- 20 1月, 2016 1 次提交
-
-
由 Matt Caswell 提交于
Calling SSL_shutdown while in init previously gave a "1" response, meaning everything was successfully closed down (even though it wasn't). Better is to send our close_notify, but fail when trying to receive one. The problem with doing a shutdown while in the middle of a handshake is that once our close_notify is sent we shouldn't really do anything else (including process handshake/CCS messages) until we've received a close_notify back from the peer. However the peer might send a CCS before acting on our close_notify - so we won't be able to read it because we're not acting on CCS messages! Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
- 17 1月, 2016 1 次提交
-
-
由 Viktor Dukhovni 提交于
Also report an SSL_dane_enable error when the basedomain is an invalid SNI name. Avoid side-effects when such a name is valid with X509_VERIFY_PARAM_set1_host(), as e.g. with an empty name, by setting the SNI name first. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 15 1月, 2016 2 次提交
-
-
由 Rich Salz 提交于
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
由 Rich Salz 提交于
It turns out that -pause calls the undocumented function SSL_set_debug. That just sets flag inside the SSL structure. That flag, despite the command is never used. So remove the flag, the field, and the function. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 12 1月, 2016 2 次提交
-
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 11 1月, 2016 1 次提交
-
-
由 Viktor Dukhovni 提交于
These now take and return unsigned long, and get is constified. Updated related documentation and util/ssleay.num Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 08 1月, 2016 1 次提交
-
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 06 1月, 2016 1 次提交
-
-
由 Viktor Dukhovni 提交于
Also tweak some of the code in demos/bio, to enable interactive testing of BIO_s_accept's use of SSL_dup. Changed the sconnect client to authenticate the server, which now exercises the new SSL_set1_host() function. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 02 1月, 2016 2 次提交
-
-
由 Viktor Dukhovni 提交于
The protocol selection code is now consolidated in a few consecutive short functions in a single file and is table driven. Protocol-specific constraints that influence negotiation are moved into the flags field of the method structure. The same protocol version constraints are now applied in all code paths. It is now much easier to add new protocol versions without reworking the protocol selection logic. In the presence of "holes" in the list of enabled client protocols we no longer select client protocols below the hole based on a subset of the constraints and then fail shortly after when it is found that these don't meet the remaining constraints (suiteb, FIPS, security level, ...). Ideally, with the new min/max controls users will be less likely to create "holes" in the first place. Reviewed-by: NKurt Roeckx <kurt@openssl.org>
-
由 Kurt Roeckx 提交于
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
- 20 12月, 2015 1 次提交
-
-
由 Dr. Stephen Henson 提交于
Remove all fixed DH ciphersuites and associated logic. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 17 12月, 2015 1 次提交
-
-
由 Rich Salz 提交于
Rename BUF_{strdup,strlcat,strlcpy,memdup,strndup,strnlen} to OPENSSL_{strdup,strlcat,strlcpy,memdup,strndup,strnlen} Add #define's for the old names. Add CRYPTO_{memdup,strndup}, called by OPENSSL_{memdup,strndup} macros. Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 10 12月, 2015 1 次提交
-
-
由 Richard Levitte 提交于
Reviewed-by: NStephen Henson <steve@openssl.org>
-
- 08 12月, 2015 2 次提交
-
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 06 12月, 2015 1 次提交
-
-
由 Kurt Roeckx 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org> MR: #364
-
- 05 12月, 2015 3 次提交
-
-
由 Kurt Roeckx 提交于
Reviewed-by: NDr. Stephen Henson <steve@openssl.org>
-
由 Kurt Roeckx 提交于
SSL_{CTX}_set_tmp_ecdh() allows to set 1 EC curve and then tries to use it. On the other hand SSL_{CTX_}set1_curves() allows you to set a list of curves, but only when SSL_{CTX_}set_ecdh_auto() was called to turn it on. Reviewed-by: NDr. Stephen Henson <steve@openssl.org>
-
由 Kurt Roeckx 提交于
This only gets used to set a specific curve without actually checking that the peer supports it or not and can therefor result in handshake failures that can be avoided by selecting a different cipher. Reviewed-by: NDr. Stephen Henson <steve@openssl.org>
-
- 02 12月, 2015 1 次提交
-
-
由 Rich Salz 提交于
Add CRYPTO_free_ex_index (for shared libraries) Unify and complete the documentation for all "ex_data" API's and objects. Replace xxx_get_ex_new_index functions with a macro. Added an exdata test. Renamed the ex_data internal datatypes. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 28 11月, 2015 2 次提交
-
-
由 Dr. Stephen Henson 提交于
Change handshake hash array into a single digest context simplifying the handhake hash code. Use EVP_md5_sha1() if needed for handshake hashes in TLS 1.1 and earlier. Simplify PRF code to also use a single digest and treat EVP_md5_sha1() as a special case. Modify algorithm2 field of ciphers to use a single index value for handshake hash and PRF instead of a bitmap. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Matt Caswell 提交于
Various updates following feedback from the recent commit of the new GOST2012 code. Reviewed-by: NAndy Polyakov <appro@openssl.org>
-
- 26 11月, 2015 1 次提交
-
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NAndy Polyakov <appro@openssl.org>
-
- 24 11月, 2015 1 次提交
-
-
由 Dmitry Belyavsky 提交于
This patch contains the necessary changes to provide GOST 2012 ciphersuites in TLS. It requires the use of an external GOST 2012 engine. Reviewed-by: NMatt Caswell <matt@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 21 11月, 2015 7 次提交
-
-
由 Matt Caswell 提交于
Make it clear that this function is ssl specific. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Matt Caswell 提交于
Tidy up the libssl async calls and make sure all IO functions are covered. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Matt Caswell 提交于
0 is a valid file descriptor so SSL_get_async_wait_fd should instead return -1 on error. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Matt Caswell 提交于
The ASYNC_in_job() function is redundant. The same effect can be achieved by using ASYNC_get_current_job(). Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Matt Caswell 提交于
Initial API implemented for notifying applications that an ASYNC_JOB has completed. Currently only s_server is using this. The Dummy Async engine "cheats" in that it notifies that it has completed *before* it pauses the job. A normal async engine would not do that. Only the posix version of this has been implemented so far, so it will probably fail to compile on Windows at the moment. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Matt Caswell 提交于
Removed the function ASYNC_job_is_waiting() as it was redundant. The only time user code has a handle on a job is when one is waiting, so all they need to do is check whether the job is NULL. Also did some cleanups to make sure the job really is NULL after it has been freed! Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Matt Caswell 提交于
The following entry points have been made async aware: SSL_accept SSL_read SSL_write Also added is a new mode - SSL_MODE_ASYNC. Calling the above functions with the async mode enabled will initiate a new async job. If an async pause is encountered whilst executing the job (such as for example if using SHA1/RSA with the Dummy Async engine), then the above functions return with SSL_WANT_ASYNC. Calling the functions again (with exactly the same args as per non-blocking IO), will resume the job where it left off. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 20 11月, 2015 1 次提交
-
-
由 Matt Caswell 提交于
There are lots of calls to EVP functions from within libssl There were various places where we should probably check the return value but don't. This adds these checks. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 11 11月, 2015 1 次提交
-
-
由 Matt Caswell 提交于
The new function SSL_use_certificate_chain_file was always crashing in the internal function use_certificate_chain_file because it would pass a NULL value for SSL_CTX *, but use_certificate_chain_file would unconditionally try to dereference it. Reviewed-by: NStephen Henson <steve@openssl.org>
-
- 10 11月, 2015 1 次提交
-
-
由 Matt Caswell 提交于
if we have a malloc |x = OPENSSL_malloc(...)| sometimes we check |x| for NULL and sometimes we treat it as a boolean |if(!x) ...|. Standardise the approach in libssl. Reviewed-by: NKurt Roeckx <kurt@openssl.org>
-
- 09 11月, 2015 1 次提交
-
-
由 Matt Caswell 提交于
The SSL object was being deref'd and then there was a later redundant check to see if it is NULL. We assume all SSL_foo functions pass a non NULL SSL object and do not check it. Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 08 11月, 2015 1 次提交
-
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NAndy Polyakov <appro@openssl.org>
-
- 30 10月, 2015 3 次提交
-
-
由 Matt Caswell 提交于
There were a few remaining references to SSLv2 support which are no longer relevant now that it has been removed. Reviewed-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
The SSL variable |in_handshake| seems misplaced. It would be better to have it in the STATEM structure. Reviewed-by: NTim Hudson <tjh@openssl.org> Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
The |no_cert_verify| should be in the state machine structure not in SSL Reviewed-by: NTim Hudson <tjh@openssl.org> Reviewed-by: NRichard Levitte <levitte@openssl.org>
-