unity_config.h 12.2 KB
Newer Older
T
Toby 已提交
1 2
/* Unity Configuration
 * As of May 11th, 2016 at ThrowTheSwitch/Unity commit 837c529
3
 * Update: December 29th, 2016
T
Toby 已提交
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
 * See Also: Unity/docs/UnityConfigurationGuide.pdf
 *
 * Unity is designed to run on almost anything that is targeted by a C compiler.
 * It would be awesome if this could be done with zero configuration. While
 * there are some targets that come close to this dream, it is sadly not
 * universal. It is likely that you are going to need at least a couple of the
 * configuration options described in this document.
 *
 * All of Unity's configuration options are `#defines`. Most of these are simple
 * definitions. A couple are macros with arguments. They live inside the
 * unity_internals.h header file. We don't necessarily recommend opening that
 * file unless you really need to. That file is proof that a cross-platform
 * library is challenging to build. From a more positive perspective, it is also
 * proof that a great deal of complexity can be centralized primarily to one
 * place in order to provide a more consistent and simple experience elsewhere.
 *
 * Using These Options
 * It doesn't matter if you're using a target-specific compiler and a simulator
 * or a native compiler. In either case, you've got a couple choices for
 * configuring these options:
 *
 *  1. Because these options are specified via C defines, you can pass most of
 *     these options to your compiler through command line compiler flags. Even
 *     if you're using an embedded target that forces you to use their
 *     overbearing IDE for all configuration, there will be a place somewhere in
 *     your project to configure defines for your compiler.
 *  2. You can create a custom `unity_config.h` configuration file (present in
 *     your toolchain's search paths). In this file, you will list definitions
 *     and macros specific to your target. All you must do is define
 *     `UNITY_INCLUDE_CONFIG_H` and Unity will rely on `unity_config.h` for any
 *     further definitions it may need.
 */

#ifndef UNITY_CONFIG_H
#define UNITY_CONFIG_H

/* ************************* AUTOMATIC INTEGER TYPES ***************************
 * C's concept of an integer varies from target to target. The C Standard has
 * rules about the `int` matching the register size of the target
 * microprocessor. It has rules about the `int` and how its size relates to
 * other integer types. An `int` on one target might be 16 bits while on another
 * target it might be 64. There are more specific types in compilers compliant
 * with C99 or later, but that's certainly not every compiler you are likely to
 * encounter. Therefore, Unity has a number of features for helping to adjust
 * itself to match your required integer sizes. It starts off by trying to do it
 * automatically.
 **************************************************************************** */

52 53 54 55 56 57 58 59 60 61
/* The first attempt to guess your types is to check `limits.h`. Some compilers
 * that don't support `stdint.h` could include `limits.h`. If you don't
 * want Unity to check this file, define this to make it skip the inclusion.
 * Unity looks at UINT_MAX & ULONG_MAX, which were available since C89.
 */
/* #define UNITY_EXCLUDE_LIMITS_H */

/* The second thing that Unity does to guess your types is check `stdint.h`.
 * This file defines `UINTPTR_MAX`, since C99, that Unity can make use of to
 * learn about your system. It's possible you don't want it to do this or it's
T
Toby 已提交
62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119
 * possible that your system doesn't support `stdint.h`. If that's the case,
 * you're going to want to define this. That way, Unity will know to skip the
 * inclusion of this file and you won't be left with a compiler error.
 */
/* #define UNITY_EXCLUDE_STDINT_H */

/* ********************** MANUAL INTEGER TYPE DEFINITION ***********************
 * If you've disabled all of the automatic options above, you're going to have
 * to do the configuration yourself. There are just a handful of defines that
 * you are going to specify if you don't like the defaults.
 **************************************************************************** */

 /* Define this to be the number of bits an `int` takes up on your system. The
 * default, if not auto-detected, is 32 bits.
 *
 * Example:
 */
/* #define UNITY_INT_WIDTH 16 */

/* Define this to be the number of bits a `long` takes up on your system. The
 * default, if not autodetected, is 32 bits. This is used to figure out what
 * kind of 64-bit support your system can handle.  Does it need to specify a
 * `long` or a `long long` to get a 64-bit value. On 16-bit systems, this option
 * is going to be ignored.
 *
 * Example:
 */
/* #define UNITY_LONG_WIDTH 16 */

/* Define this to be the number of bits a pointer takes up on your system. The
 * default, if not autodetected, is 32-bits. If you're getting ugly compiler
 * warnings about casting from pointers, this is the one to look at.
 *
 * Example:
 */
/* #define UNITY_POINTER_WIDTH 64 */

/* Unity will automatically include 64-bit support if it auto-detects it, or if
 * your `int`, `long`, or pointer widths are greater than 32-bits. Define this
 * to enable 64-bit support if none of the other options already did it for you.
 * There can be a significant size and speed impact to enabling 64-bit support
 * on small targets, so don't define it if you don't need it.
 */
/* #define UNITY_INCLUDE_64 */


/* *************************** FLOATING POINT TYPES ****************************
 * In the embedded world, it's not uncommon for targets to have no support for
 * floating point operations at all or to have support that is limited to only
 * single precision. We are able to guess integer sizes on the fly because
 * integers are always available in at least one size. Floating point, on the
 * other hand, is sometimes not available at all. Trying to include `float.h` on
 * these platforms would result in an error. This leaves manual configuration as
 * the only option.
 **************************************************************************** */

 /* By default, Unity guesses that you will want single precision floating point
  * support, but not double precision. It's easy to change either of these using
120 121
  * the include and exclude options here. You may include neither, just float,
  * or both, as suits your needs.
T
Toby 已提交
122 123 124 125 126 127 128 129 130 131 132 133
  */
/* #define UNITY_EXCLUDE_FLOAT  */
/* #define UNITY_INCLUDE_DOUBLE */
/* #define UNITY_EXCLUDE_DOUBLE */

/* For features that are enabled, the following floating point options also
 * become available.
 */

/* Unity aims for as small of a footprint as possible and avoids most standard
 * library calls (some embedded platforms don't have a standard library!).
 * Because of this, its routines for printing integer values are minimalist and
134 135 136 137 138 139 140
 * hand-coded. To keep Unity universal, though, we eventually chose to develop
 * our own floating point print routines. Still, the display of floating point
 * values during a failure are optional. By default, Unity will print the
 * actual results of floating point assertion failures. So a failed assertion
 * will produce a message like "Expected 4.0 Was 4.25". If you would like less
 * verbose failure messages for floating point assertions, use this option to
 * give a failure message `"Values Not Within Delta"` and trim the binary size.
T
Toby 已提交
141
 */
142
/* #define UNITY_EXCLUDE_FLOAT_PRINT */
T
Toby 已提交
143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203

/* If enabled, Unity assumes you want your `FLOAT` asserts to compare standard C
 * floats. If your compiler supports a specialty floating point type, you can
 * always override this behavior by using this definition.
 *
 * Example:
 */
/* #define UNITY_FLOAT_TYPE float16_t */

/* If enabled, Unity assumes you want your `DOUBLE` asserts to compare standard
 * C doubles. If you would like to change this, you can specify something else
 * by using this option. For example, defining `UNITY_DOUBLE_TYPE` to `long
 * double` could enable gargantuan floating point types on your 64-bit processor
 * instead of the standard `double`.
 *
 * Example:
 */
/* #define UNITY_DOUBLE_TYPE long double */

/* If you look up `UNITY_ASSERT_EQUAL_FLOAT` and `UNITY_ASSERT_EQUAL_DOUBLE` as
 * documented in the Unity Assertion Guide, you will learn that they are not
 * really asserting that two values are equal but rather that two values are
 * "close enough" to equal. "Close enough" is controlled by these precision
 * configuration options. If you are working with 32-bit floats and/or 64-bit
 * doubles (the normal on most processors), you should have no need to change
 * these options. They are both set to give you approximately 1 significant bit
 * in either direction. The float precision is 0.00001 while the double is
 * 10^-12. For further details on how this works, see the appendix of the Unity
 * Assertion Guide.
 *
 * Example:
 */
/* #define UNITY_FLOAT_PRECISION 0.001f  */
/* #define UNITY_DOUBLE_PRECISION 0.001f */


/* *************************** TOOLSET CUSTOMIZATION ***************************
 * In addition to the options listed above, there are a number of other options
 * which will come in handy to customize Unity's behavior for your specific
 * toolchain. It is possible that you may not need to touch any of these but
 * certain platforms, particularly those running in simulators, may need to jump
 * through extra hoops to operate properly. These macros will help in those
 * situations.
 **************************************************************************** */

/* By default, Unity prints its results to `stdout` as it runs. This works
 * perfectly fine in most situations where you are using a native compiler for
 * testing. It works on some simulators as well so long as they have `stdout`
 * routed back to the command line. There are times, however, where the
 * simulator will lack support for dumping results or you will want to route
 * results elsewhere for other reasons. In these cases, you should define the
 * `UNITY_OUTPUT_CHAR` macro. This macro accepts a single character at a time
 * (as an `int`, since this is the parameter type of the standard C `putchar`
 * function most commonly used). You may replace this with whatever function
 * call you like.
 *
 * Example:
 * Say you are forced to run your test suite on an embedded processor with no
 * `stdout` option. You decide to route your test result output to a custom
 * serial `RS232_putc()` function you wrote like thus:
 */
204 205 206 207 208 209
/* #define UNITY_OUTPUT_CHAR(a)                    RS232_putc(a) */
/* #define UNITY_OUTPUT_CHAR_HEADER_DECLARATION    RS232_putc(int) */
/* #define UNITY_OUTPUT_FLUSH()                    RS232_flush() */
/* #define UNITY_OUTPUT_FLUSH_HEADER_DECLARATION   RS232_flush(void) */
/* #define UNITY_OUTPUT_START()                    RS232_config(115200,1,8,0) */
/* #define UNITY_OUTPUT_COMPLETE()                 RS232_close() */
T
Toby 已提交
210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227

/* For some targets, Unity can make the otherwise required `setUp()` and
 * `tearDown()` functions optional. This is a nice convenience for test writers
 * since `setUp` and `tearDown` don't often actually _do_ anything. If you're
 * using gcc or clang, this option is automatically defined for you. Other
 * compilers can also support this behavior, if they support a C feature called
 * weak functions. A weak function is a function that is compiled into your
 * executable _unless_ a non-weak version of the same function is defined
 * elsewhere. If a non-weak version is found, the weak version is ignored as if
 * it never existed. If your compiler supports this feature, you can let Unity
 * know by defining `UNITY_SUPPORT_WEAK` as the function attributes that would
 * need to be applied to identify a function as weak. If your compiler lacks
 * support for weak functions, you will always need to define `setUp` and
 * `tearDown` functions (though they can be and often will be just empty). The
 * most common options for this feature are:
 */
/* #define UNITY_SUPPORT_WEAK weak */
/* #define UNITY_SUPPORT_WEAK __attribute__((weak)) */
228
/* #define UNITY_NO_WEAK */
T
Toby 已提交
229 230 231 232 233 234 235 236 237 238

/* Some compilers require a custom attribute to be assigned to pointers, like
 * `near` or `far`. In these cases, you can give Unity a safe default for these
 * by defining this option with the attribute you would like.
 *
 * Example:
 */
/* #define UNITY_PTR_ATTRIBUTE __attribute__((far)) */
/* #define UNITY_PTR_ATTRIBUTE near */

239 240 241 242 243 244 245 246
/* Print execution time of each test when executed in verbose mode
 *
 * Example:
 *
 * TEST - PASS (10 ms)
 */
/* #define UNITY_INCLUDE_EXEC_TIME */

T
Toby 已提交
247
#endif /* UNITY_CONFIG_H */