This adds a couple of simple tests to see that SSL traffic using the
reimplemented BIO_s_accept() and BIO_s_connect() works as expected,
both on IPv4 and on IPv6.
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Future commits will change our use to newer functions and the pragmas
will go away at that time.
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Added functions:

BIO_socket
BIO_connect
BIO_listen
BIO_accept_ex
BIO_closesocket
BIO_sock_info

These get deprecated:

BIO_gethostbyname
BIO_get_port
BIO_get_host_ip
BIO_get_accept_socket
BIO_accept
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Because of the way bio_lcl.h is organised, we must not include
internal/cryptlib.h before it.  As a matter of fact, bio_lcl.h
includes internal/cryptlib.h on its own.
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Because different platforms have different levels of support for IPv6,
different kinds of sockaddr variants, and some have getaddrinfo et al
while others don't, we could end up with a mess if ifdefs, duplicate
code and other maintainance nightmares.

Instead, we're introducing wrappers around the common form for socket
communication:
BIO_ADDR, closely related to struct sockaddr and some of its variants.
BIO_ADDRINFO, closely related to struct addrinfo.

With that comes support routines, both convenient creators and
accessors, plus a few utility functions:

BIO_parse_hostserv, takes a string of the form host:service and
splits it into host and service.  It checks for * in both parts, and
converts any [ipv6-address] syntax to ust the IPv6 address.

BIO_lookup, looks up information on a host.

All routines handle IPv4 (AF_INET) and IPv6 (AF_INET6) addresses, and
there is support for local sockets (AF_UNIX) as well.
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Accept leading 0-byte in PKCS1 type 1 padding. Internally, the byte is
stripped by BN_bn2bin but external callers may have other expectations.

Reviewed-by: Kurt Roeckx<kurt@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

CRIME protection: disable compression by default, even if OpenSSL is
compiled with zlib enabled. Applications can still enable compression by
calling SSL_CTX_clear_options(ctx, SSL_OP_NO_COMPRESSION), or by using
the SSL_CONF library to configure compression. SSL_CONF continues to
work as before:

SSL_CONF_cmd(ctx, "Options", "Compression") enables compression.

SSL_CONF_cmd(ctx, "Options", "-Compression") disables compression (now
no-op by default).

The command-line switch has changed from -no_comp to -comp.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Also fix option processing in pkeyutl to allow use of (formerly)
"out-of-order" switches that were needless implementation limitations.

Handle documented "ENGINE" form with -keyform and -peerform.

Better handling of OPENSSL_NO_ENGINE and OPENSSL_NO_RSA.

RT2018
Reviewed-by: NRich Salz <rsalz@openssl.org>

... related to engine_ref_debug macro.
Signed-off-by: NRich Salz <rsalz@akamai.com>
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Reviewed-by: NDr. Stephen Henson <steve@openssl.org>

It turns out that the combination splitpath() could return an empty
string for the directory part.  This doesn't play well with catdir().
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Add new function BN_bn2binpad() which checks the length of the output
buffer and pads the result with zeroes if necessary.

New functions BN_bn2lebinpad() and BN_lebin2bn() which use little endian
format.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Signed-off-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NEmilia Käsper <emilia@openssl.org>

Remove ancient unused configuration file in crypto/conf.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NEmilia Käsper <emilia@openssl.org>

Signed-off-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NDr. Stephen Henson <steve@openssl.org>

PACKET contents should be read-only. To achieve this, also
- constify two user callbacks
- constify BUF_reverse.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NAndy Polyakov <appro@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Iteratively improved with Richard and Andy.
Reviewed-by: NAndy Polyakov <appro@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Signed-off-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NTim Hudson <tjh@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Nothing else will run the unified scheme for now.
Reviewed-by: NAndy Polyakov <appro@openssl.org>

Now that we have the foundation for the "unified" build scheme in
place, we add build.info files.  They have been generated from the
Makefiles in the same directories.  Things that are platform specific
will appear in later commits.
Reviewed-by: NAndy Polyakov <appro@openssl.org>

The "unified" build scheme revolves around small information files,
build.info, which each describe their own bit of everything that needs
to be built, using a mini-language described in Configurations/README.

The information in build.info file contain references to source files
and final result.  Object files are not mentioned at all, they are
simply from source files.  Because of this, all the *_obj items in
Configurations/*.conf are renamed to *_asm_src and the files listed
in the values are change from object files to their corresponding
source files.  For the sake of the other build schemes, Configure
generates corresponding *_obj entries in %target.

Furthermore, the "unified" build scheme supports having a build
directory tree separate from the source directry tree.

All paths in a build.info file is assumed to be relative to its
location, either within the source tree or within the build tree.
Reviewed-by: NAndy Polyakov <appro@openssl.org>

Reviewed-by: NDr. Stephen Henson <steve@openssl.org>

When auxiliary data contains only reject entries, continue to trust
self-signed objects just as when no auxiliary data is present.

This makes it possible to reject specific uses without changing
what's accepted (and thus overring the underlying EKU).

Added new supported certs and doubled test count from 38 to 76.
Reviewed-by: NDr. Stephen Henson <steve@openssl.org>

This includes basic constraints, key usages, issuer EKUs and auxiliary
trust OIDs (given a trust suitably related to the intended purpose).

Added tests and updated documentation.
Reviewed-by: NDr. Stephen Henson <steve@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

d2i_ECPrivateKey always caculates the public key so there is
no need to caculate it again in eckey_priv_decode().
Reviewed-by: NRich Salz <rsalz@openssl.org>

New functions to return internal pointer for order and cofactor. This
avoids the need to allocate a new BIGNUM which to copy the value to.
Simplify code to use new functions.
Reviewed-by: NRich Salz <rsalz@openssl.org>