Fixed assorted missing return value checks in c3_cpols.c
Reviewed-by: NRich Salz <rsalz@openssl.org>

The return value from ASN1_STRING_new() was not being checked which could
lead to a NULL deref in the event of a malloc failure. Also fixed a mem
leak in the error path.
Reviewed-by: NRich Salz <rsalz@openssl.org>

The return value from ASN1_STRING_new() was not being checked which could
lead to a NULL deref in the event of a malloc failure. Also fixed a mem
leak in the error path.
Reviewed-by: NRich Salz <rsalz@openssl.org>

The call to asn1_do_adb can return NULL on error, so we should check the
return value before attempting to use it.
Reviewed-by: NRich Salz <rsalz@openssl.org>

ASN1_primitive_new takes an ASN1_ITEM * param |it|. There are a couple
of conditional code paths that check whether |it| is NULL or not - but
later |it| is deref'd unconditionally. If |it| was ever really NULL then
this would seg fault. In practice ASN1_primitive_new is marked as an
internal function in the public header file. The only places it is ever
used internally always pass a non NULL parameter for |it|. Therefore, change
the code to sanity check that |it| is not NULL, and remove the conditional
checking.
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NAndy Polyakov <appro@openssl.org>

Calling EVP_DigestInit_ex which has already had the digest set up for it
should be possible. You are supposed to be able to pass NULL for the type.
However currently this seg faults.
Reviewed-by: NAndy Polyakov <appro@openssl.org>

In the event of an error |rr| could be NULL. Therefore don't assume you can
use |rr| in the error handling code.
Reviewed-by: NAndy Polyakov <appro@openssl.org>

[and respect error return value in ssltest.c]
Reviewed-by: NMatt Caswell <matt@openssl.org>

Suggested by John Foley <foleyj@cisco.com>.
Reviewed-by: NMatt Caswell <matt@openssl.org>

Reviewed-by: NDr. Stephen Henson <steve@openssl.org>

Configure would load the glob "Configurations*".  The problem with
this is that it also loads all kinds of backups of those
configurations that some editors do, like emacs' classic
'Configurations~'.  The solution is to give them an extension, such as
'.conf', and make sure to end the glob with that.

Also, because 'Configurations.conf' makes for a silly name, and
because a possibly large number of configurations will become clutter,
move them to a subdirectory 'Configurations/', and rename them to
something more expressive, as well as something that sets up some form
of sorting order.  Thus:

    Configurations	->	Configurations/10-main.conf
    Configurations.team	->	Configurations/90-team.conf

Finally, make sure that Configure sorts the list of files that 'glob'
produces, and adapt Makefile.org.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Cleanse various intermediate buffers used by the PRF.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Ensure all malloc failures return -1.

Reported by Adam Langley (Google).
Reviewed-by: NMatt Caswell <matt@openssl.org>

BIO_debug_callback() no longer assumes the hexadecimal representation of
a pointer fits in 8 characters.
Signed-off-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>

Fix security issue where under certain conditions a client can complete a
handshake with an unseeded PRNG. The conditions are:
- Client is on a platform where the PRNG has not been seeded, and the
user has not seeded manually
- A protocol specific client method version has been used (i.e. not
SSL_client_methodv23)
- A ciphersuite is used that does not require additional random data
from the PRNG beyond the initial ClientHello client random
(e.g. PSK-RC4-SHA)

If the handshake succeeds then the client random that has been used will
have been generated from a PRNG with insufficient entropy and therefore
the output may be predictable.

For example using the following command with an unseeded openssl will
succeed on an unpatched platform:

openssl s_client -psk 1a2b3c4d -tls1_2 -cipher PSK-RC4-SHA

CVE-2015-0285
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Signed-off-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>

Since commit 741c9959 ("DTLS revision."), we put the wrong protocol
version into our ClientHello for DTLS1_BAD_VER. The old DTLS
code which used ssl->version was replaced by the more generic SSL3 code
which uses ssl->client_version. The Cisco ASA no longer likes our
ClientHello.

RT#3711
Reviewed-by: NRich Salz <rsalz@openssl.org>

Commit 9cf0f187 in HEAD, and 68039af3 in 1.0.2, removed a version check
from dtls1_buffer_message() which was needed to distinguish between DTLS
1.x and Cisco's pre-standard version of DTLS (DTLS1_BAD_VER).

Based on an original patch by David Woodhouse <dwmw2@infradead.org>
RT#3703
Reviewed-by: NTim Hudson <tjh@openssl.org>

New function ASN1_STRING_clear_free which cleanses an ASN1_STRING
structure before freeing it.

Call ASN1_STRING_clear_free on PKCS#8 private key components.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NTim Hudson <tjh@openssl.org>

Signed-off-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NTim Hudson <tjh@openssl.org>

Run make errors on master
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Make the output from mkerr.pl consistent with the newly reformatted code.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

crypto/crypto-lib.com - catch up with the OCSP changes
test/maketest.com and test/tests.com - catch up with the addition of test_evp_extra
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>

This patch uses warning/fatal constants instead of numbers with comments for
warning/alerts in d1_pkt.c and s3_pkt.c

RT#3725
Reviewed-by: NRich Salz <rsalz@openssl.org>

Miscellaneous unchecked malloc fixes. Also fixed some mem leaks on error
paths as I spotted them along the way.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Add RIPEMD160 and whirlpool test data.
Add Count keyword to repeatedly call EVP_DigestUpate.
Reviewed-by: NMatt Caswell <matt@openssl.org>

CVE-2015-0288
PR#3708
Reviewed-by: NMatt Caswell <matt@openssl.org>

The format script didn't correctly recognise some ASN.1 macros and
didn't reformat some files as a result. Fix script and reformat
affected files.
Reviewed-by: NTim Hudson <tjh@openssl.org>

ACKNOWLEDGEMENTS is now spelled correctly :)
README.ASN1 talked about 0.9.6, so it's deleted.
I turned doc/standards.txt into a set of one-line summaries of RFCs, and
also updated the pointers to original sources (to be web links)
Reviewed-by: NRichard Levitte <levitte@openssl.org>

These ciphers are removed:
    TLS1_CK_RSA_EXPORT1024_WITH_RC4_56_MD5
    TLS1_CK_RSA_EXPORT1024_WITH_RC2_CBC_56_MD5
    TLS1_CK_RSA_EXPORT1024_WITH_DES_CBC_SHA
    TLS1_CK_DHE_DSS_EXPORT1024_WITH_DES_CBC_SHA
    TLS1_CK_RSA_EXPORT1024_WITH_RC4_56_SHA
    TLS1_CK_DHE_DSS_EXPORT1024_WITH_RC4_56_SHA
    TLS1_CK_DHE_DSS_WITH_RC4_128_SHA
They were defined in a long-expired IETF internet-draft:
draft-ietf-tls-56-bit-ciphersuites-01.txt
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Some Cisco appliances use a pre-standard version number for DTLS. We support
this as DTLS1_BAD_VER within the code.

This change fixes d2i_SSL_SESSION for that DTLS version.

Based on an original patch by David Woodhouse <dwmw2@infradead.org>

RT#3704
Reviewed-by: NTim Hudson <tjh@openssl.org>

Added various missing return value checks in tls1_change_cipher_state.
Reviewed-by: NRichard Levitte <levitte@openssl.org>