- 15 4月, 2016 3 次提交
-
-
由 Matt Caswell 提交于
In most cases we expect that people will be using shared libraries not static ones, therefore we make that the default. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
Travis identified a problem with freeing the ex_data locks which wasn't quite right in ff234405. Trying to fix it identified a further problem: the ex_data locks are cleaned up by OPENSSL_cleanup(), which is called explicitly by CRYPTO_mem_leaks(), but then later the BIO passed to CRYPTO_mem_leaks() is freed. An attempt is then made to use the ex_data lock already freed. Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Jérôme Duval 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org> Reviewed-by: NTim Hudson <tjh@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 14 4月, 2016 20 次提交
-
-
由 Richard Levitte 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org> Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org> Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Matt Caswell 提交于
no-stdio does not work with the apps. Since the tests also need the apps it doesn't support that either. Therefore we disable building of both. no-autoalginit is not compatible with the apps because it requires explicit loading of the algorithms, and the apps don't do that. Therefore we disable building the apps for this option. Similarly the tests depend on the apps so we also disable the tests. Finally the whole point about no-autoalginit is to avoid excessive executable sizes when doing static linking. Therefore we disable "shared" if this option is selected. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
Running a "make update" wanted to add err_cleanup to libcrypto.num which is wrong. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Rich Salz 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Lyon Chen 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Matt Caswell 提交于
Some locks were not being properly cleaned up during close down. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Shlomi Fish 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Matt Caswell 提交于
During Configure we attempt to check the kernel version of this platform to see whether we can compile the AFALG engine. If the kernel version looks recent enough then we enable AFALG. However when we compile e_afalg.c we check the version of the linux headers. If there is a mismatch between the linux headers and the currently running kernel then we don't compile the AFLAG engine and continue. This was causing a link error. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Viktor Dukhovni 提交于
Introduced in: commit 79c7f74d Author: Ben Laurie <ben@links.org> Date: Tue Mar 29 19:37:57 2016 +0100 Fix buffer overrun in ASN1_parse(). Problem input: https://tools.ietf.org/html/draft-ietf-curdle-pkix-eddsa-00#section-8.1 -----BEGIN PUBLIC KEY----- MC0wCAYDK2VkCgECAyEAGb9ECWmEzf6FQbrBZ9w7lshQhqowtrbLDFw4rXAxZuE= -----END PUBLIC KEY----- Previously: 0:d=0 hl=2 l= 45 cons: SEQUENCE 2:d=1 hl=2 l= 8 cons: SEQUENCE 4:d=2 hl=2 l= 3 prim: OBJECT :1.3.101.100 9:d=2 hl=2 l= 1 prim: ENUMERATED :02 Error in encoding 140735164989440:error:0D07207B:asn1 encoding routines:ASN1_get_object:header too long:../openssl/crypto/asn1/asn1_lib.c:148: Now: 0:d=0 hl=2 l= 45 cons: SEQUENCE 2:d=1 hl=2 l= 8 cons: SEQUENCE 4:d=2 hl=2 l= 3 prim: OBJECT :1.3.101.100 9:d=2 hl=2 l= 1 prim: ENUMERATED :02 12:d=1 hl=2 l= 33 prim: BIT STRING 0000 - 00 19 bf 44 09 69 84 cd-fe 85 41 ba c1 67 dc 3b ...D.i....A..g.; 0010 - 96 c8 50 86 aa 30 b6 b6-cb 0c 5c 38 ad 70 31 66 ..P..0....\8.p1f 0020 - e1 . Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Viktor Dukhovni 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
Document removal of no-aes, no-hmac, no-rsa, no-sha and no-md5. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
Update the config options documentation based on feedback. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
There were a lot of options missing from INSTALL. This adds descriptions for them. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
no-hmac is no longer an option so remove OPENSSL_NO_HMAC guards. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
no-sha is no longer an option so remove OPENSSL_NO_SHA guards. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
no-aes is no longer a Configure option and therefore the OPENSSL_NO_AES guards can be removed. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
These algorithms are fundamental and extensively used. The "no-" options do not work either in 1.1.0 or in other released branches. Therefore the ability to disable them should be removed. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Rich Salz 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 13 4月, 2016 17 次提交
-
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Dr. Stephen Henson 提交于
The check_defer() function was used to ensure that EVP_cleanup() was always called before OBJ_cleanup(). The new cleanup code ensures this so it is no longer needed. Remove obj_cleanup() call in OID config module: it is not needed any more either. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Richard Levitte 提交于
Don't expose purely libcrypto internal symbols, even to libssl. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Andy Polyakov 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Andy Polyakov 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Richard Levitte 提交于
When compressing, the output / input is a binary format, not a text format like BASE64. This is important on Windows, where a ^Z in a text file is seen as EOF, and there could be a ^Z somewhere in a compressed file, cutting it short as input. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Richard Levitte 提交于
The handling was Unix centric, already in Configure. Change that to just collect the value and let the build file templates figure out what to do with it. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Richard Levitte 提交于
Instead of absolute hard coding of the libz library name, have it use the macro LIBZ, which is set to defaults we know in case it's undefined. This allows our configuration to set something that's sane on current or older platforms, and allows the user to override it by defining LIBZ themselves. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Richard Levitte 提交于
The macros ZLIB and ZLIB_SHARED weren't appropriately defined, deviating wrongly from how they worked in earlier OpenSSL versions. So, restore it so that ZLIB is defined if configured "enable-zlib" and so that ZLIB and ZLIB_SHARED are defined if configured "enable-zlib-dynamic". Additionally, correct the interpretation of the --with-zlib-lib value on Windows and VMS, where it's used to indicate the actual zlib zlib library file / logical name, as that can differ depending on zlib version and packaging on those platforms. Finally for Windows and VMS, we also define the macro LIBZ with that file name / logical name when configured "zlib-dynamic", so the compression unit can pick it up and use it. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Matt Caswell 提交于
The above config options were failing in test_ssl_old. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
There is a preference for suffixes to indicate that a function is internal rather than prefixes. Note: the suffix is only required to disambiguate internal functions and public symbols with the same name (but different case) Reviewed-by: NTim Hudson <tjh@openssl.org> Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
Tweak to documentation following feedback Reviewed-by: NTim Hudson <tjh@openssl.org> Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
Documentation fix ups as a result of feedback received. Reviewed-by: NTim Hudson <tjh@openssl.org> Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
The no-op de-init macros may fail because of extraneous ";", so we use a slightly different construct instead. Reviewed-by: NTim Hudson <tjh@openssl.org> Reviewed-by: NRichard Levitte <levitte@openssl.org>
-