The MULTIBLOCK code uses a "jumbo" sized write buffer which it allocates
and then frees later. Pipelining however introduced multiple pipelines. It
keeps track of how many pipelines are initialised using numwpipes.
Unfortunately the MULTIBLOCK code was not updating this when in deallocated
its buffers, leading to a buffer being marked as initialised but set to
NULL.

RT#4618
Reviewed-by: NRich Salz <rsalz@openssl.org>

Previously if we received an empty record we just threw it away and
ignored it. Really though if we get an empty record of a different content
type to what we are expecting then that should be an error, i.e. we should
reject out of context empty records. This commit makes the necessary changes
to achieve that.

RT#4395
Reviewed-by: NAndy Polyakov <appro@openssl.org>

Windows was complaining about a unary minus operator being applied to an
unsigned type. It did seem to go on and do the right thing anyway, but the
code does look a little suspect. This fixes it.
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

We used to use the wrec field in the record layer for keeping track of the
current record that we are writing out. As part of the pipelining changes
this has been moved to stack allocated variables to do the same thing,
therefore the field is no longer needed.
Reviewed-by: NTim Hudson <tjh@openssl.org>

This capability is required for read pipelining. We will only read in as
many records as will fit in the read buffer (and the network can provide
in one go). The bigger the buffer the more records we can process in
parallel.
Reviewed-by: NTim Hudson <tjh@openssl.org>

With read pipelining we use multiple SSL3_RECORD structures for reading.
There are SSL_MAX_PIPELINES (32) of them defined (typically not all of these
would be used). Each one has a 16k compression buffer allocated! This
results in a significant amount of memory being consumed which, most of the
time, is not needed.  This change swaps the allocation of the compression
buffer to be lazy so that it is only done immediately before it is actually
used.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Read pipelining is controlled in a slightly different way than with write
pipelining. While reading we are constrained by the number of records that
the peer (and the network) can provide to us in one go. The more records
we can get in one go the more opportunity we have to parallelise the
processing.

There are two parameters that affect this:
* The number of pipelines that we are willing to process in one go. This is
controlled by max_pipelines (as for write pipelining)
* The size of our read buffer. A subsequent commit will provide an API for
adjusting the size of the buffer.

Another requirement for this to work is that "read_ahead" must be set. The
read_ahead parameter will attempt to read as much data into our read buffer
as the network can provide. Without this set, data is read into the read
buffer on demand. Setting the max_pipelines parameter to a value greater
than 1 will automatically also turn read_ahead on.

Finally, the read pipelining as currently implemented will only parallelise
the processing of application data records. This would only make a
difference for renegotiation so is unlikely to have a significant impact.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Use the new pipeline cipher capability to encrypt multiple records being
written out all in one go. Two new SSL/SSL_CTX parameters can be used to
control how this works: max_pipelines and split_send_fragment.

max_pipelines defines the maximum number of pipelines that can ever be used
in one go for a single connection. It must always be less than or equal to
SSL_MAX_PIPELINES (currently defined to be 32). By default only one
pipeline will be used (i.e. normal non-parallel operation).

split_send_fragment defines how data is split up into pipelines. The number
of pipelines used will be determined by the amount of data provided to the
SSL_write call divided by split_send_fragment. For example if
split_send_fragment is set to 2000 and max_pipelines is 4 then:
SSL_write called with 0-2000 bytes == 1 pipeline used
SSL_write called with 2001-4000 bytes == 2 pipelines used
SSL_write called with 4001-6000 bytes == 3 pipelines used
SSL_write_called with 6001+ bytes == 4 pipelines used

split_send_fragment must always be less than or equal to max_send_fragment.
By default it is set to be equal to max_send_fragment. This will mean that
the same number of records will always be created as would have been
created in the non-parallel case, although the data will be apportioned
differently. In the parallel case data will be spread equally between the
pipelines.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

This was done by the following
        find . -name '*.[ch]' | /tmp/pl
where /tmp/pl is the following three-line script:
        print unless $. == 1 && m@/\* .*\.[ch] \*/@;
        close ARGV if eof; # Close file to reset $.

And then some hand-editing of other files.
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

The function RECORD_LAYER_clear() is supposed to clear the contents of the
RECORD_LAYER structure, but retain certain data such as buffers that are
allocated. Unfortunately one buffer (for compression) got missed and was
inadvertently being wiped, thus causing a memory leak.

In part this is due to the fact that RECORD_LAYER_clear() was reaching
inside SSL3_BUFFERs and SSL3_RECORDs, which it really shouldn't. So, I've
rewritten it to only clear the data it knows about, and to defer clearing
of SSL3_RECORD and SSL3_BUFFER structures to SSL_RECORD_clear() and the
new function SSL3_BUFFER_clear().
Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

This commit changes the way that we do server side protocol version
negotiation. Previously we had a whole set of code that had an "up front"
state machine dedicated to the negotiating the protocol version. This adds
significant complexity to the state machine. Historically the justification
for doing this was the support of SSLv2 which works quite differently to
SSLv3+. However, we have now removed support for SSLv2 so there is little
reason to maintain this complexity.

The one slight difficulty is that, although we no longer support SSLv2, we
do still support an SSLv3+ ClientHello in an SSLv2 backward compatible
ClientHello format. This is generally only used by legacy clients. This
commit adds support within the SSLv3 code for these legacy format
ClientHellos.

Server side version negotiation now works in much the same was as DTLS,
i.e. we introduce the concept of TLS_ANY_VERSION. If s->version is set to
that then when a ClientHello is received it will work out the most
appropriate version to respond with. Also, SSLv23_method and
SSLv23_server_method have been replaced with TLS_method and
TLS_server_method respectively. The old SSLv23* names still exist as
macros pointing at the new name, although they are deprecated.

Subsequent commits will look at client side version negotiation, as well of
removal of the old s23* code.
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Fix up various things that were missed during the record layer work. All
instances where we are breaking the encapsulation rules.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Submitted by: Neel Mehta, Adam Langley, Bodo Moeller

This change resolves a number of problems and obviates multiple kludges.
A new feature is that you can now say "AES256" or "AES128" (not just
"AES", which enables both).

In some cases the ciphersuite list generated from a given string is
affected by this change.  I hope this is just in those cases where the
previous behaviour did not make sense.

questions now is the OpenSSL core team under openssl-core@openssl.org.  And
add a paragraph about the dual-license situation to make sure people recognize
that _BOTH_ the OpenSSL license _AND_ the SSLeay license apply to the OpenSSL
toolkit.