Done too soon, this is for future OpenSSL 1.2.0

This reverts commit 6c62f9e1.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NTim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1669)

Simplify PKCS#12 PBE algorithm by working out Ij + B + 1 directly
instead of using BIGNUMs.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1922)

Under certain circumstances, the libcrypto init code would loop,
causing a deadlock.  This would typically happen if something in
ossl_init_base() caused an OpenSSL error, and the error stack routines
would recurse into the init code before the flag that ossl_init_base()
had been run was checked.

This change makes sure ossl_init_base isn't run once more of the base
is initiated.

Thanks to Dmitry Kostjuchenko for the idea.

Fixes Github issue #1899
Reviewed-by: NMatt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1922)

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Useful e.g. to fully script CA commands
Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1797)

prio openssl 1.1.0 seed_len < q was accepted and the seed argument was
then ignored. Now DSA_generate_parameters_ex() returns an error in such
a case but no error string.
Signed-off-by: NSebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1657)

This reverts commit 349d1cfd.

The proposed fix is incorrect. It marks the "run_once" code as having
finished before it has. The intended semantics of run_once is that no
threads should proceed until the code has run exactly once. With this
change the "second" thread will think the run_once code has already been
run and will continue, even though it is still in progress. This could
result in a crash or other incorrect behaviour.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NTim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1669)

Fixed deadlock in CRYPTO_THREAD_run_once() if call to init() is causing
a recursive call to CRYPTO_THREAD_run_once() again that is causing a hot
deadloop inside do { } while (result == ONCE_ININIT); section.

CLA: trivial
Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1913)

Avoid a memory alignment issue.
Signed-off-by: NMatthias Kraft <Matthias.Kraft@softwareag.com>
CLA: trivial
Reviewed-by: NAndy Polyakov <appro@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1650)

Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1837)

Replace the 'SSL' broken link with SSL_CTX_set_security_level which seems not being referenced from elsewhere
Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1898)

CLA: trivial
Reviewed-by: NAndy Polyakov <appro@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1909)

New minimal fuzz corpora set
Reviewed-by: NAndy Polyakov <appro@openssl.org>

GH: #1910

llvm's ubsan reported:
runtime error: negation of -9223372036854775808 cannot be represented in
type 'int64_t' (aka 'long'); cast to an unsigned type to negate this
value to itself

Found using libfuzzer
Reviewed-by: NRich Salz <rsalz@openssl.org>

GH: #1908

This provides up to 30% better performance on some of recent processors.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

In order to minimize dependency on assembler version a number of
post-SSE2 instructions are encoded manually. But in order to simplify
the procedure only register operands are considered. Non-register
operands are passed down to assembler. Module in question uses pshufb
with memory operands, and old [GNU] assembler can't handle it.
Fortunately in this case it's possible skip just the problematic
segment without skipping SSSE3 support altogether.
Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

The links weren't properly terminated with a "
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1901)

Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1900)

Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1900)

Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1900)

Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1900)

When configured no-dso, there are no DSO_{whatever} macros defined.
Therefore, before checking those, you have to check if OPENSSL_NO_DSO
is defined.
Reviewed-by: NMatt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1902)

- the pod path hadn't been changed with the directory layout change
- apparently, pod2html doesn't add ".html" at the end of links, making
  them useless, so we need to fix that

With thanks for the report to Michel <michel.sales@free.fr>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1896)

The test loops through all the ciphers, attempting to test each one in turn.
However version negotiation happens before cipher selection, so with TLSv1.3
switched on if we use a non-TLSv1.3 compatible cipher suite we get "no
share cipher".
Reviewed-by: NRich Salz <rsalz@openssl.org>

Now that we can link specifically with static libraries, the immediate
need to split ppccap.c (and eventually other *cap.c files) is no more.

This reverts commit e3fb4d3d.
Reviewed-by: NRich Salz <rsalz@openssl.org>

This is a skin deep change, which simply renames most places where we talk
about curves in a TLS context to groups. This is because TLS1.3 has renamed
the extension, and it can now include DH groups too. We still only support
curves, but this rename should pave the way for a future extension for DH
groups.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1889)

Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1889)

Very simply, support having the .a extension to denote depending on
static libraries.  Note that this is not supported on native Windows
when building shared libraries, as there is not static library then,
just an import library with the same name.
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1889)

Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1890)

Instead of enumerating exactly those files in test/ that include
../ssl/ssl_locl.h, assume they all do.
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1891)

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>