Remove all the functions and dead code that is now no longer required as
a result of the DTLS client move into the new state machine code.
Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Move all DTLS client side processing into the new state machine code. A
subsequent commit will clean up the old dead code.
Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Create a dtls_get_message function similar to the old dtls1_get_message but
in the format required for the new state machine code. The old function will
eventually be deleted in later commits.
Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Remove redundant code following moving client side TLS handling to the new
state machine implementation.
Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

This swaps the implementation of the client TLS state machine to use the
new state machine code instead.
Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

The new state machine code will split up the reading and writing of
hanshake messages into discrete phases. In order to facilitate that the
existing "get" type functions will be split into two halves: one to get
the message and one to process it. The "send" type functions will also have
all work relating to constructing the message split out into a separate
function just for that. For some functions there will also be separate
pre and post "work" phases to prepare or update state.
Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

This is the first drop of the new state machine code.

The rewrite has the following objectives:
- Remove duplication of state code between client and server
- Remove duplication of state code between TLS and DTLS
- Simplify transitions and bring the logic together in a single location
  so that it is easier to validate
- Remove duplication of code between each of the message handling functions
- Receive a message first and then work out whether that is a valid
  transition - not the other way around (the other way causes lots of issues
  where we are expecting one type of message next but actually get something
  else)
- Separate message flow state from handshake state (in order to better
  understand each)
  - message flow state = when to flush buffers; handling restarts in the
    event of NBIO events; handling the common flow of steps for reading a
    message and the common flow of steps for writing a message etc
  - handshake state = what handshake message are we working on now
- Control complexity: only the state machine can change state: keep all
  the state changes local to a file

This builds on previous state machine related work:
- Surface CCS processing in the state machine
- Version negotiation rewrite
Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

The function ssl3_get_message gets a whole message from the underlying bio
and returns it to the state machine code. The new state machine code will
split this into two discrete steps: get the message header and get the
message body. This commit splits the existing function into these two
sub steps to facilitate the state machine implementation.
Reviewed-by: NTim Hudson <tjh@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Signed-off-by: NKurt Roeckx <kurt@roeckx.be>
Reviewed-by: NRich Salz <rsalz@akamai.com>

MR #1276, RT #4107

If something was "present in all versions" of SSLeay, or if it was
added to a version of SSLeay (and therefore predates OpenSSL),
remove mention of it.  Documentation history now starts with OpenSSL.

Remove mention of all history before OpenSSL 0.9.8, inclusive.

Remove all AUTHOR sections.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Old API for use with OpenSSL-0.9.6.  Remove it.
Reviewed-by: NTim Hudson <tjh@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NStephen Henson <steve@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NKurt Roeckx <kurt@openssl.org>

RT#4081
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

0 is a valid file descriptor.

RT#4068
Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Previous language was unclear.  New language isn't pretty but I believe
it is more accurate.
Signed-off-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NBen Laurie <ben@openssl.org>
Reviewed-by: NRichard Levitte <levitte@openssl.org>

[fixes github issue #447]
Reviewed-by: NTim Hudson <tjh@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Configure has, so far, had no control at all of which 'no-' options it
can be given.  This means that, for example, someone could configure
with something absurd like 'no-stack' and then watch the build crumble
to dust...  or file a bug report.

This introduces some sanity into the possible choices.

The added list comes from looking for the explicit ones used in
Configure, and from grepping after OPENSSL_NO_ in all source files.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>

Because the default error macro generator assumes the header file with
error macros is in include/openssl and therefore generates a C file
with error texts that include <openssl/{name}.h>, we need to generate
the error macros and texts for CT separately, since the CT module
doesn't follow the default criteria.
Reviewed-by: NMatt Caswell <matt@openssl.org>

The function SSLv23_server_method() is an old name. New code should use
TLS_server_method() instead. Therefore don't use SSLv23_server_method() in
an example in the docs.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Change the sanity check in PACKET_buf_init to check for excessive length
buffers, which should catch the interesting cases where len has been cast
from a negative value whilst avoiding any undefined behaviour.

RT#4094
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Rename it to ct_int.h
Reviewed-by: NRich Salz <rsalz@openssl.org>

Check for Host header in query_responder instead of process_responder. This
also fixes a memory leak in the old code if the headers was NULL.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NTim Hudson <tjh@openssl.org>