Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

This adds support for the ASN.1 structures in draft-josefsson-scrypt-kdf-03
Private keys encrypted by scrypt can now be decrypted transparently as long
as they don't exceed the memory limits.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Typedef STRINT_PAIR to be the same as OPT_PAIR, and use that structure and
a bunch of tables instead of switch statements to lookup various values
out of the SSL/TLS message buffers.  Shrinks a bunch of code.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

40 bit ciphers are limited to 512 bit RSA, 56 bit ciphers to 1024 bit.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Also reorder preferences to prefer prime curves to binary curves, and P-256 to everything else.

The result:

$ openssl s_server -named_curves "auto"

This command will negotiate an ECDHE ciphersuite with P-256:

$ openssl s_client

This command will negotiate P-384:

$ openssl s_client -curves "P-384"

This command will not negotiate ECDHE because P-224 is disabled with "auto":

$ openssl s_client -curves "P-224"
Reviewed-by: NKurt Roeckx <kurt@openssl.org>
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

- Do not advise generation of DH parameters with dsaparam to save
computation time.
- Promote use of custom parameters more, and explicitly forbid use of
built-in parameters weaker than 2048 bits.
- Advise the callback to ignore <keylength> - it is currently called
with 1024 bits, but this value can and should be safely ignored by
servers.
Reviewed-by: NRich Salz <rsalz@openssl.org>

The default bitlength is now 2048. Also clarify that either the number
of bits or the generator must be present:

$ openssl dhparam -2
and
$ openssl dhparam 2048
generate parameters but
$ openssl dhparam
does not.
Reviewed-by: NMatt Caswell <matt@openssl.org>

Reviewed-by: NEmilia Käsper <emilia@openssl.org>

Add scrypt test support to evp_test and add test values from
from draft-josefsson-scrypt-kdf-03.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Add scrypt algorithm as described in draft-josefsson-scrypt-kdf-03
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRichard Levitte <levitte@openssl.org>

BLKINIT optimization worked on T4, but for some reason appears "too
aggressive" for T3 triggering intermiitent EC failures. It's not clear
why only EC is affected...
Reviewed-by: NTim Hudson <tjh@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Signed-off-by: NRich Salz <rsalz@openssl.org>
Reviewed-by: NMatt Caswell <matt@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

Move per-connection state out of the CERT structure: which should just be
for shared configuration data (e.g. certificates to use).

In particular move temporary premaster secret, raw ciphers, peer signature
algorithms and shared signature algorithms.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Rewrite and tidy ASN1_INTEGER and ASN1_ENUMERATED handling.

Remove code duplication.

New functions to convert between int64_t and ASN.1 types without the
quirks of the old long conversion functions.

Add documentation.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

More miscellaneous updates to version negotiation following feedback.
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Move these functions into t1_clnt.c, t1_srvr.c and t1_meth.c and take
advantage of the existing tls1_get*_method() functions that all the other
methods are using. Since these now have to support SSLv3 anyway we might
as well use the same set of get functions for both TLS and SSLv3.
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Miscellaneous updates following review comments on the version negotiation
rewrite patches.
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Update various documentation references to the new TLS_*_method names. Also
add a CHANGES entry.
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Following the version negotiation rewrite all of the previous code that was
dedicated to version negotiation can now be deleted - all six source files
of it!!
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

Continuing from the previous commit this changes the way we do client side
version negotiation. Similarly all of the s23* "up front" state machine code
has been avoided and again things now work much the same way as they already
did for DTLS, i.e. we just do most of the work in the
ssl3_get_server_hello() function.
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

This commit changes the way that we do server side protocol version
negotiation. Previously we had a whole set of code that had an "up front"
state machine dedicated to the negotiating the protocol version. This adds
significant complexity to the state machine. Historically the justification
for doing this was the support of SSLv2 which works quite differently to
SSLv3+. However, we have now removed support for SSLv2 so there is little
reason to maintain this complexity.

The one slight difficulty is that, although we no longer support SSLv2, we
do still support an SSLv3+ ClientHello in an SSLv2 backward compatible
ClientHello format. This is generally only used by legacy clients. This
commit adds support within the SSLv3 code for these legacy format
ClientHellos.

Server side version negotiation now works in much the same was as DTLS,
i.e. we introduce the concept of TLS_ANY_VERSION. If s->version is set to
that then when a ClientHello is received it will work out the most
appropriate version to respond with. Also, SSLv23_method and
SSLv23_server_method have been replaced with TLS_method and
TLS_server_method respectively. The old SSLv23* names still exist as
macros pointing at the new name, although they are deprecated.

Subsequent commits will look at client side version negotiation, as well of
removal of the old s23* code.
Reviewed-by: NKurt Roeckx <kurt@openssl.org>

And remove a duplicate comment, probably from a merge hiccup.
Reviewed-by: NMatt Caswell <matt@openssl.org>

Follow the same convention the other OPENSSL_NO_xxx header files
do, and use #error instead of making the header file be a no-op.
Reviewed-by: NMatt Caswell <matt@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>

crypto/cryptlib.h moved to crypto/include/internal; update
the script.
Reviewed-by: NRichard Levitte <levitte@openssl.org>

Reviewed-by: NRich Salz <rsalz@openssl.org>

The move of headers from crypto/ to crypto/include/internal/ needs
this extra inclusion directory or the build fails.
Reviewed-by: NRich Salz <rsalz@openssl.org>

There are header files in crypto/ that are used by a number of crypto/
submodules.  Move those to crypto/include/internal and adapt the
affected source code and Makefiles.

The header files that got moved are:

crypto/cryptolib.h
crypto/md32_common.h
Reviewed-by: NRich Salz <rsalz@openssl.org>

Added depencies on the public variants of some keys in test to Makefile.
Added the newly introduced key files from test/ in the list of files
to copy in util/pl/unix.pl.
Reviewed-by: NRich Salz <rsalz@openssl.org>

Reviewed-by: NMatt Caswell <matt@openssl.org>

There are header files in crypto/ that are used by the rest of
OpenSSL.  Move those to include/internal and adapt the affected source
code, Makefiles and scripts.

The header files that got moved are:

crypto/constant_time_locl.h
crypto/o_dir.h
crypto/o_str.h
Reviewed-by: NMatt Caswell <matt@openssl.org>