Previous commit 7bb196a7 attempted to "fix" a problem with the way
SSL_shutdown() behaved whilst in mid-handshake. The original behaviour had
SSL_shutdown() return immediately having taken no action if called mid-
handshake with a return value of 1 (meaning everything was shutdown
successfully). In fact the shutdown has not been successful.

Commit 7bb196a7 changed that to send a close_notify anyway and then
return. This seems to be causing some problems for some applications so
perhaps a better (much simpler) approach is revert to the previous
behaviour (no attempt at a shutdown), but return -1 (meaning the shutdown
was not successful).

This also fixes a bug where SSL_shutdown always returns 0 when shutdown
*very* early in the handshake (i.e. we are still using SSLv23_method).
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

dgst: using digest instead of specific digest commands
the digest list specified in man dgst may be inaccurate, hence using
digest and referring to the list in digest-commands

'sha' as a digest name is no longer supported

dgst,pkeyutl cmds help cleanup
- In dgst, pkeyutl cmds, some options help was missing.
- fixed a minor typo in openssl.pod, that fixes make install.
- digest-commands was showing ‘sha’, which is not a supported digest
anymore.
Signed-off-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NTim Hudson <tjh@openssl.org>

Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

MR: #1879

Reviewed-by: NTim Hudson <tjh@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>

opt_valtype 0 is same as '-' while printing cmd usage
asn1parse/ca/ciphers help cleanup
Signed-off-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Some time ago, we had a ex_libs configuration setting that could be
divided into lflags and ex_libs.  These got divided in two settings,
lflags and ex_libs, and the former was interpreted to be general
linking flags.

Unfortunately, that conclusion wasn't entirely accurate.  Most of
those linking were meant to end up in a very precise position on the
linking command line, just before the spec of libraries the linking
depends on.

Back to the drawing board, we're diving things further, now having
lflags, which are linking flags that aren't depending on command line
position, plib_lflags, which are linking flags that should show up just
before the spec of libraries to depend on, and finally ex_libs, which
is the spec of extra libraries to depend on.

Also, documentation is changed in Configurations/README.  This was
previously forgotten.
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

squelch sign-compare warning
Signed-off-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>

MR: #1874

Signed-off-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Allow initial engine names as first parameters before flags.
Also add engine param to help summary

Wrote manpage
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

Reviewed-by: NKurt Roeckx <kurt@openssl.org>

It's not available on all OSs, e_os.h already does the right thing
Reviewed-by: NRichard Levitte <levitte@openssl.org>

MR: #1870

Clang rightly does not like extern symbols that are not declared
in any header file, as typically these are not intended for global
visibility and are exposed in error.  This was indeed the case with
various file-scope objects in dtlsv1listentest.c.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Make it clear that if we are unable to get hold of the peer address then
*peer is cleared and the family set to AF_UNSPEC.
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

Adds a set of tests for the newly rewritten DTLSv1_listen function.
The test pokes various packets at the function and then checks
the return value and the data written out to ensure it is what we
would have expected.
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

The recently rewriten DTLSv1_listen code does not support fragmented
ClientHello messages because fragment reassembly requires server state
which is against the whole point of DTLSv1_listen. This change adds some
partial support for fragmented ClientHellos. It requires that the cookie
must be within the initial fragment. That way any non-initial ClientHello
fragments can be dropped and fragment reassembly is not required.
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

Adds a new function BIO_ADDR_clear to reset a BIO_ADDR back to an
unitialised state, and to set the family to AF_UNSPEC.
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

Signed-off-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>

Reviewed-by: NAndy Polyakov <appro@openssl.org>

The DTLSv1_listen function exposed details of the underlying BIO
abstraction and did not properly allow for IPv6. This commit changes the
"peer" argument to be a BIO_ADDR and makes it a first class function
(rather than a ctrl) to ensure proper type checking.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Also remove two mistakenly checked-in files.
Reviewed-by: NDr. Stephen Henson <steve@openssl.org>

Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

Signed-off-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>

Signed-off-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>

Reviewed-by: NDr. Stephen Henson <steve@openssl.org>

Replace all magic numbers with #defined constants except in boolean
functions that return 0 for failure and 1 for success.  Avoid a
couple memory leaks in error recovery code paths.  Code style
improvements.
Reviewed-by: NDr. Stephen Henson <steve@openssl.org>

RT1556: doc/crypto/threads.pod
RT2024: Missing pages mentioned in crypto.pod
RT2890: Wrong size in ERR_string_error description.
RT3461: Better description of PEM Encryption
        (Jeffrey Walton <noloader@gmail.com>)
        Also, fix up formatting and removed some code examples
        that encourage unsafe patterns, like unencrypted private
        keys (Rich Salz)
RT4240: Document some speed flags (Tomas Mraz <tmraz@redhat.com>)
RT4260: Fix return value doc for X509_REQ_sign and X509_sign
        (Laetitia Baudoin <lbaudoin@google.com>)
Reviewed-by: NEmilia Käsper <emilia@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NEmilia Käsper <emilia@openssl.org>

Fortunately, we only use socklen_t internally
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NTim Hudson <tjh@openssl.org>