A previous commit added the SSL_has_pending() function which provides a
method for knowing whether OpenSSL has buffered, but as yet unprocessed
record data.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Add some documentation for all of the SSL/SSL_CTX functions/ctrls for
conrolling read and write pipelining.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Fix an erroenous fall through when setting the max_pipelines value.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Previously s_client and s_server relied on using SSL_pending() which does
not take into account read_ahead. For read pipelining to work, read_ahead
gets set automatically. Therefore s_client and s_server have been
converted to use SSL_has_pending() instead.
Reviewed-by: NTim Hudson <tjh@openssl.org>

This is similar to SSL_pending() but just returns a 1 if there is data
pending in the internal OpenSSL buffers or 0 otherwise (as opposed to
SSL_pending() which returns the number of bytes available). Unlike
SSL_pending() this will work even if "read_ahead" is set (which is the
case if you are using read pipelining, or if you are doing DTLS). A 1
return value means that we have unprocessed data. It does *not* necessarily
indicate that there will be application data returned from a call to
SSL_read(). The unprocessed data may not be application data or there
could be errors when we attempt to parse the records.
Reviewed-by: NTim Hudson <tjh@openssl.org>

This capability is required for read pipelining. We will only read in as
many records as will fit in the read buffer (and the network can provide
in one go). The bigger the buffer the more records we can process in
parallel.
Reviewed-by: NTim Hudson <tjh@openssl.org>

With read pipelining we use multiple SSL3_RECORD structures for reading.
There are SSL_MAX_PIPELINES (32) of them defined (typically not all of these
would be used). Each one has a 16k compression buffer allocated! This
results in a significant amount of memory being consumed which, most of the
time, is not needed.  This change swaps the allocation of the compression
buffer to be lazy so that it is only done immediately before it is actually
used.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Read pipelining is controlled in a slightly different way than with write
pipelining. While reading we are constrained by the number of records that
the peer (and the network) can provide to us in one go. The more records
we can get in one go the more opportunity we have to parallelise the
processing.

There are two parameters that affect this:
* The number of pipelines that we are willing to process in one go. This is
controlled by max_pipelines (as for write pipelining)
* The size of our read buffer. A subsequent commit will provide an API for
adjusting the size of the buffer.

Another requirement for this to work is that "read_ahead" must be set. The
read_ahead parameter will attempt to read as much data into our read buffer
as the network can provide. Without this set, data is read into the read
buffer on demand. Setting the max_pipelines parameter to a value greater
than 1 will automatically also turn read_ahead on.

Finally, the read pipelining as currently implemented will only parallelise
the processing of application data records. This would only make a
difference for renegotiation so is unlikely to have a significant impact.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Add dummy pipline support to dasync for the aes128_cbc_hmac_sha1 cipher.
This is treated as an AEAD cipher.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Add the options min_send_frag and max_pipelines to s_server and s_client
in order to control pipelining capabilities. This will only have an effect
if a pipeline capable cipher is used (such as the one provided by the
dasync engine).
Reviewed-by: NTim Hudson <tjh@openssl.org>

Use the new pipeline cipher capability to encrypt multiple records being
written out all in one go. Two new SSL/SSL_CTX parameters can be used to
control how this works: max_pipelines and split_send_fragment.

max_pipelines defines the maximum number of pipelines that can ever be used
in one go for a single connection. It must always be less than or equal to
SSL_MAX_PIPELINES (currently defined to be 32). By default only one
pipeline will be used (i.e. normal non-parallel operation).

split_send_fragment defines how data is split up into pipelines. The number
of pipelines used will be determined by the amount of data provided to the
SSL_write call divided by split_send_fragment. For example if
split_send_fragment is set to 2000 and max_pipelines is 4 then:
SSL_write called with 0-2000 bytes == 1 pipeline used
SSL_write called with 2001-4000 bytes == 2 pipelines used
SSL_write called with 4001-6000 bytes == 3 pipelines used
SSL_write_called with 6001+ bytes == 4 pipelines used

split_send_fragment must always be less than or equal to max_send_fragment.
By default it is set to be equal to max_send_fragment. This will mean that
the same number of records will always be created as would have been
created in the non-parallel case, although the data will be apportioned
differently. In the parallel case data will be spread equally between the
pipelines.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Implement aes128-cbc as a pipeline capable cipher in the dasync engine.
As dasync is just a dummy engine, it actually just performs the parallel
encrypts/decrypts in serial.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Add a flag to indicate that a cipher is capable of performing
"pipelining", i.e. multiple encrypts/decrypts in parallel. Also add some
new ctrls that ciphers will need to implement if they are pipeline capable.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

- Only build & test two configurations. Make all the
  other build variants buildonly on gcc (clang on osx).
- Don't build with default clang at all on linux.
- Only use gcc-5 and clang-3.6 for the sanitizer builds. Re-running
  e.g. CONFIG_OPTS="shared" with them seems redundant.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

This reverts commit 963bb621.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Strictly speaking, it isn't stdio and file access which offend me here;
it's the fact that UEFI doesn't provide a strdup() function. But the
fact that it's pointless without file access is a good enough excuse for
compiling it out.
Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

This isn't a file access function; it's still present.
Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

UEFI needs this too. Don't keep it only in the Windows/DOS ifdef block.
Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

This replaces SHUTDOWN/SHUTDOWN2 with BIO_closesocket.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NEmilia Käsper <emilia@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NEmilia Käsper <emilia@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

Avoids modifying certificate reference count, and thereby avoids locking.
Reviewed-by: NEmilia Käsper <emilia@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NEmilia Käsper <emilia@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

Without this, the peer certificate would never be deleted, resulting in
a memory leak.
Reviewed-by: NEmilia Käsper <emilia@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NEmilia Käsper <emilia@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

It was unexpected that OpenSSL::Test::setup() should be called twice
by the same recipe.  However, that may happen if a recipe combines
OpenSSL::Test and OpenSSL::Test::Simple, which can be a sensible thing
to do.  Therefore, we now allow it.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Signed-off-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Signed-off-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

This gets rid of the BEGINRAW..ENDRAW sections in engines/build.info.

This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.
Reviewed-by: NRich Salz <rsalz@openssl.org>

This gets rid of the BEGINRAW..ENDRAW sections in crypto/bn/build.info.

This also moves the assembler generating perl scripts to take the
output file name as last command line argument, where necessary.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Should it be needed because the recipes within a RAW section might
clash with those generated by Configure, it's possible to tell it
not to generate them with the use of OVERRIDES, for example:

    SOURCE[libfoo]=foo.c bar.c

    OVERRIDES=bar.o
    BEGINRAW[Makefile(unix)]
    bar.o: bar.c
        $(CC) $(CFLAGS) -DSPECIAL -c -o $@ $<
    ENDRAW[Makefile(unix)]
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

In some cases, one might want to generate some source files from
others, that's done as follows:

    GENERATE[foo.s]=asm/something.pl $(CFLAGS)
    GENERATE[bar.s]=asm/bar.S

The value of each GENERATE line is a command line or part of it.
Configure places no rules on the command line, except the the first
item muct be the generator file.  It is, however, entirely up to the
build file template to define exactly how those command lines should
be handled, how the output is captured and so on.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Add the ASYNC_is_capable() function and use it in speed.
Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

Signed-off-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>