- 04 11月, 2016 2 次提交
-
-
由 Richard Levitte 提交于
The logic around avoiding MULDEF warnings was flawed. Simplifying it makes it better. Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1846)
-
由 Richard Levitte 提交于
Pre 1.1.0, 'make test' would set the environment variable OPENSSL_DEBUG_MEMORY to "on". This got lost when translating the old build files to the new templates. This changes reintroduces that variable. Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1840)
-
- 03 11月, 2016 1 次提交
-
-
由 Richard Levitte 提交于
The Unix and Windows linkers appear to simply ignore if any symbol is defined multiple times in different object files and libraries. The VMS linker, on the other hand, warns about it, loud and clear. It will still create the executable, but does so screaming. So we complicate things by saving the linker output, look through all the errors and warnings, and if they are only made up of %LINK-W-MULDEF, we let it pass, otherwise we output the linker output and raise the same exit code we got from the linker. Reviewed-by: NEmilia Käsper <emilia@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1789)
-
- 21 9月, 2016 1 次提交
-
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 18 9月, 2016 1 次提交
-
-
由 Richard Levitte 提交于
While we're at it, correct the fault in windows-makefile.tmpl Reviewed-by: NAndy Polyakov <appro@openssl.org>
-
- 16 9月, 2016 2 次提交
-
-
由 Richard Levitte 提交于
Reviewed-by: NAndy Polyakov <appro@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NAndy Polyakov <appro@openssl.org>
-
- 15 9月, 2016 1 次提交
-
-
由 Rich Salz 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 09 9月, 2016 1 次提交
-
-
由 Richard Levitte 提交于
This is generalised by having the following macros for stuff that won't be installed: NO_INST_LIB_CFLAGS, used instead of LIB_CFLAGS NO_INST_DSO_CFLAGS, used instead of DSO_CFLAGS NO_INST_BIN_CFLAGS, used instead of BIN_CFLAGS They take values from corresponding target config fields if those are defined, otherwise they take the respective values from LIB_CFLAGS, DSO_CFLAGS and BIN_CFLAGS. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 27 8月, 2016 1 次提交
-
-
由 Richard Levitte 提交于
Because of a perl operator priority mixup, the --openssldir argument wasn't honored. Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 03 8月, 2016 1 次提交
-
-
由 Richard Levitte 提交于
Experience shows that pod2html changes directory during its process without properly adjusting the given source directory. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 02 8月, 2016 1 次提交
-
-
由 Richard Levitte 提交于
Instead, install the new one as openssl.cnf.dist (openssl.cnf-dist on VMS), and only install it as openssl.cnf if that file doesn't already exist. Also, don't install with exec privileges on VMS. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 22 7月, 2016 1 次提交
-
-
由 Richard Levitte 提交于
The way it was implemented before this change, the shared libraries were installed twice. On a file system that supports file generations, that's a waste. Slightly rearranging the install targets solves the problem. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 20 7月, 2016 2 次提交
-
-
由 Richard Levitte 提交于
On non-Windows platforms, shared libraries are both development and runtime files. We only installed them as development files, this makes sure they get installed as runtime files as well. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 19 7月, 2016 2 次提交
-
-
由 Richard Levitte 提交于
This adds a new target 'build_programs' and makes 'build_apps' and 'build_tests' aliases for it, for backward compatibility. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 10 7月, 2016 3 次提交
-
-
由 Richard Levitte 提交于
With OpenSSL 1.1 and on, the engines are tightly tied to the shared library they're to be used with. That makes them depend on the pointer size as well as the shared library version, and this gets reflected in the name of the directory they're installed in. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
This mostly affects 'openssl version -a', which might as well display what we're actually looking at. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 07 7月, 2016 2 次提交
-
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
OpenSSL engines are tied to the OpenSSL shared library versions, starting with OpenSSL 1.1. We therefore need to install them in directories which have the shared library version in it's name, to easily allow multiple OpenSSL versions to be installed at the same time. For VMS, the change is a bit more involved, primarly because the top installation directory was already versioned, *as well as* some of the files inside. That's a bit too much. Version numbering in files is also a bit different on VMS. The engines for shared library version 1.1 will therefore end up in OSSL$INSTROOT:[ENGINES0101.'arch'] ('arch' is the architecture we build for) Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 06 7月, 2016 2 次提交
-
-
由 Richard Levitte 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Richard Levitte 提交于
When creating the library $lib.olb, make sure the extension is there. Otherwise, a logical name with the same name as the file in question will redirect the creation elsewhere. Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 02 7月, 2016 5 次提交
-
-
由 Richard Levitte 提交于
On VMS, it's customary to have a procedure to check that the software was installed correctly and can run as advertised. The procedure added here is fairly simple, it checks that all libraries are in place, that the header crypto.h is in place, and that the command 'openssl version -a' runs without trouble. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
- The install top is versioned by default. However, only the major version should be used. - the default areas for certs, private keys an config files have changed, now all prefixed with 'OSSL$'. This gets reflected in cryptlib.h. - [.VMS]openssl_startup.com.in had some faults regarding creating rooted concealed logical names. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
This makes it possible for script writers to lock on to a specific version if they need to. Note that only the major version number is used. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
Also, have the static library file names contain the pointer size when applicable. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 17 6月, 2016 1 次提交
-
-
由 Richard Levitte 提交于
- User targets are now the same and generally do the same things - configdata.pm depends on exactly the same files on all platforms - VMS production of shared libraries is simplified - VMS automatic dependency files get the extension .D rather than .MMS Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 15 6月, 2016 3 次提交
-
-
由 Richard Levitte 提交于
Just like in the other build file templates Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
As well as properly generating those that are made from .in files. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 24 5月, 2016 3 次提交
-
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 20 5月, 2016 1 次提交
-
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 14 5月, 2016 1 次提交
-
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 10 5月, 2016 2 次提交
-
-
由 Richard Levitte 提交于
Reviewed-by: NAndy Polyakov <appro@openssl.org>
-
由 Richard Levitte 提交于
They were using the wrong variables. Reviewed-by: NAndy Polyakov <appro@openssl.org>
-