- 13 3月, 2016 1 次提交
-
-
由 Emilia Kasper 提交于
ccache + clang produces a false strcmp warning, see https://llvm.org/bugs/show_bug.cgi?id=20144 Since this only happens with ccache and --strict-warnings, and only with certain versions of glibc / clang, disabling ccache is a reasonable short-term workaround. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 12 3月, 2016 13 次提交
-
-
由 Emilia Kasper 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Rich Salz 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Richard Levitte 提交于
While insignificant on Unix like systems, this is significant on systems like VMS. Reviewed-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Richard Levitte 提交于
It turns out that different sed implementations treat -i differently to cause issues. make it simpler by avoiding it entirely and give perl the trust to be consistent enough. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
That doesn't change even to make a dummy to hide its unavailability. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Matt Caswell 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Matt Caswell 提交于
On Windows we call WSAGetLastError() to find out the last error that happened on a socket operation. We use this to find out whether we can retry the operation or not. You are supposed to call this immediately however in a couple of places we logged an error first. This can end up making other Windows system calls to get the thread local error state. Sometimes that can clobber the error code, so if you call WSAGetLastError() later on you get a spurious response and the socket operation looks like a fatal error. Really we shouldn't be logging an error anyway if its a retryable issue. Otherwise we could end up with stale errors on the error queue. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Mat 提交于
verified that build succeeds without the extra define Reviewed-by: NRichard Levitte <levitte@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Mat 提交于
Fix no-blake2 for Windows classic build Reviewed-by: NRichard Levitte <levitte@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
The issue is demonstrated as follows: On Linux: $ echo ': foo.h /usr/include/stddef.h bar.h' | sed -e 's/ \/\(\\.\|[^ ]\)*//g' : foo.h bar.h On MacOS X: $ echo ': foo.h /usr/include/stddef.h bar.h' | sed -e 's/ \/\(\\.\|[^ ]\)*//g' : foo.husr/include/stddef.h bar.h Perl is more consistent: On Linux: $ echo ': foo.h /usr/include/stddef.h bar.h' | perl -pe 's/ \/(\\.|[^ ])*//g;' : foo.h bar.h On MacOS X: $ echo ': foo.h /usr/include/stddef.h bar.h' | perl -pe 's/ \/(\\.|[^ ])*//g;' : foo.h bar.h Reviewed-by: NAndy Polyakov <appro@openssl.org>
-
由 Rich Salz 提交于
Reviewed-by: NEmilia Käsper <emilia@openssl.org>
-
- 11 3月, 2016 26 次提交
-
-
由 Kurt Roeckx 提交于
Reviewed-by: NAndy Polyakov <appro@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Kurt Roeckx 提交于
They are not numbers in the machine byte order. Reviewed-by: NAndy Polyakov <appro@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Kurt Roeckx 提交于
Reviewed-by: NAndy Polyakov <appro@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Bill Cox 提交于
Reviewed-by: NAndy Polyakov <appro@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Andy Polyakov 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Andy Polyakov 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Andy Polyakov 提交于
If pre-processor failed, an empty .s file could be left behind, which could get successfully compiled if one simply re-ran make and cause linking failures. Not anymore. Remove even intermediate .S in case of pre-processor failure. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Andy Polyakov 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Rob Percival 提交于
Reviewed-by: NEmilia Käsper <emilia@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Rob Percival 提交于
Reviewed-by: NEmilia Käsper <emilia@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Matt Caswell 提交于
Running test_ssl with HARNESS_VERBOSE results in lots of spurious warnings about an inability to load the CT config file. This fixes it. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Richard Levitte 提交于
Issue identified on Solaris by Erik Forsberg <erik@efca.com> Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Matt Caswell 提交于
During auto de-init we were calling ENGINE_cleanup(), and then later CONF_modules_free(). However the latter function can end up calling engine code, which can lead to a use of the global_engine_lock after it has already been freed. Therefore we should swap the calling order of these two functions. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Mat 提交于
no-ripemd was unified a while ago but the change was not done in mk1mf.pl. This commit changes the no-ripemd string to no-rmd160 which fixes the no-rmd160 classic build. Reviewed-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Richard Levitte 提交于
Experience has shown that dynamic engines with their own copy of libcrypto is problematic, so we disable that possibility. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
由 Richard Levitte 提交于
One of them didn't clean away .d.tmp files properly. The other would overwrite the .d files unconditionally, thereby causing a possibly unnecessary dependency rebuild, which touches the date of Makefile, which causes a possibly unnecessary rebuild of buildinf.h and everything that depends on that. Reviewed-by: NAndy Polyakov <appro@openssl.org>
-
由 Matt Caswell 提交于
A few things were out of date and a few things were missing. Also some formatting updates. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Richard Levitte 提交于
Some of these scripts would recognise an output parameter if it looks like a file path. That works both in both the classic and new build schemes. Some fo these scripts would only recognise it if it's a basename (i.e. no directory component). Those need to be corrected, as the output parameter in the new build scheme is more likely to contain a directory component than not. Reviewed-by: NAndy Polyakov <appro@openssl.org>
-
由 Richard Levitte 提交于
A few were missed in the previous commit. Closes RT#4412 Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Rob Percival 提交于
Use SSL_get_SSL_CTX instead of passing SSL_CTX to s_client.c:print_stuff Reviewed-by: NEmilia Käsper <emilia@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Rob Percival 提交于
Pass entire CTLOG_STORE to SCT_print, rather than just the SCT's CTLOG SCT_print now looks up the correct CT log for you. Reviewed-by: NEmilia Käsper <emilia@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Rob Percival 提交于
Remove 'log' field from SCT and related accessors In order to still have access to an SCT's CTLOG when calling SCT_print, SSL_CTX_get0_ctlog_store has been added. Improved documentation for some CT functions in openssl/ssl.h. Reviewed-by: NEmilia Käsper <emilia@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
Closes RT#4406 Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NStephen Henson <steve@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NStephen Henson <steve@openssl.org>
-