Introduce KDF_F_PKEY_HKDF_DERIVE and return the KDF_R_MISSING_PARAMETER
error code when required parameters have not been set. This will make
"openssl pkeyutl -kdf HKDF" return a meaningful error message instead of
simply "Public Key operation error".
Reviewed-by: NPaul Dale <paul.dale@oracle.com>
Reviewed-by: NStephen Henson <steve@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3989)

This is achieved mostly by ~10% reduction of amount of instructions
per round thanks to a) switch to KECCAK_2X variant; b) merge of
almost 1/2 rotations with logical instructions. Performance is
improved on all observed processors except on Cortex-A15. This is
because it's capable of exploiting more parallelism and can execute
original code for same amount of time.
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NBernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/4057)

Removing the use of SETUP_TEST_FIXTURE reduces complxity in those tests that
used it.
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NAndy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4066)

The OID for {1 3 6 1 5 5 8 1 2} HMAC-SHA1 (NID_hmac_sha1) is explicitly
referenced by RFC 2510, RFC 3370, and RFC 4210. This is essential for the
common implementations of CMP (Certificate Managing Protocol, RFC4210).

HMAC-MD5's OID {1 3 6 1 5 5 8 1 1} (NID_hmac_md5) is in the same branch and
it seems to generally exist (-> Internet search), but it is unclear where it is
actually defined as it appears not to be referenced by RFCs and practically
rather unused.

Those OIDs are both duplicates to OIDs from an RSA OID branch, which are already
included in builtin_pbe[]:

HMAC-SHA1 also has another OID defined in PKCS#5/RFC2898 (NID_hmacWithSHA1).

It is also unclear where the other OID for HMAC-MD5 (NID_hmacWithMD5) from the
RSA branch is officially specified, as only HMAC-SHA1 from PKCS#5 was found to be
defined. Anyway, HMAC-MD5 likely only plays a neglectable role in the future.
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NPaul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/3811)

Simplify the only test that uses this macro so it doesn't need it anymore.
Clean up the formatting a little.
Reviewed-by: NAndy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4034)

"More" refers to the fact that we make active BIT_INTERLEAVE choice
in some specific cases. Update commentary correspondingly.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Even though tm->length >= 15 && v[14] == '.' works in practice,
[because "YYYYMMDDHHMMSS." would be rejected as invalid by
asn1_time_to_tm,] formal correctness with respect to buffer
overstep in few lines vicinity improves readability.

[Also fold one if condition and improve expression readability.]
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4058)

Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NAndy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4061)

Seems this documentation is not dead, so add this missing part
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NAndy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4037)

Document that the RSA_get0_ functions permit a NULL BIGNUM **. Those output parameters are ignored.
Reviewed-by: NPaul Dale <paul.dale@oracle.com>
Reviewed-by: NMatt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4064)

In TLSv1.3 we can resume, but still get a new session. This adds a test to
make sure that is happening.
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NBen Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4068)

If a new_session_cb is set then it was only ever getting invoked if !s->hit
is true. This is sensible for <=TLSv1.2 but does not work for TLSv1.3.

Fixes #4045
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NBen Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4068)

This is to address issue #3932. Support comma-separated string
to specify what extensions to be displayed.
Reviewed-by: NPaul Dale <paul.dale@oracle.com>
Reviewed-by: NAndy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4016)

Remove redundant variable

[to be squashed]

I scanned all files in the doc folder with a spell checker (https://github.com/EWSoftware/VSSpellChecker).
This patch (hopefully) corrected all spell errors that it found.
Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NPaul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/4065)

The memory blocks contain secret data and must be
cleared before returning to the system heap.
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4062)

Some extensions were being displayed twice, before they were parsed, and
again after they were parsed.
The supported_versions extension was not being fully displayed, as it
was processed differently than other extensions.

Move the debug callback to where the extensions are first collected, to
catch all the extensions as they come in, so they are ordered correctly.
Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3911)

The names of these ciphers have an "SSL_" prefix, but the RFC names use
"TLS_":
https://www.iana.org/assignments/tls-parameters/tls-parameters.xhtml#tls-parameters-4

This dates back to these ciphers being originally defined in SSLv3. As
SSLv3 is on its way out anyway and this is a new set of APIs,
consistently use the TLS names.
Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4007)

TLS_ST_SR_NEXT_PROTO means "SSLv3/TLS read next proto"
Fix typo in the message for TLS_ST_SW_CERT_STATUS
Reviewed-by: NAndy Polyakov <appro@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4054)

I think it's better to use `GetFileAttributes` to obtain the attributes
of a file than `FindFirstFile`. If the input name contains `*`, this
function should return failure rather than check whether the first match
happens to be a file or a directory.
Reviewed-by: NAndy Polyakov <appro@openssl.org>
Reviewed-by: NBernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/3991)

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

[And move misplaced macros.]
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4056)

Check time string format before parsing
Reduce more duplicated code
By involving asn1_time_to_tm, we can now get information we mostly need
to print a time string.

This follows what was discussed at
https://github.com/openssl/openssl/pull/4001#discussion_r129092251Reviewed-by: NPaul Dale <paul.dale@oracle.com>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4039)

Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4053)

Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4052)

To state the fractional seconds part will be lost in the conversion.
Reviewed-by: NAndy Polyakov <appro@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4041)

Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4049)

Remove the function prototypes for ssl_cert_get0_next_certificate, ssl_set_default_md, tls1_shared_list,
dtls1_send_newsession_ticket, tls1_ctrl, and tls1_callback_ctrl, all of which are not defined.

It also changed the signature of the function pqueue_next to `pitem *pqueue_next(piterator *item)` in
pqueue.c, making it match the prototype in ssl_locl.h. (`piterator *` is equivalent to `pitem **`.)
Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4049)

This patch removes the prototype of function RECORD_LAYER_set_write_sequence from record_locl.h, since this function is not defined.
Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4051)

Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4015)

Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4015)

Add functions to enumerate public key methods. Add test to ensure table
is in the correct order.
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4015)

Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4044)

Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4044)

Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4044)

Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4044)

Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4044)

Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4044)

Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4047)