Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

This gets EC_GROUP_clear_free EC_GROUP_free, EC_KEY_free,
EC_POINT_clear_free, EC_POINT_free
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

The recent updates to libssl to enforce stricter return code checking, left
a small number of instances behind where return codes were being swallowed
(typically because the function they were being called from was declared as
void). This commit fixes those instances to handle the return codes more
appropriately.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

This commit handles BIO_ACCEPT_free BIO_CB_FREE BIO_CONNECT_free
BIO_free BIO_free_all BIO_vfree
Reviewed-by: NMatt Caswell <matt@openssl.org>

Support loading of key and certificate from the same file if
SSL_CONF_FLAG_REQUIRE_PRIVATE is set. This is done by remembering the
filename used for each certificate type and attempting to load a private
key from the file when SSL_CONF_CTX_finish is called.

Update docs.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

This commit sets the value of SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG to
zero.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Ensure RAND_bytes return value is checked correctly, and that we no longer
use RAND_pseudo_bytes.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

In ssl3_send_new_session_ticket the message to be sent is constructed. We
skip adding the length of the session ticket initially, then call
ssl_set_handshake_header, and finally go back and add in the length of the
ticket. Unfortunately, in DTLS, ssl_set_handshake_header also has the side
effect of buffering the message for subsequent retransmission if required.
By adding the ticket length after the call to ssl_set_handshake_header the
message that is buffered is incomplete, causing an invalid message to be
sent on retransmission.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

In DTLS, immediately prior to epoch change, the write_sequence is supposed
to be stored in s->d1->last_write_sequence. The write_sequence is then reset
back to 00000000. In the event of retransmits of records from the previous
epoch, the last_write_sequence is restored. This commit fixes a bug in
DTLS1.2 where the write_sequence was being reset before last_write_sequence
was saved, and therefore retransmits are sent with incorrect sequence
numbers.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Start ensuring all OpenSSL "free" routines allow NULL, and remove
any if check before calling them.
This gets DH_free, DSA_free, RSA_free
Reviewed-by: NMatt Caswell <matt@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>

It was saying that it was an illegal parameter / unsupported cipher
Reviewed-by: NMatt Caswell <matt@openssl.org>

The certificate already contains the DH parameters in that case.
ssl3_send_server_key_exchange() would fail in that case anyway.
Reviewed-by: NMatt Caswell <matt@openssl.org>

Also removes for it being NULL
Reviewed-by: NMatt Caswell <matt@openssl.org>

Fix missing return value check in dtls1_listen when calling SSL_clear().
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Change ssl_set_handshake_header from return void to returning int, and
handle error return code appropriately.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Ensure that all functions have their return values checked where
appropriate. This covers all functions defined and called from within
libssl.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Mark most functions returning a result defined in any libssl header file
with __owur to warn if they are used without checking the return value.
Use -DUNUSED_RETURN compiler flag with gcc to activate these warnings.
Some functions returning a result are skipped if it is common and valid to
use these functions without checking the return value.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Don't check that the curve appears in the list of acceptable curves for the
peer, if they didn't send us such a list (RFC 4492 does not require that the
extension be sent).
Reviewed-by: NEmilia Käsper <emilia@openssl.org>

Reviewed-by: NEmilia Käsper <emilia@openssl.org>

Reviewed-by: NEmilia Käsper <emilia@openssl.org>

If client auth is used then a server can seg fault in the event of a DHE
cipher being used and a zero length ClientKeyExchange message being sent
by the client. This could be exploited in a DoS attack.

CVE-2015-1787
Reviewed-by: NRichard Levitte <levitte@openssl.org>

If a client renegotiates using an invalid signature algorithms extension
it will crash a server with a NULL pointer dereference.

Thanks to David Ramos of Stanford University for reporting this bug.

CVE-2015-0291
Reviewed-by: NTim Hudson <tjh@openssl.org>

The DTLSv1_listen function is intended to be stateless and processes
the initial ClientHello from many peers. It is common for user code to
loop over the call to DTLSv1_listen until a valid ClientHello is received
with an associated cookie. A defect in the implementation of DTLSv1_listen
means that state is preserved in the SSL object from one invokation to the
next that can lead to a segmentation fault. Erorrs processing the initial
ClientHello can trigger this scenario. An example of such an error could
be that a DTLS1.0 only client is attempting to connect to a DTLS1.2 only
server.

CVE-2015-0207
Reviewed-by: NRichard Levitte <levitte@openssl.org>

OpenSSL 1.0.2 introduced the "multiblock" performance improvement. This
feature only applies on 64 bit x86 architecture platforms that support AES
NI instructions. A defect in the implementation of "multiblock" can cause
OpenSSL's internal write buffer to become incorrectly set to NULL when
using non-blocking IO. Typically, when the user application is using a
socket BIO for writing, this will only result in a failed connection.
However if some other BIO is used then it is likely that a segmentation
fault will be triggered, thus enabling a potential DoS attack.

CVE-2015-0290
Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NAndy Polyakov <appro@openssl.org>

The function tls1_PRF counts the number of digests in use and partitions
security evenly between them. There always needs to be at least one digest
in use, otherwise this is an internal error. Add a sanity check for this.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Missed one file in the #ifdef merge; thanks Kurt.
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

It created the cert structure in SSL_CTX or SSL if it was NULL, but they can
never be NULL as the comments already said.
Reviewed-by: NDr. Stephen Henson <steve@openssl.org>

If SSL_check_chain is called with a NULL X509 object or a NULL EVP_PKEY
or the type of the public key is unrecognised then the local variable
|cpk| in tls1_check_chain does not get initialised. Subsequently an
attempt is made to deref it (after the "end" label), and a seg fault will
result.
Reviewed-by: NDr. Stephen Henson <steve@openssl.org>

[and respect error return value in ssltest.c]
Reviewed-by: NMatt Caswell <matt@openssl.org>

Suggested by John Foley <foleyj@cisco.com>.
Reviewed-by: NMatt Caswell <matt@openssl.org>

Cleanse various intermediate buffers used by the PRF.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Ensure all malloc failures return -1.

Reported by Adam Langley (Google).
Reviewed-by: NMatt Caswell <matt@openssl.org>