Add colon when printing Registered ID.
Remove extra space when printing DirName.
Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NKurt Roeckx <kurt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1401)

In one failure case, it used to return -1. That failure case
(CTLOG_new() returning NULL) was not usefully distinct from all of the
other failure cases.
Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1407)

Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1413)

Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1413)

This is an entirely useless function, given that CTLOG is publicly
immutable.
Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1406)

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

These functions are:

    SSL_use_certificate_file
    SSL_use_RSAPrivateKey_file
    SSL_use_PrivateKey_file
    SSL_CTX_use_certificate_file
    SSL_CTX_use_RSAPrivateKey_file
    SSL_CTX_use_PrivateKey_file
    SSL_use_certificate_chain_file

Internally, they use BIO_s_file(), which is defined and implemented at
all times, even when OpenSSL is configured no-stdio.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

The macros that produce PEM_write_FOO() andd PEM_read_FOO() only do so
unless 'no-stdio' has been configured.  mkdef.pl should mimic that by
marking those functions with the "STDIO" algo.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

These were guarded by $disabled{tests}.  However, 'tests' is disabled
if we configure 'no-stdio', which means that we don't detect the lack
of OPENSSL_NO_STDIO guards in our public header files.  So we move the
generation and build of test/buildtest_*.c to be unconditional.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Thanks to Hanno Böck for reporting this bug.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Should result in more accurate header file coverage, see
https://github.com/eddyxu/cpp-coveralls/issues/54Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Run tests with coverage and report to coveralls.io

For simplicity, this currently only adds a single target in a
configuration that attempts to maximize coverage. The true CI coverage
from all the various builds may be a little larger.

The coverage run has the following configuration:
- no-asm: since we can't track asm coverage anyway, might as well measure the
  non-asm code coverage.
- Enable various disabled-by-default options:
  - rc5
  - md2
  - ec_nistp_64_gcc_128
  - ssl3
  - ssl3-method
  - weak-ssl-ciphers

Finally, observe that no-pic implies no-shared, and therefore running
both builds in the matrix is redundant.
Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Thank to Shi Lei for reporting this bug.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NEmilia Käsper <emilia@openssl.org>

We mark small comments with a dash immediately following the starting /*.
However, *INDENT-(ON|OFF)* comments shouldn't be treated that way, or
indent will ignore them if we do.
Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NTim Hudson <tjh@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>

Baroque, almost uncommented code triggers behaviour which is undefined
by the C standard. You might quite reasonably not care that the code was
broken on ones-complement machines, but if we support a ubsan build then
we need to at least pretend to care.

It looks like the special-case code for 64-bit big-endian is going to
behave differently (and wrongly) on wrap-around, because it treats the
values as signed. That seems wrong, and allows replay and other attacks.
Surely you need to renegotiate and start a new epoch rather than
wrapping around to sequence number zero again?
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>

DTLSv1_client_method() is deprecated, but it was the only way to obtain
DTLS1_BAD_VER support. The SSL_OP_CISCO_ANYCONNECT hack doesn't work with
DTLS_client_method(), and it's relatively non-trivial to make it work without
expanding the hack into lots of places.

So deprecate SSL_OP_CISCO_ANYCONNECT with DTLSv1_client_method(), and make
it work with SSL_CTX_set_{min,max}_proto_version(DTLS1_BAD_VER) instead.
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>

Commit 3eb2aff4 ("Add support for minimum and maximum protocol version
supported by a cipher") disabled all ciphers for DTLS1_BAD_VER.

That wasn't helpful. Give them back.
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>

DTLS version numbers are strange and backwards, except DTLS1_BAD_VER so
we have to make a special case for it.

This does leave us with a set of macros which will evaluate their arguments
more than once, but it's not a public-facing API and it's not like this is
the kind of thing where people will be using DTLS_VERSION_LE(x++, y) anyway.
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>

The Change Cipher Spec message in this ancient pre-standard version of DTLS
that Cisco are unfortunately still using in their products, is 3 bytes.

Allow it.
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>

Commit d8e8590e ("Fix missing return value checks in SCTP") made the
DTLS handshake fail, even for non-SCTP connections, if
SSL_export_keying_material() fails. Which it does, for DTLS1_BAD_VER.

Apply the trivial fix to make it succeed, since there's no real reason
why it shouldn't even though we never need it.
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

The options RC4_CHUNK_LL, DES_PTR, and BF_PTR were removed by Rich
in commit 3e9e810f but were still
sticking around in a coupule configuration entries.

Since they're unused, remove them.
Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1390)

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1389)

Reviewed-by: NMatt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1389)

Thanks to Shi Lei for reporting this issue.
Reviewed-by: NRich Salz <rsalz@openssl.org>

  into a structure , to avoid any accident .

Plus some few cleanups
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

- Commit a95ce7f builds *.manifest files on windows -- added them to
  .gitignore.

- ignore pod -> html temp file
Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

... get_by_fingerprint() and get_by_alias()
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

 of X509_NAME_add_entry_by_OBJ, X509_NAME_add_entry_by_NID, X509_NAME_ENTRY_create_by_NID
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

- append_ia5
- old_entry_print
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>