Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NStephen Henson <steve@openssl.org>

Make X509_OBJECT, X509_STORE_CTX, X509_STORE, X509_LOOKUP,
and X509_LOOKUP_METHOD opaque.
Remove unused X509_CERT_FILE_CTX
Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NDr. Stephen Henson <steve@openssl.org>

To begin with, the default should have been the import library, not
the DLL itself.  However, we don't know what directory it's installed
in either way, so we may as well demand the full path from the user
Reviewed-by: NMatt Caswell <matt@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>

Update the Travis and Appveyor builds to explicitly state no-shared where
applicable.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

In most cases we expect that people will be using shared libraries not
static ones, therefore we make that the default.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Travis identified a problem with freeing the ex_data locks which wasn't
quite right in ff234405. Trying to fix it identified a further problem:
the ex_data locks are cleaned up by OPENSSL_cleanup(), which is called
explicitly by CRYPTO_mem_leaks(), but then later the BIO passed to
CRYPTO_mem_leaks() is freed. An attempt is then made to use the ex_data
lock already freed.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>

no-stdio does not work with the apps. Since the tests also need the apps
it doesn't support that either. Therefore we disable building of both.

no-autoalginit is not compatible with the apps because it requires explicit
loading of the algorithms, and the apps don't do that. Therefore we disable
building the apps for this option. Similarly the tests depend on the apps
so we also disable the tests. Finally the whole point about no-autoalginit
is to avoid excessive executable sizes when doing static linking. Therefore
we disable "shared" if this option is selected.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Running a "make update" wanted to add err_cleanup to libcrypto.num which
is wrong.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Some locks were not being properly cleaned up during close down.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

During Configure we attempt to check the kernel version of this platform
to see whether we can compile the AFALG engine. If the kernel version
looks recent enough then we enable AFALG. However when we compile
e_afalg.c we check the version of the linux headers. If there is a
mismatch between the linux headers and the currently running kernel then
we don't compile the AFLAG engine and continue. This was causing a link
error.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Introduced in:

    commit 79c7f74d
    Author: Ben Laurie <ben@links.org>
    Date:   Tue Mar 29 19:37:57 2016 +0100

    Fix buffer overrun in ASN1_parse().

Problem input:

    https://tools.ietf.org/html/draft-ietf-curdle-pkix-eddsa-00#section-8.1
    -----BEGIN PUBLIC KEY-----
    MC0wCAYDK2VkCgECAyEAGb9ECWmEzf6FQbrBZ9w7lshQhqowtrbLDFw4rXAxZuE=
    -----END PUBLIC KEY-----

Previously:

        0:d=0  hl=2 l=  45 cons: SEQUENCE
        2:d=1  hl=2 l=   8 cons: SEQUENCE
        4:d=2  hl=2 l=   3 prim: OBJECT            :1.3.101.100
        9:d=2  hl=2 l=   1 prim: ENUMERATED        :02
    Error in encoding
    140735164989440:error:0D07207B:asn1 encoding routines:ASN1_get_object:header too long:../openssl/crypto/asn1/asn1_lib.c:148:

Now:

    0:d=0  hl=2 l=  45 cons: SEQUENCE
    2:d=1  hl=2 l=   8 cons: SEQUENCE
    4:d=2  hl=2 l=   3 prim: OBJECT            :1.3.101.100
    9:d=2  hl=2 l=   1 prim: ENUMERATED        :02
   12:d=1  hl=2 l=  33 prim: BIT STRING
      0000 - 00 19 bf 44 09 69 84 cd-fe 85 41 ba c1 67 dc 3b   ...D.i....A..g.;
      0010 - 96 c8 50 86 aa 30 b6 b6-cb 0c 5c 38 ad 70 31 66   ..P..0....\8.p1f
      0020 - e1                                                .
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Document removal of no-aes, no-hmac, no-rsa, no-sha and no-md5.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Update the config options documentation based on feedback.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

There were a lot of options missing from INSTALL. This adds descriptions
for them.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

no-hmac is no longer an option so remove OPENSSL_NO_HMAC guards.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

no-sha is no longer an option so remove OPENSSL_NO_SHA guards.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

no-aes is no longer a Configure option and therefore the OPENSSL_NO_AES
guards can be removed.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

These algorithms are fundamental and extensively used. The "no-" options
do not work either in 1.1.0 or in other released branches. Therefore the
ability to disable them should be removed.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>

The check_defer() function was used to ensure that EVP_cleanup() was always
called before OBJ_cleanup(). The new cleanup code ensures this so it is
no longer needed.

Remove obj_cleanup() call in OID config module: it is not needed
any more either.
Reviewed-by: NMatt Caswell <matt@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>

Don't expose purely libcrypto internal symbols, even to libssl.
Reviewed-by: NMatt Caswell <matt@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

When compressing, the output / input is a binary format, not a text
format like BASE64.  This is important on Windows, where a ^Z in a
text file is seen as EOF, and there could be a ^Z somewhere in a
compressed file, cutting it short as input.
Reviewed-by: NMatt Caswell <matt@openssl.org>

The handling was Unix centric, already in Configure.  Change that to
just collect the value and let the build file templates figure out
what to do with it.
Reviewed-by: NMatt Caswell <matt@openssl.org>

Instead of absolute hard coding of the libz library name, have it use
the macro LIBZ, which is set to defaults we know in case it's
undefined.

This allows our configuration to set something that's sane on current
or older platforms, and allows the user to override it by defining
LIBZ themselves.
Reviewed-by: NMatt Caswell <matt@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>

The macros ZLIB and ZLIB_SHARED weren't appropriately defined,
deviating wrongly from how they worked in earlier OpenSSL versions.
So, restore it so that ZLIB is defined if configured "enable-zlib" and
so that ZLIB and ZLIB_SHARED are defined if configured
"enable-zlib-dynamic".

Additionally, correct the interpretation of the --with-zlib-lib value
on Windows and VMS, where it's used to indicate the actual zlib
zlib library file / logical name, as that can differ depending on zlib
version and packaging on those platforms.

Finally for Windows and VMS, we also define the macro LIBZ with that
file name / logical name when configured "zlib-dynamic", so the
compression unit can pick it up and use it.
Reviewed-by: NMatt Caswell <matt@openssl.org>