- 18 5月, 2016 1 次提交
-
-
由 Rich Salz 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org> Reviewed-by: NKurt Roeckx <kurt@openssl.org>
-
- 12 5月, 2016 1 次提交
-
-
由 Dr. Stephen Henson 提交于
RT#4403 Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
- 03 5月, 2016 2 次提交
-
-
由 TJ Saunders 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org>
-
由 TJ Saunders 提交于
If no serverinfo extension is found in some cases, do not abort the handshake, but simply omit/skip that extension. Check for already-registered serverinfo callbacks during serverinfo registration. Update SSL_CTX_use_serverinfo() documentation to mention the need to reload the same serverinfo per certificate, for servers with multiple server certificates. Reviewed-by: NRichard Levitte <levitte@openssl.org> Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 03 3月, 2016 1 次提交
-
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 29 2月, 2016 1 次提交
-
-
由 Dr. Stephen Henson 提交于
Add X25519 to TLS supported curve list. Reject attempts to configure keys which cannot be used for signing. Reviewed-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NEmilia Käsper <emilia@openssl.org>
-
- 27 1月, 2016 1 次提交
-
-
由 Rich Salz 提交于
This was done by the following find . -name '*.[ch]' | /tmp/pl where /tmp/pl is the following three-line script: print unless $. == 1 && m@/\* .*\.[ch] \*/@; close ARGV if eof; # Close file to reset $. And then some hand-editing of other files. Reviewed-by: NViktor Dukhovni <viktor@openssl.org>
-
- 20 1月, 2016 1 次提交
-
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 01 1月, 2016 1 次提交
-
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 20 12月, 2015 1 次提交
-
-
由 Dr. Stephen Henson 提交于
Remove all fixed DH ciphersuites and associated logic. Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 20 11月, 2015 1 次提交
-
-
由 Matt Caswell 提交于
There are lots of calls to EVP functions from within libssl There were various places where we should probably check the return value but don't. This adds these checks. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 11 11月, 2015 1 次提交
-
-
由 Matt Caswell 提交于
The new function SSL_use_certificate_chain_file was always crashing in the internal function use_certificate_chain_file because it would pass a NULL value for SSL_CTX *, but use_certificate_chain_file would unconditionally try to dereference it. Reviewed-by: NStephen Henson <steve@openssl.org>
-
- 03 10月, 2015 1 次提交
-
-
由 Rich Salz 提交于
Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 30 9月, 2015 1 次提交
-
-
由 David Woodhouse 提交于
Much related/similar work also done by Ivan Nestlerode <ivan.nestlerode@sonos.com> +Replace FILE BIO's with dummy ops that fail. +Include <stdio.h> for sscanf() even with no-stdio (since the declaration is there). We rely on sscanf() to parse the OPENSSL_ia32cap environment variable, since it can be larger than a 'long'. And we don't rely on the availability of strtoull(). +Remove OPENSSL_stderr(); not used. +Make OPENSSL_showfatal() do nothing (currently without stdio there's nothing we can do). +Remove file-based functionality from ssl/. The function prototypes were already gone, but not the functions themselves. +Remove unviable conf functionality via SYS_UEFI +Add fallback definition of BUFSIZ. +Remove functions taking FILE * from header files. +Add missing DECLARE_PEM_write_fp_const +Disable X509_LOOKUP_hash_dir(). X509_LOOKUP_file() was already compiled out, so remove its prototype. +Use OPENSSL_showfatal() in CRYPTO_destroy_dynlockid(). +Eliminate SRP_VBASE_init() and supporting functions. Users will need to build the verifier manually instead. +Eliminate compiler warning for unused do_pk8pkey_fp(). +Disable TEST_ENG_OPENSSL_PKEY. +Disable GOST engine as is uses [f]printf all over the place. +Eliminate compiler warning for unused send_fp_chars(). Signed-off-by: NRich Salz <rsalz@akamai.com> Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 17 9月, 2015 1 次提交
-
-
由 Kurt Roeckx 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org> MR #1128
-
- 01 9月, 2015 1 次提交
-
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 23 5月, 2015 1 次提交
-
-
由 Matt Caswell 提交于
Given the pervasive nature of TLS extensions it is inadvisable to run OpenSSL without support for them. It also means that maintaining the OPENSSL_NO_TLSEXT option within the code is very invasive (and probably not well tested). Therefore it is being removed. Reviewed-by: NRich Salz <rsalz@openssl.org> Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 19 5月, 2015 1 次提交
-
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 09 5月, 2015 1 次提交
-
-
由 Dr. Stephen Henson 提交于
Add SSL_use_certiicate_chain file functions: this is works the same way as SSL_CTX_use_certificate_chain_file but for an SSL structure. Update SSL_CONF code to use the new function. Update docs. Update ordinals. Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 02 5月, 2015 1 次提交
-
-
由 Rich Salz 提交于
After the finale, the "real" final part. :) Do a recursive grep with "-B1 -w [a-zA-Z0-9_]*_free" to see if any of the preceeding lines are an "if NULL" check that can be removed. Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 01 5月, 2015 1 次提交
-
-
由 Rich Salz 提交于
Don't check for NULL before calling a free routine. This gets X509_.*free: x509_name_ex_free X509_policy_tree_free X509_VERIFY_PARAM_free X509_STORE_free X509_STORE_CTX_free X509_PKEY_free X509_OBJECT_free_contents X509_LOOKUP_free X509_INFO_free Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 17 4月, 2015 1 次提交
-
-
由 Viktor Dukhovni 提交于
Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 25 3月, 2015 1 次提交
-
-
由 Rich Salz 提交于
This commit handles BIO_ACCEPT_free BIO_CB_FREE BIO_CONNECT_free BIO_free BIO_free_all BIO_vfree Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 23 3月, 2015 1 次提交
-
-
由 Matt Caswell 提交于
Ensure that all functions have their return values checked where appropriate. This covers all functions defined and called from within libssl. Reviewed-by: NRichard Levitte <levitte@openssl.org>
-
- 15 3月, 2015 1 次提交
-
-
由 Kurt Roeckx 提交于
It created the cert structure in SSL_CTX or SSL if it was NULL, but they can never be NULL as the comments already said. Reviewed-by: NDr. Stephen Henson <steve@openssl.org>
-
- 29 1月, 2015 1 次提交
-
-
由 Richard Levitte 提交于
Reviewed-by: NRich Salz <rsalz@openssl.org>
-
- 22 1月, 2015 1 次提交
-
-
由 Matt Caswell 提交于
Reviewed-by: NTim Hudson <tjh@openssl.org>
-
- 11 12月, 2014 1 次提交
-
-
由 Jonas Maebe 提交于
serverinfo_process_buffer: check result of realloc(ctx->cert->key->serverinfo) and don't leak memory if it fails Signed-off-by: NKurt Roeckx <kurt@roeckx.be> Reviewed-by: NMatt Caswell <matt@openssl.org>
-
- 29 8月, 2014 5 次提交
-
-
由 Dr. Stephen Henson 提交于
Reviewed-by: NEmilia Käsper <emilia@openssl.org>
-
由 Dr. Stephen Henson 提交于
Instead of SSL_CTX_set_custom_cli_ext and SSL_CTX_set_custom_srv_ext use SSL_CTX_add_client_custom_ext and SSL_CTX_add_server_custom_ext. Reviewed-by: NEmilia Käsper <emilia@openssl.org>
-
由 Dr. Stephen Henson 提交于
Support separate parse and add callback arguments. Add new callback so an application can free extension data. Change return value for send functions so < 0 is an error 0 omits extension and > 0 includes it. This is more consistent with the behaviour of other functions in OpenSSL. Modify parse_cb handling so <= 0 is an error. Make SSL_CTX_set_custom_cli_ext and SSL_CTX_set_custom_cli_ext argument order consistent. NOTE: these changes WILL break existing code. Remove (now inaccurate) in line documentation. Reviewed-by: NEmilia Käsper <emilia@openssl.org>
-
由 Dr. Stephen Henson 提交于
Use "parse" and "add" for function and callback names instead of "first" and "second". Change arguments to callback so the extension type is unsigned int and the buffer length is size_t. Note: this *will* break existing code. Reviewed-by: NEmilia Käsper <emilia@openssl.org>
-
由 Dr. Stephen Henson 提交于
Since sanity checks are performed for all custom extensions the serverinfo checks are no longer needed. Reviewed-by: NEmilia Käsper <emilia@openssl.org>
-
- 09 8月, 2014 1 次提交
-
-
由 Viktor Szakats 提交于
The "unsigned char *d" should be const. Reviewed-by: NKurt Roeckx <kurt@roeckx.be>
-
- 28 3月, 2014 1 次提交
-
-
由 Dr. Stephen Henson 提交于
Security callback: selects which parameters are permitted including sensible defaults based on bits of security. The "parameters" which can be selected include: ciphersuites, curves, key sizes, certificate signature algorithms, supported signature algorithms, DH parameters, SSL/TLS version, session tickets and compression. In some cases prohibiting the use of a parameters will mean they are not advertised to the peer: for example cipher suites and ECC curves. In other cases it will abort the handshake: e.g DH parameters or the peer key size. Documentation to follow...
-
- 06 2月, 2014 3 次提交
-
-
由 Ben Laurie 提交于
-
由 Scott Deboy 提交于
Whitespace fixes
-
由 Scott Deboy 提交于
If multiple TLS extensions are expected but not received, the TLS extension and supplemental data 'generate' callbacks are the only chance for the receive-side to trigger a specific TLS alert during the handshake. Removed logic which no-op'd TLS extension generate callbacks (as the generate callbacks need to always be called in order to trigger alerts), and updated the serverinfo-specific custom TLS extension callbacks to track which custom TLS extensions were received by the client, where no-ops for 'generate' callbacks are appropriate.
-
- 04 1月, 2014 1 次提交
-
-
由 Dr. Stephen Henson 提交于
Fix a limitation in SSL_CTX_use_certificate_chain_file(): use algorithm specific chains instead of the shared chain. Update docs.
-
- 25 9月, 2013 1 次提交
-
-
由 Ben Laurie 提交于
Conflicts: apps/s_server.c
-