Provide some man pages for auto-init/deinit. Also update the INSTALL
documentation for information on the new Configure options implemented as
part of this.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

This option disables automatic loading of the crypto/ssl error strings in
order to keep statically linked executable file size down
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Add the OPENSSL_INIT_thread_stop() function.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Remove the need to explicitly initialise/deinitialise for the tests
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Clean up the apps so that we make use of the new auto-init/de-init feature.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Building on the pervious commit to auto initialise and de-initialise libssl
Reviewed-by: NRichard Levitte <levitte@openssl.org>

This builds on the previous commit to auto initialise/deinitialise
libcrypto.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

This commit provides the basis and core code for an auto initialisation
and deinitialisation framework for libcrypto and libssl. The intention is
to remove the need (in many circumstances) to call explicit initialise and
deinitialise functions. Explicit initialisation will still be an option,
and if non-default initialisation is needed then it will be required.
Similarly for de-initialisation (although this will be a lot easier since
it will bring all de-initialisation into a single function).
Reviewed-by: NRichard Levitte <levitte@openssl.org>

The previous fix wasn't complete, it was missing a 'use OpenSSL::Test::Utils'
Reviewed-by: NMatt Caswell <matt@openssl.org>

It seems realpath() is quite buggy on VMS, or will at least give quite
surprising results.  On the other hand, realpath() is the better on
Unix to clean out clutter like foo/../bar on Unix.

So we make out own function to get the absolute directory for a given
input, and use rel2abs() or realpath() depending on the platform
Configure runs on.

Issue reported by Steven M. Schweda <sms@antinode.info>
Reviewed-by: NAndy Polyakov <appro@openssl.org>

Reviewed-by: NAndy Polyakov <appro@openssl.org>

To be able to run tests when we've built in a directory other than
the source tree, the testing framework needs a few adjustments.

test/testlib/OpenSSL/Test.pm needs to know where it can find
shlib_wrap.sh, and a number of other tests need to be told a different
place to find engines than what they may be able to figure out on
their own.  Relying to $TOP is not enough, $SRCTOP and $BLDTOP can be
used as an alternative.

As part of this change, top_file and top_dir are removed and
srctop_file, bldtop_file, srctop_dir and bldtop_dir take their place.
Reviewed-by: NBen Laurie <ben@openssl.org>

util/mkdef.pl and Makefile.shared needs to know about the source and
the build directories.

Additionally, Makefile.shared needs to know how to build shared
libraries in a directory other than the current one.
Reviewed-by: NBen Laurie <ben@openssl.org>

This documents describes the three steps from build.info files via the
%unified_info database to the build-file templates, along with some
examples showing how the data gets processed along the way.
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

common.tmpl will be used together with the template build file, and is
the engine that connects the information gathered from all the
build.info files with making the build file itself.

This file expects there to be a template section in the build file
template that defines a number perl functions designed to return
strings with appropriate lines for the build system at hand.  The
exact functions, what they can expect as arguments and what output
they're expected to produce is documented in Configurations/README.
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

- One typo fixed in crypto/bio/b_addr.c
- Add a comment in doc/crypto/BIO_parse_hostserv.pod to explain the
  blank lines with one lonely space each.
Reviewed-by: NAndy Polyakov <appro@openssl.org>

Reviewed-by: NTim Hudson <tjh@openssl.org>

As documented both SSL_get0_dane_authority() and SSL_get0_dane_tlsa()
are expected to return a negative match depth and nothing else when
verification fails.  However, this only happened when verification
failed during chain construction.  Errors in verification of the
constructed chain did not have the intended effect on these functions.

This commit updates the functions to check for verify_result ==
X509_V_OK, and no longer erases any accumulated match information
when chain construction fails.  Sophisticated developers can, with
care, use SSL_set_verify_result(ssl, X509_V_OK) to "peek" at TLSA
info even when verification fail.  They must of course first check
and save the real error, and restore the original error as quickly
as possible.  Hiding by default seems to be the safer interface.

Introduced X509_V_ERR_DANE_NO_MATCH code to signal failure to find
matching TLSA records.  Previously reported via X509_V_ERR_CERT_UNTRUSTED.

This also changes the "-brief" output from s_client to include
verification results and TLSA match information.

Mentioned session resumption in code example in SSL_CTX_dane_enable(3).
Also mentioned that depths returned are relative to the verified chain
which is now available via SSL_get0_verified_chain(3).

Added a few more test-cases to danetest, that exercise the new
code.

Resolved thread safety issue in use of static buffer in
X509_verify_cert_error_string().

Fixed long-stating issue in apps/s_cb.c which always sets verify_error
to either X509_V_OK or "chain to long", code elsewhere (e.g.
s_time.c), seems to expect the actual error.  [ The new chain
construction code is expected to correctly generate "chain
too long" errors, so at some point we need to drop the
work-arounds, once SSL_set_verify_depth() is also fixed to
propagate the depth to X509_STORE_CTX reliably. ]
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NStephen Henson <steve@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Move all PKCS12_SAFEBAG functions into new file p12_sbag.c.

Move MAC functions into p12_mutl.c
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Rename ancient PKCS12 functions to use more logical names. Include
defines from old to new name.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Deprecate undocumented SSL_cache_hit(). Make SSL_session_reused() into a
real function.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Don't cast malloc-family return values.
Also found some places where (a) blank line was missing; and (b)
the *wrong* return value was checked.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Just like File::Path::make_path, File::Path::remove_tree didn't show
up before File::Path 2.06 / perl v5.10.1, so we prefer the legacy
function here as well.
Reviewed-by: NAndy Polyakov <appro@openssl.org>

File::Path::make_path didn't show up before File::Path 2.06 / perl v5.10.1.
Because we're trying to stay compatible with perl v5.10.0 and up,
it's better to use the legacy interface.
Reviewed-by: NAndy Polyakov <appro@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>