no-aes is no longer a Configure option and therefore the OPENSSL_NO_AES
guards can be removed.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

The no-op de-init macros may fail because of extraneous ";", so we use
a slightly different construct instead.
Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

EVP_cleanup() should not be called expicitly - we should leave
auto-deinit to clean this up instead.
Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

BIO_new, etc., don't need a non-const BIO_METHOD. This allows all the
built-in method tables to live in .rodata.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NAndy Polyakov <appro@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NAndy Polyakov <appro@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

We had the function EVP_CIPHER_CTX_cipher_data which is newly added for
1.1.0. As we now also need an EVP_CIPHER_CTX_set_cipher_data it makes
more sense for the former to be called EVP_CIPHER_CTX_get_cipher_data.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Implement aes128-cbc as a pipeline capable cipher in the dasync engine.
As dasync is just a dummy engine, it actually just performs the parallel
encrypts/decrypts in serial.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Add a flag to indicate that a cipher is capable of performing
"pipelining", i.e. multiple encrypts/decrypts in parallel. Also add some
new ctrls that ciphers will need to implement if they are pipeline capable.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Signed-off-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Make PKCS8_PRIV_KEY_INFO opaque. Several accessor functions already exist
for this structure. Two new ones were added to handle attributes.

The old handling of broken formats has been removed and the corresponding
structures simplified.
Reviewed-by: NRich Salz <rsalz@openssl.org>

This patch implements the HMAC-based Extract-and-Expand Key Derivation
Function (HKDF) as defined in RFC 5869.

It is required to implement the QUIC and TLS 1.3 protocols (among others).
Signed-off-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NDr. Stephen Henson <steve@openssl.org>

Utility functions to pass a string or hex string to EVP_PKEY_CTX_ctrl().
Reviewed-by: NRich Salz <rsalz@openssl.org>

Man, there were a lot of renamings :)
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Fixes for the auto-init/deinit code based on review comments
Reviewed-by: NRichard Levitte <levitte@openssl.org>

This builds on the previous commit to auto initialise/deinitialise
libcrypto.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

This was done by the following
        find . -name '*.[ch]' | /tmp/pl
where /tmp/pl is the following three-line script:
        print unless $. == 1 && m@/\* .*\.[ch] \*/@;
        close ARGV if eof; # Close file to reset $.

And then some hand-editing of other files.
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Add EVP_PKEY algorithm for TLS1 PRF.
Reviewed-by: NMatt Caswell <matt@openssl.org>

The M_EVP_* macros related to EVP_CIPHER / EVP_CIPHER_CTX are not
public, and are unused.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

We follow the method used for EVP_MD.
Also, move all the internal EVP_CIPHER building macros from evp_locl.h
to evp_int.h.  This will benefit our builtin EVP_CIPHERs.
Reviewed-by: NRich Salz <rsalz@openssl.org>

EVP_CIPHER_CTX_flags was returning the flags of its associated
EVP_CIPHER.  However, EVP_CIPHER_CTX has flags of its own, so this
function is quite confusing and therefore error prone.
Reviewed-by: NRich Salz <rsalz@openssl.org>

New functions:

- EVP_CIPHER_CTX_encrypting()
- EVP_CIPHER_CTX_iv()
- EVP_CIPHER_CTX_iv_noconst()
- EVP_CIPHER_CTX_original_iv()
- EVP_CIPHER_CTX_buf_noconst()
- EVP_CIPHER_CTX_num()
- EVP_CIPHER_CTX_set_num()
- EVP_CIPHER_CTX_cipher_data()
- EVP_CIPHER_CTX_new_cipher_data()

Note that the accessors / writers for iv, buf and num may go away, as
those rather belong in the implementation's own structure (cipher_data)
when the implementation would affect them (that would be the case when
they are flagged EVP_CIPH_CUSTOM_IV or EVP_CIPH_FLAG_CUSTOM_CIPHER).
Reviewed-by: NRich Salz <rsalz@openssl.org>

Following the method used for EVP_MD_CTX and HMAC_CTX,
EVP_CIPHER_CTX_init and EVP_CIPHER_CTX_cleanup are joined together
into one function, EVP_CIPHER_CTX_reset, with EVP_CIPHER_CTX_init kept
as an alias.
EVP_CIPHER_CTX_cleanup fills no purpose of its own any more and is
therefore removed.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NDr. Stephen Henson <steve@openssl.org>
Reviewed-by: NKurt Roeckx <kurt@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Commit 6140f036 added some new ctrl constants. However due to a
merge error one of these values was duplicated with an existing
value.
Reviewed-by: NRich Salz <rsalz@openssl.org>

These are needed for GOST
Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Looking over names, it seems like we usually use names ending with
_new and _free as object constructors and destructors.  Also, since
EVP_MD_CTX_init is now used to reset a EVP_MD_CTX, it might as well be
named accordingly.
Reviewed-by: NRich Salz <rsalz@openssl.org>

The idea is that with EVP_MD_CTX_create() and EVP_MD_CTX_destroy(),
EVP_MD_CTX_cleanup and EVP_MD_CTX_init is not used the same as before.
Instead, we need a single function that can be used to reinitialise an
existing EVP_MD_CTX that's been created with EVP_MD_CTX_create()
previously.  Combining EVP_MD_CTX_cleanup and EVP_MD_CTX_init into
that one function is the answer.
Reviewed-by: NRich Salz <rsalz@openssl.org>

This moves the definition to crypto/include/internal/evp_int.h and
defines all the necessary method creators, destructors, writers and
accessors.  The name standard for the latter is inspired from the
corresponding functions to manipulate UI methods.
Reviewed-by: NRich Salz <rsalz@openssl.org>