Test that custom extensions still work even after a change in SSL_CTX due
to SNI. See #2180.
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3425)

The previous commit fixed a bug which occurs when serverinfo is loaded
from memory (not from a file). This adds a test for loading serverinfo
from memory.
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3382)

Showed up on GCC with strict warnings.
Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3325)

Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3252)

Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3243)

Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3139)

Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3139)

Make sure the server can write normal data after earlier writing early data.
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3091)

Commit 9b5c865d introduced a synthetic delay between arrival of EoED and
CF. We actually want to delay the arrival of CF even further to demonstrate
that we can write early data even when "in init".
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3091)

This tests the bug fixed in the previous commit. We introduce a synthetic
delay between the server receiving EoED and CF and check that we can still
send early data.
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3089)

We want to make sure that if we if are using SSL_MODE_AUTO_RETRY then
if SSL_read_early_data() hits EndOfEarlyData then it doesn't auto retry
and end up with normal data. The same issue could occur with read_ahead
which is what we use in this test.
Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3077)

Fix some comments too
[skip ci]
Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3069)

The end of early data is now indicated by a new handshake message rather
than an alert.
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2895)

Change the early data API so that the server must use
SSL_write_early_data() to write to an unauthenticated client.
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2737)

This is for consistency with the rest of the API where all the functions
are called *early_data*.
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2737)

This is for consistency with the rest of the API where all the functions
are called *early_data*.
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2737)

Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2737)

Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2788)

Make sure that we can stop handshake processing and resume it later.
Also check that the cipher list and compression methods are sane.
Unfortunately, we don't have the client-side APIs needed to force
a specific (known) session ID to be sent in the ClientHello, so
that accessor cannot be tested here.
Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)

Certain callback APIs allow the callback to request async processing
by trickling a particular error value up the stack to the application
as an error return from the handshake function.  In those cases,
SSL_want() returns a code specific to the type of async processing
needed.

The create_ssl_connection() helper function for the tests is very
helpful for several things, including creating API tests.  However,
it does not currently let us test the async processing functionality
of these callback interfaces, because the special SSL error codes
are treated as generic errors and the helper continues to loop until
it reaches its maximum iteration count.

Add a new parameter, 'want', that indicates an expected/desired
special SSL error code, so that the helper will terminate when
either side reports that error, giving control back to the calling
function and allowing the test to proceed.
Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)

Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2287)

Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)

Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2288)

Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1646)

Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)

Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2173)

We need a new API for TLSv1.3 sig algs
Reviewed-by: NTim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2160)

Reviewed-by: NTim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2160)

SSL_clear() was resetting numwpipes to 0, but not freeing any allocated
memory for existing write buffers.

Fixes #2026
Reviewed-by: NRich Salz <rsalz@openssl.org>

There are some minor differences in the format of a ServerHello in TLSv1.3.

Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Simple tests only need to implement register_tests().
Tests that need a custom main() should implement test_main(). This will
be wrapped in a main() that performs common setup/teardown (currently
crypto-mdebug).

Note that for normal development, enable-asan is usually
sufficient for detecting leaks, and more versatile.

enable-crypto-mdebug is stricter as it will also
insist that all static variables be freed. This is useful for debugging
library init/deinit; however, it also means that test_main() must free
everything it allocates.
Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

This test checks that read_ahead works correctly when dealing with large
records.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

The new large message test in sslapitest needs OPENSSL_NO_DTLS guards
Reviewed-by: NRichard Levitte <levitte@openssl.org>

A mem leak could occur on an error path. Also the mempacket BIO_METHOD
needs to be cleaned up, because of the newly added DTLS test.

Also fixed a double semi-colon in ssltestlib.c
Reviewed-by: NRich Salz <rsalz@openssl.org>

Ensure that we send a large message during the test suite.
Reviewed-by: NEmilia Käsper <emilia@openssl.org>

Test that the OCSP callbacks work as expected.
Reviewed-by: NRich Salz <rsalz@openssl.org>

msan detected an uninit read.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Split the create_ssl_connection() helper function into two steps: one to
create the SSL objects, and one to actually create the connection. This
provides the ability to make changes to the SSL object before the
connection is actually made.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Fix some bogus "may be used uninitialized" warnings on some compilers.
Reviewed-by: NRich Salz <rsalz@openssl.org>

SSL_set_rbio() and SSL_set_wbio() are new functions in 1.1.0 and really
should be called SSL_set0_rbio() and SSL_set0_wbio(). The old
implementation was not consistent with what "set0" means though as there
were special cases around what happens if the rbio and wbio are the same.
We were only ever taking one reference on the BIO, and checking everywhere
whether the rbio and wbio are the same so as not to double free.

A better approach is to rename the functions to SSL_set0_rbio() and
SSL_set0_wbio(). If an existing BIO is present it is *always* freed
regardless of whether the rbio and wbio are the same or not. It is
therefore the callers responsibility to ensure that a reference is taken
for *each* usage, i.e. one for the rbio and one for the wbio.

The legacy function SSL_set_bio() takes both the rbio and wbio in one go
and sets them both. We can wrap up the old behaviour in the implementation
of that function, i.e. previously if the rbio and wbio are the same in the
call to this function then the caller only needed to ensure one reference
was passed. This behaviour is retained by internally upping the ref count.

This commit was inspired by BoringSSL commit f715c423224.

RT#4572
Reviewed-by: NRich Salz <rsalz@openssl.org>