- 06 7月, 2015 1 次提交
-
-
由 Dr. Stephen Henson 提交于
In CCM mode don't require a tag before initialising decrypt: this allows the tag length to be set without requiring the tag. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 29 6月, 2015 2 次提交
-
-
由 Kurt Roeckx 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Kurt Roeckx 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 25 6月, 2015 1 次提交
-
-
由 Dr. Stephen Henson 提交于
PR#3923 Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 24 6月, 2015 2 次提交
-
-
由 Rich Salz 提交于
Move #include's inside the #ifdef. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Rich Salz 提交于
Add secure heap for storage of private keys (when possible). Add BIO_s_secmem(), CBIGNUM, etc. Add BIO_CTX_secure_new so all BIGNUM's in the context are secure. Contributed by Akamai Technologies under the Corporate CLA. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 23 6月, 2015 3 次提交
-
-
由 Rich Salz 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
A small rearrangement so the inclusion of rsaz_exp.h would be unconditional, but what that header defines becomes conditional. This solves the weirdness where rsaz_exp.h gets in and out of the dependency list for bn_exp.c, depending on the present architecture. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 22 6月, 2015 10 次提交
-
-
由 Rich Salz 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
Since [sc]_ssl->[rw]bio aren't available, do not try to fiddle with them. Surely, a BIO_free on the "main" BIOs should be enough Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
Construct bio_err and bio_stdout from file handles instead of FILE pointers, since the latter might not be implemented (when OPENSSL_NO_STDIO is defined). Convert all output to use BIO_printf. Change lh_foo to lh_SSL_SESSION_foo. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 16 6月, 2015 1 次提交
-
-
由 Richard Levitte 提交于
Reviewed-by: NKurt Roeckx <kurt@openssl.org>
-
- 13 6月, 2015 1 次提交
-
-
由 Dr. Stephen Henson 提交于
PR#3904 Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 12 6月, 2015 1 次提交
-
-
由 Matt Caswell 提交于
Recent HMAC changes broke ABI compatibility due to a new field in HMAC_CTX. This backs that change out, and does it a different way. Thanks to Timo Teras for the concept. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 11 6月, 2015 5 次提交
-
-
由 Andy Polyakov 提交于
CVE-2015-1788 Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Emilia Kasper 提交于
CVE-2015-1790 Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Emilia Kasper 提交于
Also tighten X509_cmp_time to reject more than three fractional seconds in the time; and to reject trailing garbage after the offset. CVE-2015-1789 Reviewed-by: NViktor Dukhovni <viktor@openssl.org> Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Andy Polyakov 提交于
Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Andy Polyakov 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 10 6月, 2015 7 次提交
-
-
由 Matt Caswell 提交于
In the event of an error in the HMAC function, leaks can occur because the HMAC_CTX does not get cleaned up. Thanks to the BoringSSL project for reporting this issue. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
The function EC_POINT_is_on_curve does not return a boolean value. It returns 1 if the point is on the curve, 0 if it is not, and -1 on error. Many usages within OpenSSL were incorrectly using this function and therefore not correctly handling error conditions. With thanks to the Open Crypto Audit Project for reporting this issue. Reviewed-by: NKurt Roeckx <kurt@openssl.org>
-
由 Matt Caswell 提交于
The return type of BIO_number_read() and BIO_number_written() as well as the corresponding num_read and num_write members in the BIO structure has been changed from unsigned long to uint64_t. On platforms where an unsigned long is 32 bits (e.g. Windows) these counters could overflow if >4Gb is transferred. With thanks to the Open Crypto Audit Project for reporting this issue. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
This fixes a memory leak that can occur whilst duplicating a BIO chain if the call to CRYPTO_dup_ex_data() fails. It also fixes a second memory leak where if a failure occurs after successfully creating the first BIO in the chain, then the beginning of the new chain was not freed. With thanks to the Open Crypto Audit Project for reporting this issue. Reviewed-by: NStephen Henson <steve@openssl.org>
-
由 Matt Caswell 提交于
BUF_MEM_free() attempts to cleanse memory using memset immediately prior to a free. This is at risk of being optimised away by the compiler, so replace with a call to OPENSSL_clear_free() instead. With thanks to the Open Crypto Audit Project for reporting this issue. Reviewed-by: NStephen Henson <steve@openssl.org>
-
由 Rich Salz 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Rich Salz 提交于
Also removed a source file that isn't built, and moved another one to test for eventual fixing. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 09 6月, 2015 2 次提交
-
-
由 Kurt Roeckx 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org> MR #588
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 08 6月, 2015 1 次提交
-
-
由 Emilia Kasper 提交于
Pointed out by Victor Vasiliev (vasilvv@mit.edu) via Adam Langley (Google). Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 06 6月, 2015 1 次提交
-
-
由 Dr. Stephen Henson 提交于
Check return value when calling ASN1_INTEGER_get to retrieve a certificate serial number. If an error occurs (which will be caused by the value being out of range) revert to hex dump of serial number. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 05 6月, 2015 1 次提交
-
-
由 Rich Salz 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 04 6月, 2015 1 次提交
-
-
由 Rich Salz 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-