The flags RSA_FLAG_NO_CONSTTIME, DSA_FLAG_NO_EXP_CONSTTIME and
DH_FLAG_NO_EXP_CONSTTIME which previously provided the ability to switch
off the constant time implementation for RSA, DSA and DH have been made
no-ops and deprecated.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

The dsa_ossl.c file defined a couple of multi-line macros, but then only
used each one once. The macros just serve to complicate the code and make
it more difficult to understand what is really going on. Hence they are
removed.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Operations in the DSA signing algorithm should run in constant time in
order to avoid side channel attacks. A flaw in the OpenSSL DSA
implementation means that a non-constant time codepath is followed for
certain operations. This has been demonstrated through a cache-timing
attack to be sufficient for an attacker to recover the private DSA key.

CVE-2016-2178
Reviewed-by: NRichard Levitte <levitte@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>

Some of the instructions used in latest additions are extension
ones. There is no real reason to limit ourselves to specific
processors, so [re-]adhere to base instruction set.

RT#4548
Reviewed-by: NRich Salz <rsalz@openssl.org>

In rare cases, the shell we run test programs in may have complaints.
Shut those up unless testing verbosely.
Reviewed-by: NViktor Dukhovni <viktor@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NAndy Polyakov <appro@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NKurt Roeckx <kurt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1074)

Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NKurt Roeckx <kurt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1074)

Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NKurt Roeckx <kurt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1074)

Return directly NULL after ASN1_STRING_set, as it already has set an error code.
Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NKurt Roeckx <kurt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1074)

Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NKurt Roeckx <kurt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1074)

Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NKurt Roeckx <kurt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1074)

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Previous build scheme allowed building just the stuff in one
subdirectory, like this:

    make -C crypto/aes

Because the unified only has a top-level Makefile, this is not
possible with it.  This change adds a replacement where each directory
we have something to build in becomes a target in its own right,
allowing building something like this:

    make crypto/aes

The exception is the directory test, because we already have such a
target.
Reviewed-by: NStephen Henson <steve@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

GH: #1139

RT#4474 (partial)
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NBen Laurie <ben@links.org>

MR: #2740

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Remove some unused files.
Rename doc-nit-check to be consistent.
Add check for multiple #include in synopsis.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Since one generates files that the other depends on, there's no
real reason to keep them separate.  Since they were both different
aspects of 'openssl req', the merge ends up in 25-test_req.t.

This also makes cleanup easier.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Needed to get size_t on Windows
Reviewed-by: NRich Salz <rsalz@openssl.org>

Needed to get size_t
Reviewed-by: NRich Salz <rsalz@openssl.org>

Needed to get the needed declarations for STACK_OF(X509)
Reviewed-by: NRich Salz <rsalz@openssl.org>

Generate small test programs to check that external programs can be
built with our stuff at a very basic level.

For now, they check that each of our header files can be included
individually without compile failure.
Reviewed-by: NRich Salz <rsalz@openssl.org>

According to the x509 man page in the section discussing -certopt it says
that the ca_default option is the same as that used by the ca utility and
(amongst other things) has the effect of suppressing printing of the
signature - but in fact it doesn't. This error seems to have been present
since the documentation was written back in 2001. It never had this effect.

The default config file sets the certopt value to ca_default. The ca utility
takes that and THEN adds additional options to suppress printing of the
signature. So the ca utility DOES suppress printing of the signature - but
it is not as a result of using the ca_default option.

GitHub Issue #247
Reviewed-by: NRich Salz <rsalz@openssl.org>

If the string to print is exactly 2048 character long (excluding the NULL
terminator) then BIO_printf will chop off the last byte. This is because
it has filled its static buffer but hasn't yet allocated a dynamic buffer.
In cases where we don't have a dynamic buffer we need to truncate but that
is not the case for BIO_printf(). We need to check whether we are able to
have a dynamic buffer buffer deciding to truncate.
Reviewed-by: NRich Salz <rsalz@openssl.org>

zapparams modification based on tip from Matt Caswell

RT#3198
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>

The ssl3_init_finished_mac() function can fail, in which case we need to
propagate the error up through the stack.

RT#3198
Reviewed-by: NRich Salz <rsalz@openssl.org>

Fill out the INSTALL instructions with more information on Configure
arguments, environment variables and Makefile targets.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Use STATUS_SUCCESS instead of 0.
Renamed USE_BCRYPT to RAND_WINDOWS_USE_BCRYPT to avoid possible collisions with other defines.
Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1142)

Adds missing casts for 64-bit.
Removed zero initialization of hProvider. hProvider is an "out" parameter of CryptAcquireContextW.
Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1142)

Define USE_BCRYPT
Removed _WIN32_WINNT define
Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1142)

When openssl is compiled with MSVC and _WIN32_WINNT>=0x0601 (Windows 7), BCryptGenRandom is used instead of the legacy CryptoAPI.

This change brings the following benefits:
- Removes dependency on CryptoAPI (legacy API) respectively advapi32.dll
- CryptoAPI Cryptographic Service Providers (rsa full) are not dynamically loaded.
- Allows Universal Windows Platform (UWP) apps to use openssl (CryptGenRandom is not available for Windows store apps)
Reviewed-by: NMatt Caswell <matt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1142)

Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>