In some environments, such as firmware, the current system time is entirely
meaningless. Provide a clean mechanism to suppress the checks against it.
Signed-off-by: NRich Salz <rsalz@akamai.com>
Reviewed-by: NTim Hudson <tjh@openssl.org>

This reverts the non-cleanup parts of commit c73ad690. We do actually
have a reasonable use case for OPENSSL_NO_RFC3779 in the EDK2 UEFI
build, since we don't have a strspn() function in our runtime environment
and we don't want the RFC3779 functionality anyway.

In addition, it changes the default behaviour of the Configure script so
that RFC3779 support isn't disabled by default. It was always disabled
from when it was first added in 2006, right up until the point where
OPENSSL_NO_RFC3779 was turned into a no-op, and the code in the
Configure script was left *trying* to disable it, but not actually
working.
Signed-off-by: NRich Salz <rsalz@akamai.com>
Reviewed-by: NTim Hudson <tjh@openssl.org>

After openssl_zalloc, cleanup more "set to 0/NULL" assignments.
Many are from github feedback.
Reviewed-by: NTim Hudson <tjh@openssl.org>

There are many places (nearly 50) where we malloc and then memset.
Add an OPENSSL_zalloc routine to encapsulate that.
(Missed one conversion; thanks Richard)
Also fixes GH328
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NTim Hudson <tjh@openssl.org>

Reviewed-by: NTim Hudson <tjh@openssl.org>

Initialize pointers in param id by the book (explicit NULL assignment,
rather than just memset 0).

In x509_verify_param_zero() set peername to NULL after freeing it.

In x509_vfy.c's internal check_hosts(), avoid potential leak of
possibly already non-NULL peername.  This is only set when a check
succeeds, so don't need to do this repeatedly in the loop.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Fix more potential leaks in X509_verify_cert()
Fix memory leak in ClientHello test
Fix memory leak in gost2814789 test
Fix potential memory leak in PKCS7_verify()
Fix potential memory leaks in X509_add1_reject_object()
Refactor to use "goto err" in cleanup.
Signed-off-by: NRich Salz <rsalz@akamai.com>
Reviewed-by: NEmilia Käsper <emilia@openssl.org>

Part of RT 3997
Per Ben, just jump to common exit code.
Signed-off-by: NRich Salz <rsalz@akamai.com>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

This was obsolete in 2001.  This is not the same as Gost94 digest.
Thanks to Dmitry Belyavsky <beldmit@gmail.com> for review and advice.
Reviewed-by: NMatt Caswell <matt@openssl.org>

Especially since after the #ifdef cleanups this is not useful.
Reviewed-by: NMatt Caswell <matt@openssl.org>

The -show_chain flag to the verify command line app shows information about
the chain that has been built. This commit adds the text "untrusted" against
those certificates that have been used from the untrusted list.
Reviewed-by: NRich Salz <rsalz@openssl.org>

The function X509_verify_cert checks the value of |ctx->chain| at the
beginning, and if it is NULL then it initialises it, along with the value
of ctx->untrusted. The normal way to use X509_verify_cert() is to first
call X509_STORE_CTX_init(); then set up various parameters etc; then call
X509_verify_cert(); then check the results; and finally call
X509_STORE_CTX_cleanup(). The initial call to X509_STORE_CTX_init() sets
|ctx->chain| to NULL. The only place in the OpenSSL codebase  where
|ctx->chain| is set to anything other than a non NULL value is in
X509_verify_cert itself. Therefore the only ways that |ctx->chain| could be
non NULL on entry to X509_verify_cert is if one of the following occurs:
1) An application calls X509_verify_cert() twice without re-initialising
in between.
2) An application reaches inside the X509_STORE_CTX structure and changes
the value of |ctx->chain| directly.

With regards to the second of these, we should discount this - it should
not be supported to allow this.

With regards to the first of these, the documentation is not exactly
crystal clear, but the implication is that you must call
X509_STORE_CTX_init() before each call to X509_verify_cert(). If you fail
to do this then, at best, the results would be undefined.

Calling X509_verify_cert() with |ctx->chain| set to a non NULL value is
likely to have unexpected results, and could be dangerous. This commit
changes the behaviour of X509_verify_cert() so that it causes an error if
|ctx->chain| is anything other than NULL (because this indicates that we
have not been initialised properly). It also clarifies the associated
documentation. This is a follow up commit to CVE-2015-1793.
Reviewed-by: NStephen Henson <steve@openssl.org>

During certificate verfification, OpenSSL will attempt to find an
alternative certificate chain if the first attempt to build such a chain
fails. An error in the implementation of this logic can mean that an
attacker could cause certain checks on untrusted certificates to be
bypassed, such as the CA flag, enabling them to use a valid leaf
certificate to act as a CA and "issue" an invalid certificate.

This occurs where at least one cert is added to the first chain from the
trust store, but that chain still ends up being untrusted. In that case
ctx->last_untrusted is decremented in error.

Patch provided by the BoringSSL project.

CVE-2015-1793
Reviewed-by: NStephen Henson <steve@openssl.org>

Also tighten X509_cmp_time to reject more than three fractional
seconds in the time; and to reject trailing garbage after the offset.

CVE-2015-1789
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Using an enum with -Wswitch means all lookup routines handle
all cases.  Remove X509_LU_PKEY which was never used.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

We had updates of certain header files in both Makefile.org and the
Makefile in the directory the header file lived in.  This is error
prone and also sometimes generates slightly different results (usually
just a comment that differs) depending on which way the update was
done.

This removes the file update targets from the top level Makefile, adds
an update: target in all Makefiles and has it depend on the depend: or
local_depend: targets, whichever is appropriate, so we don't get a
double run through the whole file tree.
Reviewed-by: NRich Salz <rsalz@openssl.org>

40 bit ciphers are limited to 512 bit RSA, 56 bit ciphers to 1024 bit.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

There are header files in crypto/ that are used by a number of crypto/
submodules.  Move those to crypto/include/internal and adapt the
affected source code and Makefiles.

The header files that got moved are:

crypto/cryptolib.h
crypto/md32_common.h
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NTim Hudson <tjh@openssl.org>

Compiling OpenSSL code with MSVC and /W4 results in a number of warnings.
One category of warnings is particularly interesting - C4701 (potentially
uninitialized local variable 'name' used). This warning pretty much means
that there's a code path which results in uninitialized variables being used
or returned. Depending on compiler, its options, OS, values in registers
and/or stack, the results can be nondeterministic. Cases like this are very
hard to debug so it's rational to fix these issues.

This patch contains a set of trivial fixes for all the C4701 warnings (just
initializing variables to 0 or NULL or appropriate error code) to make sure
that deterministic values will be returned from all the execution paths.

RT#3835
Signed-off-by: NMatt Caswell <matt@openssl.org>

Matt's note: All of these appear to be bogus warnings, i.e. there isn't
actually a code path where an unitialised variable could be used - its just
that the compiler hasn't been able to figure that out from the logic. So
this commit is just about silencing spurious warnings.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Just as with the OPENSSL_malloc calls, consistently use sizeof(*ptr)
for memset and memcpy.  Remove needless casts for those functions.
For memset, replace alternative forms of zero with 0.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

For a local variable:
        TYPE *p;
Allocations like this are "risky":
        p = OPENSSL_malloc(sizeof(TYPE));
if the type of p changes, and the malloc call isn't updated, you
could get memory corruption.  Instead do this:
        p = OPENSSL_malloc(sizeof(*p));
Also fixed a few memset() calls that I noticed while doing this.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Was memset with wrong sizeof.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Add OSSL_NELEM macro to e_os.h to determine the number of elements in an
array.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Use sizeof *foo parameter, to avoid these errors.
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

After the finale, the "real" final part. :)  Do a recursive grep with
"-B1 -w [a-zA-Z0-9_]*_free" to see if any of the preceeding lines are
an "if NULL" check that can be removed.
Reviewed-by: NTim Hudson <tjh@openssl.org>

There were a dozen-plus instances of this construct:
   if (0) { label: ..... }
Reviewed-by: NTim Hudson <tjh@openssl.org>

Don't check for NULL before calling OPENSSL_free
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Don't check for NULL before calling a free routine.  This gets X509_.*free:
    x509_name_ex_free X509_policy_tree_free X509_VERIFY_PARAM_free
    X509_STORE_free X509_STORE_CTX_free X509_PKEY_free
    X509_OBJECT_free_contents X509_LOOKUP_free X509_INFO_free
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Do not check for NULL before calling a free routine.  This addresses:
    ASN1_BIT_STRING_free ASN1_GENERALIZEDTIME_free ASN1_INTEGER_free
    ASN1_OBJECT_free ASN1_OCTET_STRING_free ASN1_PCTX_free ASN1_SCTX_free
    ASN1_STRING_clear_free ASN1_STRING_free ASN1_TYPE_free
    ASN1_UTCTIME_free M_ASN1_free_of
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Following ANSI C rules, remove the casts from calls to
OPENSSL_malloc and OPENSSL_realloc.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NViktor Dukhovni <openssl-users@dukhovni.org>