys(const char* passwd,unsigned long* pkeys,const unsigned long* pcrc_32_tab)
{
*(pkeys+0) = 305419896L;
*(pkeys+1) = 591751049L;
*(pkeys+2) = 878082192L;
while (*passwd != '\0') {
update_keys(pkeys,pcrc_32_tab,(int)*passwd);
passwd++;
}
}
#define zdecode(pkeys,pcrc_32_tab,c) \
(update_keys(pkeys,pcrc_32_tab,c ^= decrypt_byte(pkeys,pcrc_32_tab)))
#define zencode(pkeys,pcrc_32_tab,c,t) \
(t=decrypt_byte(pkeys,pcrc_32_tab), update_keys(pkeys,pcrc_32_tab,c), t^(c))
#ifdef INCLUDECRYPTINGCODE_IFCRYPTALLOWED
#define RAND_HEAD_LEN 12
/* "last resort" source for second part of crypt seed pattern */
# ifndef ZCR_SEED2
# define ZCR_SEED2 3141592654UL /* use PI as default pattern */
# endif
static int crypthead(passwd, buf, bufSize, pkeys, pcrc_32_tab, crcForCrypting)
const char *passwd; /* password string */
unsigned char *buf; /* where to write header */
int bufSize;
unsigned long* pkeys;
const unsigned long* pcrc_32_tab;
unsigned long crcForCrypting;
{
int n; /* index in random header */
int t; /* temporary */
int c; /* random byte */
unsigned char header[RAND_HEAD_LEN-2]; /* random header */
static unsigned calls = 0; /* ensure different random header each time */
if (bufSize<RAND_HEAD_LEN)
return 0;
/* First generate RAND_HEAD_LEN-2 random bytes. We encrypt the
* output of rand() to get less predictability, since rand() is
* often poorly implemented.
*/
if (++calls == 1)
{
srand((unsigned)(time(NULL) ^ ZCR_SEED2));
}
init_keys(passwd, pkeys, pcrc_32_tab);
for (n = 0; n < RAND_HEAD_LEN-2; n++)
{
c = (rand() >> 7) & 0xff;
header[n] = (unsigned char)zencode(pkeys, pcrc_32_tab, c, t);
}
/* Encrypt random header (last two bytes is high word of crc) */
init_keys(passwd, pkeys, pcrc_32_tab);
for (n = 0; n < RAND_HEAD_LEN-2; n++)
{
buf[n] = (unsigned char)zencode(pkeys, pcrc_32_tab, header[n], t);
}
buf[n++] = zencode(pkeys, pcrc_32_tab, (int)(crcForCrypting >> 16) & 0xff, t);
buf[n++] = zencode(pkeys, pcrc_32_tab, (int)(crcForCrypting >> 24) & 0xff, t);
return n;
}
#endif
contrib/minizip/ioapi.c
浏览文件 @ 6b8233bf
/* ioapi.c -- IO base function header for compress/uncompress .zip
files using zlib + zip or unzip API
Version 1.01, May 8th, 2004
Copyright (C) 1998-2004 Gilles Vollant
*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "zlib.h"
#include "ioapi.h"
/* I've found an old Unix (a SunOS 4.1.3_U1) without all SEEK_* defined.... */
#ifndef SEEK_CUR
#define SEEK_CUR 1
#endif
#ifndef SEEK_END
#define SEEK_END 2
#endif
#ifndef SEEK_SET
#define SEEK_SET 0
#endif
voidpf ZCALLBACK fopen_file_func OF((
voidpf opaque,
const char* filename,
int mode));
uLong ZCALLBACK fread_file_func OF((
voidpf opaque,
voidpf stream,
void* buf,
uLong size));
uLong ZCALLBACK fwrite_file_func OF((
voidpf opaque,
voidpf stream,
const void* buf,
uLong size));
long ZCALLBACK ftell_file_func OF((
voidpf opaque,
voidpf stream));
long ZCALLBACK fseek_file_func OF((
voidpf opaque,
voidpf stream,
uLong offset,
int origin));
int ZCALLBACK fclose_file_func OF((
voidpf opaque,
voidpf stream));
int ZCALLBACK ferror_file_func OF((
voidpf opaque,
voidpf stream));
voidpf ZCALLBACK fopen_file_func (opaque, filename, mode)
voidpf opaque;
const char* filename;
int mode;
{
FILE* file = NULL;
const char* mode_fopen = NULL;
if ((mode & ZLIB_FILEFUNC_MODE_READWRITEFILTER)==ZLIB_FILEFUNC_MODE_READ)
mode_fopen = "rb";
else
if (mode & ZLIB_FILEFUNC_MODE_EXISTING)
mode_fopen = "r+b";
else
if (mode & ZLIB_FILEFUNC_MODE_CREATE)
mode_fopen = "wb";
if ((filename!=NULL) && (mode_fopen != NULL))
file = fopen(filename, mode_fopen);
return file;
}
uLong ZCALLBACK fread_file_func (opaque, stream, buf, size)
voidpf opaque;
voidpf stream;
void* buf;
uLong size;
{
uLong ret;
ret = (uLong)fread(buf, 1, (size_t)size, (FILE *)stream);
return ret;
}
uLong ZCALLBACK fwrite_file_func (opaque, stream, buf, size)
voidpf opaque;
voidpf stream;
const void* buf;
uLong size;
{
uLong ret;
ret = (uLong)fwrite(buf, 1, (size_t)size, (FILE *)stream);
return ret;
}
long ZCALLBACK ftell_file_func (opaque, stream)
voidpf opaque;
voidpf stream;
{
long ret;
ret = ftell((FILE *)stream);
return ret;
}
long ZCALLBACK fseek_file_func (opaque, stream, offset, origin)
voidpf opaque;
voidpf stream;
uLong offset;
int origin;
{
int fseek_origin=0;
long ret;
switch (origin)
{
case ZLIB_FILEFUNC_SEEK_CUR :
fseek_origin = SEEK_CUR;
break;
case ZLIB_FILEFUNC_SEEK_END :
fseek_origin = SEEK_END;
break;
case ZLIB_FILEFUNC_SEEK_SET :
fseek_origin = SEEK_SET;
break;
default: return -1;
}
ret = 0;
fseek((FILE *)stream, offset, fseek_origin);
return ret;
}
int ZCALLBACK fclose_file_func (opaque, stream)
voidpf opaque;
voidpf stream;
{
int ret;
ret = fclose((FILE *)stream);
return ret;
}
int ZCALLBACK ferror_file_func (opaque, stream)
voidpf opaque;
voidpf stream;
{
int ret;
ret = ferror((FILE *)stream);
return ret;
}
void fill_fopen_filefunc (pzlib_filefunc_def)
zlib_filefunc_def* pzlib_filefunc_def;
{
pzlib_filefunc_def->zopen_file = fopen_file_func;
pzlib_filefunc_def->zread_file = fread_file_func;
pzlib_filefunc_def->zwrite_file = fwrite_file_func;
pzlib_filefunc_def->ztell_file = ftell_file_func;
pzlib_filefunc_def->zseek_file = fseek_file_func;
pzlib_filefunc_def->zclose_file = fclose_file_func;
pzlib_filefunc_def->zerror_file = ferror_file_func;
pzlib_filefunc_def->opaque = NULL;
}
/* ioapi.c -- IO base function header for compress/uncompress .zip
files using zlib + zip or unzip API
Version 1.01e, February 12th, 2005
Copyright (C) 1998-2005 Gilles Vollant
*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "zlib.h"
#include "ioapi.h"
/* I've found an old Unix (a SunOS 4.1.3_U1) without all SEEK_* defined.... */
#ifndef SEEK_CUR
#define SEEK_CUR 1
#endif
#ifndef SEEK_END
#define SEEK_END 2
#endif
#ifndef SEEK_SET
#define SEEK_SET 0
#endif
voidpf ZCALLBACK fopen_file_func OF((
voidpf opaque,
const char* filename,
int mode));
uLong ZCALLBACK fread_file_func OF((
voidpf opaque,
voidpf stream,
void* buf,
uLong size));
uLong ZCALLBACK fwrite_file_func OF((
voidpf opaque,
voidpf stream,
const void* buf,
uLong size));
long ZCALLBACK ftell_file_func OF((
voidpf opaque,
voidpf stream));
long ZCALLBACK fseek_file_func OF((
voidpf opaque,
voidpf stream,
uLong offset,
int origin));
int ZCALLBACK fclose_file_func OF((
voidpf opaque,
voidpf stream));
int ZCALLBACK ferror_file_func OF((
voidpf opaque,
voidpf stream));
voidpf ZCALLBACK fopen_file_func (opaque, filename, mode)
voidpf opaque;
const char* filename;
int mode;
{
FILE* file = NULL;
const char* mode_fopen = NULL;
if ((mode & ZLIB_FILEFUNC_MODE_READWRITEFILTER)==ZLIB_FILEFUNC_MODE_READ)
mode_fopen = "rb";
else
if (mode & ZLIB_FILEFUNC_MODE_EXISTING)
mode_fopen = "r+b";
else
if (mode & ZLIB_FILEFUNC_MODE_CREATE)
mode_fopen = "wb";
if ((filename!=NULL) && (mode_fopen != NULL))
file = fopen(filename, mode_fopen);
return file;
}
uLong ZCALLBACK fread_file_func (opaque, stream, buf, size)
voidpf opaque;
voidpf stream;
void* buf;
uLong size;
{
uLong ret;
ret = (uLong)fread(buf, 1, (size_t)size, (FILE *)stream);
return ret;
}
uLong ZCALLBACK fwrite_file_func (opaque, stream, buf, size)
voidpf opaque;
voidpf stream;
const void* buf;
uLong size;
{
uLong ret;
ret = (uLong)fwrite(buf, 1, (size_t)size, (FILE *)stream);
return ret;
}
long ZCALLBACK ftell_file_func (opaque, stream)
voidpf opaque;
voidpf stream;
{
long ret;
ret = ftell((FILE *)stream);
return ret;
}
long ZCALLBACK fseek_file_func (opaque, stream, offset, origin)
voidpf opaque;
voidpf stream;
uLong offset;
int origin;
{
int fseek_origin=0;
long ret;
switch (origin)
{
case ZLIB_FILEFUNC_SEEK_CUR :
fseek_origin = SEEK_CUR;
break;
case ZLIB_FILEFUNC_SEEK_END :
fseek_origin = SEEK_END;
break;
case ZLIB_FILEFUNC_SEEK_SET :
fseek_origin = SEEK_SET;
break;
default: return -1;
}
ret = 0;
fseek((FILE *)stream, offset, fseek_origin);
return ret;
}
int ZCALLBACK fclose_file_func (opaque, stream)
voidpf opaque;
voidpf stream;
{
int ret;
ret = fclose((FILE *)stream);
return ret;
}
int ZCALLBACK ferror_file_func (opaque, stream)
voidpf opaque;
voidpf stream;
{
int ret;
ret = ferror((FILE *)stream);
return ret;
}
void fill_fopen_filefunc (pzlib_filefunc_def)
zlib_filefunc_def* pzlib_filefunc_def;
{
pzlib_filefunc_def->zopen_file = fopen_file_func;
pzlib_filefunc_def->zread_file = fread_file_func;
pzlib_filefunc_def->zwrite_file = fwrite_file_func;
pzlib_filefunc_def->ztell_file = ftell_file_func;
pzlib_filefunc_def->zseek_file = fseek_file_func;
pzlib_filefunc_def->zclose_file = fclose_file_func;
pzlib_filefunc_def->zerror_file = ferror_file_func;
pzlib_filefunc_def->opaque = NULL;
}
contrib/minizip/ioapi.h
浏览文件 @ 6b8233bf
/* ioapi.h -- IO base function header for compress/uncompress .zip
files using zlib + zip or unzip API
Version 1.01, May 8th, 2004
Copyright (C) 1998-2004 Gilles Vollant
*/
#ifndef _ZLIBIOAPI_H
#define _ZLIBIOAPI_H
#define ZLIB_FILEFUNC_SEEK_CUR (1)
#define ZLIB_FILEFUNC_SEEK_END (2)
#define ZLIB_FILEFUNC_SEEK_SET (0)
#define ZLIB_FILEFUNC_MODE_READ (1)
#define ZLIB_FILEFUNC_MODE_WRITE (2)
#define ZLIB_FILEFUNC_MODE_READWRITEFILTER (3)
#define ZLIB_FILEFUNC_MODE_EXISTING (4)
#define ZLIB_FILEFUNC_MODE_CREATE (8)
#ifndef ZCALLBACK
#if (defined(WIN32) || defined (WINDOWS) || defined (_WINDOWS)) && defined(CALLBACK) && defined (USEWINDOWS_CALLBACK)
#define ZCALLBACK CALLBACK
#else
#define ZCALLBACK
#endif
#endif
#ifdef __cplusplus
extern "C" {
#endif
typedef voidpf (ZCALLBACK *open_file_func) OF((voidpf opaque, const char* filename, int mode));
typedef uLong (ZCALLBACK *read_file_func) OF((voidpf opaque, voidpf stream, void* buf, uLong size));
typedef uLong (ZCALLBACK *write_file_func) OF((voidpf opaque, voidpf stream, const void* buf, uLong size));
typedef long (ZCALLBACK *tell_file_func) OF((voidpf opaque, voidpf stream));
typedef long (ZCALLBACK *seek_file_func) OF((voidpf opaque, voidpf stream, uLong offset, int origin));
typedef int (ZCALLBACK *close_file_func) OF((voidpf opaque, voidpf stream));
typedef int (ZCALLBACK *testerror_file_func) OF((voidpf opaque, voidpf stream));
typedef struct zlib_filefunc_def_s
{
open_file_func zopen_file;
read_file_func zread_file;
write_file_func zwrite_file;
tell_file_func ztell_file;
seek_file_func zseek_file;
close_file_func zclose_file;
testerror_file_func zerror_file;
voidpf opaque;
} zlib_filefunc_def;
void fill_fopen_filefunc OF((zlib_filefunc_def* pzlib_filefunc_def));
#define ZREAD(filefunc,filestream,buf,size) ((*((filefunc).zread_file))((filefunc).opaque,filestream,buf,size))
#define ZWRITE(filefunc,filestream,buf,size) ((*((filefunc).zwrite_file))((filefunc).opaque,filestream,buf,size))
#define ZTELL(filefunc,filestream) ((*((filefunc).ztell_file))((filefunc).opaque,filestream))
#define ZSEEK(filefunc,filestream,pos,mode) ((*((filefunc).zseek_file))((filefunc).opaque,filestream,pos,mode))
#define ZCLOSE(filefunc,filestream) ((*((filefunc).zclose_file))((filefunc).opaque,filestream))
#define ZERROR(filefunc,filestream) ((*((filefunc).zerror_file))((filefunc).opaque,filestream))
#ifdef __cplusplus
}
#endif
#endif
/* ioapi.h -- IO base function header for compress/uncompress .zip
files using zlib + zip or unzip API
Version 1.01e, February 12th, 2005
Copyright (C) 1998-2005 Gilles Vollant
*/
#ifndef _ZLIBIOAPI_H
#define _ZLIBIOAPI_H
#define ZLIB_FILEFUNC_SEEK_CUR (1)
#define ZLIB_FILEFUNC_SEEK_END (2)
#define ZLIB_FILEFUNC_SEEK_SET (0)
#define ZLIB_FILEFUNC_MODE_READ (1)
#define ZLIB_FILEFUNC_MODE_WRITE (2)
#define ZLIB_FILEFUNC_MODE_READWRITEFILTER (3)
#define ZLIB_FILEFUNC_MODE_EXISTING (4)
#define ZLIB_FILEFUNC_MODE_CREATE (8)
#ifndef ZCALLBACK
#if (defined(WIN32) || defined (WINDOWS) || defined (_WINDOWS)) && defined(CALLBACK) && defined (USEWINDOWS_CALLBACK)
#define ZCALLBACK CALLBACK
#else
#define ZCALLBACK
#endif
#endif
#ifdef __cplusplus
extern "C" {
#endif
typedef voidpf (ZCALLBACK *open_file_func) OF((voidpf opaque, const char* filename, int mode));
typedef uLong (ZCALLBACK *read_file_func) OF((voidpf opaque, voidpf stream, void* buf, uLong size));
typedef uLong (ZCALLBACK *write_file_func) OF((voidpf opaque, voidpf stream, const void* buf, uLong size));
typedef long (ZCALLBACK *tell_file_func) OF((voidpf opaque, voidpf stream));
typedef long (ZCALLBACK *seek_file_func) OF((voidpf opaque, voidpf stream, uLong offset, int origin));
typedef int (ZCALLBACK *close_file_func) OF((voidpf opaque, voidpf stream));
typedef int (ZCALLBACK *testerror_file_func) OF((voidpf opaque, voidpf stream));
typedef struct zlib_filefunc_def_s
{
open_file_func zopen_file;
read_file_func zread_file;
write_file_func zwrite_file;
tell_file_func ztell_file;
seek_file_func zseek_file;
close_file_func zclose_file;
testerror_file_func zerror_file;
voidpf opaque;
} zlib_filefunc_def;
void fill_fopen_filefunc OF((zlib_filefunc_def* pzlib_filefunc_def));
#define ZREAD(filefunc,filestream,buf,size) ((*((filefunc).zread_file))((filefunc).opaque,filestream,buf,size))
#define ZWRITE(filefunc,filestream,buf,size) ((*((filefunc).zwrite_file))((filefunc).opaque,filestream,buf,size))
#define ZTELL(filefunc,filestream) ((*((filefunc).ztell_file))((filefunc).opaque,filestream))
#define ZSEEK(filefunc,filestream,pos,mode) ((*((filefunc).zseek_file))((filefunc).opaque,filestream,pos,mode))
#define ZCLOSE(filefunc,filestream) ((*((filefunc).zclose_file))((filefunc).opaque,filestream))
#define ZERROR(filefunc,filestream) ((*((filefunc).zerror_file))((filefunc).opaque,filestream))
#ifdef __cplusplus
}
#endif
#endif
contrib/minizip/iowin32.c
浏览文件 @ 6b8233bf
此差异已折叠。
contrib/minizip/iowin32.h
浏览文件 @ 6b8233bf
/* iowin32.h -- IO base function header for compress/uncompress .zip
files using zlib + zip or unzip API
This IO API version uses the Win32 API (for Microsoft Windows)
Version 1.01, May 8th, 2004
Copyright (C) 1998-2004 Gilles Vollant
*/
#include <windows.h>
#ifdef __cplusplus
extern "C" {
#endif
void fill_win32_filefunc OF((zlib_filefunc_def* pzlib_filefunc_def));
#ifdef __cplusplus
}
#endif
/* iowin32.h -- IO base function header for compress/uncompress .zip
files using zlib + zip or unzip API
This IO API version uses the Win32 API (for Microsoft Windows)
Version 1.01e, February 12th, 2005
Copyright (C) 1998-2005 Gilles Vollant
*/
#include <windows.h>
#ifdef __cplusplus
extern "C" {
#endif
void fill_win32_filefunc OF((zlib_filefunc_def* pzlib_filefunc_def));
#ifdef __cplusplus
}
#endif
contrib/minizip/miniunz.c
浏览文件 @ 6b8233bf
此差异已折叠。
contrib/minizip/minizip.c
浏览文件 @ 6b8233bf
此差异已折叠。
contrib/minizip/mztools.c
浏览文件 @ 6b8233bf
此差异已折叠。
contrib/minizip/mztools.h
浏览文件 @ 6b8233bf
/*
Additional tools for Minizip
Code: Xavier Roche '2004
License: Same as ZLIB (www.gzip.org)
*/
#ifndef _zip_tools_H
#define _zip_tools_H
#ifdef __cplusplus
extern "C" {
#endif
#ifndef _ZLIB_H
#include "zlib.h"
#endif
#include "unzip.h"
/* Repair a ZIP file (missing central directory)
file: file to recover
fileOut: output file after recovery
fileOutTmp: temporary file name used for recovery
*/
extern int ZEXPORT unzRepair(const char* file,
const char* fileOut,
const char* fileOutTmp,
uLong* nRecovered,
uLong* bytesRecovered);
#endif
/*
Additional tools for Minizip
Code: Xavier Roche '2004
License: Same as ZLIB (www.gzip.org)
*/
#ifndef _zip_tools_H
#define _zip_tools_H
#ifdef __cplusplus
extern "C" {
#endif
#ifndef _ZLIB_H
#include "zlib.h"
#endif
#include "unzip.h"
/* Repair a ZIP file (missing central directory)
file: file to recover
fileOut: output file after recovery
fileOutTmp: temporary file name used for recovery
*/
extern int ZEXPORT unzRepair(const char* file,
const char* fileOut,
const char* fileOutTmp,
uLong* nRecovered,
uLong* bytesRecovered);
#endif
contrib/minizip/unzip.c
浏览文件 @ 6b8233bf
此差异已折叠。
contrib/minizip/unzip.h
浏览文件 @ 6b8233bf
此差异已折叠。
contrib/minizip/zip.c
浏览文件 @ 6b8233bf
此差异已折叠。
contrib/minizip/zip.h
浏览文件 @ 6b8233bf
此差异已折叠。
contrib/testzlib/rdtsc64.asm 0 → 100644
浏览文件 @ 6b8233bf
; rdtsc64.asm
;
; unsigned _int64 myrdtsc();
;
; return the performance rdtsc value, on AMD64/Intel EM64T
;
; compile with :
; ml64.exe" /Flrdtsc64 /c /Zi rdtsc64.asm
;
.code
myrdtsc PROC
rdtsc
shl rdx,32
or rax,rdx
ret
myrdtsc ENDP
END
contrib/testzlib/testzlib.c
浏览文件 @ 6b8233bf
此差异已折叠。
contrib/testzlib/testzlib.txt 0 → 100644
浏览文件 @ 6b8233bf
To build testzLib with Visual Studio 2005:
copy to a directory file from :
- root of zLib tree
- contrib/testzlib
- contrib/masmx86
- contrib/masmx64
- contrib/vstudio/vc7
and open testzlib8.sln
\ No newline at end of file
contrib/testzlib/testzlib8.sln 0 → 100644
浏览文件 @ 6b8233bf

Microsoft Visual Studio Solution File, Format Version 9.00
# Visual Studio 2005
Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "testzlib8", "testzlib8.vcproj", "{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}"
EndProject
Global
GlobalSection(SolutionConfigurationPlatforms) = preSolution
Debug|Win32 = Debug|Win32
Debug|Win64 (AMD64) = Debug|Win64 (AMD64)
Release|Win32 = Release|Win32
Release|Win64 (AMD64) = Release|Win64 (AMD64)
ReleaseAsm|Win32 = ReleaseAsm|Win32
ReleaseAsm|Win64 (AMD64) = ReleaseAsm|Win64 (AMD64)
EndGlobalSection
GlobalSection(ProjectConfigurationPlatforms) = postSolution
{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.ActiveCfg = Debug|Win32
{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win32.Build.0 = Debug|Win32
{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win64 (AMD64).ActiveCfg = Debug|Win64 (AMD64)
{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Debug|Win64 (AMD64).Build.0 = Debug|Win64 (AMD64)
{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.ActiveCfg = Release|Win32
{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Win32.Build.0 = Release|Win32
{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Win64 (AMD64).ActiveCfg = Release|Win64 (AMD64)
{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.Release|Win64 (AMD64).Build.0 = Release|Win64 (AMD64)
{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseAsm|Win32.ActiveCfg = ReleaseAsm|Win32
{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseAsm|Win32.Build.0 = ReleaseAsm|Win32
{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseAsm|Win64 (AMD64).ActiveCfg = ReleaseAsm|Win64 (AMD64)
{AA6666AA-E09F-4135-9C0C-4FE50C3C654B}.ReleaseAsm|Win64 (AMD64).Build.0 = ReleaseAsm|Win64 (AMD64)
EndGlobalSection
GlobalSection(SolutionProperties) = preSolution
HideSolutionNode = FALSE
EndGlobalSection
EndGlobal
contrib/testzlib/testzlib8.vcproj 0 → 100644
浏览文件 @ 6b8233bf
此差异已折叠。
contrib/vstudio/vc7/zlib.rc
浏览文件 @ 6b8233bf
......@@ -2,8 +2,8 @@
#define IDR_VERSION1 1
IDR_VERSION1 VERSIONINFO MOVEABLE IMPURE LOADONCALL DISCARDABLE
FILEVERSION 1,2,2,2
PRODUCTVERSION 1,2,2,2
FILEVERSION 1,2,2,3
PRODUCTVERSION 1,2,2,3
FILEFLAGSMASK VS_FFI_FILEFLAGSMASK
FILEFLAGS 0
FILEOS VOS_DOS_WINDOWS32
......@@ -17,7 +17,7 @@ BEGIN
BEGIN
VALUE "FileDescription", "zlib data compression library\0"
VALUE "FileVersion", "1.2.2.2\0"
VALUE "FileVersion", "1.2.2.3\0"
VALUE "InternalName", "zlib\0"
VALUE "OriginalFilename", "zlib.dll\0"
VALUE "ProductName", "ZLib.DLL\0"
......
crc32.c
浏览文件 @ 6b8233bf
/* crc32.c -- compute the CRC-32 of a data stream
* Copyright (C) 1995-2004 Mark Adler
* Copyright (C) 1995-2005 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*
* Thanks to Rodney Brown <rbrown64@csc.com.au> for his contribution of faster
......@@ -273,7 +273,7 @@ local unsigned long crc32_little(crc, buf, len)
len--;
}
buf4 = (const u4 FAR *)buf;
buf4 = (const u4 FAR *)(const void FAR *)buf;
while (len >= 32) {
DOLIT32;
len -= 32;
......@@ -313,7 +313,7 @@ local unsigned long crc32_big(crc, buf, len)
len--;
}
buf4 = (const u4 FAR *)buf;
buf4 = (const u4 FAR *)(const void FAR *)buf;
buf4--;
while (len >= 32) {
DOBIG32;
......
deflate.c
浏览文件 @ 6b8233bf
/* deflate.c -- compress data using the deflation algorithm
* Copyright (C) 1995-2004 Jean-loup Gailly.
* Copyright (C) 1995-2005 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
......@@ -52,7 +52,7 @@
#include "deflate.h"
const char deflate_copyright[] =
" deflate 1.2.2.2 Copyright 1995-2004 Jean-loup Gailly ";
" deflate 1.2.2.3 Copyright 1995-2005 Jean-loup Gailly ";
/*
If you use the zlib library in a product, an acknowledgment is welcome
in the documentation of your product. If for some reason you cannot
......@@ -334,9 +334,7 @@ int ZEXPORT deflateSetDictionary (strm, dictionary, dictLength)
if (length < MIN_MATCH) return Z_OK;
if (length > MAX_DIST(s)) {
length = MAX_DIST(s);
#ifndef USE_DICT_HEAD
dictionary += dictLength - length; /* use the tail of the dictionary */
#endif
}
zmemcpy(s->window, dictionary, length);
s->strstart = length;
......@@ -452,6 +450,25 @@ int ZEXPORT deflateParams(strm, level, strategy)
return err;
}
/* ========================================================================= */
int ZEXPORT deflateTune(strm, good_length, max_lazy, nice_length, max_chain)
z_streamp strm;
int good_length;
int max_lazy;
int nice_length;
int max_chain;
{
deflate_state *s;
if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
s = strm->state;
s->good_match = good_length;
s->max_lazy_match = max_lazy;
s->nice_match = nice_length;
s->max_chain_length = max_chain;
return Z_OK;
}
/* =========================================================================
* For the default windowBits of 15 and memLevel of 8, this function returns
* a close to exact, as well as small, upper bound on the compressed size.
......@@ -986,9 +1003,11 @@ local void lm_init (s)
s->match_length = s->prev_length = MIN_MATCH-1;
s->match_available = 0;
s->ins_h = 0;
#ifndef FASTEST
#ifdef ASMV
match_init(); /* initialize the asm code */
#endif
#endif
}
#ifndef FASTEST
......
examples/README.examples
浏览文件 @ 6b8233bf
......@@ -4,6 +4,13 @@ fitblk.c
compress just enough input to nearly fill a requested output size
- zlib isn't designed to do this, but fitblk does it anyway
gun.c
uncompress a gzip file
- illustrates the use of inflateBack() for high speed file-to-file
decompression using call-back functions
- is approximately twice as fast as gzip -d
- also provides Unix uncompress functionality, again twice as fast
gzappend.c
append to a gzip file
- illustrates the use of the Z_BLOCK flush parameter for inflate()
......@@ -27,3 +34,4 @@ zlib_how.html
zpipe.c
reads and writes zlib streams from stdin to stdout
- illustrates the proper use of deflate() and inflate()
- deeply commented in zlib_how.html (see above)
examples/gun.c 0 → 100644
浏览文件 @ 6b8233bf
此差异已折叠。
examples/zlib_how.html
浏览文件 @ 6b8233bf
......@@ -420,10 +420,11 @@ The output of <tt>inflate()</tt> is handled identically to that of <tt>deflate()
}
</b></pre>
The inner <tt>do</tt>-loop ends when <tt>inflate()</tt> has no more output as indicated
by not filling the output buffer, just as for <tt>deflate()</tt>.
by not filling the output buffer, just as for <tt>deflate()</tt>. In this case, we cannot
assert that <tt>strm.avail_in</tt> will be zero, since the deflate stream may end before the file
does.
<pre><b>
} while (strm.avail_out == 0);
assert(strm.avail_in == 0); /* all input will be used */
</b></pre><!-- -->
The outer <tt>do</tt>-loop ends when <tt>inflate()</tt> reports that it has reached the
end of the input <em>zlib</em> stream, has completed the decompression and integrity
......
examples/zpipe.c
浏览文件 @ 6b8233bf
......@@ -7,6 +7,7 @@
1.1 8 Nov 2004 Add void casting for unused return values
Use switch statement for inflate() return values
1.2 9 Nov 2004 Add assertions to document zlib guarantees
1.3 6 Apr 2005 Remove incorrect assertion in inf()
*/
#include <stdio.h>
......@@ -127,7 +128,6 @@ int inf(FILE *source, FILE *dest)
return Z_ERRNO;
}
} while (strm.avail_out == 0);
assert(strm.avail_in == 0); /* all input will be used */
/* done when inflate() says it's done */
} while (ret != Z_STREAM_END);
......
gzio.c
浏览文件 @ 6b8233bf
此差异已折叠。
inflate.c
浏览文件 @ 6b8233bf
/* inflate.c -- zlib decompression
* Copyright (C) 1995-2004 Mark Adler
* Copyright (C) 1995-2005 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
......@@ -1334,11 +1334,15 @@ z_streamp source;
/* copy state */
zmemcpy(dest, source, sizeof(z_stream));
zmemcpy(copy, state, sizeof(struct inflate_state));
copy->lencode = copy->codes + (state->lencode - state->codes);
copy->distcode = copy->codes + (state->distcode - state->codes);
if (state->lencode >= state->codes &&
state->lencode <= state->codes + ENOUGH - 1)
{
copy->lencode = copy->codes + (state->lencode - state->codes);
copy->distcode = copy->codes + (state->distcode - state->codes);
}
copy->next = copy->codes + (state->next - state->codes);
if (window != Z_NULL)
zmemcpy(window, state->window, 1U << state->wbits);
zmemcpy(window, state->window, (uInt)(1U << state->wbits));
copy->window = window;
dest->state = (voidpf)copy;
return Z_OK;
......
inftrees.c
浏览文件 @ 6b8233bf
/* inftrees.c -- generate Huffman trees for efficient decoding
* Copyright (C) 1995-2004 Mark Adler
* Copyright (C) 1995-2005 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
......@@ -9,7 +9,7 @@
#define MAXBITS 15
const char inflate_copyright[] =
" inflate 1.2.2.2 Copyright 1995-2004 Mark Adler ";
" inflate 1.2.2.3 Copyright 1995-2005 Mark Adler ";
/*
If you use the zlib library in a product, an acknowledgment is welcome
in the documentation of your product. If for some reason you cannot
......@@ -62,7 +62,7 @@ unsigned short FAR *work;
35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
static const unsigned short lext[31] = { /* Length codes 257..285 extra */
16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 72, 199};
19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 66, 71};
static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
......@@ -262,7 +262,7 @@ unsigned short FAR *work;
drop = root;
/* increment past last table */
next += 1U << curr;
next += (unsigned)(1U << curr);
/* determine length of next table */
curr = len - drop;
......
minigzip.c
浏览文件 @ 6b8233bf
/* minigzip.c -- simulate gzip using the zlib compression library
* Copyright (C) 1995-2004 Jean-loup Gailly.
* Copyright (C) 1995-2005 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
......@@ -295,6 +295,8 @@ int main(argc, argv)
break;
argc--, argv++;
}
if (outmode[3] == ' ')
outmode[3] = 0;
if (argc == 0) {
SET_BINARY_MODE(stdin);
SET_BINARY_MODE(stdout);
......
qnx/package.qpg
浏览文件 @ 6b8233bf
此差异已折叠。
win32/zlib1.rc
浏览文件 @ 6b8233bf
此差异已折叠。
zconf.h
浏览文件 @ 6b8233bf
此差异已折叠。
zconf.in.h
浏览文件 @ 6b8233bf
此差异已折叠。
zlib.3
浏览文件 @ 6b8233bf
此差异已折叠。
zlib.h
浏览文件 @ 6b8233bf
此差异已折叠。
zutil.h
浏览文件 @ 6b8233bf
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或