- 04 3月, 2016 1 次提交
-
-
由 Rich Salz 提交于
Change the ECC default curve list to be this, in order: x25519, secp256r1, secp521r1, secp384r1, brainpoolP256r1, brainpoolP384r1, and brainpool512r1. Reviewed-by: NEmilia Käsper <emilia@openssl.org>
-
- 03 3月, 2016 1 次提交
-
-
由 Emilia Kasper 提交于
1) Simplify code with better PACKET methods. 2) Make broken SNI parsing explicit. SNI was intended to be extensible to new name types but RFC 4366 defined the syntax inextensibly, and OpenSSL has never parsed SNI in a way that would allow adding a new name type. RFC 6066 fixed the definition but due to broken implementations being widespread, it appears impossible to ever extend SNI. 3) Annotate resumption behaviour. OpenSSL doesn't currently handle all extensions correctly upon resumption. Annotate for further clean-up. 4) Send an alert on ALPN protocol mismatch. Reviewed-by: NKurt Roeckx <kurt@openssl.org>
-
- 29 2月, 2016 1 次提交
-
-
由 Dr. Stephen Henson 提交于
Add X25519 to TLS supported curve list. Reject attempts to configure keys which cannot be used for signing. Reviewed-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NEmilia Käsper <emilia@openssl.org>
-
- 20 2月, 2016 1 次提交
-
-
由 Emilia Kasper 提交于
Adapted from BoringSSL. Added a test. The extension parsing code is already attempting to already handle this for some individual extensions, but it is doing so inconsistently. Duplicate efforts in individual extension parsing will be cleaned up in a follow-up. Reviewed-by: NStephen Henson <steve@openssl.org>
-
- 19 2月, 2016 1 次提交
-
-
由 Rich Salz 提交于
Add -DBIO_DEBUG to --strict-warnings. Remove comments about outdated debugging ifdef guards. Remove md_rand ifdef guarding an assert; it doesn't seem used. Remove the conf guards in conf_api since we use OPENSSL_assert, not assert. For pkcs12 stuff put OPENSSL_ in front of the macro name. Merge TLS_DEBUG into SSL_DEBUG. Various things just turned on/off asserts, mainly for checking non-NULL arguments, which is now removed: camellia, bn_ctx, crypto/modes. Remove some old debug code, that basically just printed things to stderr: DEBUG_PRINT_UNKNOWN_CIPHERSUITES, DEBUG_ZLIB, OPENSSL_RI_DEBUG, RL_DEBUG, RSA_DEBUG, SCRYPT_DEBUG. Remove OPENSSL_SSL_DEBUG_BROKEN_PROTOCOL. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 18 2月, 2016 1 次提交
-
-
由 Matt Caswell 提交于
Certain code paths in tls_decrypt_ticket could return early without first freeing the HMAC_CTX or the EVP_CIPHER_CTX. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 16 2月, 2016 3 次提交
-
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 12 2月, 2016 3 次提交
-
-
由 Dr. Stephen Henson 提交于
Remove support for static ECDH ciphersuites. They require ECDH keys in certificates and don't support forward secrecy. Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Rich Salz 提交于
To enable heartbeats for DTLS, configure with enable-heartbeats. Heartbeats for TLS have been completely removed. This addresses RT 3647 Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 01 2月, 2016 1 次提交
-
-
由 Emilia Kasper 提交于
PACKET contents should be read-only. To achieve this, also - constify two user callbacks - constify BUF_reverse. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 27 1月, 2016 1 次提交
-
-
由 Rich Salz 提交于
This was done by the following find . -name '*.[ch]' | /tmp/pl where /tmp/pl is the following three-line script: print unless $. == 1 && m@/\* .*\.[ch] \*/@; close ARGV if eof; # Close file to reset $. And then some hand-editing of other files. Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
- 20 1月, 2016 1 次提交
-
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 12 1月, 2016 1 次提交
-
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 08 1月, 2016 1 次提交
-
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 02 1月, 2016 1 次提交
-
-
由 Viktor Dukhovni 提交于
The protocol selection code is now consolidated in a few consecutive short functions in a single file and is table driven. Protocol-specific constraints that influence negotiation are moved into the flags field of the method structure. The same protocol version constraints are now applied in all code paths. It is now much easier to add new protocol versions without reworking the protocol selection logic. In the presence of "holes" in the list of enabled client protocols we no longer select client protocols below the hole based on a subset of the constraints and then fail shortly after when it is found that these don't meet the remaining constraints (suiteb, FIPS, security level, ...). Ideally, with the new min/max controls users will be less likely to create "holes" in the first place. Reviewed-by: NKurt Roeckx <kurt@openssl.org>
-
- 01 1月, 2016 1 次提交
-
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 30 12月, 2015 1 次提交
-
-
由 Dr. Stephen Henson 提交于
If DSA parameters are absent return -1 (for unknown) in DSA_security_bits. If parameters are absent when a certificate is set in an SSL/SSL_CTX structure this will reject the certificate by default. This will cause DSA certificates which omit parameters to be rejected but that is never (?) done in practice. Thanks to Brian 'geeknik' Carpenter for reporting this issue. Reviewed-by: NEmilia Käsper <emilia@openssl.org>
-
- 28 12月, 2015 3 次提交
-
-
由 Matt Caswell 提交于
Move all calls of the OCSP callback into one place, rather than repeating it in two different places. Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
由 Matt Caswell 提交于
It makes no sense to call the OCSP status callback if we are resuming a session because no certificates will be sent. Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
由 Matt Caswell 提交于
If a server sends the status_request extension then it may choose to send the CertificateStatus message. However this is optional. We were treating it as mandatory and the connection was failing. Thanks to BoringSSL for reporting this issue. RT#4120 Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
- 20 12月, 2015 1 次提交
-
-
由 Dr. Stephen Henson 提交于
Remove all fixed DH ciphersuites and associated logic. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 17 12月, 2015 1 次提交
-
-
由 Rich Salz 提交于
Rename BUF_{strdup,strlcat,strlcpy,memdup,strndup,strnlen} to OPENSSL_{strdup,strlcat,strlcpy,memdup,strndup,strnlen} Add #define's for the old names. Add CRYPTO_{memdup,strndup}, called by OPENSSL_{memdup,strndup} macros. Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 10 12月, 2015 1 次提交
-
-
由 Matt Caswell 提交于
If the call to OBJ_find_sigid_by_algs fails to find the relevant NID then we should set the NID to NID_undef. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 09 12月, 2015 1 次提交
-
-
由 Dr. Stephen Henson 提交于
Add new flag TLS1_FLAGS_RECEIVED_EXTMS which is set when the peer sends the extended master secret extension. Server now sends extms if and only if the client sent extms. Check consistency of extms extension when resuming sessions following (where practical) RFC7627. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 08 12月, 2015 2 次提交
-
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
This change required some special treatment, as HMAC is intertwined with EVP_MD. For now, all local HMAC_CTX variables MUST be initialised with HMAC_CTX_EMPTY, or whatever happens to be on the stack will be mistaken for actual pointers to EVP_MD_CTX. This will change as soon as HMAC_CTX becomes opaque. Also, since HMAC_CTX_init() can fail now, its return type changes from void to int, and it will return 0 on failure, 1 on success. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 05 12月, 2015 3 次提交
-
-
由 Kurt Roeckx 提交于
Reviewed-by: NDr. Stephen Henson <steve@openssl.org>
-
由 Kurt Roeckx 提交于
SSL_{CTX}_set_tmp_ecdh() allows to set 1 EC curve and then tries to use it. On the other hand SSL_{CTX_}set1_curves() allows you to set a list of curves, but only when SSL_{CTX_}set_ecdh_auto() was called to turn it on. Reviewed-by: NDr. Stephen Henson <steve@openssl.org>
-
由 Kurt Roeckx 提交于
This only gets used to set a specific curve without actually checking that the peer supports it or not and can therefor result in handshake failures that can be avoided by selecting a different cipher. Reviewed-by: NDr. Stephen Henson <steve@openssl.org>
-
- 30 11月, 2015 3 次提交
-
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
由 Dr. Stephen Henson 提交于
Don't hard code EVP_sha* etc for signature algorithms: use table indices instead. Add SHA224 and SHA512 to tables. Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
- 26 11月, 2015 1 次提交
-
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NAndy Polyakov <appro@openssl.org>
-
- 25 11月, 2015 2 次提交
-
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 24 11月, 2015 1 次提交
-
-
由 Dmitry Belyavsky 提交于
This patch contains the necessary changes to provide GOST 2012 ciphersuites in TLS. It requires the use of an external GOST 2012 engine. Reviewed-by: NMatt Caswell <matt@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 20 11月, 2015 1 次提交
-
-
由 Matt Caswell 提交于
There are lots of calls to EVP functions from within libssl There were various places where we should probably check the return value but don't. This adds these checks. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-