Reviewed-by: NTim Hudson <tjh@openssl.org>

it looks like these names have shifted a little over time.
Reviewed-by: NKurt Roeckx <kurt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1203)

Found by tis-interpreter
Reviewed-by: NRich Salz <rsalz@openssl.org>

GH: #1179

Reviewed-by: NRich Salz <rsalz@openssl.org>

GH: #1174

Found by tis-interpreter
Reviewed-by: NRich Salz <rsalz@openssl.org>

GH: #1173

Reviewed-by: NRich Salz <rsalz@openssl.org>

GH: #1172

Found by tis-interpreter
Reviewed-by: NRich Salz <rsalz@openssl.org>

GH: #1166

Found by tis-interpreter
Reviewed-by: NRich Salz <rsalz@openssl.org>

GH: #1164

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

The TS_RESP_verify_response() function is used for verifying the response
from a TSA. You can set the provided TS_VERIFY_CTX with different flags
depending on what aspects of the response you wish to verify.

A seg fault will occur if you supply the TS_VFY_SIGNER or TS_VFY_TSA_NAME
flags without also specifying TS_VFY_SIGNATURE.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Most of the no-dtls* builds were failing due to one test which had an
incorrect "skip" condition.
Reviewed-by: NAndy Polyakov <appro@openssl.org>

Add some information about the location of the default directory and the
default file.

RT#1051
Reviewed-by: NAndy Polyakov <appro@openssl.org>

If a user specifies -unix, -6, etc., then the program tries to
use the last one specified.  This is confusing code and leads to
scripting errors.  Instead, allow only one type.
Reviewed-by: NAndy Polyakov <appro@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NKurt Roeckx <kurt@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>

We already test in EC_POINT_oct2point that points are on the curve. To
be on the safe side, move this check to
EC_POINT_set_affine_coordinates_* so as to also check point coordinates
received through some other method.

We do not check projective coordinates, though, as
- it's unlikely that applications would be receiving this primarily
  internal representation from untrusted sources, and
- it's possible that the projective setters are used in a setting where
  performance matters.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Also fix typo noted on GitHub.
Suppport typedef and #define to find-doc-nits
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Files like dh.pod, etc., mostly duplicated the API-specific pod files.
Removed the duplicated content; that often mean the whole file could
be removed.  Some of the content about internals got moved into README
files in the source tree.  Some content (e.g., err.pod) got moved
into other pod pages.

Annotate generic pages, remove dup NAME
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Partially document the ASN1 template stuff, and its use for i2d/d2i
and PEM I/O.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>

When session tickets are used, it's possible that SNI might swtich the
SSL_CTX on an SSL. Normally, this is not a problem, because the
initial_ctx/session_ctx are used for all session ticket/id processes.

However, when the SNI callback occurs, it's possible that the callback
may update the options in the SSL from the SSL_CTX, and this could
cause SSL_OP_NO_TICKET to be set. If this occurs, then two bad things
can happen:

1. The session ticket TLSEXT may not be written when the ticket expected
flag is set. The state machine transistions to writing the ticket, and
the client responds with an error as its not expecting a ticket.
2. When creating the session ticket, if the ticket key cb returns 0
the crypto/hmac contexts are not initialized, and the code crashes when
trying to encrypt the session ticket.

To fix 1, if the ticket TLSEXT is not written out, clear the expected
ticket flag.
To fix 2, consider a return of 0 from the ticket key cb a recoverable
error, and write a 0 length ticket and continue. The client-side code
can explicitly handle this case.

Fix these two cases, and add unit test code to validate ticket behavior.
Reviewed-by: NEmilia Käsper <emilia@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1098)

Various fixes to get the following to compile:

./config no-asm -ansi -D_DEFAULT_SOURCE

RT4479
RT4480
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>

GH1098: Add X509_get_pathlen() (and a test)
GH1097:  Add SSL_is_dtls() function.

Documented.
Reviewed-by: NMatt Caswell <matt@openssl.org>

This change also avoids calling strlen twice when srclen is 0
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>

Sessions are stored on the session_ctx, which doesn't change after
SSL_set_SSL_CTX().
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1189)

Reviewed-by: NMatt Caswell <matt@openssl.org>

The previous commit changed how we handle out-of-context empty records.
This commit adds some tests for the various scenarios. There are three
tests:
1: Check that if we inject an out-of-context empty record then we fail
2: Check that if we inject an in-context empty record then we succeed
3: Check that if we inject too many in-context empty records then we fail.
Reviewed-by: NAndy Polyakov <appro@openssl.org>

Previously if we received an empty record we just threw it away and
ignored it. Really though if we get an empty record of a different content
type to what we are expecting then that should be an error, i.e. we should
reject out of context empty records. This commit makes the necessary changes
to achieve that.

RT#4395
Reviewed-by: NAndy Polyakov <appro@openssl.org>

The number of read pipelines should be reset in the event of reuse of an
SSL object.
Reviewed-by: NAndy Polyakov <appro@openssl.org>

The previous commit fixed a bug with BN_mod_word() which would have been
caught if we had a test for it. This commit adds one.
Reviewed-by: NAndy Polyakov <appro@openssl.org>

On systems where we do not have BN_ULLONG (e.g. typically 64 bit systems)
then BN_mod_word() can return incorrect results if the supplied modulus is
too big.

RT#4501
Reviewed-by: NAndy Polyakov <appro@openssl.org>

Make d2i_X509 a generic d2i/i2d manpage.
Pull common stuff out of other d2i/i2d docs.
Update find-doc-nits to know about "generic" manpages.
Cleanup some overlap.
Fix up a bunch of other references.
Reviewed-by: NMatt Caswell <matt@openssl.org>

The asdf.pod filename must have asdf in its NAME section.
also check for names existing as a different filename (via Levitte)
Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1186)