Man, there were a lot of renamings :)
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

There is more to be added, but this will at least tell people how to try.
Reviewed-by: NRich Salz <rsalz@openssl.org>

The old building scripts get removed, they are hopelessly gone in bit
rot by now.

Also remove the old symbol hacks.  They were needed needed to shorten
some names to 31 characters, and to resolve other symbol clashes.
Because we now compile with /NAMES=(AS_IS,SHORTENED), this is no
longer required.
Reviewed-by: NRich Salz <rsalz@openssl.org>

As part of this, change util/mkdef.pl to stop adding libraries to
depend on in its output.  mkdef.pl should ONLY output a symbol
vector.

Because symbol names can't be longer than 31 characters, we use the
compiler to shorten those that are longer down to 23 characters plus
an 8 character CRC.  To make sure users of our header files will pick
up on that automatically, add the DEC C supported extra headers files
__decc_include_prologue.h and __decc_include_epilogue.h.

Furthermore, we add a config.com, so VMS people can configure just as
comfortably as any Unix folks, thusly:

    @config
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

This commit SHALL be reverted before final release.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Cygwin and Mingw name their libraries a bit differently from the rest
of the POSIXly universe, we need to adapt to that.

In Makefile.tmpl, it means that some hunks will only be output
conditionally.

This also means that shared_extension for the Cygwin and Mingw
configurations in Configurations/10-main.conf are changing from .dll.a
to .dll.  Makefile.shared does a fine job without having them
specified, and it's much easier to work with tucking an extra .a at
the end of files in the installation recipes than any amount of name
rewrites, especially with the support of the SHARED_NAME in the top
build.info.
Reviewed-by: NRich Salz <rsalz@openssl.org>

This also adds all the raw sections needed for some files.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Under certain conditions, one might not want to output certain
sections of a template file.  This adds the functions output_off() and
output_on(), reachable inside the templates.  And example usage in a
Makefile template could be this:

	@ : {- output_off() if $config{no_shared}; "" -}
	... lines dealing with shared libraries
	@ : {- output_on() -}
Reviewed-by: NRich Salz <rsalz@openssl.org>

The logic to figure out the combinations of --prefix and --openssldir
has stayed in Configure so far, with Unix paths as defaults.

However, since we're making Configure increasingly platform agnostic,
these defaults need to change and adapt to the platform, along with
the logic to combine them.

The easiest to provide for this is to move the logic and the defaults
away from Configure and into the build files.

This also means that the definition of the macros ENGINESDIR and
OPENSSLDIR move away from include/openssl/opensslconf.h and into the
build files.

Makefile.in is adapted accordingly.
Reviewed-by: NRich Salz <rsalz@openssl.org>

With some compilers, C macros are defined differently on the command
line than on Unix.  It could be that the flad to define them isn't -D,
it could also be that they need to be grouped together and not be mixed
in with the other compiler flags (that's how it's done on VMS, for
example).

On Unix family platform configurations, we can continue to have macro
definitions mixed in with the rest of the flags, so the changes in
Configurations/*.conf are kept to an absolute minimum.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Remoce DYANMIC once-init stuff.
After the library is stopped, you can't restart it.
Reviewed-by: NMatt Caswell <matt@openssl.org>

Rebased and merged by me, with Ben's approval.
Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NBen Laurie <ben@openssl.org>

If you call an explicit deinit when we've not been inited then a seg
fault can occur. We should check that we've been inited before attempting
to deinit.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

It seems like it gives back gibberish.  If we asked for a numeric
service, it's easy to check for a digit in the first position, and
if there isn't any, rewrite it using older methods.
Reviewed-by: NRich Salz <rsalz@openssl.org>

In build.info files, make the include directory in the build directory
absolute, or Configure will think it should be added to the source
directory top.  Configure will turn it into a relative path if
possible.
Reviewed-by: NRich Salz <rsalz@openssl.org>

There were cases where some input was absolute, and concatenating it
to the diretory to the source or build top could fail spectacularly.
Let's check the input first to see if it's absolute.

And while we're on the subject of checking if a file or dir spec is
absolute using file_name_is_absolute() has its own quirks on VMS,
where a logical name is considered absolute under most circumstances.
This is perfectly correct from a VMS point of view, but when parsing
the build.info files, we want single word file or directory names to
only be checked syntactically.  A function isabsolute() that does the
right thing is the solution.
Reviewed-by: NRich Salz <rsalz@openssl.org>

memset() is used by CRYPTO_secure_zalloc(), which isn't hidden away
behind IMPLEMENTED.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

This also closes RT 4123
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Make some global variables that are only ever accessed from one file
static.
Reviewed-by: NRich Salz <rsalz@openssl.org>

After the final use of the thread_local_inits_st we should ensure it is
set to NULL, just in case OPENSSL_INIT_thread_stop gets called again and
it tries to use garbage.
Reviewed-by: NRich Salz <rsalz@openssl.org>

With the new init framework resources aren't released until the process
exits. This means checking for mem leaks before that point finds a lot of
things! We should explicitly close down the library if we're checking for
mem leaks.
Reviewed-by: NRich Salz <rsalz@openssl.org>

version32.rc was not created on Windows. The if condition has been corrected.
Signed-off-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NTim Hudson <tjh@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>

Reviewed-by: NTim Hudson <tjh@openssl.org>

Reviewed-by: NTim Hudson <tjh@openssl.org>

Reviewed-by: NKurt Roeckx <kurt@openssl.org>
Signed-off-by: NRich Salz <rsalz@openssl.org>

    * added missing help option messages
    * ecdh_single option is removed as it is a no-op and not an option
    supported in earlier versions
    * ssl_ctx_security_debug() was invoked before ctx check for NULL
    * trusted_first option can be removed, as it is always enabled in 1.1.
    But not removed the option, require confirmation.
Signed-off-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>

Fixes for the auto-init/deinit code based on review comments
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

The newly added internal async.h header file had last years date in it.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Various Makefile.in files have changes for auto-init/de-init. Make the
equivalent changes in build.info.
Reviewed-by: NRichard Levitte <levitte@openssl.org>