- 16 5月, 2016 1 次提交
-
-
由 FdaSilvaYY 提交于
Add a status return value instead of void. Add some sanity checks on reference counter value. Update the docs. Reviewed-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 06 5月, 2016 1 次提交
-
-
由 Matt Caswell 提交于
If the application has limited the size of the async pool using ASYNC_init_thread() then we could run out of jobs while trying to start a libssl io operation. However libssl was failing to handle this and treating it like a fatal error. It should not be fatal...we just need to retry when there are jobs available again. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 29 4月, 2016 1 次提交
-
-
由 FdaSilvaYY 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/952)
-
- 22 4月, 2016 1 次提交
-
-
由 Viktor Dukhovni 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 14 4月, 2016 1 次提交
-
-
由 Lyon Chen 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 13 4月, 2016 2 次提交
-
-
由 Matt Caswell 提交于
The no-op de-init macros may fail because of extraneous ";", so we use a slightly different construct instead. Reviewed-by: NTim Hudson <tjh@openssl.org> Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
SSL_COMP_free_compression_methods() should not be called expicitly - we should leave auto-deinit to clean this up instead. Reviewed-by: NTim Hudson <tjh@openssl.org> Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 11 4月, 2016 1 次提交
-
-
由 Kazuki Yamaguchi 提交于
Add an accessor for SSL_CTX. Since libssl was made opaque, there is no way for users to access the cipher_list, while users can set the cipher_list by SSL_CTX_set_cipher_list(). Reviewed-by: NMatt Caswell <matt@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 08 4月, 2016 3 次提交
-
-
由 Rich Salz 提交于
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
由 Viktor Dukhovni 提交于
Signed-off-by: NRob Percival <robpercival@google.com> Reviewed-by: NEmilia Käsper <emilia@openssl.org>
-
由 Viktor Dukhovni 提交于
Suppress CT callbacks with aNULL or PSK ciphersuites that involve no certificates. Ditto when the certificate chain is validated via DANE-TA(2) or DANE-EE(3) TLSA records. Also skip SCT processing when the chain is fails verification. Move and consolidate CT callbacks from libcrypto to libssl. We also simplify the interface to SSL_{,CTX_}_enable_ct() which can specify either a permissive mode that just collects information or a strict mode that requires at least one valid SCT or else asks to abort the connection. Simplified SCT processing and options in s_client(1) which now has just a simple pair of "-noct" vs. "-ct" options, the latter enables the permissive callback so that we can complete the handshake and report all relevant information. When printing SCTs, print the validation status if set and not valid. Signed-off-by: NRob Percival <robpercival@google.com> Reviewed-by: NEmilia Käsper <emilia@openssl.org>
-
- 05 4月, 2016 2 次提交
-
-
由 Rich Salz 提交于
This reverts commit 2b0bcfaf. It wasn't reviewed. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 FdaSilvaYY 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 30 3月, 2016 1 次提交
-
-
由 Todd Short 提交于
The SSL, SSL_CTX, and SSL_SESSION indices were being referenced incorrectly in the "_get_ex_new_index" functions. Remove the STORE EX_DATA index; that functionality is gone. Reviewed-by: NEmilia Käsper <emilia@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 28 3月, 2016 1 次提交
-
-
由 Fedor Indutny 提交于
We now send the highest supported version by the client, even if the session uses an older version. This fixes 2 problems: - When you try to reuse a session but the other side doesn't reuse it and uses a different protocol version the connection will fail. - When you're trying to reuse a session with an old version you might be stuck trying to reuse the old version while both sides support a newer version Signed-off-by: NKurt Roeckx <kurt@roeckx.be> Reviewed-by: NViktor Dukhovni <viktor@openssl.org> GH: #852, MR: #2452
-
- 22 3月, 2016 2 次提交
-
-
由 David Benjamin 提交于
BIO_new, etc., don't need a non-const BIO_METHOD. This allows all the built-in method tables to live in .rodata. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
Misc fixes for no-sock Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 21 3月, 2016 1 次提交
-
-
由 Rich Salz 提交于
Don't have #error statements in header files, but instead wrap the contents of that file in #ifndef OPENSSL_NO_xxx This means it is now always safe to include the header file. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 18 3月, 2016 1 次提交
-
-
由 Matt Caswell 提交于
mkdef.pl was not detecting no-comp functions. This updates the header file so that mkdef.pl detects that no-comp applies, and the functions are marked accordingly. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 17 3月, 2016 1 次提交
-
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 11 3月, 2016 1 次提交
-
-
由 Rob Percival 提交于
Remove 'log' field from SCT and related accessors In order to still have access to an SCT's CTLOG when calling SCT_print, SSL_CTX_get0_ctlog_store has been added. Improved documentation for some CT functions in openssl/ssl.h. Reviewed-by: NEmilia Käsper <emilia@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 10 3月, 2016 4 次提交
-
-
由 Kurt Roeckx 提交于
Reviewed-by: NViktor Dukhovni <viktor@openssl.org> MR: #1824
-
由 Kurt Roeckx 提交于
Reviewed-by: NViktor Dukhovni <viktor@openssl.org> MR: #1824
-
由 Kurt Roeckx 提交于
Reviewed-by: NViktor Dukhovni <viktor@openssl.org> MR: #1595
-
由 Kurt Roeckx 提交于
Reviewed-by: NViktor Dukhovni <viktor@openssl.org> MR: #1595
-
- 09 3月, 2016 1 次提交
-
-
由 Alessandro Ghedini 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 08 3月, 2016 5 次提交
-
-
由 Todd Short 提交于
Add functions to determine authentication, key-exchange, FIPS and AEAD. Reviewed-by: NEmilia Käsper <emilia@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Todd Short 提交于
* Perform ALPN after the SNI callback; the SSL_CTX may change due to that processing * Add flags to indicate that we actually sent ALPN, to properly error out if unexpectedly received. * clean up ssl3_free() no need to explicitly clear when doing memset * document ALPN functions Signed-off-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NEmilia Käsper <emilia@openssl.org>
-
由 Matt Caswell 提交于
This is similar to SSL_pending() but just returns a 1 if there is data pending in the internal OpenSSL buffers or 0 otherwise (as opposed to SSL_pending() which returns the number of bytes available). Unlike SSL_pending() this will work even if "read_ahead" is set (which is the case if you are using read pipelining, or if you are doing DTLS). A 1 return value means that we have unprocessed data. It does *not* necessarily indicate that there will be application data returned from a call to SSL_read(). The unprocessed data may not be application data or there could be errors when we attempt to parse the records. Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Matt Caswell 提交于
This capability is required for read pipelining. We will only read in as many records as will fit in the read buffer (and the network can provide in one go). The bigger the buffer the more records we can process in parallel. Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Matt Caswell 提交于
Use the new pipeline cipher capability to encrypt multiple records being written out all in one go. Two new SSL/SSL_CTX parameters can be used to control how this works: max_pipelines and split_send_fragment. max_pipelines defines the maximum number of pipelines that can ever be used in one go for a single connection. It must always be less than or equal to SSL_MAX_PIPELINES (currently defined to be 32). By default only one pipeline will be used (i.e. normal non-parallel operation). split_send_fragment defines how data is split up into pipelines. The number of pipelines used will be determined by the amount of data provided to the SSL_write call divided by split_send_fragment. For example if split_send_fragment is set to 2000 and max_pipelines is 4 then: SSL_write called with 0-2000 bytes == 1 pipeline used SSL_write called with 2001-4000 bytes == 2 pipelines used SSL_write called with 4001-6000 bytes == 3 pipelines used SSL_write_called with 6001+ bytes == 4 pipelines used split_send_fragment must always be less than or equal to max_send_fragment. By default it is set to be equal to max_send_fragment. This will mean that the same number of records will always be created as would have been created in the non-parallel case, although the data will be apportioned differently. In the parallel case data will be spread equally between the pipelines. Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 04 3月, 2016 1 次提交
-
-
由 Rob Percival 提交于
Disabled by default, but can be enabled by setting the ct_validation_callback on a SSL or SSL_CTX. Reviewed-by: NBen Laurie <ben@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 03 3月, 2016 2 次提交
-
-
由 Emilia Kasper 提交于
1) Simplify code with better PACKET methods. 2) Make broken SNI parsing explicit. SNI was intended to be extensible to new name types but RFC 4366 defined the syntax inextensibly, and OpenSSL has never parsed SNI in a way that would allow adding a new name type. RFC 6066 fixed the definition but due to broken implementations being widespread, it appears impossible to ever extend SNI. 3) Annotate resumption behaviour. OpenSSL doesn't currently handle all extensions correctly upon resumption. Annotate for further clean-up. 4) Send an alert on ALPN protocol mismatch. Reviewed-by: NKurt Roeckx <kurt@openssl.org>
-
由 Christian Heimes 提交于
This patch provides getters for default_passwd_cb and userdata for SSL and SSL_CTX. The getter functions are required to port Python's ssl module to OpenSSL 1.1.0. Reviewed-by: NRichard Levitte <levitte@openssl.org> Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 29 2月, 2016 2 次提交
-
-
由 Matt Caswell 提交于
Implementation experience has shown that the original plan for async wait fds was too simplistic. Originally the async logic created a pipe internally and user/engine code could then get access to it via API calls. It is more flexible if the engine is able to create its own fd and provide it to the async code. Another issue is that there can be a lot of churn in the fd value within the context of (say) a single SSL connection leading to continually adding and removing fds from (say) epoll. It is better if we can provide some stability of the fd value across a whole SSL connection. This is problematic because an engine has no concept of an SSL connection. This commit refactors things to introduce an ASYNC_WAIT_CTX which acts as a proxy for an SSL connection down at the engine layer. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
VisualStudio 2015 has a bug where an internal compiler error was occurring. By reordering the DEFINE_STACK_OF declarations for SSL_CIPHER and SSL_COMP until after the ssl3.h include everything seems ok again. Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
- 25 2月, 2016 1 次提交
-
-
由 Rich Salz 提交于
Reviewed-by: NEmilia Käsper <emilia@openssl.org>
-
- 20 2月, 2016 1 次提交
-
-
由 Emilia Kasper 提交于
Adapted from BoringSSL. Added a test. The extension parsing code is already attempting to already handle this for some individual extensions, but it is doing so inconsistently. Duplicate efforts in individual extension parsing will be cleaned up in a follow-up. Reviewed-by: NStephen Henson <steve@openssl.org>
-
- 13 2月, 2016 1 次提交
-
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 12 2月, 2016 1 次提交
-
-
由 Rich Salz 提交于
To enable heartbeats for DTLS, configure with enable-heartbeats. Heartbeats for TLS have been completely removed. This addresses RT 3647 Reviewed-by: NRichard Levitte <levitte@openssl.org>
-