Change the new SSL_get_client_random(), SSL_get_server_random() and
SSL_SESSION_get_master_key() functions to use size_t for |outlen| instead of
int.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Tor uses these values to implement a low-rent clone of RFC 5705 (which,
in our defense, we came up with before RFC 5705 existed).  But now that
ssl_st is opaque, we need another way to get at them.

Includes documentation, with suitable warnings about not actually
using these functions.
Signed-off-by: NNick Mathewson <nickm@torproject.org>
Signed-off-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NTim Hudson <tjh@openssl.org>

On the server side, if you want to know which ciphers the client
offered, you had to use session->ciphers.  But that field is no
longer visible, so we need a method to get at it.
Signed-off-by: NNick Mathewson <nickm@torproject.org>
Signed-off-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NTim Hudson <tjh@openssl.org>

The certificate masks are used to select which ciphersuite we are going to
use. The variables |emask_k| and |emask_a| relate to export grade key
exchange and authentication respecitively. The variables |mask_k| and
|mask_a| are the equivalent versions for non-export grade. This fixes an
instance where the two usages of export/non-export were mixed up. In
practice it makes little difference since it still works!
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Given the pervasive nature of TLS extensions it is inadvisable to run
OpenSSL without support for them. It also means that maintaining
the OPENSSL_NO_TLSEXT option within the code is very invasive (and probably
not well tested). Therefore it is being removed.
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Move per-connection state out of the CERT structure: which should just be
for shared configuration data (e.g. certificates to use).

In particular move temporary premaster secret, raw ciphers, peer signature
algorithms and shared signature algorithms.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Miscellaneous updates following review comments on the version negotiation
rewrite patches.
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

This commit changes the way that we do server side protocol version
negotiation. Previously we had a whole set of code that had an "up front"
state machine dedicated to the negotiating the protocol version. This adds
significant complexity to the state machine. Historically the justification
for doing this was the support of SSLv2 which works quite differently to
SSLv3+. However, we have now removed support for SSLv2 so there is little
reason to maintain this complexity.

The one slight difficulty is that, although we no longer support SSLv2, we
do still support an SSLv3+ ClientHello in an SSLv2 backward compatible
ClientHello format. This is generally only used by legacy clients. This
commit adds support within the SSLv3 code for these legacy format
ClientHellos.

Server side version negotiation now works in much the same was as DTLS,
i.e. we introduce the concept of TLS_ANY_VERSION. If s->version is set to
that then when a ClientHello is received it will work out the most
appropriate version to respond with. Also, SSLv23_method and
SSLv23_server_method have been replaced with TLS_method and
TLS_server_method respectively. The old SSLv23* names still exist as
macros pointing at the new name, although they are deprecated.

Subsequent commits will look at client side version negotiation, as well of
removal of the old s23* code.
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Remove RFC2712 Kerberos support from libssl. This code and the associated
standard is no longer considered fit-for-purpose.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Since COMP_METHOD is now defined in comp_lcl.h, it is no
longer possible to create new TLS compression methods without
using the OpenSSL source.  Only ZLIB is supported by default.
Also, since the types are opaque, #ifdef guards to use "char *"
instead of the real type aren't necessary.

The changes are actually minor.  Adding missing copyright to some
files makes the diff misleadingly big.
Reviewed-by: NMatt Caswell <matt@openssl.org>

If sk_SSL_CIPHER_new_null() returns NULL then ssl_bytes_to_cipher_list()
should also return NULL.

Based on an original patch by mrpre <mrpre@163.com>.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Just as with the OPENSSL_malloc calls, consistently use sizeof(*ptr)
for memset and memcpy.  Remove needless casts for those functions.
For memset, replace alternative forms of zero with 0.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

For a local variable:
        TYPE *p;
Allocations like this are "risky":
        p = OPENSSL_malloc(sizeof(TYPE));
if the type of p changes, and the malloc call isn't updated, you
could get memory corruption.  Instead do this:
        p = OPENSSL_malloc(sizeof(*p));
Also fixed a few memset() calls that I noticed while doing this.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

After the finale, the "real" final part. :)  Do a recursive grep with
"-B1 -w [a-zA-Z0-9_]*_free" to see if any of the preceeding lines are
an "if NULL" check that can be removed.
Reviewed-by: NTim Hudson <tjh@openssl.org>

There were a dozen-plus instances of this construct:
   if (0) { label: ..... }
Reviewed-by: NTim Hudson <tjh@openssl.org>

Don't check for NULL before calling free functions. This gets:
        ERR_STATE_free
        ENGINE_free
        DSO_free
        CMAC_CTX_free
        COMP_CTX_free
        CONF_free
        NCONF_free NCONF_free_data _CONF_free_data
        A sk_free use within OBJ_sigid_free
        TS_TST_INFO_free (rest of TS_ API was okay)
        Doc update for UI_free (all uses were fine)
        X509V3_conf_free
        X509V3_section_free
        X509V3_string_free
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Don't check for NULL before calling OPENSSL_free
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Don't check for NULL before calling a free routine.  This gets X509_.*free:
    x509_name_ex_free X509_policy_tree_free X509_VERIFY_PARAM_free
    X509_STORE_free X509_STORE_CTX_free X509_PKEY_free
    X509_OBJECT_free_contents X509_LOOKUP_free X509_INFO_free
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Following ANSI C rules, remove the casts from calls to
OPENSSL_malloc and OPENSSL_realloc.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>

Ongoing work to skip NULL check before calling free routine.  This gets:
    ecp_nistz256_pre_comp_free nistp224_pre_comp_free nistp256_pre_comp_free
    nistp521_pre_comp_free PKCS7_free PKCS7_RECIP_INFO_free
    PKCS7_SIGNER_INFO_free sk_PKCS7_pop_free PKCS8_PRIV_KEY_INFO_free
    PKCS12_free PKCS12_SAFEBAG_free PKCS12_free sk_PKCS12_SAFEBAG_pop_free
    SSL_CONF_CTX_free SSL_CTX_free SSL_SESSION_free SSL_free ssl_cert_free
    ssl_sess_cert_free
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Avoid checking for NULL before calling free functions.  This gets
ssl.*free:
    ssl_sess_cert_free ssl_free ssl_excert_free ssl_cert_free
    SSL_free SSL_SRP_CTX_free SSL_SESSION_free SSL_CTX_free
    SSL_CTX_SRP_CTX_free SSL_CONF_CTX_free
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

RECORD_LAYER_write_pending.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

The recent updates to libssl to enforce stricter return code checking, left
a small number of instances behind where return codes were being swallowed
(typically because the function they were being called from was declared as
void). This commit fixes those instances to handle the return codes more
appropriately.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

This commit handles BIO_ACCEPT_free BIO_CB_FREE BIO_CONNECT_free
BIO_free BIO_free_all BIO_vfree
Reviewed-by: NMatt Caswell <matt@openssl.org>

Ensure RAND_bytes return value is checked correctly, and that we no longer
use RAND_pseudo_bytes.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Also removes for it being NULL
Reviewed-by: NMatt Caswell <matt@openssl.org>