Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1413)

Reviewed-by: NKurt Roeckx <kurt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1245)

Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Don't have #error statements in header files, but instead wrap
the contents of that file in #ifndef OPENSSL_NO_xxx
This means it is now always safe to include the header file.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

With read pipelining we use multiple SSL3_RECORD structures for reading.
There are SSL_MAX_PIPELINES (32) of them defined (typically not all of these
would be used). Each one has a 16k compression buffer allocated! This
results in a significant amount of memory being consumed which, most of the
time, is not needed.  This change swaps the allocation of the compression
buffer to be lazy so that it is only done immediately before it is actually
used.
Reviewed-by: NTim Hudson <tjh@openssl.org>

1) Simplify code with better PACKET methods.

2) Make broken SNI parsing explicit. SNI was intended to be extensible
to new name types but RFC 4366 defined the syntax inextensibly, and
OpenSSL has never parsed SNI in a way that would allow adding a new name
type. RFC 6066 fixed the definition but due to broken implementations
being widespread, it appears impossible to ever extend SNI.

3) Annotate resumption behaviour. OpenSSL doesn't currently handle all
extensions correctly upon resumption. Annotate for further clean-up.

4) Send an alert on ALPN protocol mismatch.
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Removing code, where memory was getting allocated for an unused variable
Signed-off-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Add -DBIO_DEBUG to --strict-warnings.
Remove comments about outdated debugging ifdef guards.
Remove md_rand ifdef guarding an assert; it doesn't seem used.
Remove the conf guards in conf_api since we use OPENSSL_assert, not assert.
For pkcs12 stuff put OPENSSL_ in front of the macro name.
Merge TLS_DEBUG into SSL_DEBUG.
Various things just turned on/off asserts, mainly for checking non-NULL
arguments, which is now removed: camellia, bn_ctx, crypto/modes.
Remove some old debug code, that basically just printed things to stderr:
  DEBUG_PRINT_UNKNOWN_CIPHERSUITES, DEBUG_ZLIB, OPENSSL_RI_DEBUG,
  RL_DEBUG, RSA_DEBUG, SCRYPT_DEBUG.
Remove OPENSSL_SSL_DEBUG_BROKEN_PROTOCOL.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

- Make use of the functions given through CRYPTO_set_mem_functions().
- CRYPTO_free(), CRYPTO_clear_free() and CRYPTO_secure_free() now receive
  __FILE__ and __LINE__.
- The API for CRYPTO_set_mem_functions() and CRYPTO_get_mem_functions()
  is slightly changed, the implementation for free() now takes a couple
  of extra arguments, taking __FILE__ and __LINE__.
- The CRYPTO_ memory functions will *always* receive __FILE__ and __LINE__
  from the corresponding OPENSSL_ macros, regardless of if crypto-mdebug
  has been enabled or not.  The reason is that if someone swaps out the
  malloc(), realloc() and free() implementations, we can't know if they
  will use them or not.
Reviewed-by: NRich Salz <rsalz@openssl.org>

This was done by the following
        find . -name '*.[ch]' | /tmp/pl
where /tmp/pl is the following three-line script:
        print unless $. == 1 && m@/\* .*\.[ch] \*/@;
        close ARGV if eof; # Close file to reset $.

And then some hand-editing of other files.
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

Modify libssl to use EVP_PKEY TLS PRF.
Reviewed-by: NMatt Caswell <matt@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

MR: #364

Change handshake hash array into a single digest context simplifying the
handhake hash code. Use EVP_md5_sha1() if needed for handshake hashes in
TLS 1.1 and earlier.

Simplify PRF code to also use a single digest and treat EVP_md5_sha1()
as a special case.

Modify algorithm2 field of ciphers to use a single index value for handshake
hash and PRF instead of a bitmap.
Reviewed-by: NMatt Caswell <matt@openssl.org>

Reviewed-by: NAndy Polyakov <appro@openssl.org>

There are lots of calls to EVP functions from within libssl There were
various places where we should probably check the return value but don't.
This adds these checks.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NTim Hudson <tjh@openssl.org>

Reviewed-by: NTim Hudson <tjh@openssl.org>

Rewrite ssl3_digest_cached_records handling. Only digest cached records
if digest array is NULL: this means it is safe to call
ssl3_digest_cached_records multiple times (subsequent calls are no op).

Remove flag TLS1_FLAGS_KEEP_HANDSHAKE instead only update handshake buffer
if digest array is NULL.

Add additional "keep" parameter to ssl3_digest_cached_records to indicate
if the handshake buffer should be retained after digesting cached records
(needed for TLS 1.2 client authentication).
Reviewed-by: NMatt Caswell <matt@openssl.org>

Reviewed-by: NTim Hudson <tjh@openssl.org>

Where we called openssl_cleanse, make sure we do it on all error
paths.  Be consistent in use of sizeof(foo) when possible.
Reviewed-by: NAndy Polyakov <appro@openssl.org>

Remove RFC2712 Kerberos support from libssl. This code and the associated
standard is no longer considered fit-for-purpose.
Reviewed-by: NRich Salz <rsalz@openssl.org>

For a local variable:
        TYPE *p;
Allocations like this are "risky":
        p = OPENSSL_malloc(sizeof(TYPE));
if the type of p changes, and the malloc call isn't updated, you
could get memory corruption.  Instead do this:
        p = OPENSSL_malloc(sizeof(*p));
Also fixed a few memset() calls that I noticed while doing this.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Don't check for NULL before calling free functions. This gets:
        ERR_STATE_free
        ENGINE_free
        DSO_free
        CMAC_CTX_free
        COMP_CTX_free
        CONF_free
        NCONF_free NCONF_free_data _CONF_free_data
        A sk_free use within OBJ_sigid_free
        TS_TST_INFO_free (rest of TS_ API was okay)
        Doc update for UI_free (all uses were fine)
        X509V3_conf_free
        X509V3_section_free
        X509V3_string_free
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Don't check for NULL before calling OPENSSL_free
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Add OPENSSL_clear_free which merges cleanse and free.
(Names was picked to be similar to BN_clear_free, etc.)
Removed OPENSSL_freeFunc macro.
Fixed the small simple ones that are left:
        CRYPTO_free CRYPTO_free_locked OPENSSL_free_locked
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Following ANSI C rules, remove the casts from calls to
OPENSSL_malloc and OPENSSL_realloc.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

In DTLS, immediately prior to epoch change, the write_sequence is supposed
to be stored in s->d1->last_write_sequence. The write_sequence is then reset
back to 00000000. In the event of retransmits of records from the previous
epoch, the last_write_sequence is restored. This commit fixes a bug in
DTLS1.2 where the write_sequence was being reset before last_write_sequence
was saved, and therefore retransmits are sent with incorrect sequence
numbers.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Ensure that all functions have their return values checked where
appropriate. This covers all functions defined and called from within
libssl.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

The function tls1_PRF counts the number of digests in use and partitions
security evenly between them. There always needs to be at least one digest
in use, otherwise this is an internal error. Add a sanity check for this.
Reviewed-by: NRichard Levitte <levitte@openssl.org>