- 29 5月, 2015 3 次提交
-
-
由 Richard Levitte 提交于
The module loading feature got broken a while ago, so restore it, but have it a bit more explicit this time around. Reviewed-by: NStephen Henson <steve@openssl.org>
-
由 Richard Levitte 提交于
Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Rich Salz 提交于
Create app_load_config(), a routine to load config file. Remove the "always load config" from the main app. Change the places that used to load config to call the new common routine. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 26 5月, 2015 1 次提交
-
-
由 Hanno Böck 提交于
The "out" variable is used for both key and csr. Close it after writing the first one so it can be re-used when writing the other. Signed-off-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 11 5月, 2015 1 次提交
-
-
由 Rich Salz 提交于
Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 07 5月, 2015 1 次提交
-
-
由 Rich Salz 提交于
For the various string-compare routines (strcmp, strcasecmp, str.*cmp) use "strcmp()==0" instead of "!strcmp()" Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 02 5月, 2015 1 次提交
-
-
由 Rich Salz 提交于
After the finale, the "real" final part. :) Do a recursive grep with "-B1 -w [a-zA-Z0-9_]*_free" to see if any of the preceeding lines are an "if NULL" check that can be removed. Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 01 5月, 2015 2 次提交
-
-
由 Rich Salz 提交于
Don't check for NULL before calling free functions. This gets: ERR_STATE_free ENGINE_free DSO_free CMAC_CTX_free COMP_CTX_free CONF_free NCONF_free NCONF_free_data _CONF_free_data A sk_free use within OBJ_sigid_free TS_TST_INFO_free (rest of TS_ API was okay) Doc update for UI_free (all uses were fine) X509V3_conf_free X509V3_section_free X509V3_string_free Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
由 Rich Salz 提交于
Don't check for NULL before calling OPENSSL_free Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 26 4月, 2015 1 次提交
-
-
由 Rich Salz 提交于
Make setup_engine be a dummy if NO_ENGINE is enabled. The option is not enabled if NO_ENGINE is enabled, so the one "wasted" variable just sits there. Removes some variables and code. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 25 4月, 2015 1 次提交
-
-
由 Rich Salz 提交于
This is merges the old "rsalz-monolith" branch over to master. The biggest change is that option parsing switch from cascasding 'else if strcmp("-foo")' to a utility routine and somethin akin to getopt. Also, an error in the command line no longer prints the full summary; use -help (or --help :) for that. There have been many other changes and code-cleanup, see bullet list below. Special thanks to Matt for the long and detailed code review. TEMPORARY: For now, comment out CRYPTO_mem_leaks() at end of main Tickets closed: RT3515: Use 3DES in pkcs12 if built with no-rc2 RT1766: s_client -reconnect and -starttls broke RT2932: Catch write errors RT2604: port should be 'unsigned short' RT2983: total_bytes undeclared #ifdef RENEG RT1523: Add -nocert to fix output in x509 app RT3508: Remove unused variable introduced by b09eb246 RT3511: doc fix; req default serial is random RT1325,2973: Add more extensions to c_rehash RT2119,3407: Updated to dgst.pod RT2379: Additional typo fix RT2693: Extra include of string.h RT2880: HFS is case-insensitive filenames RT3246: req command prints version number wrong Other changes; incompatibilities marked with *: Add SCSV support Add -misalign to speed command Make dhparam, dsaparam, ecparam, x509 output C in proper style Make some internal ocsp.c functions void Only display cert usages with -help in verify Use global bio_err, remove "BIO*err" parameter from functions For filenames, - always means stdin (or stdout as appropriate) Add aliases for -des/aes "wrap" ciphers. *Remove support for IISSGC (server gated crypto) *The undocumented OCSP -header flag is now "-header name=value" *Documented the OCSP -header flag Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 28 3月, 2015 1 次提交
-
-
由 Rich Salz 提交于
EVP_.*free; this gets: EVP_CIPHER_CTX_free EVP_PKEY_CTX_free EVP_PKEY_asn1_free EVP_PKEY_asn1_set_free EVP_PKEY_free EVP_PKEY_free_it EVP_PKEY_meth_free; and also EVP_CIPHER_CTX_cleanup Reviewed-by: NKurt Roeckx <kurt@openssl.org>
-
- 11 3月, 2015 1 次提交
-
-
由 Rich Salz 提交于
Suggested by John Foley <foleyj@cisco.com>. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 24 1月, 2015 1 次提交
-
-
由 Rich Salz 提交于
Rename OPENSSL_SYSNAME_xxx to OPENSSL_SYS_xxx Remove MS_STATIC; it's a relic from platforms <32 bits. Reviewed-by: NAndy Polyakov <appro@openssl.org> Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 22 1月, 2015 2 次提交
-
-
由 Matt Caswell 提交于
This should be a one off operation (subsequent invokation of the script should not move them) Reviewed-by: NTim Hudson <tjh@openssl.org>
-
由 Matt Caswell 提交于
Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 13 1月, 2015 1 次提交
-
-
由 Rich Salz 提交于
This last one for this ticket. Removes WIN16. So long, MS_CALLBACK and MS_FAR. We won't miss you. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 06 1月, 2015 1 次提交
-
-
由 Matt Caswell 提交于
Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 31 12月, 2014 1 次提交
-
-
由 Tim Hudson 提交于
indent will not alter them when reformatting comments Reviewed-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 19 12月, 2014 1 次提交
-
-
由 Matt Caswell 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 11 12月, 2014 1 次提交
-
-
由 Rich Salz 提交于
I also replaced some exit/return wrappers in various programs (from main) to standardize on return. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 12 5月, 2014 1 次提交
-
-
由 Viktor Dukhovni 提交于
-
- 15 2月, 2014 1 次提交
-
-
由 Kurt Roeckx 提交于
If you use "-newkey rsa" it's supposed to read the default number of bits from the config file. However the value isn't used to generate the key, but it does print it's generating such a key. The set_keygen_ctx() doesn't call EVP_PKEY_CTX_set_rsa_keygen_bits() and you end up with the default set in pkey_rsa_init() (1024). Afterwards the number of bits gets read from the config file, but nothing is done with that anymore. We now read the config first and use the value from the config file when no size is given. PR: 2592
-
- 13 9月, 2013 1 次提交
-
-
由 Mat 提交于
-
- 05 12月, 2012 1 次提交
-
-
由 Dr. Stephen Henson 提交于
-
- 14 3月, 2010 1 次提交
-
-
由 Dr. Stephen Henson 提交于
-
- 12 3月, 2010 1 次提交
-
-
由 Dr. Stephen Henson 提交于
-
- 10 3月, 2010 1 次提交
-
-
由 Dr. Stephen Henson 提交于
-
- 05 10月, 2009 1 次提交
-
-
由 Dr. Stephen Henson 提交于
-
- 28 7月, 2009 1 次提交
-
-
由 Dr. Stephen Henson 提交于
-
- 27 4月, 2009 1 次提交
-
-
由 Dr. Stephen Henson 提交于
-
- 15 4月, 2009 1 次提交
-
-
由 Dr. Stephen Henson 提交于
-
- 08 10月, 2008 1 次提交
-
-
由 Dr. Stephen Henson 提交于
and should avoid any OS date limitations such as the year 2038 bug.
-
- 04 6月, 2008 1 次提交
-
-
由 Ben Laurie 提交于
-
- 13 5月, 2008 1 次提交
-
-
由 Dr. Stephen Henson 提交于
-
- 13 8月, 2007 1 次提交
-
-
由 Dr. Stephen Henson 提交于
-
- 14 6月, 2006 1 次提交
-
-
由 Bodo Möller 提交于
keygen API: make sure that 'pkey_type' is actually visible to MAIN().
-
- 05 6月, 2006 1 次提交
-
-
由 Dr. Stephen Henson 提交于
-
- 16 5月, 2006 1 次提交
-
-
由 Dr. Stephen Henson 提交于
been processed. This allows any ENGINE changing operations to be processed first (for example a config file).
-
- 12 5月, 2006 1 次提交
-
-
由 Dr. Stephen Henson 提交于
-