- 25 4月, 2017 2 次提交
-
-
由 Matt Caswell 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3286)
-
由 Matt Caswell 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3286)
-
- 04 4月, 2017 1 次提交
-
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3015)
-
- 28 2月, 2017 1 次提交
-
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/2775)
-
- 22 2月, 2017 1 次提交
-
-
由 Dmitry Belyavskiy 提交于
commands. Reviewed-by: NRichard Levitte <levitte@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/2695)
-
- 08 2月, 2017 1 次提交
-
-
由 Peter Wu 提交于
The server and client demos (s_client and s_server) are extended with a -keylogfile option. This is similar as setting the SSLKEYLOGFILE environment variable for NSS and creates a keylog file which is suitable for Wireshark. Reviewed-by: NMatt Caswell <matt@openssl.org> Reviewed-by: NRichard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/2343)
-
- 10 11月, 2016 1 次提交
-
-
由 Matt Caswell 提交于
This is a skin deep change, which simply renames most places where we talk about curves in a TLS context to groups. This is because TLS1.3 has renamed the extension, and it can now include DH groups too. We still only support curves, but this rename should pave the way for a future extension for DH groups. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 18 5月, 2016 1 次提交
-
-
由 Rich Salz 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org> Reviewed-by: NKurt Roeckx <kurt@openssl.org>
-
- 18 3月, 2016 1 次提交
-
-
由 Rich Salz 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 23 2月, 2016 1 次提交
-
-
由 Rich Salz 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 17 2月, 2016 1 次提交
-
-
由 Rich Salz 提交于
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
- 09 2月, 2016 1 次提交
-
-
由 Viktor Dukhovni 提交于
As documented both SSL_get0_dane_authority() and SSL_get0_dane_tlsa() are expected to return a negative match depth and nothing else when verification fails. However, this only happened when verification failed during chain construction. Errors in verification of the constructed chain did not have the intended effect on these functions. This commit updates the functions to check for verify_result == X509_V_OK, and no longer erases any accumulated match information when chain construction fails. Sophisticated developers can, with care, use SSL_set_verify_result(ssl, X509_V_OK) to "peek" at TLSA info even when verification fail. They must of course first check and save the real error, and restore the original error as quickly as possible. Hiding by default seems to be the safer interface. Introduced X509_V_ERR_DANE_NO_MATCH code to signal failure to find matching TLSA records. Previously reported via X509_V_ERR_CERT_UNTRUSTED. This also changes the "-brief" output from s_client to include verification results and TLSA match information. Mentioned session resumption in code example in SSL_CTX_dane_enable(3). Also mentioned that depths returned are relative to the verified chain which is now available via SSL_get0_verified_chain(3). Added a few more test-cases to danetest, that exercise the new code. Resolved thread safety issue in use of static buffer in X509_verify_cert_error_string(). Fixed long-stating issue in apps/s_cb.c which always sets verify_error to either X509_V_OK or "chain to long", code elsewhere (e.g. s_time.c), seems to expect the actual error. [ The new chain construction code is expected to correctly generate "chain too long" errors, so at some point we need to drop the work-arounds, once SSL_set_verify_depth() is also fixed to propagate the depth to X509_STORE_CTX reliably. ] Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 04 2月, 2016 1 次提交
-
-
由 Richard Levitte 提交于
s_socket.c gets brutally cleaned out and now consists of only two functions, one for client and the other for server. They both handle AF_INET, AF_INET6 and additionally AF_UNIX where supported. The rest is just easy adaptation. Both s_client and s_server get the new flags -4 and -6 to force the use of IPv4 or IPv6 only. Also, the default host "localhost" in s_client is removed. It's not certain that this host is set up for both IPv4 and IPv6. For example, Debian has "ip6-localhost" as the default hostname for [::1]. The better way is to default |host| to NULL and rely on BIO_lookup() to return a BIO_ADDRINFO with the appropriate loopback address for IPv4 or IPv6 as indicated by the |family| parameter. Reviewed-by: NKurt Roeckx <kurt@openssl.org>
-
- 01 2月, 2016 1 次提交
-
-
由 Emilia Kasper 提交于
PACKET contents should be read-only. To achieve this, also - constify two user callbacks - constify BUF_reverse. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 27 1月, 2016 1 次提交
-
-
由 Rich Salz 提交于
This was done by the following find . -name '*.[ch]' | /tmp/pl where /tmp/pl is the following three-line script: print unless $. == 1 && m@/\* .*\.[ch] \*/@; close ARGV if eof; # Close file to reset $. And then some hand-editing of other files. Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
- 15 12月, 2015 1 次提交
-
-
由 Matt Caswell 提交于
s_server was trying to set the ECDH curve when no-ec was defined. This also highlighted the fact that the -no_ecdhe option to s_server is broken, and doesn't make any sense any more (ECDHE is on by default and the only way it can be disabled is through the cipherstring). Therefore this commit removes the option. Reviewed-by: NKurt Roeckx <kurt@openssl.org>
-
- 09 10月, 2015 1 次提交
-
-
由 Emilia Kasper 提交于
Note that this commit constifies a user callback parameter and therefore will break compilation for applications using this callback. But unless they are abusing write access to the buffer, the fix is trivial. Reviewed-by: NAndy Polyakov <appro@openssl.org>
-
- 06 5月, 2015 1 次提交
-
-
由 Rich Salz 提交于
Just as with the OPENSSL_malloc calls, consistently use sizeof(*ptr) for memset and memcpy. Remove needless casts for those functions. For memset, replace alternative forms of zero with 0. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 29 4月, 2015 1 次提交
-
-
由 Rich Salz 提交于
Many functions had a BIO* parameter, and it was always called with bio_err. Remove the param and just use bio_err. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 25 4月, 2015 1 次提交
-
-
由 Rich Salz 提交于
This is merges the old "rsalz-monolith" branch over to master. The biggest change is that option parsing switch from cascasding 'else if strcmp("-foo")' to a utility routine and somethin akin to getopt. Also, an error in the command line no longer prints the full summary; use -help (or --help :) for that. There have been many other changes and code-cleanup, see bullet list below. Special thanks to Matt for the long and detailed code review. TEMPORARY: For now, comment out CRYPTO_mem_leaks() at end of main Tickets closed: RT3515: Use 3DES in pkcs12 if built with no-rc2 RT1766: s_client -reconnect and -starttls broke RT2932: Catch write errors RT2604: port should be 'unsigned short' RT2983: total_bytes undeclared #ifdef RENEG RT1523: Add -nocert to fix output in x509 app RT3508: Remove unused variable introduced by b09eb246 RT3511: doc fix; req default serial is random RT1325,2973: Add more extensions to c_rehash RT2119,3407: Updated to dgst.pod RT2379: Additional typo fix RT2693: Extra include of string.h RT2880: HFS is case-insensitive filenames RT3246: req command prints version number wrong Other changes; incompatibilities marked with *: Add SCSV support Add -misalign to speed command Make dhparam, dsaparam, ecparam, x509 output C in proper style Make some internal ocsp.c functions void Only display cert usages with -help in verify Use global bio_err, remove "BIO*err" parameter from functions For filenames, - always means stdin (or stdout as appropriate) Add aliases for -des/aes "wrap" ciphers. *Remove support for IISSGC (server gated crypto) *The undocumented OCSP -header flag is now "-header name=value" *Documented the OCSP -header flag Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 22 1月, 2015 2 次提交
-
-
由 Matt Caswell 提交于
Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Matt Caswell 提交于
Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 13 1月, 2015 1 次提交
-
-
由 Rich Salz 提交于
This last one for this ticket. Removes WIN16. So long, MS_CALLBACK and MS_FAR. We won't miss you. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 09 5月, 2014 1 次提交
-
-
由 Geoff Thorpe 提交于
The "-unix <path>" argument allows s_server and s_client to use a unix domain socket in the filesystem instead of IPv4 ("-connect", "-port", "-accept", etc). If s_server exits gracefully, such as when "-naccept" is used and the requested number of SSL/TLS connections have occurred, then the domain socket file is removed. On ctrl-C, it is likely that the stale socket file will be left over, such that s_server would normally fail to restart with the same arguments. For this reason, s_server also supports an "-unlink" option, which will clean up any stale socket file before starting. If you have any reason to want encrypted IPC within an O/S instance, this concept might come in handy. Otherwise it just demonstrates that there is nothing about SSL/TLS that limits it to TCP/IP in any way. (There might also be benchmarking and profiling use in this path, as unix domain sockets are much lower overhead than connecting over local IP addresses). Signed-off-by: NGeoff Thorpe <geoff@openssl.org>
-
- 26 4月, 2014 1 次提交
-
-
由 Geoff Thorpe 提交于
There are certainly many more constifiable strings in the various interfaces, which I hope to get to eventually. Signed-off-by: NGeoff Thorpe <geoff@openssl.org>
-
- 28 3月, 2014 1 次提交
-
-
由 Dr. Stephen Henson 提交于
Add a debugging security callback option to s_client/s_server. This will print out each security parameter as it is accepted or rejected.
-
- 06 9月, 2013 1 次提交
-
-
由 Scott Deboy 提交于
Add callbacks supporting generation and retrieval of supplemental data entries, facilitating RFC 5878 (TLS auth extensions) Removed prior audit proof logic - audit proof support was implemented using the generic TLS extension API Tests exercising the new supplemental data registration and callback api can be found in ssltest.c. Implemented changes to s_server and s_client to exercise supplemental data callbacks via the -auth argument, as well as additional flags to exercise supplemental data being sent only during renegotiation.
-
- 26 3月, 2013 1 次提交
-
-
由 Dr. Stephen Henson 提交于
Add correct flags for DTLS 1.2, update s_server and s_client to handle DTLS 1.2 methods. Currently no support for version negotiation: i.e. if client/server selects DTLS 1.2 it is that or nothing.
-
- 30 12月, 2012 1 次提交
-
-
由 Dr. Stephen Henson 提交于
-
- 07 12月, 2012 2 次提交
-
-
由 Dr. Stephen Henson 提交于
Just a sample, real world applications would have to be cleverer.
-
由 Dr. Stephen Henson 提交于
-
- 03 12月, 2012 1 次提交
-
-
由 Dr. Stephen Henson 提交于
-
- 24 11月, 2012 1 次提交
-
-
由 Dr. Stephen Henson 提交于
Add support for separate verify and chain stores in s_client.
-
- 22 11月, 2012 2 次提交
-
-
由 Dr. Stephen Henson 提交于
-
由 Dr. Stephen Henson 提交于
-
- 18 11月, 2012 1 次提交
-
-
由 Dr. Stephen Henson 提交于
-
- 17 11月, 2012 1 次提交
-
-
由 Dr. Stephen Henson 提交于
to the SSL_CONF APIs. This is complicated a little because the SSL_CTX structure is not available when the command line is processed: so just check syntax of commands initially and store them, ready to apply later.
-
- 08 10月, 2012 1 次提交
-
-
由 Dr. Stephen Henson 提交于
certificate. Add options to s_client, s_server and x509 utilities to print results of checks.
-
- 13 9月, 2012 1 次提交
-
-
由 Dr. Stephen Henson 提交于
New option -verify_quiet to shut up the verify callback unless there is an error.
-
- 08 9月, 2012 1 次提交
-
-
由 Dr. Stephen Henson 提交于
new ctrl to retrive value of received temporary key in server key exchange message, print out details in s_client
-