Reviewed-by: NRich Salz <rsalz@openssl.org>

The write BIO for handshake messages is bufferred so that we only write
out to the network when we have a complete flight. There was some
complexity in the buffering logic so that we switched buffering on and
off at various points through out the handshake. The only real reason to
do this was historically it complicated the state machine when you wanted
to flush because you had to traverse through the "flush" state (in order
to cope with NBIO). Where we knew up front that there was only going to
be one message in the flight we switched off buffering to avoid that.

In the new state machine there is no longer a need for a flush state so
it is simpler just to have buffering on for the whole handshake. This
also gives us the added benefit that we can simply call flush after every
flight even if it only has one message in it. This means that BIO authors
can implement their own buffering strategies and not have to be aware of
the state of the SSL object (previously they would have to switch off
their own buffering during the handshake because they could not rely on
a flush being received when they really needed to write data out). This
last point addresses GitHub Issue #322.
Reviewed-by: NAndy Polyakov <appro@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>

MR: #2153

This involves providing more session ticket key data, for both the cipher and
the digest
Signed-off-by: NKurt Roeckx <kurt@roeckx.be>
Reviewed-by: NMatt Caswell <matt@openssl.org>

GH: #515, MR: #2153

To allow OCSP stapling to work with libcurl.

Github PR #200
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Per RFC 5246,

    Note: this extension is not meaningful for TLS versions prior to 1.2.
    Clients MUST NOT offer it if they are offering prior versions.
    However, even if clients do offer it, the rules specified in [TLSEXT]
    require servers to ignore extensions they do not understand.

Although second sentence would suggest that there would be no interop
problems in always offering the extension, WebRTC has reported issues
with Bouncy Castle on < TLS 1.2 ClientHellos that still include
signature_algorithms. See also
https://bugs.chromium.org/p/webrtc/issues/detail?id=4223

RT#4390
Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NStephen Henson <steve@openssl.org>

There is a preference for suffixes to indicate that a function is internal
rather than prefixes. Note: the suffix is only required to disambiguate
internal functions and public symbols with the same name (but different
case)
Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

There was a lot of naming inconsistency, so we try and standardise on
one form.
Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

SSL_COMP_free_compression_methods() should not be called expicitly - we
should leave auto-deinit to clean this up instead.
Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

The function pqueue_print is not exported and is never called. Therefore
we should delete it.
Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

Suppress CT callbacks with aNULL or PSK ciphersuites that involve
no certificates.  Ditto when the certificate chain is validated via
DANE-TA(2) or DANE-EE(3) TLSA records.  Also skip SCT processing
when the chain is fails verification.

Move and consolidate CT callbacks from libcrypto to libssl.  We
also simplify the interface to SSL_{,CTX_}_enable_ct() which can
specify either a permissive mode that just collects information or
a strict mode that requires at least one valid SCT or else asks to
abort the connection.

Simplified SCT processing and options in s_client(1) which now has
just a simple pair of "-noct" vs. "-ct" options, the latter enables
the permissive callback so that we can complete the handshake and
report all relevant information.  When printing SCTs, print the
validation status if set and not valid.
Signed-off-by: NRob Percival <robpercival@google.com>
Reviewed-by: NEmilia Käsper <emilia@openssl.org>

We now send the highest supported version by the client, even if the session
uses an older version.

This fixes 2 problems:
- When you try to reuse a session but the other side doesn't reuse it and
  uses a different protocol version the connection will fail.
- When you're trying to reuse a session with an old version you might be
  stuck trying to reuse the old version while both sides support a newer
  version
Signed-off-by: NKurt Roeckx <kurt@roeckx.be>
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

GH: #852, MR: #2452

algo_strength contains 2 parts that need to be checked by their own.
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

MR: #2082

Don't have #error statements in header files, but instead wrap
the contents of that file in #ifndef OPENSSL_NO_xxx
This means it is now always safe to include the header file.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reduces #ifdef complexity.
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

MR: #1824

Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

MR: #1595

Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

MR: #1595

Adjust ssl_set_client_hello_version to get both the minimum and maximum and then
make ssl_set_client_hello_version use the maximum version.
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

MR: #1595

Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

MR: #1595

Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

MR: #1595

Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

* Perform ALPN after the SNI callback; the SSL_CTX may change due to
  that processing
* Add flags to indicate that we actually sent ALPN, to properly error
  out if unexpectedly received.
* clean up ssl3_free() no need to explicitly clear when doing memset
* document ALPN functions
Signed-off-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NEmilia Käsper <emilia@openssl.org>

This capability is required for read pipelining. We will only read in as
many records as will fit in the read buffer (and the network can provide
in one go). The bigger the buffer the more records we can process in
parallel.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Use the new pipeline cipher capability to encrypt multiple records being
written out all in one go. Two new SSL/SSL_CTX parameters can be used to
control how this works: max_pipelines and split_send_fragment.

max_pipelines defines the maximum number of pipelines that can ever be used
in one go for a single connection. It must always be less than or equal to
SSL_MAX_PIPELINES (currently defined to be 32). By default only one
pipeline will be used (i.e. normal non-parallel operation).

split_send_fragment defines how data is split up into pipelines. The number
of pipelines used will be determined by the amount of data provided to the
SSL_write call divided by split_send_fragment. For example if
split_send_fragment is set to 2000 and max_pipelines is 4 then:
SSL_write called with 0-2000 bytes == 1 pipeline used
SSL_write called with 2001-4000 bytes == 2 pipelines used
SSL_write called with 4001-6000 bytes == 3 pipelines used
SSL_write_called with 6001+ bytes == 4 pipelines used

split_send_fragment must always be less than or equal to max_send_fragment.
By default it is set to be equal to max_send_fragment. This will mean that
the same number of records will always be created as would have been
created in the non-parallel case, although the data will be apportioned
differently. In the parallel case data will be spread equally between the
pipelines.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Reviewed-by: NEmilia Käsper <emilia@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

 - Always prefer forward-secure handshakes.
 - Consistently order ECDSA above RSA.
 - Next, always prefer AEADs to non-AEADs, irrespective of strength.
 - Within AEADs, prefer GCM > CHACHA > CCM for a given strength.
 - Prefer TLS v1.2 ciphers to legacy ciphers.
 - Remove rarely used DSS, IDEA, SEED, CAMELLIA, CCM from the default
   list to reduce ClientHello bloat.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Disabled by default, but can be enabled by setting the
ct_validation_callback on a SSL or SSL_CTX.
Reviewed-by: NBen Laurie <ben@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

Implementation experience has shown that the original plan for async wait
fds was too simplistic. Originally the async logic created a pipe internally
and user/engine code could then get access to it via API calls. It is more
flexible if the engine is able to create its own fd and provide it to the
async code.

Another issue is that there can be a lot of churn in the fd value within
the context of (say) a single SSL connection leading to continually adding
and removing fds from (say) epoll. It is better if we can provide some
stability of the fd value across a whole SSL connection. This is
problematic because an engine has no concept of an SSL connection.

This commit refactors things to introduce an ASYNC_WAIT_CTX which acts as a
proxy for an SSL connection down at the engine layer.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

The ssl_set_masks() function no longer depends on the cipher. This
also means there is no need to set the masks for each cipher in
ssl3_choose_cipher.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Add -DBIO_DEBUG to --strict-warnings.
Remove comments about outdated debugging ifdef guards.
Remove md_rand ifdef guarding an assert; it doesn't seem used.
Remove the conf guards in conf_api since we use OPENSSL_assert, not assert.
For pkcs12 stuff put OPENSSL_ in front of the macro name.
Merge TLS_DEBUG into SSL_DEBUG.
Various things just turned on/off asserts, mainly for checking non-NULL
arguments, which is now removed: camellia, bn_ctx, crypto/modes.
Remove some old debug code, that basically just printed things to stderr:
  DEBUG_PRINT_UNKNOWN_CIPHERSUITES, DEBUG_ZLIB, OPENSSL_RI_DEBUG,
  RL_DEBUG, RSA_DEBUG, SCRYPT_DEBUG.
Remove OPENSSL_SSL_DEBUG_BROKEN_PROTOCOL.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Thanks to Viktor for additional review.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Signed-off-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Remove support for static ECDH ciphersuites. They require ECDH keys
in certificates and don't support forward secrecy.
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

Commit 7823d792 added DEFINE_LHASH_OF
to a C source file.  DEFINE_LHASH_OF() and DEFINE_STACK_OF() must
be used only in header files to avoid clang warnings for unused
static-inline functions.
Reviewed-by: NRich Salz <rsalz@openssl.org>