Use "parse" and "add" for function and callback names instead of
"first" and "second".

Change arguments to callback so the extension type is unsigned int
and the buffer length is size_t. Note: this *will* break existing code.
Reviewed-by: NEmilia Käsper <emilia@openssl.org>

Since sanity checks are performed for all custom extensions the
serverinfo checks are no longer needed.
Reviewed-by: NEmilia Käsper <emilia@openssl.org>

Reject attempts to use extensions handled internally.

Add flags to each extension structure to indicate if an extension
has been sent or received. Enforce RFC5246 compliance by rejecting
duplicate extensions and unsolicited extensions and only send a
server extension if we have sent the corresponding client extension.
Reviewed-by: NEmilia Käsper <emilia@openssl.org>

Use the same structure for client and server custom extensions.

Add utility functions in new file t1_ext.c.
Use new utility functions to handle custom server and client extensions
and remove a lot of code duplication.
Reviewed-by: NEmilia Käsper <emilia@openssl.org>

Pull constant-time methods out to a separate header, add tests.
Reviewed-by: NBodo Moeller <bodo@openssl.org>

Use existing error code SSL_R_RECORD_TOO_SMALL for too many empty records.

For ease of backporting the patch to release branches.
Reviewed-by: NBodo Moeller <bodo@openssl.org>

Don't need to check auth for NULL since we did when we
assigned to it.
Reviewed-by: NEmilia Kasper <emilia@openssl.org>

Extra SSL_get_selected_srtp_profile() declaration in ssl/srtp.h
causes -Werror builds to fail.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Add a dozen more const declarations where appropriate.
These are from Justin; while adding his patch, I noticed
ASN1_BIT_STRING_check could be fixed, too.
Reviewed-by: NDr. Stephen Henson <steve@openssl.org>

While RFC6367 focuses on Camellia-GCM cipher suites, it also adds a few
cipher suites that use SHA-2 based HMAC that can be very easily
added.

Tested against gnutls 3.3.5

PR#3443
Reviewed-by: NTim Hudson <tjh@openssl.org>

PR#3450
Reviewed-by: NEmilia Käsper <emilia@openssl.org>

Remove some redundant logical expressions
Reviewed-by: NEmilia Kasper <emilia@silkandcyanide.net>

Move custom extension structures from SSL_CTX to CERT structure.

This change means the form can be revised in future without binary
compatibility issues. Also since CERT is part of SSL structures
so per-SSL custom extensions could be supported in future as well as
per SSL_CTX.
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NEmilia Käsper <emilia@openssl.org>

Reviewed-by: NEmilia Käsper <emilia@openssl.org>

Reviewed-by: NDr. Stephen Henson <steve@openssl.org>

The addition of SRP authentication needs to be checked in various places
to work properly. Specifically:

A certificate is not sent.
A certificate request must not be sent.
Server key exchange message must not contain a signature.
If appropriate SRP authentication ciphersuites should be chosen.
Reviewed-by: NMatt Caswell <matt@openssl.org>

The "unsigned char *d" should be const.
Reviewed-by: NKurt Roeckx <kurt@roeckx.be>

Use SSL3_AL_FATAL instead of the literal constant "2"
Every bit of cleanup helps.
Reviewed-by: NMatt Caswell <matt@openssl.org>

Check SRP parameters when they are received so we can send back an
appropriate alert.
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

If a client attempted to use an SRP ciphersuite and it had not been
set up correctly it would crash with a null pointer read. A malicious
server could exploit this in a DoS attack.

Thanks to Joonas Kuorilehto and Riku Hietamäki from Codenomicon
for reporting this issue.

CVE-2014-2970
Reviewed-by: NTim Hudson <tjh@openssl.org>

CVE-2014-3509
Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NDr. Stephen Henson <steve@openssl.org>

CVE-2014-3510
Reviewed-by: NDr. Stephen Henson <steve@openssl.org>

CVE-2014-3511
Reviewed-by: NEmilia Käsper <emilia@openssl.org>
Reviewed-by: NBodo Möller <bodo@openssl.org>

In a couple of functions, a sequence number would be calculated twice.

Additionally, in |dtls1_process_out_of_seq_message|, we know that
|frag_len| <= |msg_hdr->msg_len| so the later tests for |frag_len <
msg_hdr->msg_len| can be more clearly written as |frag_len !=
msg_hdr->msg_len|, since that's the only remaining case.
Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NEmilia Käsper <emilia@openssl.org>

Applying same fix as in dtls1_process_out_of_seq_message. A truncated DTLS fragment would cause *ok to be clear, but the return value would still be the number of bytes read.

Problem identified by Emilia Käsper, based on previous issue/patch by Adam
Langley.
Reviewed-by: NEmilia Käsper <emilia@openssl.org>

Previously, a truncated DTLS fragment in
|dtls1_process_out_of_seq_message| would cause *ok to be cleared, but
the return value would still be the number of bytes read. This would
cause |dtls1_get_message| not to consider it an error and it would
continue processing as normal until the calling function noticed that
*ok was zero.

I can't see an exploit here because |dtls1_get_message| uses
|s->init_num| as the length, which will always be zero from what I can
see.
Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NEmilia Käsper <emilia@openssl.org>

The |pqueue_insert| function can fail if one attempts to insert a
duplicate sequence number. When handling a fragment of an out of
sequence message, |dtls1_process_out_of_seq_message| would not call
|dtls1_reassemble_fragment| if the fragment's length was zero. It would
then allocate a fresh fragment and attempt to insert it, but ignore the
return value, leaking the fragment.

This allows an attacker to exhaust the memory of a DTLS peer.

Fixes CVE-2014-3507
Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NEmilia Käsper <emilia@openssl.org>

In |dtls1_reassemble_fragment|, the value of
|msg_hdr->frag_off+frag_len| was being checked against the maximum
handshake message size, but then |msg_len| bytes were allocated for the
fragment buffer. This means that so long as the fragment was within the
allowed size, the pending handshake message could consume 16MB + 2MB
(for the reassembly bitmap). Approx 10 outstanding handshake messages
are allowed, meaning that an attacker could consume ~180MB per DTLS
connection.

In the non-fragmented path (in |dtls1_process_out_of_seq_message|), no
check was applied.

Fixes CVE-2014-3506

Wholly based on patch by Adam Langley with one minor amendment.
Reviewed-by: NEmilia Käsper <emilia@openssl.org>

Reviewed-by: NEmilia Käsper <emilia@openssl.org>

The |item| variable, in both of these cases, may contain a pointer to a
|pitem| structure within |s->d1->buffered_messages|. It was being freed
in the error case while still being in |buffered_messages|. When the
error later caused the |SSL*| to be destroyed, the item would be double
freed.

Thanks to Wah-Teh Chang for spotting that the fix in 1632ef74 was
inconsistent with the other error paths (but correct).

Fixes CVE-2014-3505
Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NEmilia Käsper <emilia@openssl.org>

Don't call internal functions directly call them through
SSL_test_functions(). This also makes unit testing work on
Windows and platforms that don't export internal functions
from shared libraries.

By default unit testing is not enabled: it requires the compile
time option "enable-unit-test".
Reviewed-by: NGeoff Thorpe <geoff@openssl.org>

ssl/ssl_locl.h now comes first to ensure that it will compile standalone.
test/testutil.h is considered to be in the same directory as the test file,
since the test file will be linked into test/ and built there.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Reviewed-by: NTim Hudson <tjh@openssl.org>

Use same logic when determining when to expect a client
certificate for both TLS and DTLS.

PR#3452

PR#3440

PR: #3424,#3423,#3422

PR#319 (reoponed version).