We already did this on an ad-hoc per extension basis (for some extensions).
This centralises it and makes sure we do it for all extensions.
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3418)

Notifications can be (and should be) configured on account basis on
the CI web site.  This avoids getting emails to openssl-commits for
personal accounts that also build OpenSSL stuff.
Reviewed-by: NMatt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3484)

An alert message is 2 bytes long. In theory it is permissible in SSLv3 -
TLSv1.2 to fragment such alerts across multiple records (some of which
could be empty). In practice it make no sense to send an empty alert
record, or to fragment one. TLSv1.3 prohibts this altogether and other
libraries (BoringSSL, NSS) do not support this at all. Supporting it adds
significant complexity to the record layer, and its removal is unlikely
to cause inter-operability issues.

The DTLS code for this never worked anyway and it is not supported at a
protocol level for DTLS. Similarly fragmented DTLS handshake records only
work at a protocol level where at least the handshake message header
exists within the record. DTLS code existed for trying to handle fragmented
handshake records smaller than this size. This code didn't work either so
has also been removed.
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3476)

Allow multiple file arguments.
Split bntests.txt into separate files.
Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3471)

Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3442)

Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3442)

Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3442)

Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3469)

Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3468)

[extended tests]
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3393)

Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3393)

Suppose OPENSSL_USE_NODELETE (via Nick Reilly)
Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3399)

Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3399)

Reviewed-by: NStephen Henson <steve@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3454)

Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3439)

Reviewed-by: NStephen Henson <steve@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3452)

The assembler already knows the actual path to the generated file and,
in other perlasm architectures, is left to manage debug symbols itself.
Notably, in OpenSSL 1.1.x's new build system, which allows a separate
build directory, converting .pl to .s as the scripts currently do result
in the wrong paths.

This also avoids inconsistencies from some of the files using $0 and
some passing in the filename.
Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NAndy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3431)

Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3443)

Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3443)

Issue 1:

sh.bittable_size is a size_t but i is and int, which can result in
freelist == -1 if sh.bittable_size exceeds an int.

This seems to result in an OPENSSL_assert due to invalid allocation
size, so maybe that is "ok."

Worse, if sh.bittable_size is exactly 1<<31, then this becomes an
infinite loop (because 1<<31 is a negative int, so it can be shifted
right forever and sticks at -1).

Issue 2:

CRYPTO_secure_malloc_init() sets secure_mem_initialized=1 even when
sh_init() returns 0.

If sh_init() fails, we end up with secure_mem_initialized=1 but
sh.minsize=0. If you then call secure_malloc(), which then calls,
sh_malloc(), this then enters an infite loop since 0 << anything will
never be larger than size.

Issue 3:

That same sh_malloc loop will loop forever for a size greater
than size_t/2 because i will proceed (assuming sh.minsize=16):
i=16, 32, 64, ..., size_t/8, size_t/4, size_t/2, 0, 0, 0, 0, ....
This sequence will never be larger than "size".
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3449)

BIO_socket_ioctl is only implemented on VMS for VMS version 7.0 and
up, but since we only support version 7.1 and up, there's no need to
check the VMS version.
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3448)

Not exactly everywhere, but in those source files where stdint.h is
included conditionally, or where it will be eventually
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3447)

In some cases, testutil outputs subtests like this:

    1..6 # Subtest: progname

The standard set by Test::More (because there really is no actual
standard yet) gives this display:

    # Subtest: progname
    1..6

Until the standard is actually agreed upon, let's do it like
Test::More.
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3446)

Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3445)

Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3445)

- Mostly missing fall thru comments
- And uninitialized value used in sslapitest.c
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3440)

Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3441)

Add file/line# to test error message.
Also remove expected/got fields since TEST structure prints them.
Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3324)

Report test detail error.
Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3324)

Also, allow multiple files on commandline (for future splitup of
evptests.txt)
Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3324)

Allow conversion of existing requests to certificates again.
Fixes the issue #3396
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3437)

The second BN_is_zero test can never be true.
Reviewed-by: NAndy Polyakov <appro@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3434)

Reviewed-by: NTim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3436)

Reviewed-by: NTim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3436)

Only applies if we're not doing psk.
Reviewed-by: NTim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3436)

We abort if we read a message like this.
Reviewed-by: NTim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3436)

We should be validating that.
Reviewed-by: NTim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3436)

Reviewed-by: NTim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3436)

Previously we sent a decode_error alert.
Reviewed-by: NTim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3436)

Reviewed-by: NTim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3436)